Tabs in kconfig help text will create unwanted indention artefacs when
the help text is scrolled horizontally. Replacing tabs with spaces.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The evaluation boards EDB9302 and Olimex-CS-E9302 both use a
KS8721BL transceiver in default strapping which is phy_addr=1
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Passing phy configuration to the ep93xx_eth driver was not supported yet
and will be added with this patch. When no pdata is passed, the probably
broken default of phy_addr = 0 will be used to maintain compatibility
with the previous implementation.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
PHY like the ks8721bl used on the edb9302 and similar evaluation boards
will initially not respond to the ep93xx_phy_read/write functions when
the MII-preamble is supressed. The supression is switched on by default
and must be switched off by clearing bit 8, see also EP93xx Users guide.
Removing the orphaned MII_SUPPRESS_PREAMBLE config option, note:
setting MII_SUPPRESS_PREAMBLE would actually enable the preamble transmission.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add some documentation about fastboot 'flash' command and some useful
example how to use it to boot an initrd.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_request_mem_region returns a void * which shall be checked with
IS_ERR(), but in some cases the valid pointer returned clashes with
error values. This is especially the case on some Atmel SoCs.
This introduces dev_request_mem_resource which returns a struct resource
instead which in any case can be checked with IS_ERR(). It's the drivers
responsibility then to get the IOMEM pointer from the resource.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gpio has to be initialized with an invalid gpio number. 0 is a valid
number and it will be requested and used by the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Check if the given offset is valid for the mtd device. Print an error
message if not to inform the user in the command 'nand'.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently all fastboot flash commands with UBI images are handled by a
final call to 'ubiformat'. This only makes sense for flash commands
where the target file is a mtd device. If we just want to transfer a UBI
image we would expect a simple copy to the correct location.
This patch checks if the destination file is a MTD device by opening it
and calling an ioctl MEMGETINFO. Only for MTD devices, ubiformat is
called.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a function to check for the existence of an update handler
based on the supplied bbu_data.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bbu_data includes a devicefile information. Add the possibility to make
an update based on the given devicefile. This is in addition to the
normal search for a barebox update handler by its name.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It seems like there is a memory leak in an error path of
bootm_open_oftree_uimage() where the memory allocated for the fdt is not
released again.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If of_state_fixup() fails for some reason, boot/bootm will fail, too
However, it is completely unclear where the error has happened, and to
the user it rather seems like the kernel device tree loaded from some
file was broken/corrupt, not that in fact some fixup routine was
failing.
Adding a meaningful error message can help debugging significantly.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Unlike at24 (I2C), the at25 (spi) EEPROM driver doesn't check if the
device tree node contains partition definitions. This means that one
for example cannot have bootstate partitions on an at25 EEPROM, while it
works on an at24 EEPROM.
This patch adds device tree based partition support to the at25 driver.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch fixes this compiler's warning:
CC fs/ext4/ext4_common.o
fs/ext4/ext4_common.c:130:5: warning: no previous prototype for
'ext4fs_get_indir_block' [-Wmissing-prototypes]
int ext4fs_get_indir_block(struct ext2fs_node *node, struct
ext4fs_indir_block *indir, int blkno)
^
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Expand the \u escape sequence to the user currently set in the
$global.user variable.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use ARM_USE_COMPRESSED_DTB for all AM335x based board,
to reduce the image size even more.
Saves about 9kB in MLO image and 20kB in barebox image.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reduce even more size of beaglebone MLO device tree with stripping
the clocks.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use eeprom as name like in the kernel. This is needed if you use the
state framework.
phycard: also fix index, it has address 0x54
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit 764ae1647c ("ARM: i.MX: Add correct SoC type detection
for i.MX6") the definition of the function cpu_is_mx6q and cpu_is_mx6dl
has changed. Before that change they match the SoM family Quad/Dual and
DualLite/Solo. After that change they are SoM specific. They match only
Quad and DualLite. There are extra functions cpu_is_mx6d and cpu_is_mx6s
for SoM Dual and Solo.
We have not seen any real world consequences of this problem yet.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit 0ff58575c9 ("dts: update to v4.5-rc1") the compatible
"fsl,imx6q-gpt" was removed from imx6dl.dtsi. Now there is only the
Solo/DualLite specific compatible "fsl,imx6dl-gpt". Adapt the driver
for that change.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cpu_is_mx6* function for the i.MX6 Solo was missing. All other
functions are already defined.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code parsing the oftree and initrd file names is clearly wrong,
leading to bootm not loading oftree or initrd files any more.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This message was dropped when reorganizing the DT loading code,
and it's really confusing to miss this.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the i.MX6 crypto core CAAM with support for the random number
generator.
The core itself works with jobrings in which descriptors can be
queued/dequeued for processing. Depending on descriptor type
the CAAM unit then either produces random numbers or decrypts/encrypts
data.
The code is based on the Linux v4.1 driver of the same name
without all the crypto/hashing components.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the i.MX6 crypto core CAAM with support for the random number
generator.
The core itself works with jobrings in which descriptors can be
queued/dequeued for processing. Depending on descriptor type
the CAAM unit then either produces random numbers or decrypts/encrypts
data.
The code is based on the Linux v4.1 driver of the same name
without all the crypto/hashing components.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the last line in a config file has no newline then 'next' is NULL
on the the loop iteration. Check that before derefencing 'next'.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
RATP console selects RATP, which in turn selects CRC16, but those
chains don't work in Kconfig, so select CRC16 also from the
console option.
Also fix build errors by depending on CONSOLE_FULL and selecting
POLLER.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ramoops may be useful even without oftree support, as kernels
booted without a DT may have other means to reserve the
ramoops memory.
Fixes:
In function `ramoops_probe':
undefined reference to `of_add_reserve_entry'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add the following improvements:
- clarify commands vs. filesystems for network file transport protocols
- Beautify links with prosa text instead of standard headlines
- adapt 'devinfo eth0' parameter output to current code
- improve console texts
- add docs for netconsole.active
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>