9
0
Fork 0
barebox/include/linux/pci.h

298 lines
9.3 KiB
C

/*
* pci.h
*
* PCI defines and function prototypes
* Copyright 1994, Drew Eckhardt
* Copyright 1997--1999 Martin Mares <mj@ucw.cz>
*
* For more information, please consult the following manuals (look at
* http://www.pcisig.com/ for how to get them):
*
* PCI BIOS Specification
* PCI Local Bus Specification
* PCI to PCI Bridge Specification
* PCI System Design Guide
*/
#ifndef LINUX_PCI_H
#define LINUX_PCI_H
#include <linux/mod_devicetable.h>
#include <linux/pci_regs.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/compiler.h>
#include <driver.h>
#include <errno.h>
#include <io.h>
#include <linux/pci_ids.h>
/*
* The PCI interface treats multi-function devices as independent
* devices. The slot/function address of each device is encoded
* in a single byte as follows:
*
* 7:3 = slot
* 2:0 = function
*/
#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f)
#define PCI_FUNC(devfn) ((devfn) & 0x07)
/*
* For PCI devices, the region numbers are assigned this way:
*/
enum {
/* #0-5: standard PCI resources */
PCI_STD_RESOURCES,
PCI_STD_RESOURCE_END = 5,
/* #6: expansion ROM resource */
PCI_ROM_RESOURCE,
/* device specific resources */
#ifdef CONFIG_PCI_IOV
PCI_IOV_RESOURCES,
PCI_IOV_RESOURCE_END = PCI_IOV_RESOURCES + PCI_SRIOV_NUM_BARS - 1,
#endif
/* resources assigned to buses behind the bridge */
#define PCI_BRIDGE_RESOURCE_NUM 4
PCI_BRIDGE_RESOURCES,
PCI_BRIDGE_RESOURCE_END = PCI_BRIDGE_RESOURCES +
PCI_BRIDGE_RESOURCE_NUM - 1,
/* total resources associated with a PCI device */
PCI_NUM_RESOURCES,
/* preserve this for compatibility */
DEVICE_COUNT_RESOURCE = PCI_NUM_RESOURCES,
};
/*
* Error values that may be returned by PCI functions.
*/
#define PCIBIOS_SUCCESSFUL 0x00
#define PCIBIOS_FUNC_NOT_SUPPORTED 0x81
#define PCIBIOS_BAD_VENDOR_ID 0x83
#define PCIBIOS_DEVICE_NOT_FOUND 0x86
#define PCIBIOS_BAD_REGISTER_NUMBER 0x87
#define PCIBIOS_SET_FAILED 0x88
#define PCIBIOS_BUFFER_TOO_SMALL 0x89
/*
* The pci_dev structure is used to describe PCI devices.
*/
struct pci_dev {
struct list_head bus_list; /* node in per-bus list */
struct pci_bus *bus; /* bus this device is on */
struct pci_bus *subordinate; /* bus this device bridges to */
void *sysdata; /* hook for sys-specific extension */
struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
struct pci_slot *slot; /* Physical slot this device is in */
struct device_d dev;
unsigned int devfn; /* encoded device & function index */
unsigned short vendor;
unsigned short device;
unsigned short subsystem_vendor;
unsigned short subsystem_device;
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
u8 revision; /* PCI revision, low byte of class word */
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
/* Base registers for this device, can be adjusted by
* pcibios_fixup() as necessary.
*/
unsigned long base_address[6];
unsigned long rom_address;
};
#define to_pci_dev(dev) container_of(dev, struct pci_dev, dev)
struct pci_bus {
struct list_head node; /* node in list of buses */
struct list_head children; /* list of child buses */
struct list_head devices; /* list of devices on this bus */
struct list_head slots; /* list of slots on this bus */
struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
struct list_head resources; /* address space routed to this bus */
struct pci_ops *ops; /* configuration access functions */
void *sysdata; /* hook for sys-specific extension */
struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */
unsigned char number; /* bus number */
unsigned char primary; /* number of primary bridge */
unsigned char secondary; /* number of secondary bridge */
unsigned char subordinate; /* max number of subordinate buses */
char name[48];
};
/* Low-level architecture-dependent routines */
struct pci_ops {
int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
/* return memory address for pci resource */
int (*res_start)(struct pci_bus *bus, resource_size_t res_addr);
};
extern struct pci_ops *pci_ops;
/*
* Each pci channel is a top-level PCI bus seem by CPU. A machine with
* multiple PCI channels may have multiple PCI host controllers or a
* single controller supporting multiple channels.
*/
struct pci_controller {
struct pci_controller *next;
struct pci_bus *bus;
struct pci_ops *pci_ops;
struct resource *mem_resource;
unsigned long mem_offset;
struct resource *io_resource;
unsigned long io_offset;
unsigned long io_map_base;
unsigned int index;
/* Optional access methods for reading/writing the bus number
of the PCI controller */
int (*get_busno)(void);
void (*set_busno)(int busno);
};
struct pci_driver {
struct list_head node;
const char *name;
const struct pci_device_id *id_table; /* must be non-NULL for probe to be called */
int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
void (*remove) (struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
struct driver_d driver;
};
#define to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
/* these helpers provide future and backwards compatibility
* for accessing popular PCI BAR info */
#define pci_resource_start(dev, bar) ((dev)->resource[(bar)].start)
/**
* DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
* @_table: device table name
*
* This macro is used to create a struct pci_device_id array (a device table)
* in a generic manner.
*/
#define DEFINE_PCI_DEVICE_TABLE(_table) \
const struct pci_device_id _table[]
/**
* PCI_DEVICE - macro used to describe a specific pci device
* @vend: the 16 bit PCI Vendor ID
* @dev: the 16 bit PCI Device ID
*
* This macro is used to create a struct pci_device_id that matches a
* specific device. The subvendor and subdevice fields will be set to
* PCI_ANY_ID.
*/
#define PCI_DEVICE(vend, dev) \
.vendor = (vend), .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
/**
* PCI_DEVICE_CLASS - macro used to describe a specific pci device class
* @dev_class: the class, subclass, prog-if triple for this device
* @dev_class_mask: the class mask for this device
*
* This macro is used to create a struct pci_device_id that matches a
* specific PCI class. The vendor, device, subvendor, and subdevice
* fields will be set to PCI_ANY_ID.
*/
#define PCI_DEVICE_CLASS(dev_class, dev_class_mask) \
.class = (dev_class), .class_mask = (dev_class_mask), \
.vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
/**
* PCI_VDEVICE - macro used to describe a specific pci device in short form
* @vend: the vendor name
* @dev: the 16 bit PCI Device ID
*
* This macro is used to create a struct pci_device_id that matches a
* specific PCI device. The subvendor, and subdevice fields will be set
* to PCI_ANY_ID. The macro allows the next field to follow as the device
* private data.
*/
#define PCI_VDEVICE(vend, dev) \
.vendor = PCI_VENDOR_ID_##vend, .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, 0, 0
int pci_register_driver(struct pci_driver *pdrv);
int pci_register_device(struct pci_dev *pdev);
extern struct list_head pci_root_buses; /* list of all known PCI buses */
extern unsigned int pci_scan_bus(struct pci_bus *bus);
extern void register_pci_controller(struct pci_controller *hose);
int pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn,
int where, u8 *val);
int pci_bus_read_config_word(struct pci_bus *bus, unsigned int devfn,
int where, u16 *val);
int pci_bus_read_config_dword(struct pci_bus *bus, unsigned int devfn,
int where, u32 *val);
int pci_bus_write_config_byte(struct pci_bus *bus, unsigned int devfn,
int where, u8 val);
int pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn,
int where, u16 val);
int pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn,
int where, u32 val);
static inline int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
{
return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
}
static inline int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
{
return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
}
static inline int pci_read_config_dword(const struct pci_dev *dev, int where,
u32 *val)
{
return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
}
static inline int pci_write_config_byte(const struct pci_dev *dev, int where, u8 val)
{
return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
}
static inline int pci_write_config_word(const struct pci_dev *dev, int where, u16 val)
{
return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
}
static inline int pci_write_config_dword(const struct pci_dev *dev, int where,
u32 val)
{
return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
}
void pci_set_master(struct pci_dev *dev);
void pci_clear_master(struct pci_dev *dev);
int pci_enable_device(struct pci_dev *dev);
extern void __iomem *pci_iomap(struct pci_dev *dev, int bar);
#endif /* LINUX_PCI_H */