Do not call mtd_ioctl for mtdraw devices. mtd_ioctl will derefence
the priv pointer to a struct mtd_info whereas with mtdraw devices it will be
a struct mtdraw pointer. We do not need ioctls for mtdraw devices, so drop
it instead of fixing it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The name of the raw device is mtdraw<num> which is inconsistent to other
mtd devices which are named mtd<num>.<partname>. Rename it to mtd<num>.raw.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
actually ops.ooboffs is not defaulted so when its value gets
added to chip->oob_poi in nand_fill_oob or nand_transfer_oob
the respective memcpy is using a wrong address.
With this patch, both md -s /dev/nandraw0 and cp xyz /dev/nandraw0.sb
are working fine on an i.MX28 target (instead of crashing the board).
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While erasing bad blocks is a potentially dangerous operation
it is sometimes needed during development or when some foreign
code has touched the flash.
This patch adds a device parameter 'erasebad' to allow erasing
bad blocks. Since this is not wanted during production this is
behind a Kconfig option.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of dereferencing struct mtd_info members directly use
the wrapper functions which have an additional check if the
callback exists if it is optional, like mark_bad or is_bad.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to do not provide block_isbad at mtd driver level
as example spi flash
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
toread is unitialized. We have to use count instead.
| commit 992c291e95
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sat Sep 15 16:54:47 2012 +0200
|
| mtd mtdraw: Fix partial page read
|
| When reading parts of a page we have to limit the maximum bytes copied
| to the remaining bytes of a page.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When reading parts of a page we have to limit the maximum bytes copied
to the remaining bytes of a page.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
The mtdoob and mtdraw device don't clean up correctly.
Added a private data element to hold allocated memory.
Fix remove of mtdoob and mtdraw device.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When unaligned writes are used, typically doing a cp file /dev/mtdraw0.foo,
the alignement correction code was incorrectly handling such cases, and
didn't return the expected number of written bytes.
This was tested on a 528 block size.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a device to read and write to MTD data and oob
(/dev/mtdraw<N>).
The device is constrained in a separate source file, so that
further improvement of commands (such as nandwrite) could
make it useless, and easy to remove.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Eric Bénard
Jean-Christophe PLAGNIOL-VILLARD
Jan Luebbe
Alexander Aring
Robert Jarzmik