Needed to built the BCTs and bootable images.
Version 1.2 from https://github.com/NVIDIA/cbootimage.git
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mk-am35xx-spi-image can only build AM35xx images. Rename
the tool to mk-am3xxx-spi-image and add support for the AM33xx.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the crc32 command to be build
as host and optionally as target tool.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a tool for installing kernels according to the bootloader
spec. systemd already has a similar tool, but it is limited to installing
kernels on the currently running system. The barebox kernel-install
tool instead can also be used to install kernels on removable media on a
development host for cross development. It is compiled in two variants,
as 'kernel-install' for the host and as 'kernel-install-target' using
$CROSS_COMPILE.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
using obj-y for targetprogs only works until only a single program
is compiled. Adding the second one will end up in the linker trying
to link both together.
Add targetprogs-y to fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Altera SoCFPGAs expect a simple header for their first stage
loaders. This adds a tool to generate images for the SoCFPGAs. The
header is either embedded into the image or optionally prepended
to the image. In this case code is added to jump over the image
header.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to write the size of barebox at an offset of the binary
this is needed for ARM when using relocated binary
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds host tools for i.MX to generate the i.MX internal
flash header format and a tool to upload these images to an
i.MX SoC via USB.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This tool is used with Marvell EBU SoC to trigger the UART boot mode
provided by the SoC BootROM, and push the bootloader image to the
target using the Xmodem protocol.
It has been taken from the U-Boot source code, with minor
modifications to make it work with Armada 370/XP platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Marvell EBU SoCs (Kirkwood, Armada 370, Armada XP) have a BootROM
that understand a specific image format, composed of a main header,
several extension headers and a paylod. This image can be booted from
NAND, SPI, SATA, UART, NOR, etc.
This patch adds a tool that allows to extract the components and
configuration of existing images, and to create new images.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootrom only reads an image if the correct checksum is present in the
header. The calculation is pretty simple:
sum over all words from 0x20 to 0x44
Two of this words are the image length. That is why the checksum can not be
calculated until barebox_image_size is known.
The easiest solution is a program that has to be run after make.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Booting from SPI on an AM35xx (and possibly other TI SOCs) requires
a special format:
- 32 bit image size in big-endian
- 32 bit load address in big-endian
- binary image converted from little- to big-endian
The mk-am35xx-spi-image tool converts barebox.bin to
this format.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This image header is used for booting from SPI using the TI User
Boot Loader (UBL).
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bareboxenv script build for the target does not work on
all architectures, so make it optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To use barebox as a BIOS based bootloader for x86 architectures, the binary
must be patched to get it bootstrapped at runtime. The 'setupmbr' tool installs
the barebox-binary to the given device node or image file and patch it in
accordance to the needed sector information at runtime.
Signed-off by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Lucas Stach
Jan Luebbe
Michael Grzeschik
Alexander Aring
Jean-Christophe PLAGNIOL-VILLARD
Thomas Petazzoni
Steffen Trumtrar
Vicente
Alexey Galakhov
Michael Olbrich
Juergen Beisert
Robert P. J. Day
Sascha Hauer