This removes the existing Tegra CAR driver and replaces it with code
ported from the Linux clock framework.
In the current state only the relevant PLLs are supported, but this is
no functional regression from the existing code.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to reuse the clk gate code within other clocks.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linuxkernel with some small adjustments for barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS needs some special MXS specific clock types:
- pll
- ref (fractional divider)
- busy divider (divider with additional busy bit to poll on a rate change)
- lcdif (Combined clock out of a fractional divider, a divider and a gate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On MXS we need to poll the busy bit when changing a clock rate, but only
when the parent clocks are enabled. This exposes the already present
function clk_is_enabled which is suitable for this job.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows us to better detect whether a clk is enabled or not.
- If we can ask a clk, ask it. If it's enabled, go on and ask parents
- If we can't ask it, but it can be enabled, depend on the enable_count.
if it's positive, go on and ask parents
- If we can't ask it and it cannot be enabled, assume it is enabled
and ask parents.
This makes the CLK_ALWAYS_ENABLED unnecessary, since the fixed clk now
always returns 1 in its is_enabled callback.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox not contain symbol HAVE_CLK, so remove all references to it.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Current barebox clk framework allow disable any clock
and there is no means to prevent that.
But there are the clocks that can't be disabled
by software at all.
This patch allow registration of a clock immune to clk_disable().
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Checking for invalid clocks on function entry allows users
to for example do a clk_set_rate(clk_lookup("myclk"), x) without
checking for validity of the result of clk_lookup first.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds barebox common clk support loosely based on the Kernel common
clk support. differences are:
- barebox does not need prepare/unprepare
- no parent rate propagation for set_rate
- struct clk is not really encapsulated from the drivers
Along with the clk support we have support for some basic clk building
blocks:
- clk-fixed
- clk-fixed-factor
- clk-mux
- clk-divider
clk-fixed and clk-fixed-factor are completely generic, clk-mux and clk-divider
are currently the way i.MX muxes/dividers are implemented.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most clock/device associations can be done based on the physical
base address of the corresponding device. So instead of depending
on string matching add an optional possibility to associate a clock
lookups with physical addresses. This also has the advantage that
the lookups for devicetree based devices can be identical to the
platform based devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as refer in this patch "arm & sh: factorised duplicated clkdev.c"
factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.
as the code is identical at 99% in linux
move it also as preparing for the SH adding
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Lucas Stach
Juergen Beisert
Sascha Hauer
Antony Pavlov
Alexander Shiyan
Carlo Caione
Jean-Christophe PLAGNIOL-VILLARD