fixes: 81737c1 mtd: Fix erasing of devices >4GiB
Several places erased a complete flash partition passing ~0 as count to
erase(). With the above commit count to erase was changed from an unsigned
type to a signed type, so the (count > f->size - offset) check in
erase() no longer triggers and the ~0 count is no longer adjusted to the whole
device size. Among other things this results in saveenv failures on NOR
flashes.
This patch fixes this by introducing an explicit macro for erasing the
whole device which is tested for in erase(). All other negative values
are rejected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Giorgio <giorgio.nicole@arcor.de>
As a utility function for file handling make_directory() is well
suited for libfile. Move it there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
according to C99 standard, the definition of wchar_t
should go stddef.h
this patch also remove wchar_t local definition and
use stddef.h instead.
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
umount on Linux can be used on a mount pathes and device pathes. This
patch adds this functionality to barebox.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
This updated code supports recovering from unclean unmounts when write
buffer size is larger than 8. Linux uses takes information into
consideration when checking for writes.
The following list shows the changes for each file done compared to
u-boot v2016.03 code.
Makefile
* Add gc.o, do not include header as in u-boot
budget.c:
* Replace __UBOOT__ with __BAREBOX__
debug.c:
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
* Replace current->pid with 0
debug.h
* Replace __UBOOT__ with __BAREBOX__
* Add "0 &&" to ubifs_assert condition check
U-Boot essentially disabled pr_crit output and dump_stack() is defined
to do { } while (0), so ubifs_assert does nothing despite condition.
gc.c:
* Replace __UBOOT__ with __BAREBOX__
io.c:
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
key.h:
* No changes
log.c:
* No changes
lprops.c:
* Replace __UBOOT__ with __BAREBOX__
lpt.c
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
* Remove #include <ubi_uboot.h>
lpt_commit.c
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
master.c
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
* Remove #include <ubi_uboot.h>
misc.h
* Replace __UBOOT__ with __BAREBOX__
* Add #ifndef __BAREBOX__ around unneeded ubifs_current_time
orphan.c
* No changes
recovery.c
* Replace __UBOOT__ with __BAREBOX__
replay.c
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
sb.c
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
* Remove #include <ubi_uboot.h>
* rp_uid and rp_gid are still uid_t, not kuid_t, so remove .val
scan.c
* Replace __UBOOT__ with __BAREBOX__
super.c:
* Replaced current->pid with 0
* Replaced __UBOOT__ with __BAREBOX__
* Removed #include <ubi_uboot.h>
* Removed #include <memalign.h>
* Added #include <init.h>
* Replaced malloc_cache_aligned with kzalloc
* Replaced I_LOCK with I_SYNC
* i_uid and i_gid are still uid_t, not kuid_t, so remove .val
* Replaced string "U-Boot" with "Barebox"
* Add #ifndef __BAREBOX__ around open_ubi, sb_test, sb_set, ubifs_mount,
kill_ubifs_super, ubifs_fs_type
* Do not call ubi_open_volume or ubi_close_volume in ubifs_fill_super
Those will already be handled in ubifs_probe
* Replaced uboot_ubifs_mount with new ubifs_get_super implementation using
existing functions alloc_super, alloc_ubifs_info
tnc.c
* Replace __UBOOT__ with __BAREBOX__
* Remove #include <linux/compat.h>
tnc_misc.c
* Replace __UBOOT__ with __BAREBOX__
ubifs-media.h
* Replace __UBOOT__ with __BAREBOX__
ubifs.c:
* Replaced __UBOOT__ with __BAREBOX__
* Adjusted header includes
* Removed DECLARE_GLOBAL_DATA_PTR
* Add static struct z_stream_s variable
* Add struct ubifs_priv delcaration
* Replaced zunzip with deflate_decompress call
* Add ifdef for disabling ZLIB and/or LZO support
* Replaced malloc_cache_aligned with kzalloc
* Added #ifndef __BAREBOX__ around filldir, ubifs_printdir,
ubifs_set_blk_dev, ubifs_ls, ubifs_exists, ubifs_size, do_readpage,
ubifs_read, ubifs_close, ubifs_load
* Make parameter filename const char* in ubifs_findfile
* Add UBIFS fs_driver_d implementation
* Add zlib_decomp_init, ubifs_init
ubifs.h:
* Replaced __UBOOT__ with __BAREBOX__
* Adjusted header includes
* Added old #define crc32
* Added helper around kmem*
* Added XATTR_LIST_MAX define
* Added #ifndef __BAREBOX__ around current_fs_time struct inode,
struct super_block, file_system_type, dentry and friends which barebox
already has
* Added #ifndef __BAREBOX__ around write_inode in super_operations to avoid
declaration of writeback_control
* Change rp_uid and rp_gid to uid_t and gui_t
* Added struct device_d to struct ubifs_info
* Added forward declaration of ubifs_get_super
linux/fs.h:
* Make struct inode's i_nlink a union containing a non-const int __i_nlink
while making i_nlink a const int
linux/fs.h:
* Add s_remove_count
linux/fs.h:
* Convert struct super_block.s_instances and
struct file_system_type.fs_supers to hlist_head
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
volume will only be initialized when efi_loaded_image is
set.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver was imported from Linux 4.4.
Current implementation supports only XZ decompressor.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch fixes this compiler's warning:
CC fs/ext4/ext4_common.o
fs/ext4/ext4_common.c:130:5: warning: no previous prototype for
'ext4fs_get_indir_block' [-Wmissing-prototypes]
int ext4fs_get_indir_block(struct ext2fs_node *node, struct
ext4fs_indir_block *indir, int blkno)
^
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ramoops may be useful even without oftree support, as kernels
booted without a DT may have other means to reserve the
ramoops memory.
Fixes:
In function `ramoops_probe':
undefined reference to `of_add_reserve_entry'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a device >4GiB is erased, not only the offset can be bigger
than 4GiB, but also the size. This happens with the simplest command
to erase a device: erase /dev/nand0. Make the size argument a 64bit
type to make this work.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using NFS in conjunction with boot spec and the feature to let Barebox
auto generate a kernel command line must keep the options the NFS filesystem
was mounted in Barebox. This patch extends the kernel command line parameter
on demand if something different than the defaults are used.
The command:
barebox:/ boot nfs://myhost//root
expands to the kernel command line:
nfsroot=myhost:/root,v3,tcp
while the command:
barebox:/ boot nfs://myhost:2049//root
expands now to the kernel command line:
nfsroot=myhost:/root,v3,tcp,mountport=2049,port=2049
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a whole block of 4KiB in an ubifs file is zero then the block is
not stored in the filesystem. read_block() returns -ENOENT in this case,
so this return value must be treated as success.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move mutex related defines to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move spinlock related definitions to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move cond_resched() from barebox-wrapper.h to its original
place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove macros, that were already defined in linux/stat.h.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move Linux file system structs from UBIFS to central place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds file transfer support over RATP. The host can export a
directory using the bbremote tool which can then be mounted under
barebox as a filesystem.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
This adds the ability to control barebox over serial lines. The regular
console is designed for human input and is unsuitable for controlling
barebox from scripts since characters can be lost on both ends, the data
stream contains escape sequences and the prompt cannot be easily matched
upon.
This approach is based on the RATP protocol. RATP packages start with a
binary 0x01 which does not occur in normal console data. Whenever a
0x01 character is detected in the console barebox goes into RATP mode.
The RATP packets contain a simple structure with a command/respone
type and data for that type. Currently defined types are:
BB_RATP_TYPE_COMMAND (host->barebox):
Execute a command in the shell
BB_RATP_TYPE_COMMAND_RETURN (barebox->host)
Sends return value of the command back to the host, also means
barebox is ready for the next command
BB_RATP_TYPE_CONSOLEMSG (barebox->host)
Console message from barebox
Planned but not yet implemented are:
BB_RATP_TYPE_PING (host->barebox)
BB_RATP_TYPE_PONG (barebox->host)
For testing purposes
BB_RATP_TYPE_GETENV (host->barebox)
BB_RATP_TYPE_GETENV_RETURN (barebox->host)
Get values of environment variables
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Do not remove the automountpoints when they are mounted. This way
they can be reused when they have been unmounted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a new cdev doesn't have a device_node defined when passed to
devfs_create(), set it to the device_node of the parent device, if one
exists.
For non-partitions, like ocotp or eeprom devices, this is the correct
thing to do. Partitions need to use, and do use, a different node.
The code from commit 274e0b8dc4 to set
device_node in ocotp can be removed.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pstore is a persistent storage filesystem used for RAMOOPS. It is used
to store console logs, panics, ftrace and other information in case of a
crash/panic/oops/reboot.
pstore is implemented for barebox as a read-only filesystem at the
moment. It may be extended later on. The idea is to provide a way to
extract essential data from the last running kernel.
Most of the code is copied from the kernel. However this is only a
lightweight implementation without real write support yet.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Returning -ENOSYS as a result of truncate() breaks ability to write to
semihosting host's filesystem, so change the return value to 0. This
shouldn't cause any problems since all of the funcionlaity of
truncate() should is already handled by 'open' (via O_TRUNC) and
'write' (will automatically grow the file size when writing)
automatically
Unfortunately this was missed in original commit that introduced
semihosting
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>