The YP doc set was using a link to an out-dated video that
showed how to configure and run Eclipse. The video was very
old and Jessica suggested just removing it. So, I replaced
all occurrences of the link to the up-to-date appendix in the
SDK manual that provides information on the latest supported
version of the Eclipse IDE.
(From yocto-docs rev: a414addb427337dc76a05cf3f56bf8aeec1a7c1b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to the section on how to set up Eclipse had been broken
for a while. I fixed the link so that it goes to the appropriate
section (appendix) in the SDK manual.
(From yocto-docs rev: ab2af9c0b237285c6989832db306a42957a6187d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 98ebe9acccceea2b833c1372a3e664befd1b6aef)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 83a9a3aa5f20c7f389306eea9213eabea997aba1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed some eMenlow stuff
* Cleaned up the description of the BSP structures we have now.
* Various links fixed into the SDK manual.
* Other minor fixes.
(From yocto-docs rev: 5e45005d7ff2254df2754a5ea2d7efd7f1c19a42)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I went through and made some judgement calls on the use of
"native" and "sdknative". I tried to make sure that the reader
understood the real meaning of these terms.
(From yocto-docs rev: d711e8c6dfb32a4ad79e9d11dbf44fbc759d0245)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7535]
Removed this from two places.
(From yocto-docs rev: d169ce99610745e8c1b4b53d898f526e557af665)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These kernels are unsupported for the 1.8 release. They will still
show up in the YP source repos but the recipes are removed from the
poky area. Updated all references appropriately.
(From yocto-docs rev: a9adc071409fd31dabc3affec12350c300312600)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the old manual set had worded the use of the
BB_NUMBER_THREADS, PARALLEL_MAKE, and BB_NUMBER_PARSE_THREADS
had become depricated. It suggested a lot of user intervention
to get these variables set to have the build system utilize
optimal parallelism. The change a while back to the build system
where the variables are set to the number of build host cores
now makes the variables automatically be set to their best
values. I have gone through the manual set and changed wordings
appropriately to reflect this.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3a27b1792c92a2f22173315e2732f672cdad2c78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item on supported BSPs was very centric on meta-intel.
I rewrote the section to not be so exclusive.
(From yocto-docs rev: d8118bb6124fbbb2340ae8720cd6187fd5546967)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some links and fixed up some replaceable items.
(From yocto-docs rev: 5c9ce934f13c68c2efbd952f399a8b88e87eb761)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4601]
Added a couple notes saying that you need to be in matching
branches for meta-intel and poky.
(From yocto-docs rev: 02bd63829b1d98f21183a10707753e9767bfe68e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2424]
Some imgage names were cleaned up to have more meaningful names.
These doc changes here take care of changing "core-image-basic"
to "core-image-full-cmdline".
Five instances changed.
(From yocto-docs rev: b758f9645e66867b5728da1dd989bae70a216fcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did a read-through of this chapter in preparation for the YP
1.6 release. Found several little areas that needed attention.
(From yocto-docs rev: 73d56a4c948c675afd4cde0e3321a944a02013cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to add a cross-reference anchor tag to the term in Chapter
3 and then the link itself.
(From yocto-docs rev: 227c8ce85f4a8e81f14582cdc7c54b5b832d3aa0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
scott (or anyone else) is welcome to use any or all of this, or
tweak to taste. i have a few other concerns with ch 2 but i'll read it
more carefully to make sure i'm reading it correctly. - rpjday
I implemented all but the addition of MIPS64 as it is not tested
using the autobuilder yet. - scottrif
(From yocto-docs rev: 927ff9be66a7471a33faf18a1122ce8b2bd21805)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to remove implications of meta-intel clone
importance regarding working with BSPs.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: e5f80aadf6f651af6efae6e99d0a4d9b6e76fc99)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix for this issue, which is removal of the tarball install
methods for poky and now evidently meta-intel. This commit removed
the tarball install step for meta-intel in the "Supported Board
Support Packages (BSPs):" bullet item in the getting setup section.
(From yocto-docs rev: 98f13d8178a63258e2b80d78796e473d09abb452)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix for the bug. This part removed the tarball install
method from the getting setup section of the second chapter. I
did some rewriting to smooth it out.
(From yocto-docs rev: b051433e34e0f3a46deba0b2b4815ab77fde62c8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor read-through edits.
(From yocto-docs rev: 8a2df890390dc6d64f364c0f4c294cc0742e3f43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YP 1.5 default kernel is 3.10. This is a change from 3.8 in
the previous release. This change affected several areas of
the documentation.
1. The BSP Guide had a crownbay BSP structure that did not
account for the new default.
2. The yocto-bsp tool output still asked for the 3.8 kernel
as the default.
3. The recipes-bsp section had 3.8 used and had some bad
listings that had to be changed.
4. The recipes-graphics section had 3.8 used and also had some
stuff supporting two versions of the graphics (emgd and
noemgd). I had to pull the emgd stuff.
5. There were miscellaneous spots in the dev-manual that were
referencing 3.8 as the default kernel. Particularly the
list that shows what kernel repositories we have. That needed
updating.
(From yocto-docs rev: 9826ce760884f2ce5a4eb72c6a731a85cd6f2b2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the poky-extras repo name to meta-yocto-kernel-extras
repo. This repository had become stale and Bruce did some work
to freshen it up a bit. The name was poor too. That drove the
name change.
(From yocto-docs rev: 4fa2b0f86cfe7191b8de7577d8d8ad6adb984a4e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some re-wordings as suggested by Bill Traynor.
Reported-by: William M.A. Traynor <wmat@alphatroop.com>
(From yocto-docs rev: 2510d9795720afc0309a10b18605e5af4a83769b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the transcripts used to set things up. I also changed
the kernel used in the examples from 3.4 to 3.8.
(From yocto-docs rev: d83e5a5a73777baf95b5c4558f25a5b0b27c204c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a couple of notes to point out the ease of creating your
own distro and not just relying on a Poky distribution. One
note is at the very beginning of the manual and mentions
Angstrom as an example of a distro based on the YP. The
other note is at the beginning of the second chapter.
(From yocto-docs rev: 1525a5e34c615cbfd25aeb12cc7a27ef95b51eab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added "Debian" as a distribution for best results.
2. Fixed a link to the Hob page and two links for the
Build Appliance.
3. Three typos fixed and a few grammar items fixed.
(From yocto-docs rev: 0b381094ed9cc2d66895d4ad7c63005c8a918eb1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made minor changes as needed due to some new sections, links,
and capitalization standards.
(From yocto-docs rev: bc966e5a78dadd14ecf1896a36e40a9b256bae77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the part of the example that sets up for the
first core-image-minimal build. Put in the variable to use
for the build environment setup script, updated some changed
output from some of the commands, etc.
(From yocto-docs rev: 0b4b2ddf9a78a9d6d218ed9a6f0acd3e876d9581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a line to cd to the poky directory so the example makes
sure the meta-intel directory is created in poky as it states.
(From yocto-docs rev: fdeff0fc2c61c521eaf9d3c48429792f1559c2a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated so that the repo poky-extras is for sure created inside
the poky repository.
(From yocto-docs rev: b01ea76ded2ade66f2cb19b37d9e9d8d5d2e96c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.3 there is not longer a toolchain tarball. Instead, there
is a wrapper script that lets you install the tarball. This
fundamental usage model change caused several ripples throughout
the documentation set. I have changed wordings and examples
to reflect the new paradigm.
(From yocto-docs rev: afb2069daa91e04c0f78ba425a6b184cb820d888)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day pointed out a link in the development manual that
was for the BitBake User Manual. The link resolved to an old,
non-maintained version of BitBake documentation. According to
Richard Purdie, the BitBake docs referenced should be the ones
that ship in the bitbake/doc/manual directory of poky. The
YP docs had been using a variable named BITBAKE_DOCS_URL that
also resolved to the antiquated user manual site. Consequently,
there were many links that needed fixed across both the YP
Development Manual and the YP Reference Manual. Each of these
references now points in general to the bitbake/doc/manual
directory in poky for more information.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 12f77236b602e9ec43e845c8cec060ad342af19c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed several occurences of cross-references to whole manuals where
the formatting was split in the <ulink> statement. The <ulink> tag
and the manual title must be on one DocBook line in order for the
sed scripts to correctly process the links when the mega-manual is
created.
(From yocto-docs rev: 0dee12d518c892f59c0446e1c7b5d0f71b6ee22b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way I refered to the YP Quick Start was inconsistant.
I have made edits to remove these.
(From yocto-docs rev: d9487c60db23861e8a9dd2c81ac46d4960abd462)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the first sentence of the description of how to use QEMU images
with NFS server. This is feedback from Scott Garman's review.
(From yocto-docs rev: 6a33b1b58bd72756baf57228b7348ff662248012)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two areas of the manual updated to reflect the fact that not all
QEMU images have an SSH server in them.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a173d8cb05ee695b02188a037ee047db016c6a67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the ADT manual has changed to the "Yocto Project
Application Developer's Guide." This change had some ripple effect
regarding cross-references into the manual. These are now fixed.
(From yocto-docs rev: 7ba25c470b03a85098388e6cca7c78a6ebb245d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Scott Rifenbark
Robert P. J. Day