Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is limited board support for the Freescale P2020RDB in single CPU
mode. The DDR is configured for a memory bus running at 667Mhz.
The system boots from NOR flash and provides the console at 115200
bauds, no other drivers are included.
Finally, the PPC Kconfig and make file make the building of
the P2020RDB platform firmware possible.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kconfig and Makefile allow to include the 85xx cpu support in the
compilation process.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
_text_base assignment has been removed earlier from lib/board.c
for the mpc5xxx.
For the 85xx, _text_base is set to where the firmware relocates
in memory as passed by the function input variable.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds initialization functions used by the e500v2 start-up code
and board specific code (L2 cache initialization).
Other functions help identify the CPU or return the programmed memory size.
Finally, the Makefile and Kconfig file are added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch contains functions that returns information on
the CPU and buses frequency (LBC, DDR, system).
It also includes the clock source driver.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes functions to initialize LAW registers and
the chip select 0 of the CPU.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch defines functions to set interrupt vector registers and
functions to handle hardware exceptions.
It also defines support functions to set and search TLBs.
Finally, the Makefile is added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the first part of the start-up code. The source code origin is
U-boot and is slightly modified to have e500v2 CPU support in 32-bit
mode only.
It includes the power-up entry point, CPU initialization code and
exports definition for D-cache flush and I-cache invalidate.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These header files are added to provide a minimal support to the
Freescale 85xx cpu to boot on a P2020RDB platform.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The trap relocation function trap_reloc can be used across several PPC
platforms and is added to the ppc library. Accordingly, the definition
of trap_reloc is removed from mach-mpc5xxx/start.S
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Following the MMIO primitives fix, the definitions of __raw_* function
is sourced from Linux and added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/ppc/Kconfig is reworked to make the configuration environment
architecture neutral. All MPC5200 configuration is moved to the
MPC5200 architecture specific configuration file. These modifications
are reflected in the PCM030 board support.
arch/ppc/Makefile compilation directives are updated in preparation
for the introduction of future cpus/machines.
lib/time.c is moved to the architecture specific directory and the
building instructions updated in the Make files. The file is
cleaned up of unused code.
The definition of L1_CACHE_... is updated and CACHELINE_SIZE is
defined in ppc/include/asm/cache.h for future use by the mpc85xx.
The file mach-mpc5xxx/pci_mpc5200.c and mach-mpc5xxx/start.S are
updated accordingly.
The declaration of search_exception_table is moved in
include/asm/common.h because it is used across architectures.
mach-mpc5xxx/traps.c is also updated to reflect this change.
The definition of exception in asm/ppc_asm.tmpl is updated for future
use by the mpc85xx. The file starts.S in mach-mpc5xxx is updated
accordingly.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device resources are much smaller, the resource mechanism
revealed this because of overlapping devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the bootm code to the new uimage code. Also
bootm can now handle other types of images than uImages.
Currently the only architecture making use of this is
arm which allows to boot zImages, raw images and barebox
images.
I intended to make a more bisectable series from this but
I failed becuase there are many dependencies and no matter
how I tried the patches grew bigger and and bigger. So I
decided to put this all in a single patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device resources are much smaller, the resource mechanism
revealed this because of overlapping devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All handlers used to just relocate the image without any checks, so
we are doomed if we write outside of SDRAM or will overwrite ourselves.
Move the relocation up to the generic part where we have a chance
of catching these issues.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never had interrupt support in barebox and we have no plans to
add interrupt support. Even if we do I doubt the current fragments
of irq support are helpful, so remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When building sandbox with ccache, one would hit warnings such as:
warning: 'struct mmsghdr' declared inside parameter list
on random files; a way to reproduce this issue is to build a simple
file doing just:
#include <sys/socket.h>
int main(void) {
return 0;
}
gcc -Wall -P -c -o foo foo.c
But actually the -P flag is only useful when generating non-C files,
such as linker scripts in the case of barebox. Removing the -P flag
from all the gcc invocations, except when generating .lds files makes
the warning go away. It turns out that this is what
linux/scripts/Makefile.build also does nowadays.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Marc Kleine-Budde
Antony Pavlov
Renaud Barbier
Alexander Shiyan
Loïc Minier
Jean-Christophe PLAGNIOL-VILLARD