so we can use dynamic number id with specific devname
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a USB console is registered on the command line it doesn't make
much sense to disable it in the core. Always enable the USB console
to make it usable without additional commands when registered.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
During debugging it sometimes helps to me even more verbose. This
adds an additional debug level for this. Also we remove an already
existing pr_vdebug definition in the USB gadget u_serial driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using the serial console over USB to download files, and
when the USB bandwidth is pushed to its limits, the barebox UDC
device won't be able to absorb all the traffic.
Modify the u_serial gadget so that if there is not enough room
in buffers, don't push USB requests down the gadget driver, so
that it is saturated, and give it a chance to NAK requests.
The previous behaviour was loosing bytes (as kfifo_put is lossy).
The fixed behavious is lossless (based on USB NAK protocol).
While at it, increase a bit buffer sizes to 8kB to absorb heavy
transfers such as a linux kernel image.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As USB can have its cable plugged out anytime, make the
serial gadget reliable in case of unplugging :
- unregister the gadget_serial provided console
- don't stay forever in the read loop if connection was cut
This behaviour relies on correct implementation of
usb_gadget_poll(), which should return an error if the USB
cable was removed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the generic gadget polling function instead of the
specific fsl function. This is a fix from a leftover in
gadget development.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to check for maximum argument counts. The commands are
safe to be called with more arguments, so lets safe some bytes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for USB devices. It uses
the Linux Kernel gadget API. Along with this patch
comes driver support for the Freescale (arc) USB OTG
Core and USB Device Firmware Update (DFU)
The serial gadget support is not working at the moment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
Sascha Hauer
Holger Schurig
Robert Jarzmik
Eric Bénard
Robert Jarzmik
Krzysztof Halasa