The coreutils added to RDEPENDS was for tail command which is everywhere
on the build host, so only add it to target. There was a side effect if
coreutils-native was build, when its commands install to sysroots, they
would be removed during rebuild, and cause other recipes fail to build:
/path/to/tmp/sysroots/x86_64-linux/usr/bin/mkdir -p lib/sys
make: /path/to/tmp/sysroots/x86_64-linux/usr/bin/mkdir: Command not found
(From OE-Core rev: 4a0e3ca3733e2b6f3f20065421dbb9da2058014c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The group shutdown had been provided by base-passwd, otherwise, it may cause
sysvinit failed to build:
$ bitbake xuser-account sysvinit && bitbake xuser-account sysvinit -ccleansstate && bitbake sysvinit
[snip]
| chown: invalid user: root.shutdown
[snip]
(From OE-Core rev: d72793ca3cbedca3eaca2a7c62f4c93d3c3af358)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These libraries are used in some recipes outside oe-core, so we should add
this class support to avoid duplication and bbappends on other layers.
(From OE-Core rev: 2db2724c4386fc07bd667060eb12b479747e0d35)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -I= and -L= is used for cross compile, target doesn't need, and
binconfig.class can handle usr/bin/crossscripts/tclConfig.sh.
Fix do_configure error for the recipe which uses tclConfig.sh, for
example, postgresql.do_configure:
configure: error: header file <tcl.h> is required for Tcl
(From OE-Core rev: c6f24481b2fc965eeebca5508d68f1b9e5b3f212)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gethostip comes from syslinux. It seems odd to depend on a bootloader
to clone a git repository.
Switch to using getent from the c-library, which should be available
on every system.
We now also support the case where a hostname resolves to more than
one IP address.
(From OE-Core rev: c91dbf3ca2faec95195c85b65aa6cab7de9bca2c)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
configure-fix-with-without-selinux.patch is removed as it has been merged.
(From OE-Core rev: c28379fbe62b75a3156bef4d9191fc69155a6297)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xsettings-client is not meant to be a shared library and the only
user in oe-core (libmatchbox) now has an in-tree copy.
(From OE-Core rev: ed5cbf977dca8f3d85c8d933071c6e49fb4bd95f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libmatchbox now has a in-tree xsettings-client.
* Use git SRC_URI like the other matchbox components.
* Remove upstreamed patch.
* Update license info (xsettings code is MIT).
* Stop depending on libxsettings-client
(From OE-Core rev: f28b0359c9e993233d5985e27152dc5cb4fbfd13)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New release finishes the port from buggy ScalingImage to
ScalingImage2.
(From OE-Core rev: cb476bac7306f45c14d5c6c4c5d8351e5582ee40)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1.6.22 -> 1.6.23
License files changes are due to updates in Copyright date and Version
(From OE-Core rev: 83a43b1bd124b6306e0f852ad3961f4672fbc7dd)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to revision cccb6a0da9
(From OE-Core rev: 418a0ebb318b32068a26addc4846e9c3aa2a044d)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This issue is also reported here
https://trac.macports.org/ticket/51709
Patch is also from same ticket
(From OE-Core rev: 119ff60101ed6fd542f1280d37a24411d8b14264)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bmap-tools-native is required to generate .bmap file. Without it
wic fails with this error when run with --bmap option:
Error: A native program bmaptool required to build
the image was not found
Added bmap-tools-native to the list of requirements to build
in Wic.setUpLocal method.
(From OE-Core rev: dd11ab551f9bf1d8761d0430f19510a9caa53a12)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bobby Bingham (2):
remove or1k version of sem.h
remove obsolete gitignore rules
Rich Felker (4):
remove obsolete and unused gethostbyaddr implementation
fix asctime day/month names not to vary by locale
fix regression in tcsetattr on all mips archs
revert unrelated change that slipped into last commit
(From OE-Core rev: 681b75cb7c1ad88774d611119c9a7f6d076ff2c5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As exposed by WebKit on aarch64 hosts, which causes binutils to throw an
internal error.
[ YOCTO #9509 ]
(From OE-Core rev: b31294e4f34dfb530c40526ab56c07aedb76e31b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to set these as the restore from sstate will create the
directories as required.
(From OE-Core rev: 3ab3ebc06d22f0776091e39237235ea50c4503b2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The nativesdk libc when used by buildtools has a hard requirement on supporting
a UTF-8 locale because Python 3 needs a UTF-8 locale. However we currently only
ship the C locale, which means that Python attempts to lookup the user's locale
(for example, en_NZ.UTF-8) in the locale archive under it's prefix it fails and
falls back to C. This the results in Python using ASCII instead of UTF-8 for
file encoding, and bitbake breaks.
Th obvious solution would be to ship all locales, but this would add
approximately 250MB to the size of the buildtools tarball (which is currently
around 30MB). Generating a binary locale archive reduces this down to 100MB,
but this is still a drastic increase in footprint. If we ship a subset of
locales in the tarball then there will be users whose locale isn't in the
tarball, and they'll have to change their locale to an "approved" one, which
isn't the best of messages to send to new users.
The alternative is to tell the nativesdk libc that the locale archive isn't
under it own prefix but is in fact at /usr/lib/locale/locale-archive, so the
buildtools libc uses the host locale archive. The locale archive format appears
to be at least fairly stable: our glibc 2.24 can read the locale archive
generated by glibc 2.17 (Centos 7).
[ YOCTO #9775 ]
(From OE-Core rev: 75321b6b0f2c0ac667b9350b387b01a188e195c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport patch to fix CVE-2016-2381 from perl upstream:
http://perl5.git.perl.org/perl.git/commitdiff/ae37b791a73a9e78dedb89fb2429d2628cf58076
(From OE-Core rev: 07ca8a0131f43e9cc2f720e1cdbcb7ba7c074886)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bug fix release to address two regressions:
* Fix build breakage when using configure option --enable-sha256
* Do not remove packages if removal operation is not valid due to
installed dependents
(From OE-Core rev: 9219e87c6add5bcc95ac00a019a6c24083846f50)
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
(From OE-Core rev: fa550fcb9333d59b28fc0e4aebde888831410f5c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides us with the information we need to remove the original
version recipe and associated files when running "devtool finish" after
"devtool upgrade".
(From OE-Core rev: 92eb42c347af919cd9f8739515fdf806c12b5ba8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will be called by "devtool finish" to allow it to update the recipe
or create the bbappend depending on the destination.
(From OE-Core rev: 5067cdc73483b53d46d9bf584723e41957c7ec54)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will be called by "devtool finish" to allow it to reset the recipe
at the end.
(From OE-Core rev: b8d398516556eaf97679e28ad58448f570984b52)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Allow the function to be called with the base layer path (in which
case it will just return the same path)
* Ensure that the function doesn't recurse indefinitely if it's called
on a file that's not inside a layer
* Correct the doc comment for accuracy
(From OE-Core rev: 912026d85c2f535be2f60c45979162ea25c7f356)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there are files in the oe-local-files directory which are identical
to the original version, then we shouldn't be copying them to the
destination layer. This is particularly important when using the -a
option to create a bbappend.
(From OE-Core rev: 9230bfcc839eb35630949f0a8ed058ca1fa944b1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool update-recipe was defaulting to the ${BPN} named directory when
adding patches next to a recipe, but that meant if you already had files
in a ${BP} named directory (i.e. name and version) or "files" then you'd
end up with two directories next to the recipe, which is usually not
what you want. To avoid this, look through FILESPATH and take the first
one that's the same level or one level down from the recipe and already
exists, if any.
(From OE-Core rev: c7a8190cf8bdf86ba850b6780b8e951e90232c06)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If security_flags.inc is included then bash 3.2.48 fails to build:
| ../bash-3.2.48/print_cmd.c:1152:3: error: format not a string literal and no format arguments [-Werror=format-security]
| cprintf (indentation_string);
Backport a patch from upstream to solve this.
(From OE-Core rev: 293d90d757d0d1e292c90cb0e9c576faf911ffcc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new supposedly superior subpixel hinting mode was added and made
default in 2.6.4 but 2.6.5 reverts the default to "no hinting".
License checksum changes because of a copyright symbol change.
(From OE-Core rev: 1494f9163ee4f866f9ccb6347038bf3ec205dfe3)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License unchanged, just moved by a few lines.
(From OE-Core rev: 10bbf6ac62803eb625ccba8b3225d818707120ec)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This overwrites the regex set by upstream-version-is-even.bbclass.
(From OE-Core rev: 6660b9958aea5e71e992dcc238b6d84667513d2e)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove a patch that is no longer needed.
License checksum changes because of a copyright year change.
(From OE-Core rev: 911510181ac933d5d1fc7d88890eb67d5d338acf)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove backported patch
* Update dependencies to use python3 modules, add depencies added
in the new version
* Install only stripped binaries to keep size down
* Fix bash-completion install location
(From OE-Core rev: f7193a306cfc3ac0a3fdcf891716a59f5b8178e8)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During a parallel build it's possible for unrelated shlib files to be removed if
the recipe they came from is about to be rebuilt. They can't be involved in the
dependency chains as otherwise they wouldn't be removed, so just silently handle
files disappearing.
[ YOCTO #8555 ]
(From OE-Core rev: 1e355da3fda742c78d99ddd2ee5caa9df52f92e1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was simply changing prefix will relocate everything which is generally the
intention, whilst still allowing the variables to be set independently.
(From OE-Core rev: 2676ee77bacde03e75c2ceccfdc4c28a684569e6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ability to specify extra_bootargs (kernel cmdline) in order to enable systemd
debug log in images that enables systemd init.
[YOCTO #9299]
(From OE-Core rev: 09d62551c289b5607341a4f9c46eecd6390ad774)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we do not cache is then configure in distcc will try
to compute it using AC_TRY_RUN which will give some result
on x86-64 host when target is x86-64 but it generally is wrong
for cross compilation. We therefore cache it for all linux
targets.
This issue is highlighted by clang when compiling distcc
where it figures that its cross compiling and therefore triggers
it to include its own implementation of snprintf() which does
not go well with clang, gcc compiles it fine thats why we
never saw the problem thus far.
(From OE-Core rev: e940dfcb5ad4017e5fe616c583253439603656db)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a patch to disable a clang specific warning
and avoid passing clang options to gcc when we have
cross compiler is clang but host compiler is gcc
We do not need to use target cflags when building
native pieces and hence avoid the inter-mixing of
compiler options
(From OE-Core rev: d13640f39f8f467597daa42774102329e82d9b68)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armin Kuster
Robert Yang
Khem Raj
Felipe F. Tonello
André Draszik
Chen Qi
Jussi Kukkonen
Maxin B. John
Ed Bartosh
Ross Burton
Kai Kang
Alejandro del Castillo
Paul Eggleton
Aníbal Limón