The mtd read file operation has a unnecessary conversion to unsigned
long in the read offset. Remove it to make it work with chips >4GiB
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the userspace structs 64bit where necessary. Since we do not have
separated kernel/userspace in barebox we can just modifiy the original
structs instead of adding separate 64bit structs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some mtd drivers like the spi-nor driver do not assign a value
to the retlen pointer but instead only add the bytes written
to *retlen. Users of mtd_write expect the variable to be initialized
by the mtd core though, so we have to do it in mtd_write(). The
same is done in mtd_read already.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Partition names should be partition@<offset> with <offset> being the
offset in the master mtd, and not a counting number.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make setting partitions a litte bit more robust.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Hook UBI attachment into the mtd class devices detect function. This
makes it possible to attach ubi devices with 'detect nand0.root'.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have to start searching for the mtd node starting in the given root node not
the defaukt (= barebox internal) one. This means the internal DT is always
fixed up. This leads to booting not fixed up DT when using external DTs.
This patch fixes the problem.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get the number of address cells and size cells we have to use
the newly created partition node, not the parent device node. The
parent device node returns the address/size cells of the controller
node, not the partition node.
On an am335x machine this fixes the device tree passed to Linux.
The situation there is:
...
gpmc@50000000 {
...
#address-cells = <0x2>;
#size-cells = <0x1>;
ranges = <0x0 0x0 0x8000000 0x10000000>;
...
nand@0,0 {
reg = <0x0 0x0 0x0>;
#address-cells = <0x1>;
#size-cells = <0x1>;
...
partition@7 {
label = "system";
reg = <0x220000 0x7de0000>;
};
};
};
and without this patch barebox passes three bytes for
partition@7's reg property instead of only two which naturally
confuses Linux and yields to the system partition to start at 0
with a size of 0x220000.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The partitions parameter allows to partition a mtd device
using a standard cmdline partition description string. This
way the partitions of a mtd device can be changed at once.
The output of the string can be used to be passed to the kernel
as cmdline partition string. The partitions can also still be
changed with addpart/delpart, the partitions parameter will
be updated accordingly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd partitions should not conflict with each other, so forbid this.
Also add the partitions to the partitions list sorted, so that they
can be easier translated into a cmdline partition string.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the bb devices which are created in add_mtd_device() must be removed
in del_mtd_device(). Also remove deletion of the bb devices in the
mtdparts-add environment file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Partitions are mtd devices themselves, but the 'erasebad'
parameter is only set to the master mtd device. To allow to
erase bad blocks on partitions test the master device instead
of the partition devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a mtd device can have bad blocks we want to create a
bb device, so do this automatically. This allows us to
drop bb device creation from the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MTD internal API presently uses 32-bit values to represent device
size. This patch updates them to 64-bits but leaves the external API
unchanged.
In general, changing from 32-bit to 64-bit values cause little
or no changes to the majority of the code with the following
exceptions:
- printk message formats;
- division and modulus of 64-bit values (mtd_div_by_wb,
mtd_div_by_eb may be used in some of such cases).
Was tested on phyFLEX i.MX6.
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Grigory Milev <g.milev@sam-solutions.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So far mtd partitions were mtd devices, but these were not registered.
This patch changes this. mtd partitions are now registered like real
mtd devices. This makes them part of the device hierarchy.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->parent is optional so we can't derefence mtd->parent->device_node
without checking mtd->parent.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
erase_info may be modified by the mtd partition code, so
set the address each time we call mtd_erase.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ubiformat needs the subpagesize to work correctly. The kernel uses
sysfs to pass the subpagesize, but in barebox we have the possibility
to extend struct mtd_info_user. Add a corresponding field and use it
in ubiformat.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->read returns the number of bitflips as positive numbers.
Instead of returning these numbers Return -EUCLEAN when the bitflip
threshold has been reached, 0 otherwise.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->read returns the number of bitflips as positive numbers.
Instead of returning these numbers Return -EUCLEAN when the bitflip
threshold has been reached, 0 otherwise.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Right now we do not support persistent names for mtd devices. The
base name can be passed to add_mtd_device, but this is always appended
with a dynamic number. With this patch add_mtd_device takes a device_id
argument which can be used to create a mtd device with an exact name.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our erase command used to align to eraseblocks when necessary.
This worked well until recently when the m25p80, mtd_dataflash
and cfi flash were added / converted to mtd. This patch aligns
the input to the erase fileoperation to eraseblock boundaries.
Also tested with non uniform flashes with multiple eraseregions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a device does not have bad blocks loop over the eraseblocks
in the driver instead of the core. This allows the mtd_dataflash
driver to erase blocks instead of pages to gain more speed during
erasing. Also the mtd_dataflash driver modifies the erase_info
struct which causes the outer loop in the core to never end.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While erasing bad blocks is a potentially dangerous operation
it is sometimes needed during development or when some foreign
code has touched the flash.
This patch adds a device parameter 'erasebad' to allow erasing
bad blocks. Since this is not wanted during production this is
behind a Kconfig option.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not write pages which only contain 0xff. UBI expects pages which
seem empty to be writable. This got lost with:
| commit 3139c3e9a6
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Thu Nov 29 11:16:40 2012 +0100
|
| mtd core: call driver write function with complete buffer
|
| mtd->write is supposed to loop around pages internally, no need
| to do this in mtd_write. This fixes a huge write performance drop
| with the m25p80 driver when it was converted to a mtd driver recently.
| Since mtd->writesize is 1 for this driver mtd_write ended up doing
| single byte writes on the flash.
Introduce mtd_all_ff as a global function since UBI currently has its own
implementation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of dereferencing struct mtd_info members directly use
the wrapper functions which have an additional check if the
callback exists if it is optional, like mark_bad or is_bad.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel has mtd_read, mtd_write, mtd_erase and mtd_block_markbad.
Add these functions to barebox aswell to make future mtd synchronizations
with the kernel easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These are currently named mtd_read/write/erase. Functions with
the same name exist as global functions in the kernel. Rename
them to mtd_op_* to avoid name clashes with future mtd updates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Got this compile warning if MTD_WRITE support isn't set.
drivers/mtd/core.c: In function 'mtd_ioctl':
drivers/mtd/core.c:117:26: warning: unused variable 'ei' [-Wunused-variable]
Add a #ifdef to declaration of variable 'ei' to solve it.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make that, we need to shift mtd_erase before mtd_ioctl.
ubi-utils need that, especially ubiformat.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:
| commit c2e568d19c
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date: Sat Nov 3 16:11:05 2012 +0100
|
| bus: add bus device
|
| automatically add it as parent of any bus device if none already specified
|
| we have now a nice output per bus
If for example a FATfs is mounted this nice output per bus often ends with:
> `---- fat0
> `---- 0
> `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
> `---- sram00
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>] lr : [<87f08a04>]
> sp : 86eff8c0 ip : 87f3fbde fp : ffffffff
> r10: ffffffff r9 : 00000000 r8 : 00000003
> r7 : 86f075b8 r6 : 00000002 r5 : ffffffec r4 : 86f07544
> r3 : 00000000 r2 : 43f900b4 r1 : 00000020 r0 : 00000005
> Flags: Nzcv IRQs off FIQs off Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)
This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>
mtd->write is supposed to loop around pages internally, no need
to do this in mtd_write. This fixes a huge write performance drop
with the m25p80 driver when it was converted to a mtd driver recently.
Since mtd->writesize is 1 for this driver mtd_write ended up doing
single byte writes on the flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Teresa Remmet
Marc Kleine-Budde
Herve Codina
Dmitry Lavnikevich
Alexander Aring
Wolfram Sang