Here is a test output: barebox 2012.07.0-00136-ge3ab4bc-dirty #23 Tue Jul 3 23:10:44 MSK 2012 Board: Phytec phyCORE-i.MX27 mc13xxx-spi@mc13xxx-spi0: Found MC13783 ID: 0x00009b [Rev: 3.1] cfi_flash@cfi_flash0: found cfi flash at c0000000, size 33554432 NAND device: Manufacturer ID: 0x20, Chip ID: 0x36 (ST Micro NAND 64MiB 1,8V 8-bit) Bad block table found at page 131040, version 0x01 Bad block table found at page 131008, version 0x01 imxfb@imxfb0: i.MX Framebuffer driver cfi_protect: protect 0xc0080000 (size 1048576) Using environment in NOR Flash Found NXP ISP150x ULPI transceiver (0x04cc:0x1504). ehci@ehci0: USB EHCI 1.00 imx-mmc@mci0: registered as mci0 Malloc space: 0xa6f00000 -> 0xa7efffff (size 16 MB) Stack space : 0xa6ef8000 -> 0xa6f00000 (size 32 kB) running /env/bin/init... Hit m for menu or any other key to stop autoboot: 3 type exit to get to the menu barebox@Phytec phyCORE-i.MX27:/ mci0.probe=1 mci@mci0: registered disk0 barebox@Phytec phyCORE-i.MX27:/ devinfo mci0 resources: driver: mci Card: Attached is an SD Card (Version: 1.10) Capacity: 1962 MiB CID: 1C535653-44432020-1000013C-7E007200 CSD: 005E0032-5F5A83D5-2DB7FFBF-96800000 Max. transfer speed: 25000000 Hz Manufacturer ID: 1C OEM/Application ID: 5356 Product name: 'SDC ' Product revision: 1.0 Serial no: 81022 Manufacturing date: 2.2007 Parameters: probe = 1 barebox@Phytec phyCORE-i.MX27:/ mkdir /d barebox@Phytec phyCORE-i.MX27:/ mount /dev/disk0.0 fat /d barebox@Phytec phyCORE-i.MX27:/ ls /d barebox.bin barebox@Phytec phyCORE-i.MX27:/ Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> |
||
---|---|---|
.. | ||
arm | ||
blackfin | ||
mips | ||
nios2 | ||
openrisc | ||
ppc | ||
sandbox | ||
x86 | ||
architecture.dox |