To avoid getting a different divider due to rounding errors when using
set_hclk later, use DIV_ROUND_UP for the returned value.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bareboxenv-target binary is automatically created but never
deleted nor is it excluded from git tracking. This patch remedies
the situation by adding scripts/bareboxenv-target to .gitignnore
and adjusting the list of to be deleted files of the 'clean' target
in the core Makefile.
Signed-off-by: Roberto Nibali <rnibali@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a command to sleep for n milliseconds.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function name to command_var_complete in all calls and its declaration.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change is necessary because valid source argument for the clko command
can be negative.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not need to invalidate the cache in the poll loop anymore
since the corresponding bit is now in a dma coherent area. Instead,
flush cache before hardware operation and invalidate afterwards. Put
the corresponding code inline since it's shorter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There's no point in syncing them manually. Instead, use
dma_alloc_coherent and skip the manual flushing/invalidating.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is another variant of:
USB gadget fsl: request cacheline aligned buffer
The fsl udc driver allocates a buffer for small requests. The
driver then calls dma_inv_range later on it. This buffer happens
to be not cacheline aligned which means that a dma_inv_range can
corrupt other memory around the buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[mkl: use dma_alloc]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl udc driver allocates a buffer for small requests. The
driver then calls dma_inv_range later on it. This buffer happens
to be not cacheline aligned which means that a dma_inv_range can
corrupt other memory around the buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[mkl: use dma_alloc]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dma_alloc() allocates memory aligned to cache lines. We have to use
cache line aligned buffers if a driver calls dma_inv_range on the
buffer.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add dma_alloc to existing dma-mapping.h. On nios the mem is
aligned to D_ACHE_LINE_SIZE.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for ConnectCore® i.MX51 board from Digi International.
A separate option includes support for debugging board for this module.
Some code taken from the bootloader U-Boot and patch from Digi.
Functional of Ethernet not tested yet.
barebox 2012.05.0-00316-g4024d9c-dirty #0 Wed Jun 6 13:08:25 MSK 2012
Board: ConnectCore i.MX51
Module Variant: i.MX515@600MHz, PHY, Acceleromter (0x0b)
Module HW Rev : 02
Module Serial : B111156789
mc13xxx-spi@mc13xxx-spi0: Found MC13892 ID: 0x0045d0 [Rev: 2.0a]
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: Bad block at 0x00ce0000
nand_read_bbt: Bad block at 0x05bc0000
nand_read_bbt: Bad block at 0x0bc40000
ehci@ehci0: USB EHCI 1.00
detected i.MX51 rev 3.0
imx-esdhc@mci0: registered as mci0
imx-esdhc@mci1: registered as mci1
Malloc space: 0x95f00000 -> 0x97efffff (size 32 MB)
Stack space : 0x95ef8000 -> 0x95f00000 (size 32 kB)
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
Hit any key to stop autoboot: 3
barebox@ConnectCore i.MX51:/
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch allows to present "/dev/zero" always in system and not
depending of mem-command. Standard files allow to test other memory
devices, not only "mem", such as NOR, NAND, MCI-devices e.t.c.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We store the 'up' status of a network device in /tmp/network/$interface.
Create this file for dhcp aswell to prevent doing dhcp requests each
time ifup is called.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This variable is set in /env/init/general and then used
in /env/boot/* which is a bit confusing. Also it does not
necessarily have to be a tftp path (could be nfs aswell).
Use a local variable in the scripts using it instead to make
the meaning a bit more clear.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is always the tftp server specified in /env/network/eth0,
this could be either the one returned from a dhcp request or
a manually specified one, but in the end it's always the right
one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if serverip is specified, also overwrite eth0.serverip in dhcp
case. This makes it possible to specify a different serverip
when the dhcp server returns the wrong ip (because the DHCP
might be a DSL router which does not provide tftp).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a simple wd command which can setup, trigger and stop a watchdog
on the platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The 40 KHz frequency value was used to parry
__lshrdi3() error on little-endian MIPS because
the __lshrdi3() function is used in clocksource code.
The true value of the JZ4755's external clock frequency is 24 MHz.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
include/linux/time.h contains several unused functions derived from U-Boot
code. Since this is a file under include/linux/ it should contain only code
from the kernel, so remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>