remap_cache currently does not work, so enabling the MMU in the
PBL currently does not make sense. Disable it for now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
via -r opt, global.dhcp.retries or dhcp_retries
set the priority order;
This will allow to do not stay infinite loop if no dhcp available
for boot sequence as example
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This will allow to only update a var if recive a valid data.
This is need for hostname.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This way you can specify as previously set the dhcp parameter via global.dhcp.xxx
and get the result via global.dhcp.xxx
This is need for the defaultenv-2 to add the bootp suppport.
Use it on defaultenv too to have only one set of var.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
since 99e72c8bbd on an i.MX51 based board,
I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
the PHY to early and gets 0x3ffff which leads to the wrong capabilities
setting.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to do not have 2 set of var for defaultenv and the new
defaultenv-2.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The following missed to add a jump to board_init_lowlevel_return for the
phycard pca100 board:
| commit 244198ea8b
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sun Jul 8 18:30:42 2012 +0200
|
| ARM boards: Use _text rather than TEXT_BASE
|
| With compressed image support TEXT_BASE will become the base
| address of the uncompressed image. What the boards want instead
| is the base address of the decompressor code or, if not compressed,
| the base address of the uncompressed image. Use _text which is
| the correct one for both cases.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes it by adding the jump. Also imx_nand_load_image is directly
called from lowlevel_init.S which fixes compilation with pbl support
enabled.
Tested with both compression enabled and disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Booting from SPI on an AM35xx (and possibly other TI SOCs) requires
a special format:
- 32 bit image size in big-endian
- 32 bit load address in big-endian
- binary image converted from little- to big-endian
The mk-am35xx-spi-image tool converts barebox.bin to
this format.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is mostly useful during the initial port of barebox to a new
board which is supported by u-boot. It also allows starting barebox
from a SRAM-based u-boot SPL.
A different load address can be set like this:
make barebox.uimage UIMAGE_BASE=0x80000000
Also add barebox.ubl to CLEAN_FILES.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also pass flags using platform_data and remove useless casts from void*.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The _send function should not return the length of the transmitted packet.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The timeout for wating for the bus to be idle is too short when the
card does internal garbage collection. This was triggered with filling
an SD card under Linux with /dev/urandom, then doing a saveenv under
barebox afterwards.
Linux has timeouts here up to 300ms. Use a second to be safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cfa10036 board file were missing the length parameter when adding
devices. This made barebox crash early in the boot, in the mxs-mci
driver.
Provide the resources lengths in a consistent format.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old tftp suppoer has been replaced with filesystem based tftp
support, so remove the old code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Traditionally tftp is a command of its own. Since we can
mount tftp as a filesystem we have duplicated the tftp code, the old
code is used by the tftp command, the new by the filesystem support.
This adds a tftp command based on the filesystem support to preserve
backward compatibility. This allows us to remove the old tftp support
in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The dependencies for generating the environment do not work properly:
- If files are removed from the defaultenv, a subsequent make will not
update the default environment.
- If CONFIG_DEFAULT_ENVIRONMENT_PATH changes, the default environment
also will not be regenerated.
This patch fixes this by introducing a cmd_env which has the content of
$(ENV_FILES) in the command so that the if_changed mechanism recognizes
a change when $(ENV_FILE) changes. This also results in a nice " ENV "
string in the build process.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CLEAN_FILES in common/Makefile are unused. All generated files
are removed from the toplevel Makefile.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some SoCs (for example AM35xx), the ROM bootloader passes useful
information in r0 when jumping to barebox.
To avoid overwriting this in the generic reset code, we introduce
common_reset as a C function and as an assembler macro. This is then
called form the reset entry point (either in common or in board code).
This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is unused now and not needed. We have a board_init_lowlevel. If a
board needs some architecture setup it can always call it from its
board_init_lowlevel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OMAP3 is the only architecture which has a arch_init_lowlevel in
which it invalidates the dcache. This can easily be done in
board_init_lowlevel aswell. Since on OMAP3 we are always executed
in SRAM we'll never need a board specific lowlevel_init. So the
easiest way of getting rid of this special handling is to just
rename the function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 5888a3b5c9 accidentally changed
this to printf.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
vicencb@gmail.com
Jean-Christophe PLAGNIOL-VILLARD
Eric Bénard
Jan Luebbe
Maxime Ripard