11dcfd13b9
Based on the same commit in the Kernel: | commit 828b1716459d00b3d57d4309d25a8d1ea241116a | Author: Shawn Guo <shawn.guo@linaro.org> | Date: Thu Jul 11 13:58:36 2013 +0800 | | ARM: dts: imx: share pad macro names between imx6q and imx6dl | | The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board | design can work with either chip plugged into the socket, e.g. sabresd | and sabreauto boards. | | We currently define pin groups in imx6q.dtsi and imx6dl.dtsi | respectively because the pad macro names are different between two | chips. This brings a maintenance burden on having the same label point | to the same pin group defined in two places. | | The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs | pad macro names. Then the pin groups becomes completely common between | imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the | long term maintenance of imx6q/dt pin settings becomes easier. | | Unfortunately, the change brings some dramatic diff stat, but it's all | about DTS file, and the ultimate net diff stat is good. | | Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
179 lines
3.6 KiB
Text
179 lines
3.6 KiB
Text
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "imx6q.dtsi"
|
|
|
|
/ {
|
|
model = "Freescale i.MX6 Quad SABRE Lite Board";
|
|
compatible = "fsl,imx6q-sabrelite", "fsl,imx6q";
|
|
|
|
chosen {
|
|
linux,stdout-path = "/soc/aips-bus@02100000/serial@021e8000";
|
|
};
|
|
|
|
memory {
|
|
reg = <0x10000000 0x40000000>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
|
|
reg_2p5v: 2p5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "2P5V";
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <2500000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: 3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_usb_otg_vbus: usb_otg_vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_otg_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio3 22 0>;
|
|
enable-active-high;
|
|
};
|
|
};
|
|
|
|
sound {
|
|
compatible = "fsl,imx6q-sabrelite-sgtl5000",
|
|
"fsl,imx-audio-sgtl5000";
|
|
model = "imx6q-sabrelite-sgtl5000";
|
|
ssi-controller = <&ssi1>;
|
|
audio-codec = <&codec>;
|
|
audio-routing =
|
|
"MIC_IN", "Mic Jack",
|
|
"Mic Jack", "Mic Bias",
|
|
"Headphone Jack", "HP_OUT";
|
|
mux-int-port = <1>;
|
|
mux-ext-port = <4>;
|
|
};
|
|
};
|
|
|
|
&ecspi1 {
|
|
fsl,spi-num-chipselects = <1>;
|
|
cs-gpios = <&gpio3 19 0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1_1>;
|
|
status = "okay";
|
|
|
|
flash: m25p80@0 {
|
|
compatible = "sst,sst25vf016b", "m25p80";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&ssi1 {
|
|
fsl,mode = "i2s-slave";
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
hog {
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
|
|
MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
|
|
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
|
|
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
|
|
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
|
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
|
|
>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ocotp1 {
|
|
barebox,provide-mac-address = <&fec 0x620>;
|
|
};
|
|
|
|
&usbotg {
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbotg_1>;
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet_1>;
|
|
phy-mode = "rgmii";
|
|
phy-reset-gpios = <&gpio3 23 0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc3_2>;
|
|
cd-gpios = <&gpio7 0 0>;
|
|
wp-gpios = <&gpio7 1 0>;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc4_2>;
|
|
cd-gpios = <&gpio2 6 0>;
|
|
wp-gpios = <&gpio2 7 0>;
|
|
vmmc-supply = <®_3p3v>;
|
|
status = "okay";
|
|
};
|
|
|
|
&audmux {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_audmux_1>;
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2_1>;
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1_1>;
|
|
|
|
codec: sgtl5000@0a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clocks = <&clks 169>;
|
|
VDDA-supply = <®_2p5v>;
|
|
VDDIO-supply = <®_3p3v>;
|
|
};
|
|
};
|