111 lines
4.5 KiB
C
111 lines
4.5 KiB
C
/*
|
|
* pci_regs.h
|
|
*
|
|
* PCI standard defines
|
|
* Copyright 1994, Drew Eckhardt
|
|
* Copyright 1997--1999 Martin Mares <mj@ucw.cz>
|
|
*
|
|
* For more information, please consult the following manuals (look at
|
|
* http://www.pcisig.com/ for how to get them):
|
|
*
|
|
* PCI BIOS Specification
|
|
* PCI Local Bus Specification
|
|
* PCI to PCI Bridge Specification
|
|
* PCI System Design Guide
|
|
*
|
|
* For HyperTransport information, please consult the following manuals
|
|
* from http://www.hypertransport.org
|
|
*
|
|
* The HyperTransport I/O Link Specification
|
|
*/
|
|
|
|
#ifndef LINUX_PCI_REGS_H
|
|
#define LINUX_PCI_REGS_H
|
|
|
|
/*
|
|
* Under PCI, each device has 256 bytes of configuration address space,
|
|
* of which the first 64 bytes are standardized as follows:
|
|
*/
|
|
#define PCI_VENDOR_ID 0x00 /* 16 bits */
|
|
#define PCI_DEVICE_ID 0x02 /* 16 bits */
|
|
#define PCI_COMMAND 0x04 /* 16 bits */
|
|
#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
|
|
#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
|
|
#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
|
|
#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
|
|
#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
|
|
#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
|
|
#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
|
|
#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
|
|
#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
|
|
#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
|
|
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
|
|
|
|
#define PCI_STATUS 0x06 /* 16 bits */
|
|
#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
|
|
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
|
|
#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
|
|
#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
|
|
#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
|
|
#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
|
|
#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
|
|
#define PCI_STATUS_DEVSEL_FAST 0x000
|
|
#define PCI_STATUS_DEVSEL_MEDIUM 0x200
|
|
#define PCI_STATUS_DEVSEL_SLOW 0x400
|
|
#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
|
|
#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
|
|
#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
|
|
#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
|
|
#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
|
|
|
|
#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
|
|
#define PCI_REVISION_ID 0x08 /* Revision ID */
|
|
#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
|
|
#define PCI_CLASS_DEVICE 0x0a /* Device class */
|
|
|
|
#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
|
|
#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
|
|
#define PCI_HEADER_TYPE 0x0e /* 8 bits */
|
|
#define PCI_HEADER_TYPE_NORMAL 0
|
|
#define PCI_HEADER_TYPE_BRIDGE 1
|
|
#define PCI_HEADER_TYPE_CARDBUS 2
|
|
|
|
#define PCI_BIST 0x0f /* 8 bits */
|
|
#define PCI_BIST_CODE_MASK 0x0f /* Return result */
|
|
#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
|
|
#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
|
|
|
|
/*
|
|
* Base addresses specify locations in memory or I/O space.
|
|
* Decoded size can be determined by writing a value of
|
|
* 0xffffffff to the register, and reading it back. Only
|
|
* 1 bits are decoded.
|
|
*/
|
|
#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
|
|
#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
|
|
#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
|
|
#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
|
|
#define PCI_BASE_ADDRESS_SPACE_IO 0x01
|
|
#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
|
|
#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
|
|
#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
|
|
#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
|
|
#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
|
|
/* bit 1 is reserved if address_space = 1 */
|
|
|
|
/* Header type 0 (normal devices) */
|
|
#define PCI_CARDBUS_CIS 0x28
|
|
#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
|
|
#define PCI_SUBSYSTEM_ID 0x2e
|
|
#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
|
|
#define PCI_ROM_ADDRESS_ENABLE 0x01
|
|
#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
|
|
|
|
#endif /* LINUX_PCI_REGS_H */
|