Fixes [YOCTO #7386]
Apparently, copying HTML displayed commands that have a
double dash created through "‐‐" in the docbook source
causes some issues in the shell. I have scrubbed the manual set
to replace any "‐‐" strings with "--".
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e88b813b71d7d6d8acd8a8638f2db71265145b64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First edits to update this section to support the Luna version of
Eclipse. I weeded out Juno, which leaves Luna as the preferred
version and Kepler as a second version if they don't want to update
to Luna.
(From yocto-docs rev: 4f2dc237aa3498402cdf637ac2e85fdf0c3bf8a0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the area from which the Eclipse Git repository is located.
This has changed.
(From yocto-docs rev: ec2bf4125877b28dae0681c8b578c7bebec5a5b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These kernels are unsupported for the 1.8 release. They will still
show up in the YP source repos but the recipes are removed from the
poky area. Updated all references appropriately.
(From yocto-docs rev: a9adc071409fd31dabc3affec12350c300312600)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to be more accurate.
(From yocto-docs rev: 1acb7ce94a4f4b02cc50d1e098f04a77d9a53ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the last paragraph example as it is not a good example.
Unfortunately, there is not a good example so I replaced it with
a minor suggestive work-around at the end of the first paragraph.
Also, used some <replaceable></replaceable> formatting for the
first paragraph.
(From yocto-docs rev: 6c3989fd4fe41a6434d70208d59747060e62a366)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7256]
In the "Serial Console Connection" section there was a link to
TEST_POWERCONTROL_CMD when it should have been to the
TEST_SERIALCONTROL_CMD variable.
(From yocto-docs rev: 9ec64c86bd4171a017898daa332d2a98fea0358a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for "tc" was described as "the called text context..."
rather than "the called test context...". Updated the description.
Fixes [YOCTO #7269]
(From yocto-docs rev: 0da4437c26225ce0302f10f7ba3c012f1f990c74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits help place the two sections within the new organization
that basically splits out the devtool and quilt methods as ways
of modifying your source code.
(From yocto-docs rev: 1dc2e8783d9774bb98a30e06d114f1c9bfb85b71)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the 1.76.1 version in all the customization layers so
the manual revision tables will build with boxes.
(From yocto-docs rev: 85a31ef53a59d17bed23ebf57a14db507eb21338)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed draft of the new devtool material. This commit affects
some linking and figures across the YP doc set.
* Added the build-workspace-directory.png file to both the
dev-manual and the mega-manual.
* Updated the Makefile to include the new figure in the TARFILE
for dev-manual and mega-manual.
* Re-did the section organization to pull the quilt and finding
source file out of the "Modifying Source Files" section.
(From yocto-docs rev: 4585b9fbb1636ae3c65e2e3ad2d1d6baca636e59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text to note how this term is used, what makes up the
OE BS, and how the term "build system" is used in general.
(From yocto-docs rev: 2af0a59a84fd1cf6d23db29f470cb5644f962746)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of terms had a "build system" term that basically
described the OpenEmbedded build system. I dumped this entry
in favor of "OpenEmbedded build system." I updated the term's
description to cover the generic term "build system" for no
confusion.
(From yocto-docs rev: 0ada8348a2ace6ce99e640d1c1f21812188151d5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This start to the script is not really necessary and is in fact
the rare case. I have removed two occurrences of it in the
"Post-Installation Scripts" section where it was used in code
as the best form to create a script.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f7c1a1e135e8a9d76005bb6ae7b9cc2810f0af90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a typo in this list. The "qemux86-64" should be "qemux86_64".
(From yocto-docs rev: 32f62f51c1574f3a479c12b67aeba7ebcb743a02)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on "Handling a Package Name Alias" was confusing and
wrong. We decided to eliminate it. The section was removed from
the dev-manual. The corresponding variable DISTRO_PN_ALIAS
remains for now but without the cross-reference link to the
now missing section.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9938cdcc8488baffa4252288bf45243055e76fed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed out the occurrences of eglibc and replaced them with
glibc.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 868ceda79b1c738349e512e523c850b24f9232ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way the old manual set had worded the use of the
BB_NUMBER_THREADS, PARALLEL_MAKE, and BB_NUMBER_PARSE_THREADS
had become depricated. It suggested a lot of user intervention
to get these variables set to have the build system utilize
optimal parallelism. The change a while back to the build system
where the variables are set to the number of build host cores
now makes the variables automatically be set to their best
values. I have gone through the manual set and changed wordings
appropriately to reflect this.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3a27b1792c92a2f22173315e2732f672cdad2c78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example was out of date. Updated accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b95535fca149abbbe4fee7e74ebc13d2bb376c27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated some text to indicate that you should put patch files
in $BP, $BPN, or "files." Also, added more on how the patch
files suffix is (i.e. accounting for compressed suffix names
like diff.bz).
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d9e23da24e9d86ec5e2b9d4067667478f3e56ba1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch files can end with compressed suffixes such as
diff.gz and patch.bz2.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 69993710d1466dddc804c33c1d76f46d0982d28f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Fetching Code" section, some loose description of how the
build system reacts to the two checksums in a recipe existed.
Robert asked some questions about how the behavior would be if
just a single, correct checksum existed and if the two existed but
only one proved correct. Turns out, if you supply a single one then
the build will not throw an error or warning. If you supply two
but one is incorrect, then the build will throw an error or
warning. I updated the text to be technically correct without
going into huge details.
(From yocto-docs rev: f49a744821d9326314803d5003158bd402e74e0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to the original patch. These edits were caught by
Robert P. J. Day.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b50a2e44eccd50166351611f17c643cbbc60f8b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was modified to fit in with the style of the book.
(From yocto-docs rev: 7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bob Cochran pointed out that the skeleton recipe shown in the
example is not really what is created by newbb.vim. I updated the
example to match.
(From yocto-docs rev: 2dfa712522aec5204b9e739b6060109090280011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was a bit confusing on the use of "_prepend" as associated
with the FILESEXTRAPATHS statement. Especially in the final note
where it indicated you don't need "_prepend" if your append file
is not adding any new files. I updated the note to be more specific.
Another small change I made was to replace the Crown Bay BSP referenced
in the section with the Emenlow BSP, which has a longer life span than
CB.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 35bdc8031bc4ecf1ea321b0cafade97eeaa56513)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you "make" the mega-manual, there were four tags across the
various manuals where the same string "id='intro'" occurred. This
causes warnings during the make process. I updated the strings to
be unique. There are no cross-references to these so no collateral
issues were caused.
(From yocto-docs rev: d0e770e0ad797031a75e2373a41723408b4b051c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Customizing Images Using Custom IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES" needed a bit more clarification on
the image features. The text pretty much passed off image
features as all mapping into package groups, which is not true.
Some, like "debug-tweaks for example, are more like general
configurations. I updated the section accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 7dd55ff0bd6f7923e22695ed7323df5cfe17d1d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7029]
I was missing the "sysroots" part of the path. I added this
to the pathname.
(From yocto-docs rev: 077efc8063ed01ef4067f7e71912dd52c1f6a4a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I need to get back to how it was working and then fix the table
box issue from there. Using the 1.76.1 stylesheets makes the
build too long for the manuals and sometimes the XSL sheets do
not load.
(From yocto-docs rev: 7bc502fa069fdc4aebf5705513bb82127716859f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was pointing to a poor example in meta. I substituted
in a better example and rewrote the section to flow better around
that example and the final fabricated one.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c7f07a2993d5c1b8e0c8b7da0e9d4c28242a5e26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a sample string in this tree that ended in "ro" when it
should have been "r0" (as in release 0). Anytime you update a figure,
the modified file must go in both the "figures" directory of both
the manual (dev-manual in this case) and in the mega-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 8e75cc23fbf03f355fade416a12b7c8fe1e656a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ea4489f856417d70b54a7e38da32e068cbd54cbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied (in spirit) the changes here... Some literal and some
with changes.
(From yocto-docs rev: 0ccf8a43264981accbe42f729c723804e5b69b72)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where the lines for the manual revision table
are not appearing. For some reason they do not appear when building
the docs using Ubuntu 14.10 and the "current" XSL transformation
files. So, I backed up to the 1.76.1 version, which is the nearest
version where the issue does not surface.
(From yocto-docs rev: 82b15986b97b9ed082b652b562eaaf843572fdff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
Per Martin Jansa, added some information in the bullet item that
talks about the tools and the cases that can cause issues when
tuning things by machine or architecture.
(From yocto-docs rev: e8e47828df65abdc18bbd681c47719a7df77b00f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
I applied some review edits to this section as suggested by
Richard Purdie.
(From yocto-docs rev: a1898cf65537e732e0e42605bb28d636077e7f56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
This is the first draft of a new section on multi-machine builds.
(From yocto-docs rev: a47fd17295d943bff482a0747f3b2e69831aa985)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an entry for the 1.8 release stating that the release
is slated for sometime in 2015.
(From yocto-docs rev: 9799a7848f24024048eae0cbed470a2be4b4b879)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section to account for some new variables and
several more ways to run tests against expanded targets. Also
added power control section.
(From yocto-docs rev: a0f08466c00ae51a99d790fa6c9dccef2e0f1518)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the second round of review edits from Paul Eggleton.
Minor fixes.
(From yocto-docs rev: 2c7c45c8f09b724e92e8b59fe47834226b44b4fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the full set of first draft revision edits for the
new migration section for 1.7. Comments from Paul Eggleton.
(From yocto-docs rev: 90586addbc719ecaf7c768b267adf0e988e27b74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the linux-yocto 3.4 kernel from the list in the
section describing which kernels we support. Also, added
the 3.17 linux-yocto kernel to the list.
(From yocto-docs rev: 41f57a9abe1201ed2fb657f8441c97f86f75200a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "October 2014" to table for all manuals that have the
table.
(From yocto-docs rev: 3f9ceb4dd2397fe907bf701c842277eb65d11a56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item on supported BSPs was very centric on meta-intel.
I rewrote the section to not be so exclusive.
(From yocto-docs rev: d8118bb6124fbbb2340ae8720cd6187fd5546967)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
Added a cross-reference to the meta-selinux layer in the section
that describes how to make images more secure.
(From yocto-docs rev: 0c96273ee857808046c5a76517c1eda4aa703c81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a short note after the example that shows how to set up
the EXTERNALSRC variables stating that the externalsrc class
needs to be either globally or locally inherited.
(From yocto-docs rev: db935135c0b060e06f6a63530df995d286002598)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new example on how to set this from the recipe or the
recipe's bbappend file.
(From yocto-docs rev: bc0d9de3378f3462729301e74419b7dede17558b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another occurrance of where I needed to add a <replaceable>
tag set in an example.
(From yocto-docs rev: 586e5a590bb5382a28fde4670fdcd6cbb75f6c32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I missed a <replaceable> tag set on the example. Adding it
clears up confusion for how to use the variable.
(From yocto-docs rev: 8bbf2a012e580d82aaf9c9a98ad5dab1aea64f7b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Found and fixed several areas with issues.
* Scrubbed for user-supplied input to make it use the
<replaceable></replaceable> tags.
(From yocto-docs rev: 0e1c7ad31921ee7d4ee0d7d4ece01303a25a5d60)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6621]
Applied a few review edits for this fix.
(From yocto-docs rev: 99511bbcfa1de2f7bf691da1a002913f3a7f6034)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced user-supplied variables with <replaceable></replaceable>
tags to get proper formatting. I inserted several references
to the new QEMU chapter for help using QEMU. I updated a note
on the BSP available so that it is a bit more generic and not so
dependent on an exact list within meta-intel and the source
repositories.
(From yocto-docs rev: daef4406e7c3e45dd5d98d565e519d91939f6965)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced angled bracket items for user-supplied variables
with the <replaceable></replaceable> tags.
(From yocto-docs rev: 393af6c0cfbfc0f3921bc1eb1fdbd3dd734f51ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some links and fixed up some replaceable items.
(From yocto-docs rev: 5c9ce934f13c68c2efbd952f399a8b88e87eb761)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6620]
I altered the path name of the .gdbinit file in the text to prepend
~/ to it to reinforce what file the user must modify. I also removed
the /home/jzhang string in favor of ~ to make it more general.
(From yocto-docs rev: ff09d3a5666c97598adf385f63dee4b30b0f1792)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits from Paul to better word this section.
(From yocto-docs rev: 51425ab506050ee5ba30d5c3c10639d5a1b8cc8e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These catches are from Robert P. J. Day and applied as a
patch.
(From yocto-docs rev: b805795e9bf68286aa5b79a94792e2fefd293b92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Accidentally put in a couple different things in this one commit.
Oh well.
1. New wording for how the user needs to figure out some checksums
for a recipe.
2. Fixed up some note placement in the wic reference section.
(From yocto-docs rev: 6c13f49c265c99ddd6dcd4ec3c3c8e66b78824e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #641]
Added a new bullet to the list that overviews what the manual
covers.
(From yocto-docs rev: 54bdb50df3951346a2e926700681db55bd59a2e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pulled a note about future support of commands and options from
the bootloader section and got it up in the higher level intro
section for that part of the manual.
(From yocto-docs rev: f8d677301abcd0d549ea9ad4cca79f43cb2db7f0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #641]
New chapter added that covers the YP instance of QEMU.
(From yocto-docs rev: 7ca17d02364af7e5924e23df6c138ab4dd2203d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on wrting a new recipe suggested using a "build-fail"
method to get bitbake to return exact checksums for code. It
was pointed out that this could be a middle-security risk and
that we should not do that but instead get the signatures from
the upstream website. However, many times those sites don't
provide that information. I re-worded the text to note the
ideal method (upstream checksums) and then resorted to the
"build-fail" method as a "way" to also get them when the upstream
location does not have them.
(From yocto-docs rev: b06699de2f512b01600bf952a8ee928c2a4c358a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some small edits to the section based on Tom Zanussi's
review.
(From yocto-docs rev: 560ea7b0eb131e59b190a34cadbe77729e76d61c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bogus link in there to the Build Appliance page.
I also noted many links that use the <ulink> tag that crossed
multiple lines. That is not good. I cleaned all that up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a39cea47cae29d7efb8e12495e8eefb484d464c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a set of fixes for miscellaneous dev-manual updates noticed
while transcribing wic help for the dev manual.
(From yocto-docs rev: fd2205e2778e2cef86561025fd904f303d64586a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--fsoptions support was recently added to wic, so document it.
(From yocto-docs rev: 91efb698eea438083474c1e905dbaad3fffdbd81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
squashfs support was recently added to wic, so document it.
(From yocto-docs rev: 22ca1141953b4fae92e15126da296d3d95e80c25)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new section discussing plugins, taken directly from the
corresponding wic help section.
(From yocto-docs rev: c1b4c378a496413f2dde8ad2f043a537cba24b6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6511]
Added a new example to this section that shows how to package
up binaries so that you can add them to an image.
(From yocto-docs rev: e52acc444c8f142d0469d7274fb936b5242306ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in a few links to member orgs, and update the BitBake link.
(From yocto-docs rev: 481c89e9b8e219358db8bfdfff0b5b0150247c07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe should be named "foo_1.3.0.bb" instead of
"foo_1.3.0-r0.bb".
(From yocto-docs rev: c34c3ea05d550fc85ab04036856704a7c04fd64c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the section on 'wic'. I have dropped in the same exact
section from the 1.5.3 (dora branch) release as a starting point
for Tom Zanussi to scrub and update for the master branch.
(From yocto-docs rev: e189992bff4249664ba959b1c440541e0b84e03d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note did not need to be there.
(From yocto-docs rev: 5ff94a1a412447c1ed1cda64e985b52545ccd9e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the ref-manual, I added a new variable description for the
PTEST_ENABLED variable.
In the dev-manual, I added a note to the "Adding ptest to Your
Build" section to mention that the OpenEmbedded system uses
PTEST_ENABLED to enable or disable building ptests and that
the user does not set this variable directly.
(From yocto-docs rev: 52d6608caaa25378b873e41e1ddd05356ff8629a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Updated each manual's CSS style sheet to contain a style for
how the permalink symbol looks on its own and how it looks
when a user hovers over it with the mouse.
(From yocto-docs rev: c8d4afa0b83a40ac2de0c47c191a11b3e7d241e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These types of references cannot span multiple lines. If they
do then mega-manual.sed will not process the link in the
mega-manual.html file.
(From yocto-docs rev: 8a06542c0f1fee503eda12052adddaaf9c94ca91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5566]
For the dev-manual, I created a new section called "Working
with Source Files." In the section, I cover how to set up mirrors
and also how to pre-fetch source using the bitbake -c fetchall
<target> command.
For the yocto-project-qs, I removed the mirror information in the
"Super User" section, which became redundant with the new section
now in the dev-manual. I also, removed the fetchall variation of
the bitbake command. Both areas reference into the new section of
the dev-manual now.
(From yocto-docs rev: f314061e3e752d35ea85ed16a60f7f9292180921)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
Some minor edits to the section. I found a grammar error and a
mis-wording.
(From yocto-docs rev: 86e85512279a1379d9b30825d6af3e508faa320a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I scrubbed the manual set for appropriate places to reference into the
do_clean* type tasks. Found and added several occurrences.
(From yocto-docs rev: 01594823b1d556bc70e928af1838039cc15a816d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6430]
The style sheets were carrying over old .PNG files that are not
part of the manuals. I have removed the statements that were
using them.
(From yocto-docs rev: 6e4fa419b9367ab5e34b9aa8010a24980416dc7d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Failure occurs during make, not do_compile as I previously
noted.
(From yocto-docs rev: 467ea8aa43fac14e3092a30ae15d1ace7a6558ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
Edits to the "Debugging Parallel Make Races" section. Changes
originating from trying the procedure.
(From yocto-docs rev: 537f5bd8918450e30ea87465025f0069232cb229)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
This is a section on parallel make race situations. The draft
is the first cut at the section.
(From yocto-docs rev: c225d7fe121270a6f82b9fbffa78c7e3914b113d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistency on how we refer to a task name throughout
the YP manual set. The proper way is "do_<taskname>". Some
occurrences did not include the "do_" prefix. These have been
fixed.
(From yocto-docs rev: b32821bb0d3e6de7bca68b25c662a023526a10c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit more to the ending of the sentence to qualify
its meaning.
(From yocto-docs rev: 40b309a43d948d5800cfe908e72f6202c095a166)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Received and implemented some feedback from Paul Eggleton
on this section. These were unsolicited observations.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 48ecc543d9f614b5258ab2573f0406aa3c778647)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I applied some review comments from Paul to tighten up this section.
(From yocto-docs rev: 9f17ad00e9e707fcd6f2419762b4281d64f4ed0f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new "Overrides" bullet item and fixed some minor issues
pointed out by Paul Eggleton.
(From yocto-docs rev: 44ff3d82985fa304c5641570fe72cf6a8ddabaa3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton sent me some feedback on this section. I implemented
his suggestions. Changes were minor. One included a cross-link
to the BitBake User Manual.
(From yocto-docs rev: e9b5f252a1368b8c231dd659428a18eacf9757af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I created a new section in the dev-manual titles
"Creating a Custom Template Configuration Directory" that describes
how the build system uses the template local.conf and bblayers.conf
and conf-notes.txt files as a basis when creating the real
deals in the build directory's conf folder. The context of this
is so that the user can create their own directory with their own
template files for repeated configurations and to create a custom
conf-notes.txt file should they want the setup scripts to display
some custom list of targets.
I also modified the two script references in the ref-manual for
oe-init-build-env and oe-init-build-env-memres. I needed to
link to the "how-to" section and added a bit in there about how
the scripts go about forming the conf files in the build directory.
(From yocto-docs rev: c07fb7082fe08387bbc546b2a23620dedc7127b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Writing a New Recipe" section has a subsection named
"Packaging." We needed a cross-reference here to the QA checks
performed for packaging.
(From yocto-docs rev: 34952ee1b56a84e0ee0edd142c7c8c68b122a3e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I applied some review edits as directed by Paul Eggleton. The
main feature was to merge the information on setting root
and extra user's passwords. Also, permanently removed the
reference to the wiki that showed the less optimal way of
setting a root password.
(From yocto-docs rev: fef0e17cd3835580abed175ef4a7baf22b9b7673)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
Applied extensive review edist from Paul Eggleton throughout
this section.
(From yocto-docs rev: aa0bcd9199c83b43bad2390ff2292a8c2abe7455)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I added some key references to the section on considerations
specific to the OpenEmbedded build system. In particular, I
provided some cross-linking back to the extrausers.bbclass
section to reference an example of adding a user account. I
also split out the topics of adding an extra user and setting
a password on the image in the bulleted list.
(From yocto-docs rev: 19dcd70b9b5aba1bd5e7ce090d5449afcef726bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
I did some significant re-writing and re-organization of this
section. It now includes a bit about securing an image in general,
provides general considerations, considerations specific to the
OpenEmbedded build system, pointers to some tools in meta-security
layer, and some other items.
(From yocto-docs rev: a900286992e781f451b3c180726965f5c7172bb9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of the new chapter that documents the 51 tasks
defined by the OpenEmbedded build system, the dev-manual had
many first-instance occurrences of do_* task names that could
be cross-referenced to the new sections. I have added these links.
(From yocto-docs rev: 78f91987b0ad9906571ec7888334301492361822)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6243]
This section addresses situations when working with recipe
file names of recipes that have not been released (e.g.
recipe-name_1.0.3.rc1). When the recipe is released the system
has difficulty recognizing the new recipe name as a later version.
So the work-around is to use PV to set the recipe version in
the recipe. The section describes this.
(From yocto-docs rev: 612379f44e772cfc381e31171ae18af24a9e44fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was using this term inconsistently. I have cleaned it up so
that no initial capital is used.
(From yocto-docs rev: 7dea2c5ef067d81b8350cd54ba4082c35d7077b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the release date to April 2014.
(From yocto-docs rev: 2592bc968edeea941a92e6bdd321dd872745b78c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
I worked with Stefan here to update the section on running tests.
We are good now with it all.
(From yocto-docs rev: 806a89f1ddd3efc39d15d3f7e1a01e8fd69af7c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created some sub-section structure to better organize this
section.
(From yocto-docs rev: 61b15f579c4c21378277051bb5905baa4e9741b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Information about setting up your own server. Paul
Eggleton provided the information.
(From yocto-docs rev: 655bba9b91283dac502658dd72d866a7af4eacce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
This is the section that describes how to enable tests for
actual hardware.
(From yocto-docs rev: fd33b19e7fa32797ab2abd2b506b0d63209fbfc6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
The list of items that described what happens when you run
tests is really specific to qemu. Consequently, it is better
located in the section describing how to enable and get
set up for those tests.
(From yocto-docs rev: 1f0606f1c5c03c873a295819adcfb6fb51c196bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
In the "Class Attributes" section I updated several items.
(From yocto-docs rev: 8f97671319c4751885e5ec89423a061dd45c6684)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the final bulleted item. Changed the wording on the
first to account for the manifest file.
(From yocto-docs rev: 50e7557032a0dbf4bc2144e9d4f9a4e1a1726d6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the (second) note about rm_work builds, that bug
was fixed. (#5072)
(From yocto-docs rev: f1223a67caae17db1abfd6b7465bfc71d295ab7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
Replaced a couple instances where routerstationpro was found. This
reference BSP is no longer there and has been replaced by
edgerouter.
(From yocto-docs rev: 7ba629cc677310f04a17636e140142695242c5d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
Several areas affected by the reference BSP "beagleboard"
being replaced by "beaglebone".
(From yocto-docs rev: 2f02b570e1ebcf0469871b67a029b65fa8b285f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some feedback from Belen and Paul for the section in
light of the 1.6 release.
(From yocto-docs rev: 88bbc526446970c66642c2ae10ad3eba01f74eb3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some links to the arichiver class. Also updated the example
to use the new ARCHIVER_MODE variable.
(From yocto-docs rev: 0774ddd2f83586c61f71f1b251fd559ccca45f50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
In the dev-manual, I located instances where a note about using
VIRTURAL-RUNTIME_initscripts = "" in the local.conf file would
be appropriate. Three areas updated.
In the ref-manual, I located the note in the systemd.bbclass
section and the variable descriptions for SYSTEM_AUTO_ENABLE,
SYSTEM_PACKAGES, and SYSTEMD_SERVICE.
(From yocto-docs rev: 57b0acf2f3f8159b635b42dcffa129f7d945eb81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3686]
In the dev-manual, I created a new section called
"Making Images More Secure." The section explains in general
how to enable the security flags.
In the ref-manual, I updated the CFLAGS variable to point to the
new section.
(From yocto-docs rev: 3ed91a46eaf5c1fdf84369ea69951775d87a42da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did not eliminate this variable but rather changed the description
to indicate that it has been deprecated and that the user should now
use a PR Service to do this stuff. There were several areas in the
YP manual set that used the variable in code. I just deleted those
lines from the code.
(From yocto-docs rev: 88a075e6306349e5f8c0d53b5288ef1e64956cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob no longer uses this layer so I removed the two instances in
the YP set where it appeared.
(From yocto-docs rev: 37e3f261bd61a96a2929a525f9896c39658d26f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1562]
In the dev-manual, I created a new section called "Using the
Error Reporting Tool" that describes how to use this feature.
The text was based on information I received from Andreea Proca.
In the ref-manual, I added a new variable entry for ERR_REPORT_DIR
in the glossary and a new report-error class in the class chapter.
(From yocto-docs rev: 70a5538fefcc1b77958fe4b2f29be00354f4137a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5442]
Updated the TMPDIR variable to call out the scenario where a user
might want to separtely set TMPDIR to a local drive and thus be
able to have the Build Directory on NFS.
Updated the "Build Directory" term with a note indicating that by
default, TMPDIR is inside the Build Directory and thus cannot be
on NFS. However, the user is able to by-pass that per setting
TMPDIR separately outside of the Build Directory.
(From yocto-docs rev: a5a308c512a3f4285bce16f17974dbf6b67432b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5766]
In the ref-manual, I added "Eclipse" use in the title for the
"Graphics Support" packages because the "xterm" package is required
for graphics support across all distributions.
In the dev-manual, I specifically called out the need for "xterm"
as a host package at the top of the section describing workflow
with Eclipse. I also updated the cross-reference links to the
host package and Linux distro requirements to point into the
ref-manual, which is more comprehensive, than into the QS.
(From yocto-docs rev: d3405be506fcb113f01d4fcba4631db80a1ed5dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4601]
Added a couple notes saying that you need to be in matching
branches for meta-intel and poky.
(From yocto-docs rev: 02bd63829b1d98f21183a10707753e9767bfe68e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more information based on an IRC conversation that
Richard Purdies saw on #yocto.
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: ec28d9f8f01a6e58ade2954e4e6f2ff1c11aa198)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2424]
Some imgage names were cleaned up to have more meaningful names.
These doc changes here take care of changing "core-image-basic"
to "core-image-full-cmdline".
Five instances changed.
(From yocto-docs rev: b758f9645e66867b5728da1dd989bae70a216fcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5406]
In the "Making Sure the Packaging is Done" section, I added the
Summary parameter the laundry list of parameters for the
do_split_packages list in the section. Paul Eggleton reviewed
the change and approved it.
(From yocto-docs rev: 4c4f60ee611921d9f0f835a081b449565382ab90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few minor edits.
(From yocto-docs rev: 6051ad964bda3ba78ea3a75199fda87133cc08fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits.
(From yocto-docs rev: 551127f3afa65f36bf9baf21d0ca3e53a2fbb3c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits. Needed to add a few cross-reference links.
(From yocto-docs rev: 47d7c408984a552a6c5d25ac880b50634c576cc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits here.
(From yocto-docs rev: f2d8dfa11af30699f912853814e3dce37b335d34)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits.
(From yocto-docs rev: 29b999f259bc9c87ad0b2e3c1d54f5473b66edbc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the way I referenced the read-only-rootfs feature. Since
it is something on the right side of a variable equation, I decided
to not render it in a Courier font. I have quoted it.
(From yocto-docs rev: 90804e71e43cddd3ac7c194a677acaab0c866ed6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mainly changed the way I referred to Systemd and SysVinit. I was
rendering them in a courier font, which was not correct.
(From yocto-docs rev: 179ae65ffdfcf59c36e4a3d315855d50722ad890)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I try not to use <class>.bbclass when referencing a class in
text unless specifically noting the .class file itself.
(From yocto-docs rev: 92c010a198b5c2e1da2ad979e6ca41cb7cd96e7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a reference to a class to conform to how it is done in the
books.
(From yocto-docs rev: df925b87e4b4962aca913677d8ea01b60b8f99dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mostly minor edits.
(From yocto-docs rev: 4076cf666a3161c5b816bdc56ff0a4edca5ada32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits. Created some links at the top for organizational
purposes. Clarified what the linux yocto Git repositories are.
(From yocto-docs rev: adbb8ecb0bce5775153d43bec4b70b2439bc8846)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eliminated the redundant [required] and [optional] side-notes
for some variables.
Minor fix to re-word use of "append files".
(From yocto-docs rev: 9db7059c9b95871cf876d6d75f8377de943bff85)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit about the layer creation in the patching the kernel
section. The example does it by hand and now you could obviously
use the yocto-layer create script. I made a note of saying the
example does it by hand.
Also, in the menuconfig example. I updated the kernel version from
3.4 to 3.14. It was very old.
(From yocto-docs rev: 2696d4e45bccbb910c3d721e3f1d46d48309ee6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to "Adding a New Machine" and "Working With Libraries".
Minor corrections.
I did do a significant rewrite of the first two sections of the
"Adding a New Machine" section as it was very poor.
(From yocto-docs rev: 0a030e44f0f1bf2bb204f24b63b4ddfc0cde8252)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits.
(From yocto-docs rev: 8e0de3f767af4b2ca182d9f321bd3c8286773913)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor items fixed.
(From yocto-docs rev: a57772d157a3340d6ae707990d6076e344e15c75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits applied.
(From yocto-docs rev: 1897997ad3ef3ada76de77c7fb886fb624dcdfdb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several items taken care of here. Of note are the retiring
of three BSPs (Chief River, N450, and sys9* stuff).
Also of note is that Kepler recommended version is now 4.3.2 and
not 4.3. The interface changed a bit as well in the section
for installing that stuff.
(From yocto-docs rev: 61bf82c1e68156d32a81e4c76dbb29db14665ffb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes are a result of a detailed read-through prior to
releasing YP 1.6. The changes are varied and random.
(From yocto-docs rev: 04c09abf96a04c3ffeea8cdf7be8e1bb1b9055c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure had a wrong box label in the right-bottom box.
I changed it to be like a local Git repository area as it should
be.
(From yocto-docs rev: 2963152decb2d3983180a0af9896e822c865f5cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did a read-through of this chapter in preparation for the YP
1.6 release. Found several little areas that needed attention.
(From yocto-docs rev: 73d56a4c948c675afd4cde0e3321a944a02013cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to add a cross-reference anchor tag to the term in Chapter
3 and then the link itself.
(From yocto-docs rev: 227c8ce85f4a8e81f14582cdc7c54b5b832d3aa0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed a few things as part of the read through prior to the
1.6 release. In particular, I added the link for the BitBake
User Manual, which is now published alongside the YP manuals.
(From yocto-docs rev: af779a5a70790d9c15584e1a463e1f0a5c79987f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5857]
I had missed replacing the release date in the manual revision
history tables for the 1.5.1 release. It was still an estimate.
I have replaced with the actual date of "January 2014"
(From yocto-docs rev: fb9abe0df33a9b551d797ac1b72577931f5f8ce6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5814]
I placed a brief note in the section where it talks about adding
a project to an Eclipse project that states you can't use special
characters in the project name.
(From yocto-docs rev: a03b5849394a6ca3a787b444d95fa49b9db36dd5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an incorrect wrapping of code in the source
example.
Reported-by: Ross Burton <ross.burton@intel.com>
(From yocto-docs rev: 478c3bba9e4b1b72dd11b58ebf9eb7ed54e80081)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the description to match that which is used in the
WORKDIR variable.
(From yocto-docs rev: 7d9071c2bb99e7c3f3eeae9ddf0abc34563c6725)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording as it is described in the "Writing a New Recipe"
section.
(From yocto-docs rev: 88b039ccd0aa825220de091ea7225ada3d212553)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Final review comments from Paul Eggleton implemented here.
This should be it for the new section.
(From yocto-docs rev: 5307b471c73f46103e0a031172df3174c1880806)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are Paul Eggleton's fourth review change.
(From yocto-docs rev: 8470c1b516f7799148b4e2eae28534730e93b58b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed applying the revision comments from Paul Eggleton
for the third revision of this new section.
(From yocto-docs rev: d641aa6318cb87e9d41dda39cc4747c44888aa4d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented some third review feedback from Paul Eggleton.
(From yocto-docs rev: 3fd9c3cc4cf2aba876f0ad2ab36660ec32ea4c08)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to these sections, which are part of the
"Writing a New Recipe" section. Moved the Post-installation section
out of the examples area into its own, higher-level section as
it was not really an example. Other edits were direct result of
Paul Eggleton's review.
(From yocto-docs rev: c147a8bedf79d0be42d7b338e10b7e42d7c0b080)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to this section, which
is a part of the "Writing a New Recipe" section. Very minor
fix to remove a sentence that was somewhat isolated and unecessary.
(From yocto-docs rev: fd2a0eac1bc4b9e6af0bc8ce9a30802dbea35873)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some self-edits to this section that is part of the
"Writing a New Recipe" section. There was no feedback from the
second review but I noticed a few issues. Also, I added that
reference on how to add a post-installation script from the
"Enabling System Services" section as noted by Paul Eggleton.
(From yocto-docs rev: 6be835637cb1dc232d6d6dd1dfe1bc803efecfd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to the section that is
part of the "Writing a New Recipe" section. I changed the title
of the section and applied some rewordings to better reprepresent
exactly what sysvinit and systemd really are (managers).
(From yocto-docs rev: 95c3ed5b7d1ace08828baacc8401e1ea5d96a06e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to this section that is
part of the new "Writing a New Recipe" section. Minor edits.
(From yocto-docs rev: a5116900ca42377c3dc19433b2f6046828ad2dcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added review comments to the section inside the new "Writing
a New Recipe" section. Minor word fixes. I did add a new
common compilation failure scenario. All input from Paul
Eggleton.
(From yocto-docs rev: 5818a8882ff55fc27c5dc77233854465b8c2245b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review edits from Paul Eggleton for this section that is
part of the "Writing a New Recipe" section. Minor wording issues
only.
(From yocto-docs rev: 8e291826fcb9547c3fc16aa81ccf6867fe2e417d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to this section per Paul Eggleton.
Minor word changes.
(From yocto-docs rev: 5130559003778e3b613d3d480350d041dfd10fcd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to this section.
(From yocto-docs rev: f4075f61ca081df6c87abd876207da968450a8f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to this section. Specifically, I addressed
the organization and got rid of the bullet list. I integrated this
information into the examples used for the various SRC_URI snippits.
Also, part of the feedback including separating out the patching
information into an isolated section. I set up the section and
moved minimal information into it.
(From yocto-docs rev: 0a16977c2125402cdd04e24ad5bce074859eb28a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrective edits to this section based on Paul's feedback. Several
items addressed.
(From yocto-docs rev: a09ebe38e0ad22ad4ab12eab3d5a73166e4c56f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-ordered this such that the storage of the recipe comes first
and that is followed by naming it. Also, formatted into a list
to give a better sense of the suggested order.
(From yocto-docs rev: aead82f034a097cbdfe38b3b1f09a60cc411d6ea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the introductory paragraph to be more general about where
a user might locate an existing recipe as a base.
(From yocto-docs rev: d6147d19785824cde29e82aa32916dcec5ae2276)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the note structure for the information about BitBake
parcing curly braces. The note was to prominent. I added a
leading sentence to better integrate the information into the
section.
(From yocto-docs rev: 21dd7ceced2c9867e4fefc2aab81a4ab3da3bc7d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some confusion to this section as to just when post-install
scripts were being executed. I looked it over and the section really
is focusing more on the situations when you are creating a read-only
root filesystem. So I went through and did a small amount of
editing to just clean up some loose text.
(From yocto-docs rev: 1b3674a5d123e74748bce5de61722079d4740908)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LIC_FILES_CHKSUM was out of date due to a merge in poky.
I updated the single instance in the manual set to use the new
hash.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 4cfdf391326f2c5750404a8d7f31999f75bc26fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You really are not compiling the recipe.
(From yocto-docs rev: 82ca9176375c34f3c5b6694b0f205794684a2f01)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented this out based on Paul Eggleton's suggestion that
we should not be presenting this information.
(From yocto-docs rev: fe2ee21e42134f0ffc9347f8c0336169f8f52aa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merged the concepts in the old "Adding a Package to your Software"
section into the new "Writing a New Recipe" section. This completes
the feedback from Paul, which was extensive for this new section.
(From yocto-docs rev: 522673e1aa068b8d089dfefb5b234a48062da3fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change merged in the Hello World section as a summarizing
example section to the new "Writing a New Recipe" section.
(From yocto-docs rev: 79c858e1590e5ab4c56b19dc51b03e0e570b6209)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involved a first draft and implementation of Paul's review
comments. Also worked on the "Configuration" section.
(From yocto-docs rev: 0e168dbaf5f4949c4c5f79fe7da406ca91390e22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the recipe creation figure. I had to re-order the flow
and also generalize the supporting services installation part of the
diagram.
Fleshed out the "Fecthing" section with SRC_URI examples and much
more detail.
(From yocto-docs rev: 6a23ab2beb90376c11c426ac8bf5618994585a9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added some stuff to the section on fetching source in the
new "Writing a Recipe" section.
(From yocto-docs rev: a4b340d58888927bf648be34402670f8a7d87d8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This draft has the structure with text from Paul's email. It
needs further work.
(From yocto-docs rev: 08025edc34995f7436786e9ed3abdfa155db47af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: c031c014bae6d6e4a239a4bcd1e8b9d5d272f851)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Created a new figure for the flow. This involved putting the figure
into the "Figures" directory of both the dev-manual and the mega-manual
and then updating Makefile to include the figure in the TARBALL
variable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a link to the PRSERV_HOST variable. That variable is
now defined in the ref-manual variable glossary.
(From yocto-docs rev: 7166fe94107cd379081fd81b7351ec081aa2c6ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As an actual example of using AUTOREV, refer the reader to the
Yocto-supplied poky-bleeding distribution.
Also cleaned up some wording and added a Caution statement
about the distro not being regularly tested - Scott
(From yocto-docs rev: 2a74573af702c905274e377304a946fd335a0182)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
i'm still looking at the dev manual for more changes but those would
be more substantive changes, so i'll pass along just this collection
of minor stuff.
(From yocto-docs rev: 94e2422d6e6e408e2dd76b15e1231814b123800d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This now involves only making sure that "packag-management" is not
part of your IMAGE_FEATURES statement for the image.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9cb66c40677adc43088d22900fef58166ee8b508)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the intro text for this one-line example so that it
would not imply that the example is the only syntax that can
get the job done.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 5d0151b692bef9ef67a6237f3e4e4387e6f00c63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a small note in the section where you create your own
distribution to be clear about where the name is set.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a2ce7d82eb7f3edbaebce65c73e6ae3c0c921152)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than saying menuconfig is "built", I changed the text to say
it is "run."
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 74b7a193e8356931e5a0db2ea76b4543880ed2ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The four sub-sections describing how to customize an image seemed
to be backwards as they progressed from most complex to easiest.
I switched up the order and provided better transitional
introductory wording for the four sub-sections.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1e8d178c401d3020621fc90af5cdd0bb3e37be87)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I noticed that chapter 10 of the ref-manual still had
"Reference: Features" as the title. This is left over from way
back. I changed that chapter title to "Features." Next, I
noticed an inconsistency with some sub-section titles.
I changed the "Images" title into "Image Features." This affected
several links across the doc set so I had to update those
cross-references as well so they have the latest section title
as part of the reference.
(From yocto-docs rev: b68f009a92e0e24802e367d98cf66e15ba1cd364)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The operator used was "=" which was inconsistent in light of
previous uses of the variable in the ptest section. I changed the
operator to "+=" to be consistent.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d6b7c7e15290e64f4baac25544224788e92ad309)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After adding "Package Group" definition as the original "Task"
definition, we needed to create a new definition for the term
"Task".
(From yocto-docs rev: b6eae9242bf488d3f086e496b52d8422ad31feb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: faa7206b2f67a26c1366fe997cd092aed7e9f85e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the note indicating that three specific recipes were
"ptest-enabled" for the release. I substituted in wording that
tells the user to see if a a recipe inherits ptest as a way
of determining if the receipe is ptest-enabled.
(From yocto-docs rev: 9136617575eb7a0a08f0b81f75ae6cdede62219f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording so that it reflects better what is actually
going on when use IMAGE_INSTALL to afect an image.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 243588460fb76a0c333772e3dce566cf664397ee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Claudius Heine
Robert P. J. Day
Pascal Bach
Tom Zanussi
Robert P. J. Day