For splashscreen support on pcm049, this patch adds omap4 framebuffer
platform data and configures display pd050vl1, g104x1, pm070wl4, pd104slf,
edt_etm0350G0dh6, edt_etm0430G0dh6, edt_etmv570G2dhu and edt_etm0700G0dh6
Also add extra muxing and defconfig
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only UART clocks are included for now, but the code should cover
other peripherals needs, too.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This removes the existing Tegra CAR driver and replaces it with code
ported from the Linux clock framework.
In the current state only the relevant PLLs are supported, but this is
no functional regression from the existing code.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to properly bring up the system PLLs we need a reliable
clocksource. To break the circular dependency between the clocksource
and the CAR driver, get the OSC frequency with a lowlevel function.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a nearly full-blown config for the v7 i.MX (i.MX51, i.MX53 and
i.MX6).
currently the following images are built:
barebox-imx51-babbage.img
barebox-imx53-loco.img
barebox-imx6-realq7.img
barebox-genesi-efikasb.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In principle we could build barebox for multiple i.MX SoCs, so
select the correct SoC from the board selection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts the Freescale i.MX53 loco aka qsb board to
multi image. The image will be named:
barebox-freescale-imx53-loco.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This also converts the Phytec phyCORE i.MX27 aka pcm038 to use
image compression. The image will be named
barebox-phytec-phycore-imx27.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the make infrastructure to build multiple SoC or
board specific images from a single barebox binary.
The basic idea is that we no longer have a single pbl, but instead
multiple pbls, one per image if necessary. Each pbl is defined
by its entry function so that each pbl can do exactly what a given
board needs. Additionally the pbls together with a self extracting
barebox binary can be encapsulated in specific image formats.
squashed in build fixes from Lucas Stach for make version >= 3.82:
Split Multimage Makefile rule in explicit and implicit parts
Fixes build with make version >=3.82
Frome the make 3.82 NEWS file:
* WARNING: Backward-incompatibility!
In previous versions of make it was acceptable to list one or more explicit
targets followed by one or more pattern targets in the same rule and it
worked "as expected". However, this was not documented as acceptable and if
you listed any explicit targets AFTER the pattern targets, the entire rule
would be mis-parsed. This release removes this ability completely: make
will generate an error message if you mix explicit and pattern targets in
the same rule.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lucas Stach <dev@lynxeye.de>
The Marvell boards accidently add a .c instead of a .o file
to the targets. This has the side effect of breaking out of tree
compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
In the upcoming multi image build process we will cat images together.
To find the concatenated image we need to reliably find the end of the
current binary. This adds a dummy section at the end of a pbl binary.
Its only purpose is to mark the end of the image. The multi image
patches will add something to this section so that it doesn't get
discarded by the linker.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The upcoming multi image support will need devicetree binary
blobs even when there is no builtin dtb. Instead of depending
on CONFIG_BUILTIN_DTB depend on CONFIG_OFTREE and let this option
select DTC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the pbl linker script can be reused by the upcoming multi image
build process move it to a common place. Also remove ENTRY() from the
linker script and instead add the -e option to the linker. This makes
the entrypoint configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a new function __barebox_arm_head() which defines an
the regular barebox ARM header, but which jumps to the end of
the function so that this can be embedded into another function.
barebox_arm_head() now just uses it and jumps to barebox_arm_reset_vector
just like it did before.
This makes it possible to define board specific entry points.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Addionally to having a builtin DTB provide the possibility for
the board to provide a dtb via boarddata.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Philipp Zabel
Christoph Fritz
Lucas Stach
Sascha Hauer