sysmo-bts
/
barebox
9
0
Fork 0
Code Releases Activity
barebox/arch/arm/configs
History
Jean-Christophe PLAGNIOL-VILLARD 2263e27814 net: introduce phylib 
Adapt phylib from linux

switch all the driver to it
reimplement mii bus

This will allow to have
 - phy drivers
 - to only connect the phy at then opening of the device
 - if the phy is not ready or not up fail on open

Same behaviour as in linux and will allow to share code and simplify porting.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 		2012-09-25 08:18:58 +02:00
..
a9m2410_defconfig Make S3C24xx config options available for all S3Cs 2012-05-21 21:58:26 +02:00
a9m2440_defconfig Make S3C24xx config options available for all S3Cs 2012-05-21 21:58:26 +02:00
at91rm9200ek_defconfig at91rm9200ek: update defconfig 2012-04-02 10:31:23 +02:00
at91sam9g10ek_defconfig Atmel sam9x boards: enable the pbl 2012-09-06 09:25:17 +02:00
at91sam9g20ek_defconfig Atmel sam9x boards: enable the pbl 2012-09-06 09:25:17 +02:00
at91sam9m10g45ek_defconfig Atmel sam9x boards: enable the pbl 2012-09-06 09:25:17 +02:00
at91sam9x5ek_defconfig Atmel sam9x boards: enable the pbl 2012-09-06 09:25:17 +02:00
at91sam9260ek_defconfig Atmel sam9x boards: enable the pbl 2012-09-06 09:25:17 +02:00
at91sam9261ek_defconfig Atmel sam9x boards: enable the pbl 2012-09-06 09:25:17 +02:00
at91sam9263ek_defconfig Atmel sam9x boards: enable the pbl 2012-09-06 09:25:17 +02:00
ccmx51_defconfig ARM: initial ConnectCore® i.MX51 board support 2012-06-30 12:46:12 +02:00
cfa10036_defconfig Add support for the Crystalfontz CFA-10036 board 2012-07-04 22:15:27 +02:00
chumbyone_defconfig ARM chumby defconfig: update with new features 2011-01-20 10:44:14 +01:00
cupid_defconfig defenv: remove bogus defaultenv from defconfigs 2012-03-20 14:15:36 +01:00
dss11_defconfig dss11: add defconfig 2011-12-07 09:39:57 +01:00
edb93xx_defconfig configs: use new savedefconfig format as in linux 2010-09-17 10:46:59 +08:00
eukrea_cpuimx25_defconfig ARM defconfigs: Use TLSF malloc on defconfigs getting too big 2012-06-29 10:06:31 +02:00
eukrea_cpuimx27_defconfig update configs and default envs for uncompress 2011-11-29 21:12:42 +01:00
eukrea_cpuimx35_defconfig ARM defconfigs: Use TLSF malloc on defconfigs getting too big 2012-06-29 10:06:31 +02:00
eukrea_cpuimx51_defconfig ARM defconfigs: Use TLSF malloc on defconfigs getting too big 2012-06-29 10:06:31 +02:00
freescale-mx6-arm2_defconfig ARM Freescale i.MX6 Armadillo2: Add defconfig 2012-04-24 10:31:51 +02:00
freescale-mx6-sabrelite_defconfig ARM i.MX: Add defconfig for Freescale i.MX6 Sabre Lite board 2012-07-31 20:00:04 +02:00
freescale_mx25_3stack_defconfig defconfig update 2012-01-02 15:02:45 +01:00
freescale_mx35_3stack_defconfig defconfig update 2012-01-02 15:02:45 +01:00
freescale_mx51_babbage_defconfig ARM Freescale i.MX51 babbage: switch to new default env 2012-05-21 09:11:40 +02:00
freescale_mx53_loco_defconfig mx53/loco: udpate defconfig with USB host 2012-04-15 18:29:53 +02:00
freescale_mx53_smd_defconfig defenv: remove bogus defaultenv from defconfigs 2012-03-20 14:15:36 +01:00
friendlyarm_mini2440_defconfig ARM/Samsung: add the vendor FriendlyARM to the board's directory name 2012-07-20 14:04:57 +02:00
friendlyarm_mini6410_defconfig ARM/Samsung: add the Mini6410 platform as a user of the S3C6410 SoC 2012-07-30 11:35:27 +02:00
friendlyarm_tiny210_defconfig Add FriendlyArm Tiny210 board (S5PV210) 2012-07-20 14:03:19 +02:00
friendlyarm_tiny6410_defconfig ARM/Samsung: add the Tiny6410 platform as a user of the S3C6410 SoC 2012-07-30 11:35:27 +02:00
imx23evk_defconfig ARM: rename STM arch to mxs 2011-01-20 10:43:24 +01:00
imx28evk_defconfig mx28-evk: Enable LCD support and bmp command 2012-04-02 10:12:09 +02:00
mioa701_defconfig arm/mach-pxa: add mioa701 board 2012-02-29 08:28:20 +01:00
mmccpu_defconfig configs: use new savedefconfig format as in linux 2010-09-17 10:46:59 +08:00
mx21ads_defconfig Increase heapsize for i.MX21ADS board again. 2012-04-30 13:43:18 +02:00
mx27ads_defconfig Final switch to use combined driver mc13xxx 2012-04-11 09:51:01 +02:00
neso_defconfig Final switch to use combined driver mc13xxx 2012-04-11 09:51:01 +02:00
netx_nxdb500_defconfig configs: use new savedefconfig format as in linux 2010-09-17 10:46:59 +08:00
nhk8815_defconfig defenv: remove bogus defaultenv from defconfigs 2012-03-20 14:15:36 +01:00
omap3_evm_defconfig configs: use new savedefconfig format as in linux 2010-09-17 10:46:59 +08:00
omap3430_sdp3430_per_uart_defconfig configs: use new savedefconfig format as in linux 2010-09-17 10:46:59 +08:00
omap3530_beagle_defconfig Add CONFIG_MCI_STARTUP=y to BeagleBoard defconfig. 2012-02-07 23:30:53 +01:00
omap3530_beagle_per_uart_defconfig configs: use new savedefconfig format as in linux 2010-09-17 10:46:59 +08:00
omap3530_beagle_xload_defconfig ARM omap3 beagle xload: Move stack to SRAM 2012-01-17 18:50:25 +01:00
panda_defconfig panda: update defconfig for i2c and led support 2012-05-21 21:40:33 +02:00
panda_xload_defconfig PANDA: remove CONFIG_FS_RAMFS and CONFIG_FS_DEVFS 2011-06-20 09:08:05 +02:00
pca100_defconfig Completely migrate option ISP1504 to ULPI 2012-04-02 09:32:54 +02:00
pcm027_defconfig pcm027: add board support 2012-04-10 10:39:57 +02:00
pcm037_defconfig defconfig update 2012-01-02 15:02:45 +01:00
pcm038_defconfig ARM pcm038: Switch to new environment 2012-05-18 12:26:52 +02:00
pcm043_defconfig ARM pcm043: Add overlay support 2012-01-23 09:38:27 +01:00
pcm049_defconfig defconfig update 2012-01-02 15:02:45 +01:00
pcm049_xload_defconfig pcm049_xload_defconfig: activate Thumb-2 support 2012-03-15 20:55:07 +01:00
phycard_a_l1_defconfig net: introduce phylib 2012-09-25 08:18:58 +02:00
phycard_a_l1_xload_defconfig phyCARD-A-L1: Create xload configuration. 2012-07-20 09:21:27 +02:00
phycard_a_xl2_defconfig omap: add support for phycard-a-xl2 2012-03-13 13:35:25 +01:00
phycard_a_xl2_xload_defconfig omap: add support for phycard-a-xl2 2012-03-13 13:35:25 +01:00
pm9g45_defconfig pm9g45: enable USB OHCI host and USB mass storage 2012-03-23 15:12:46 +01:00
pm9261_defconfig Remove the obsolet driver for the DM9000E ethernet device 2011-12-14 14:09:04 +01:00
pm9263_defconfig configs: use new savedefconfig format as in linux 2010-09-17 10:46:59 +08:00
qil_a9260_128mib_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
qil_a9260_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
scb9328_defconfig defconfig update 2012-01-02 15:02:45 +01:00
tny_a9g20_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
tny_a9260_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
tny_a9263_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
toshiba_ac100_defconfig toshiba_ac100: add defconfig 2012-05-29 15:46:54 +02:00
tqma53_defconfig ARM tqma53: switch to new environment 2012-07-04 08:39:49 +02:00
tx25stk5_defconfig defconfig update 2012-01-02 15:02:45 +01:00
tx28stk5_defconfig defconfig update 2012-01-02 15:02:45 +01:00
tx51stk5_defconfig net: introduce phylib 2012-09-25 08:18:58 +02:00
usb_a9g20_128mib_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
usb_a9g20_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
usb_a9260_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
usb_a9263_128mib_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
usb_a9263_defconfig Calao boards: enable the pbl 2012-09-06 09:25:17 +02:00
versatilepb_defconfig update configs and default envs for uncompress 2011-11-29 21:12:42 +01:00