README.hardware: clarify NFS requirements for edgerouter
You don't need NFS/TFTP for a plain USB setup. (From meta-yocto rev: 904facdf56028d63d938e07c459169cbe78ef8fe) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is contained in:
parent
5bb5313fa4
commit
6fd976f6b4
|
@ -352,19 +352,22 @@ Setup instructions
|
||||||
------------------
|
------------------
|
||||||
|
|
||||||
You will need the following:
|
You will need the following:
|
||||||
* NFS root setup on your workstation
|
|
||||||
* TFTP server installed on your workstation
|
|
||||||
* RJ45 -> serial ("rollover") cable connected from your PC to the CONSOLE
|
* RJ45 -> serial ("rollover") cable connected from your PC to the CONSOLE
|
||||||
port on the board
|
port on the device
|
||||||
* Ethernet connected to the first ethernet port on the board
|
* Ethernet connected to the first ethernet port on the board
|
||||||
|
|
||||||
|
If using NFS as part of the setup process, you will also need:
|
||||||
|
* NFS root setup on your workstation
|
||||||
|
* TFTP server installed on your workstation (if fetching the kernel from
|
||||||
|
TFTP, see below).
|
||||||
|
|
||||||
--- Preparation ---
|
--- Preparation ---
|
||||||
|
|
||||||
Build an image (e.g. core-image-minimal) using "edgerouter" as the MACHINE.
|
Build an image (e.g. core-image-minimal) using "edgerouter" as the MACHINE.
|
||||||
In the following instruction it is based on core-image-minimal. Another target
|
In the following instruction it is based on core-image-minimal. Another target
|
||||||
may be similiar with it.
|
may be similiar with it.
|
||||||
|
|
||||||
--- Booting from NFS root ---
|
--- Booting from NFS root / kernel via TFTP ---
|
||||||
|
|
||||||
Load the kernel, and boot the system as follows:
|
Load the kernel, and boot the system as follows:
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue