liblzma5 is really requiring by grub, setting RDEPENDS to xz would pull
unneeded xz binaries into rootfs.
(From OE-Core master rev: 78526905999fa38047ae8f3491127cc03de3e3f6)
(From OE-Core rev: 33a352f45ab05f4c81b860b1b369bde429dbff1d)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoids it's auto-detected from sysroot, which will lead implicit results.
(From OE-Core master rev: 6f9e72f77cd0b06c5ad753cb9ab05dd681690c6b)
(From OE-Core rev: 384bb308edc35fbd6538aed90512f5fcdce7575c)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid.c in acpid before 2.0.9 does not properly handle a situation in which
a process has connected to acpid.socket but is not reading any data, which
allows local users to cause a denial of service (daemon hang) via a crafted
application that performs a connect system call but no read system calls.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-1159
(From OE-Core master rev: e7b2b84dece29d16b8f05daf962b69e78dd64cb3)
(From OE-Core rev: 56f1ea2cd8eeb189ee345f215deb5867a77cd0a1)
Signed-off-by: Yue Tao <yue.tao@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub requires bison and it will fail to configure on
the host without bison installed, add the dependency
to fix it.
(From OE-Core master rev: a1510c1a8e6b8a652ae65b7e3910501f1055f87f)
(From OE-Core rev: 6f6e292a102e8ae8d607bb9dac4f3d3e2bced1ea)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub_2.0.0 requires xz to run or an error may occur.
(From OE-Core master rev: ffa2877c06c587d4ea56c55bfd0f67a88e42a772)
(From OE-Core rev: d3e1dde9ae75faa1015b80da74604c5ae360c3a6)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a SRC_URI called ${PN} is asking for trouble. When extending FILESPATH,
alsa-state can be treated as a directory and copied over the contents of ${WORKDIR}
which is invariably not what the user wants.
Avoid this by renaming the SRC_URI to something else and only call
it alsa-state at install time.
(From OE-Core rev: 04c73333e4b539de96f096ca2954b2313175edc4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iso9660 file system support needs to be added to grub in order to
be able to correctly find the grub.cfg. The grub commands to locate
the grub.cfg also needs to be encoded into grub's default
configuration.
This change allows the resulting grub binary to work both in the hard
drive / USB boot case or the optical media boot case.
[YOCTO #4100]
(From OE-Core rev: 0bc0762a479b5182a07fccb2b1e9cd5fc15ca485)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_patch re-executes, patching the configure script will fail because
it will have been regenerated during do_configure. We're patching
configure.ac so we don't need to patch configure anyway.
(From OE-Core rev: ae98a95577ba9c8a6a0d9a78d4cea33a92adff35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The U-Boot configuration has been consolidates into a single class to
avoid code duplication. This is now done by uboot-config class, so we
now use it.
(From OE-Core rev: d0bc7a53b1e61283fb155b4dcb67bc2ab3b1d7f0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcimodules can not work due to no modules.pcimap file, and has been
replaced by "lspci -k", so we can remove it.
Update lib-build-fix.patch since remove pcimodules-pciutils.diff.
[YOCTO# 5210]
(From OE-Core rev: 57bec61b05c0fea42f988dd52942c7d5ce8833fd)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The UBOOT_MACHINE variable needs to be set so the firmware utils can
know about some configuration settings which are board dependent. This
patch ensures the package is skipped in case UBOOT_MACHINE is unset
thus avoid its build in 'bitbake world' builds for incompatible
machines.
Fixes [YOCTO: #5223]
(From OE-Core rev: d9abcc0a2a691ca60cc1cb2f48f1748b0de73ac8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest upgrade changed u-boot-fw-utils to u-boot-fw-utils-cross, which
removed the on-target fw_printenv (and fw_setenv).
Re-create the updated version of the u-boot-fw-utils recipe.
U-Boot does try to strip the fw_printenv binary by default now. To avoid
this, without patching the Makefile, we add HOSTSTRIP=true to EXTRA_OEMAKE.
The new U-Boot do also require us to configure the build for a specific
machine, thus we change the package arch.§
(From OE-Core rev: 83cb07047658e2e2b2d721e1b01553d4df3d8636)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrades the U-Boot based recipes for 2013.07 release.
This removes the 2011.03, 2011.06 and 2013.01.01 versions so we keep a
single one in core. The following recipes has been upgraded:
- u-boot (remove old versions)
- u-boot-mkimage (remove old versions)
- u-boot-fw-utils -> u-boot-fw-utils-cross (renamed and reworked)
The u-boot-fw-utils-cross recipe has been reworked as it uses the
UBOOT_MACHINE to find default environment for use so it is indeed a
cross binary and not a native one.
(From OE-Core rev: c5fff5748e0aaf7e135fdd464c2104b1d3cbfd5a)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: print message if rule directory is inexist
If rule directory is inexist, the acpid initscript will exit with success,
but the daemon will be not running.
Print message in this case to tell user that the daemon is not running.
(From OE-Core rev: 66a5d15cecdf4bd267dbae5f771ebf3768232481)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
acpid: install events directory at default.
If rule directory "${sysconfdir}/acpi/events" is inexist,
the acpid initscript will exit with success, but the daemon will be not running.
(From OE-Core rev: 8a1c6e465a562b4653f4fb4af3a3845775785485)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.
Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.
[YOCTO #5018]
(From OE-Core rev: aa67b1333b4774e1845f562085f7048df65a644f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The grub_fix_for_automake-1.12.patch replaced pkglib with pkgdata to
make grub_0.97 build with automake-1.12. However, it forgot to set up
the pkgdatadir, thus causing grub_0.97 not shipping files under /usr/lib.
This in turn resulted in an unworkable grub.
This patch fixes this problem by setting up the pkgdatadir correctly.
[YOCTO #4997]
(From OE-Core rev: 883b1b396328e6cd67dcb4ca6fd8975b6e716c0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A dependency was being added on ncurses conditionally upon whether it
had been built first. Explicitly disable this dependency to stop this
from happening.
Note that grub 2.x does not need this same fix because there ncurses is only
used when building grub-emu, which is only built when the specified
target platform is "emu" which we do not use.
(From OE-Core rev: 2ca75dd0718ec37d7f131b8bcd841de6e876bd07)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user accidently tries building u-boot on a machine doesn't use u-boot
(such as qemuarm) the error message doesn't make it clear why u-boot was
skipped. To help, state the machine that was being built for again.
[ YOCTO #4945 ]
(From OE-Core rev: beef66beaee926ec3d3640b79133fdb2ccc404f0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This package isn't specific to qemux86 but all x86 machines that are using the
userspace VESA framebuffer kernel driver.
(From OE-Core rev: 3be0967f14a9865215debe7fae666bd92b4968a0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fuse is autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 5e7c3228acce9f95b506ecce9712e843c35067df)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An empty asound.conf should work for most cases. The existing asound.conf
uses plug dmix which causes arecord to fail without a special -D device
specification on the command line (as no capture device is defined).
Clear asound.conf for the default case. Any needed changes should be
made in the BSP layers.
(From OE-Core rev: 736b0da53b3b38224ae3cb6f0ebd21da7fb04f4d)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PRINC usage is removed from meta-intel, bump core PR values to ensure
no version regressions.
(From OE-Core rev: c6108ebe116eafaf0a22b5f22a3eec87c86859f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get patch from ubuntu to fix this:
error: GRUB requires a working absolute objcopy; upgrade your binutils
(From OE-Core rev: 18bb555268ecc11d0fb7d4f404a38f1b453f2928)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Override the hard-coded CFLAGS used in Makefile to reference our CFLAGS.
Without this patch if the DEBUG_OPTIMIZATION is enabled (using -O0) the
compile log shows acpid still using -O2 because the Makefile has various
hard coded CFLAGS defined. Instead of using the hard coded CFLAGS,
we simply define the proper set within the recipe itself.
(From OE-Core rev: 710e773b0677b75181506959492b37cf77a0951f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few of the recent commits have used inconsistent whitespace with
respect to tabs and spaces for indentation and alignment. Correct it.
(From OE-Core rev: 3472c1f7ab409cd91c1d4782d9e00880b84e3ae8)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a variable called UBOOT_LOCALVERSION which when set will
place a version string in the .scmversion file of the u-boot
sources. This string will be picked up by the u-boot Makefile
and will be appended to the u-boot version. This is done to
make it easier to identify what revision of the u-boot sources
are being run. For example you can use a setting like the
following to add the short commit id to the u-boot version
string:
UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
(From OE-Core rev: 566298409408c6103f7a9871bb13ae5449c4fd64)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
O irony: the grub2/gnulib nag macro that says "don't use gets, use fgets" breaks the build if you're using a recent (e)glibc release that has gets removed.
Fedora already #if 0's the check in grub, so I stole their patch.
(From OE-Core rev: 261e377b08388a288ee521a3629877b89e18e42b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This changes definition of PCMCIAUTILS_VERSION to string from a multichacter constant to avoid segmentation fault of pccardctl command.
(From OE-Core rev: aee67a229304827a12b7776a82fb1c320da9a3c4)
Signed-off-by: Takeshi Hamasaki <hmatrjp@users.sourceforge.jp>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to recent change in the oecore layer grub-efi recipe uses separate
builddir and the paths used in the do_deply need to change accordingly.
This change avoids this build issue:
install: cannot stat `/build-fri2/tmp/work/x86_64-linux/grub-efi-i586-native/2.00-r1/grub-2.00/bootia32.efi': No such file or directory
ERROR: Function failed: do_deploy (see /build-fri2/tmp/work/x86_64-linux/grub-efi-i586-native/2.00-r1/temp/log.do_deploy.5875 for further information)
(From OE-Core rev: 11ba0231244b8a27939969353e3aa668ce78f7c6)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to the correct directory to execute gnu-configize.
(From OE-Core rev: 6972e82b33af69cfef2d05b3637ecfd79a5125da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile fix (patch) was merged upsream
Out of tree builds were also fixed
(From OE-Core rev: 8d8fb11d68fbeebf1c070277e137d3dc1dee6ad6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
v86d was building directly against the staged kernel in the target
sysroot. This has been fine in the past, but with recent (3.7) changes
to user headers into the "uapi" include structure, there are no longer
Without the preprocesor protection, v86d fails to build against any
kernel with uapi header files.
v86d doesn't actually need the whole kernel tree, the exported headers
are enough to build a working binary. This change sets the v86d variable
to ${STAGING_DIR_HOST}/usr, and once the v86d build adds "include" to the
end of KDIR, we have a valid include path to the target sysroot headers.
This also works for pre-uapi kernel headers, so the change is safe for
most (if not all) kernel's with properly exported headers.
(From OE-Core rev: 8d4256b2c9f782368a16c1458e04ed61fa82691a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
P is expanded to it's multi and other prefix / suffix name,
so use BP instead which is the BaseName and Version.
(From OE-Core rev: 4e475a66c23cd2e4e109ff1fcfa2975d595537c5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing SRC_URI pointed to a Gentoo developer's private web
space. It appears that that developer has retired and that his web
space is no longer active. I've updated the SRC_URI to point to a
location where the file can now be found.
(From OE-Core rev: 2046c2a0922c4d67408578d4bf8549435fec8cd6)
Signed-off-by: Andy Dalton <a.spam.filter@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ming Liu
Yue Tao
Jackie Huang
Richard Purdie
Jason Wessel
Paul Eggleton
Otavio Salvador
Roy Li
Anders Darander
Muhammad Shakeel
Bian Naimeng
Laszlo Papp
Chen Qi
Saul Wold
Ross Burton
Laurentiu Palcu
Martin Jansa
Darren Hart
Radu Moisan
Joe Slater
Ionut Radu
Chase Maupin
Koen Kooi
Takeshi Hamasaki
Nitin A Kamble
Robert Yang
Bruce Ashfield
Andy Dalton