This is only used by old hardware, anything that still needs it can put it in
their BSP layer directly.
(From OE-Core rev: b8dc4fc76e3a179d2712ce76e19b664236260724)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also:
* install the alias file in the correct /etc/modprobe.d directory since
this is the directory used by modprobe now;
* rewrite the alias file to be up-to-date with modprobe's syntax;
* remove the postinst/postrm scriptlets because this is just an alias
file;
[YOCTO #3598]
(From OE-Core rev: 427010fd289534d4b4af0bfd74419a4ad0eb5a39)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since update-modules became obsolete, no need for these dependencies.
Also:
* install the conf files in the modprobe.d directory. /etc/modutils is
also obsolete;
* remove postinst/postrm scriptlets since they ran update-modules and
this is just an alias file;
[YOCTO #3598]
(From OE-Core rev: ab262d33993c223ec193786951d43d13ca6691e0)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced incorrect "firstline" with correct "beginline" for telling
where license segment in file begins. Old md5sum was calculated from
the beginning of the file, not from beginning of the license segment.
(From OE-Core rev: 0ada16fe509d9a8608c05d16666243c8ebe4d3b3)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle LDFLAGS properly in the Makefile to remove warning:
QA Issue: No GNU_HASH in the elf binary
(From OE-Core rev: a24a5e5c9ede4275f7188935a9410b84d406ed19)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for board specific fw_env.config file if available.
(From OE-Core rev: 5b6a8e987f9039aca63d97bc42421b78acab8a3d)
Signed-off-by: Franklin S. Cooper Jr <fcooper27jr@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Create a new packagegroup-core-device-devel which pulls in everything
that qemu-config used to, with the exception of anjuta-remote-run -
this is unlikely to be widely used
* Move the remainder of qemu-config to distcc-config and allow
DISTCC_HOSTS to be configured via a variable of the same name
* Use SUMMARY instead of DESCRIPTION for single-line description since
DESCRIPTION is defaulted from SUMMARY if not set
(From OE-Core rev: ac510cb82c007f987b481df74c7a5fede81fa85a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This need not be specific to qemu machines, allow it to be used
elsewhere in isolation.
(From OE-Core rev: c48f87a3fa9c61aaeedbcf5712a699c27d940a3b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanly shutting down the machine from Sato is useful on other machines,
not all of which have a power button that otherwise enables this, so
make it not specific to qemu* and add it to task-core-x11-sato.
(From OE-Core rev: 738005f4713c0da7bc04582a41efa956efdb9cc0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qemu-config initscript was only starting oprofile-server, so move it
to the oprofileui-server recipe.
(From OE-Core rev: 3063126e2c8ec72e900a48f7048aaf9662606792)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Given that support for Anjuta is unlikely to be needed by everyone and
is by no means specific to qemu, split it out to a separate recipe. The
following changes were made in the process:
Also depend on dbus instead of dbus-x11 since dbus-launch is now back in
he main dbus package
Part of the fix for [YOCTO #1690].
(From OE-Core rev: e6755e3351ccf1116c06b9608728630505908ce4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These files are all trivial in nature; so avoid having to have another
copy of COPYING.GPL just for this recipe - especially as it's about
to be split apart.
(All of the files in SRC_URI have only ever been contributed to by
employees of Intel and/or OpenedHand.)
(From OE-Core rev: 4d29ef0fa885299392779042830b95176e31fe11)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added -Wno-unused-result because of a read() with no result, and causing
error due to -Werror
Updated grub recipe because of a patch name change
Removed unnecessary patches (merged upstream).
(From OE-Core rev: 88cd5d99918a896f515e8bb59b7238f3ad50adff)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2916]
On some systems the host version of flex may be too old to work properly,
instead we depend on flex-native to ensure that we have the proper version
available to us. (Flex version 2.5.35 or newer is requried.)
(From OE-Core rev: b53b4c4d6dad745b2eb0ab804f7975146a81aedf)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Clarified commit message
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If fbset can't find a framebuffer we end up with a mess on the console.
We might as well avoid doing this on machines without a framebuffer.
(From OE-Core rev: f5c39ea822b440ae4bdd38be94fcf8a2814d2229)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 3068d5c44667bc238f2331d36cb116403560c83f)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 998b94adbbc0f0f036c5816fbf6ee594dba90c1c)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 72fd0993d8643d7ca52d954d65395585fdf34b03)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with old regexp it wasn't reentrant, causing stuff like this:
-LD = $(CROSS_COMPILE)ld
+LD = $(CROSS_COMPILE)ld.bfd.bfd
-LDR = $(CROSS_COMPILE)ldr
+LDR = $(CROSS_COMPILE)ld.bfd.bfdr
when do_compile was reexecuted, also breaking LDR variable and
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-bsp/u-boot/u-boot/0001-config-Always-use-GNU-ld.patch
when it was used together with u-boot.inc from oe-core (meta-ti is using own u-boot.inc)
* This patch is also better solution to ld-is-gold problem then regexp in metadata.
(From OE-Core rev: f78044f85ab1a0acce852a7032fc0c81285cd4c1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2847]
Before use usbbuslist, we should check if it is valid.
(From OE-Core rev: fc6c6ce73105518f4106da469ed81d53d860a290)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By virtue of having #!/bin/bash, the usb-devices script declared that it
requires bash, however manual examination, checkbashisms and tests with
dash and busybox show that it doesn't contain any bashisms, so change
the script's header and remove the RDEPENDS on bash.
Additionally, update-usbids.sh was manually checked for bashisms, run
through checkbashisms and tested with busybox (although it did not have
a bash-specific header).
(From OE-Core rev: 651b223c5fc93c7504e304e954b9ae4640ed47c6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This cleans up code added in 2008 to use modern syntax. It is functionally
equivalent.
(From OE-Core rev: a73b314c95a21e44dc584c58639a038833c9756b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this change, an effective reautoconf happens at compile time with potentially
incorrect parameters. This change ensures it happens once, in do_configure with the
correct parameters.
(From OE-Core rev: cae93d99497b822de9607261d225385423d5daf2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested in 70067f082a we do not
need this dependency.
[YOCTO #2527]
(From OE-Core rev: ef637e417ae1c2dff7fc0ad6cb30989e72ac35ab)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current fix_for_automake patch is not complete. It fixes the install
dir of grub-mkconfig_lib but neglects to update its references in
grub-mkconfig and the grub.d/* scripts. grub-mkconfig would complain:
# grub-mkconfig
/usr/sbin/grub-mkconfig: line 98: /usr/lib/grub/grub-mkconfig_lib: No such file or directory
Backport upstream patch to fix all the references.
[YOCTO #2777]
(From OE-Core rev: 72a582874704838ddd19700bf7c300d7a7faaf9f)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Live image installer did not preserve BSP specified console= kernel parameter.
This patch updates the init scripts that are responsible for grub.cfg creation
so that options like console= are passed allong from installer to installed img
[YOCTO #2426]
(From OE-Core rev: e18c59eb5a61f265b9cad6de68359fa1430b0e58)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2527]
Modify configure.ac and the generated configure script to avoid using
help2man during the compilation process. For grub-efi we are only
deploying the EFI payload and are not installing grub on the target
root filesystem. Therefor, we do not need the man pages.
Cleanup the SRC_URI whitespace while we add a line to it.
(From OE-Core rev: 035bc3f5ee99ed3bd74219d9717239299e4bc765)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Paul Eggleton <paul.eggleton@linux.intel.com>
CC: Radu Moisan <radu.moisan@intel.com>
grub-efi-native whitespace cleanup (INC)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The setting is the same in all recipes, so move it to
the shared settings in u-boot.inc
Since FILESDIR is also being phased out, use the FILESPATH
setting as suggested by Richard Purdie.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 1b78904b115b50172cf82948d8a68dc3a98005ce)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: 6597f7c77e1ccb21d73f8e3cec25bb27a901b500)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcmciautils is the appropriate PCMCIA package these days.
(From OE-Core rev: 5066f7e9750253bc4678f2884e15f0333e60932b)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The u-boot tree is fully capable of parallel builds, so this
setting should not exist as a blanket setting for all of the
recipes. Going forward, if there is a parallelism issue
in u-boot, it needs to be reported and fixed there, and not
with the "make -j1" band-aid approach.
(From OE-Core rev: 7fdd1f82803df9752e908f01f7643d66b82a690e)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want to force everyone to be stripping the -Os
flags from their u-boot builds. Remove it, since it pertains
to an old toolchain issue that is no longer relevant, and it
breaks the powerpc mpc8315.
(From OE-Core rev: 5e3f777f9fcc986ae66203651830b5765bca49fd)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If building on 32bit host and creating 64bit libraries, the target
package builds should not invoke the 32bit hosts's ar. Specifically
you will get an error message like:
x86_64-linux-gcc -m64 --sysroot=/opt/qemux86-64/tmp/sysroots/qemux86-64 -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -Llibs/x86emu v86_x86emu.o v86_mem.o v86_common.o v86.o -lx86emu -o v86d
libs/x86emu/libx86emu.a: could not read symbols: Archive has no index; run ranlib to add one
collect2: error: ld returned 1 exit status
(From OE-Core rev: 4bb926513084dfa6ebf5598a177239315530276e)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sz, sx and sb links were created incorrectly to lrz, they should
point to lsz.
(From OE-Core rev: 663b608357b86aba5cdf7f07291893725e579b75)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was using distro gcc to build binaries for target. This got detected
on fedora 17 alpha, on which it hit an gcc-4.7 issue.
This Fixes Bug: [Yocto #2291]
More information in the patch header
Thanks to Saul Wold for suggesting to remove the --target parameter from
EXTRA_OECONF var.
(From OE-Core rev: 26ae0e53411c1ea3afbb2e0c6d9dc2f1b0690751)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 2257]
GPT partitions are common for EFI systems. Add support for them by
including the part_gpt partition module in the grub-efi image. In
order to allow for loading a Linux kernel from an EXT* filesystem,
include the ext2 module as well.
With this fix applied, I was able to boot from a USB key using a
GPT partition table with the following layout:
$ sudo gdisk -l /dev/sdc
GPT fdisk (gdisk) version 0.8.2
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdc: 7669824 sectors, 3.7 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 68FA7CD4-E0C3-4A8E-82B5-1331C9B17A3C
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 7669790
Partitions will be aligned on 2-sector boundaries
Total free space is 7428816 sectors (3.5 GiB)
Number Start (sector) End (sector) Size Code Name
1 34 32801 16.0 MiB 0700 # FAT16
2 32802 240974 101.6 MiB 0700 # EXT3
From within GRUB, booted as bootia32.efi from the BOOT partition, I
booted the OS with the following commands:
grub> linux (hd0,gpt2)/vmlinuz rootwait root=/dev/sda2 console=ttyS0,115200
grub> boot
This change will enable BSP developers to use the grub-efi image in
their own images as well as enable upcoming changes to the installer
to support EFI.
(From OE-Core rev: a2c6687410f00623efe8dfcb22385cbbc7f2e1a9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Kishore Bodke <kishore.k.bodke@intel.com>
CC: Rahul Saxena <rahul.saxena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
setserial's license is GPL version 2.0 per:
http://sourceforge.net/projects/setserial/develop
(From OE-Core rev: 07480748d0f2d5da5af64284997fe9b51607cc21)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the following package warning:
WARNING: File '/usr/bin/test-libacpi' from libacpi was already stripped, this will prevent future debugging!
(From OE-Core rev: 678b895fba610c71fcbb13555bf96322dcb15aea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using rootless X, /usr/sbin is not in PATH and thus running "fbset"
will fail; so specify /usr/sbin/fbset instead.
Fixes [YOCTO #1986]
(From OE-Core rev: fb2df75e1552e60c67449c06cd80accc40ea534e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "1" with getVar is bad coding style and "True" is preferred.
This patch is a sed over the meta directory of the form:
sed \
-e 's:\(\.getVar([^,()]*, \)1 *):\1True):g' \
-e 's:\(\.getVarFlag([^,()]*, [^,()]*, \)1 *):\1True):g' \
-i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* We have various variables which are either not quoted at all or are half
quoted. This patch fixes the bad exmaples so everything is consistent.
(From OE-Core rev: 960ee8076e860353a05eb2eb7f825a455c54698d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides the 'fw_setenv' and 'fw_getenv' programs for the target
so that the U-Boot environment can be modified from Linux. These
programs are system-agnostic and rely on a config file that a given BSP
would provide and potentially RRECOMMEND this be installed.
(From OE-Core rev: 4a2543c0641f1df6d74c18cfe0c3ac3cfd50e60c)
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for different suffixes found with later u-boot
versions which have switched from .bin to .img
* Allow recipes that include u-boot.inc to also package an
SPL if they build one.
* Minimum requirement is to set the SPL_BINARY value to add
the SPL to the u-boot package as well as into the deploy
directory.
(From OE-Core rev: 2965aa2faaccce43f6c3e451c0a2ded3734766e4)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
configure.patch was missing a closing quote in a sed expression which
causes script execution to error on less forgiving shells such as dash.
(From OE-Core rev: ad72484a2783afa948966263629006558fbde476)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Second version of the patch that adds grep to RDEPENDS.
Fixes [YOCTO #1887]
(From OE-Core rev: 6d4ff87b935d61aae63260262c0f48fe7e9d2a48)
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit replaces earlier patch
(grub-1.99_fix_for_automake_1.11.2.patch) which did not work on all distros.
Fixes these errors observed with automake 1.11.2
The useof pkglibhas become more strict compared to the earlier release
of
automake resulting in these failures.
Fixed the files related to automake to avoid the issue.
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
| ERROR: autoreconf execution failed.
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| Makefile.am:6: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
(From OE-Core rev: ecc383f72791c3c4a3e7ccc646469706b88e68fb)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
alsactl creates the state files in /var/lib/alsa by default so switch
alsa-state to use files in that location.
Further, update the alsa-state init script to have the location of the
state files sed'ed into the script at do_install time (so as to remove
hard coding of directory paths).
(From OE-Core rev: 896924c72e7b37c18819229e8160c34cdf4465c8)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
alsa-state adds an init script and configuration files to enable a
consistent and centralised mechanism for setting and restoring alsa
configuration.
(From OE-Core rev: 8bc43c40cf72d5543924229146fa4106ad87b147)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes these errors observed with automake 1.11.2
The useof pkglibhas become more strict compared to the earlier release
of
automake resulting in these failures.
Fixed the files related to automake to avoid the issue.
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
| ERROR: autoreconf execution failed.
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| grub-core/Makefile.am:5: `conf/Makefile.common' included from here
| conf/Makefile.common:150: `pkglibdir' is not a legitimate directory
for `SCRIPTS'
| Makefile.am:6: `conf/Makefile.common' included from here
| conf/Makefile.common:140: `pkglibdir' is not a legitimate directory
for `DATA'
| Makefile.am:6: `conf/Makefile.common' included from here
| autoreconf: automake failed with exit status: 1
(From OE-Core rev: e9c5c354086546efe4114c6225d05116fb18b9fe)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is for tslib.
(From OE-Core rev: 80fcbee25036d2051538e26cd8b3d2989b0d276d)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches were marked by "UpstreamStatus:" line, fix it to use
"Upstream-Status:" instead.
(From OE-Core rev: b33b373c9a33fe0ff51104c96d1e5b105efc63ed)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
HOMEPAGE pointed to an sf.net page that said that the
page did not exist any more and after that it redirected
to the denx.de page; updated HOMEPAGE to point to that page
Also improved the description to use the official capitalisation
(From OE-Core rev: e0ebe12541a6628b7629a9be5918d0e7ea92aa33)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specify /EFI/BOOT as the grub prefix so the grub efi payload can find
the grub.cfg in the same directory. Ultimately, it might make more sense
to install the grub tools and the grub-core modules to sysroot and make the
grub-efi bbclass generate the image in the required format as part of the
bootimg generation. However, bootimg is currently the only user, so make the
correction here to resolve the immediate issue.
(From OE-Core rev: bc046c58c8f3c462972e9004dda2612b58376492)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without the efi_gop module, the GRUB menu would work, but the Linux
kernel messages would not be displayed to the physical console. Adding
efi_gop causes grub to pass the proper information in the boot parameters
pointer such that the Linux kernel can detect and use the EFI framebuffer.
(From OE-Core rev: 2c2770f89b3331f635647ba1ef87d8f63cfcdfe2)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipe dirs normally have the name of the (main) package and the official name is u-boot
(From OE-Core rev: e9899d52ade2181bd97dcf79bec64650e8b0f718)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
to avoid this build error on x32:
| strip: Unable to recognise the format of the input file `test-libacpi'
| make: *** [test-libacpi] Error 1
| ERROR: oe_runmake failed
(From OE-Core rev: 4d7882a57210c88dd9e2b8619b2bd0fa4bdbf9f8)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libacpi doesn't use base_libdir for install. This patch adds
base_libdir support so that x32 libraries are installed properly.
(From OE-Core rev: 98a363ef0202511cf32f8408011c4ad178173af7)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dbus-x11 could be not needed by an image without x11.
So I modified this bb file to enable dbus-x11 when x11 is in DISTRO_FEATURES and disable \
dbus-x11 without x11 feature.
[YOCTO #1674]
(From OE-Core rev: f78cb9fbc90f6e40cd20c59ba544389662d87659)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton
Laurentiu Palcu
Marko Lindqvist
Constantin Musca
Muhammad Shakeel
Richard Purdie
Franklin S. Cooper Jr
Radu Moisan
Paul Eggleton
Xin Ouyang
Javier Martinez Canillas
Martin Jansa
Roy.Li
Matthew McClintock
Jesse Zhang
Khem Raj
Darren Hart
Paul Gortmaker
Saul Wold
Robert P. J. Day
Jason Wessel
Mark Hatle
Nitin A Kamble
Otavio Salvador
Stefan Herbrechtsmeier
Elizabeth Flanagan
Tom Rini
Chase Maupin
Joshua Lock
Koen Kooi
Marc Ferland
Shane Wang
Liming Wang
Frans Meulenbroeks
Xiaofeng Yan