oe.path.realpath() provides are common and more correct implementation
for resolving symlinks within sysroot. Use it.
Old implementation suffered from lot of problems; e.g.
* redundant code
* calls 'os.stat()' which references files on host; this can give wrong
results about existing/non-existing and can cause EPERM (instead of
the catched ENONENT) exceptions
* does not deal with special cases like '..' leaving the sysroot.
(From OE-Core rev: ec2aab09769f4b6817d74d2175afa2b7c7598750)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe.path.realpath() provides are common and more correct implementation
for resolving symlinks within sysroot. Use it.
(From OE-Core rev: 2fa5cc0d08e855e24a4497601d7cc73b9f2aa550)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need the update-rc.d class to work when systemd is being used so that
packages that only have SysV init scripts still work. However if a recipe
supports both we don't want to install SysV and systemd files under systemd.
To solve this, before doing real work in update-rc.d check if the systemd class
has been inherited and don't do anything if it has.
(From OE-Core rev: 0273a22fec3c9360df2510b759c5bf9af610551f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class adds postinst/prerm scripts to start/stop/enable/disable the services
as relevant, and some magic to ensure the service files are installed.
Based on (but not the same as) the systemd.bbclass in meta-systemd, so thanks to
the following for their work there:
Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Khem Raj <raj.khem@gmail.com>
Martin Jansa <Martin.Jansa@gmail.com>
Andreas Müller <schnitzeltony@googlemail.com>
Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: f4bf51612f8be1d3dd340fc456f3fa08fcfa34ef)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add RPROVIDES, RREPLACES, RCONFLICTS and RSUGGESTS to the list of
tracked variables. Of these, RPROVIDES is always output, whereas the
others are only output if they have a value (since it is more common
that they don't).
Implements [YOCTO #3391].
(From OE-Core rev: 564d76bed7b96d381d6438df81c0d5b4f5a7b2b0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ CQID: WIND00392947 ]
It is not good user experience that the self-extracting archive (.sh file)
has no execution permission by default.
(From OE-Core rev: 3d6537f6ab1ce98075461b9a5d49885c2454417f)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was just wrong - when systemd is being used there'll still be packages that
use SysV-style init scripts, which systemd supports fine.
This reverts commit b94227f729.
(From OE-Core rev: 3f50b61c77406f87d36437cca53573f86f314641)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe_runmake() tried to set MAKE a second time, remove it since this is
(nowadays?) redundant WRT the normal export MAKE= in the generated
scripts.
(From OE-Core rev: b9c83b22b555349314191ba60346b01a9252a812)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu user binaries sometimes segfault when running them through pseudo.
So, set PSEUDO_UNLOAD to 1 before running any qemu binary.
[YOCTO #3788]
(From OE-Core rev: 688e9485980de0f29aa00e24ce53a3efd3a3a7cc)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example with a lib32 multilib, we need to still use the 64 bit
qemu binary in case we do encounter a 64 bit binary.
(From OE-Core rev: e8ec13a26217bf473504ae4aab22b134dd9dffff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add MLPREFIX to DEPENDS to ensure the correct qemuwrapper is dependended upon. Its searched
for in PATH so we need to do this to ensure the correct version is present.
(From OE-Core rev: 41163fc5e6662251ec264fd5194a649342d11de1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Load environment variables like DISPLAY from BB_ORIGENV after recent
bitbake changes.
(From OE-Core rev: 8ad8b34b5ac36d805bb10c120f3388e7dce83b98)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After rewrite of split_and_strip_files src var is no longer
available here where it is used so we should replace it with
a valid value
(From OE-Core rev: b07e79ea049d341a5a0a7e4bb72151f49336c5bc)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This needs to run before PKGR and other variables using PRAUTO are used,
including the expansion optimisations.
(From OE-Core rev: eb09ebc9680eb50e23778dcc1c2697d13cf073ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sometimes it's useful to do something with packages created
by do_split_packages later in do_package_prepend, e.g. in:
http://lists.linuxtogo.org/pipermail/openembedded-devel/2013-February/043824.html
I have .bbclass which adds some postinst, postrm and RDEPENDS,
but ttf-mplus is using do_split_packages to create those packages
(From OE-Core rev: 5aa52c6882d2929b2e530c4fa297c6d3e97d4f9f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add headers to document the different phases of do_package and
make the steps clearer.
(From OE-Core rev: b6438c94035a014902ec89af63ff3787cd8c67f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prepending to populate_packages is rather ugly and means its hard to trace
errors and also profiling informaiton is summed together in one function.
This patch starts to split out the prepends to become separate functions
to avoid these issues. This is generally a neater way to write functions
than prepending to where there can sometimes be variable scope issues
and we've been bitten by whitespace issues in the past.
(From OE-Core rev: 4f9963d1d82ee896fe9491d6a8b32be42cd06f14)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than an exec() per directory, we might as well exec one command and
be done with it.
(From OE-Core rev: 82ae9cfb09ee5c0aa6402c972d71e2b64d1ce8bc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Call getVar outside the loop
* Drop unneeded PATH export (bitbake does this already)
* Drop unused variable
* Simplify if statement nesting
* Simplify variable expandion to a getVar call (expand would just call getVar)
(From OE-Core rev: 52b506145bcddc133ca93a8c9f7343de69d10907)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can use the cleandirs and dirs flags for the fuctions to handle
directory cleaning and creation at the bitbake level rather than
using these calls within the functions
(From OE-Core rev: 4b31d6f6f0a2a6b9e504ffae0d3b2099cbd7dddc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small performance tweaks for populate_packages_prepend:
* Compile the regexps once at the start
* Don't keep importing a module which is already imported
* No need to check PKG is set, we'd have failed long before now if it wasn't
* Don't export PATH, bitbake takes care of this at the task level
(From OE-Core rev: e9d43d7b4d2cfb22b21f3814c2401a699c78b025)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The split_and_strip_files funciton was hard to follow and its usage of prefixes
to strings was unusual. This rewrites it to use a list of hardlinks, symlinks and
elffiles where each list is iterated over at the correct point.
This means we can avoid creating dandling symlinks for example so we can simply
delete the cleanup code for this.
The isfile() check is also removed which gives a significant improvement in speed.
Its uneeded since os.walk will have already checked things in files are files.
(From OE-Core rev: 0cd295d8cdc8cc39d6b6c7d26ea8a2a10a979d7c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are in bb.utils so lets the correct function and avoid the overhead
of the fixup/warning for the deprecated usage.
(From OE-Core rev: d17329db4842c50af1a3d7f5f20e692c89913fba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data store copy and overrides is overkill given the small number
of accesses that are being made. This simplifies the code.
(From OE-Core rev: 72c1fd72d3b479c728e249eaa763116d352e945b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We might as well put all the sanity checks in one place.
(From OE-Core rev: 05be11c7508984cc4aa757becb7a8f47c5b7e919)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check through the variables:
'RDEPENDS', 'RRECOMMENDS', 'FILES', 'pkg_preinst', 'pkg_postinst', 'pkg_prerm', 'pkg_postrm'
and if there is a variable set which isn't package specific, inform the user
of this.
Using these variables without a package suffix is bad practise and complicates
dependencies of packages unnecessarily as well as complicates the code. Lets
convert the remaining issues and then we can take the small performance gain.
(From OE-Core rev: 316228948e65f376f6c5be13ccd0c964ea630edf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PATH is already exported, we don't need to do this each time we run
something, its just noise and overhead.
(From OE-Core rev: 060f617cea4ea0a5af28d31ea19c0387e9773fce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This directory is cleaned upon completion however if a previous build
crashes, it can lead to corrpution, hence ensure its clean at the start
too.
(From OE-Core rev: 8ef0e59d5a7da3671d1ad9a54fe068ed78f928d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a function which copys a tree as a set of hardlinks to the original
files, then use this in sstate to reduce some of the overhead of sstate
package creation since the file isn't actually copied.
(From OE-Core rev: 8e373e69acac853213a62afb8bbdf0adc0c5045a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Comment the "set -x" lines since these will add a lot of extra, not
always necessary, debug messages in the log.do_rootfs.
[YOCTO #2599]
(From OE-Core rev: 5d8119f3d749073e355351e0e15f2703fad738f2)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When qemu bbclass is inherited from a recipe that is not architecture
dependent, qemu_run_binary will return "qemu-allarch". However this
binary does not exist. Instead, return "qemuwrapper" which will, in
turn, execute the right binary for the target the image was built for.
[YOCTO #2599]
(From OE-Core rev: 149a564bba7d3e1c2054ae6d908835ebd95b9084)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All font packages should inherit this class in order to generate the
proper postinst/postrm scriptlets.
The scriptlets will actually create a host intercept hook that will be
executed at the end, at do_rootfs time, after all packages have been
installed. This is good when there are many font packages.
[YOCTO #2923]
(From OE-Core rev: 0c12f7fb3c2c42e5b633682bb1277b943ac19ea6)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's not recommended to change this value, because it breaks upgrade path on target
(all old u-a alternatives are forgot in old OPKGLIBDIR value
* but make it consistent, so if someone really want to change that, then
setting OPKGLIBDIR_distro in distro.conf would be enough
* without this there were at least 4 places to change:
rootfs_ipk: opkglibdir variable (notice that I've removed /opkg from it to correspond
with EXTRA_OECONF option used in opkg recipes
package_ipk: ${target_rootfs}${localstatedir}/lib/opkg/ hardcoded in
package_install_internal_ipk
opkg-collateral: value in lists file
opkg: EXTRA_OECONF for all 3 classes, FILES_libopkg, do_install
* validated with buildhistory that without OPKGLIBDIR explicitly set the
output is the same and that after setting
OPKGLIBDIR_forcevariable := "${libdir}"
everything including empty directory from package_ipk is moved to
libdir
(From OE-Core rev: cf0aa9c4fdae8855803e96b1922d54a2431795d3)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing check for SKIP_FILEDEPS can be overridden per recipe
using SKIP_FILEDEPS_pn-${PN}. However, there's no mechanism for
letting a single package within a recipe use SKIP_FILEDEPS.
This patch adds SKIP_FILEDEPS_<pkg>, by analogy to FILES_<pkg>.
Note that it only works one way; if the recipe has SKIP_FILEDEPS = 1,
the checks for individual packages will never be reached.
(From OE-Core rev: 94557b500ad38a49aec40629015ed0b24e167f76)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support configurations where active development is not being done within
the oe/bitbake build environment and restricted bandwidth situations, this
commit allows the SRC_URI to point to a kernel tgz instead of a full git
repository.
Outside of the upstream tgz instead of a kernel git repository, the
restrictions, config and patch process is the same as any linux-yocto-custom
recipe.
An example linux-yocto-custom based recipe would have a configuration like
this to build the 3.7 kernel, using an externally supplied config, from the
3.7 tgz:
SRC_URI = "http://kernel.org/pub/linux/kernel/v3.0/linux-3.7.tar.bz2"
PV = "3.7"
S = "${WORKDIR}/linux-3.7"
SRC_URI[md5sum] = "5323f3faadd051e83af605a63be5ea2e"
SRC_URI[sha256sum] = "dc08d87a579fe2918362e6666e503a95a76296419195cb499aa9dd4dbe171a9e"
[YOCTO #2686]
(From OE-Core rev: 08b3a282ce75a9972694f0c4379179505b9ec91f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To promote the reuse and sharing of configuration fragments this change
allows any kernel-yocto based recipe to have multiple alternate git repositories
which provide kernel feature directory trees listed on the SRC_URI.
These feature directories are in addition to any in-tree kernel meta data branches
that may be available (described via the KMETA variable in linux-yocto recipes).
Features found within these directories can be used from recipes via the
KERNEL_FEATURES variable. Features found within a feature directory are free
to include any other features that are available in any directories. In both
cases the path to a feature description (a .scc file) is relative to the
root of a given feature directory (which is how existing .scc files work)
The search order for features is determined by the order that repositories
appear on the SRC_URI.
Normal SRC_URI rules apply to any repository that is added as a kernel
feature container. A SRCREV must be supplied and it must be unpacked to
a unique directory, which is controlled via the "destsuffic" url parameter.
In addition to these standard requirements, any kernel feature repository
reference should identify itself via the "type=kmeta" url parameter. If
type=kmeta is not supplied, the repository will not be processed for
kernel features.
As an example, the following in a linux-yocto bbappend makes two additional
feature directories available to KERNEL_FEATURES and fragments.
SRC_URI += "git://git.yoctoproject.org/yocto-kernel-cache;protocol=git;branch=master;type=kmeta;name=feat1;destsuffix=kernel-cache/"
SRC_URI += "git://${KSRC_linux_yocto_3_4};protocol=file;branch=meta;name=feat2;type=kmeta;destsuffix=kernel-features-experimental/"
SRCREV_feat1 = "${AUTOREV}"
SRCREV_feat2 = "${AUTOREV}"
(From OE-Core rev: 02ad603a104b70ab74548c8018e738bfbb3c59db)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SRC_URIs that contained git repositories or other constructs that resulted
in an extension of "." or a substring of "scc" or "cfg" were matching the
tests for patches and configs. This was due to a python tuple being used
instead of an array. Switching to an array makes the match exact and the
behaviour we want.
(From OE-Core rev: 22aa5d040604b37ba984bae9e800e56ba6e4956d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The details of the kernel configuration audit are typically a
debug action, so should be moved to bb.debug(). But in order
to maintain visibility of the results, a reference to the log
file is provided in the standard message.
(From OE-Core rev: 9ab80ad88d34622a81670cdc45cc3275fc3ebabe)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rdepends getVar is returning NoneType and the string constuction fails
this occurs with the hicolor-icon-theme recipe.
(From OE-Core rev: a718cf3179540e049fd0d750ce11a97f84addf40)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the external module compilation a bit more robust for
cases where external module recipes may be passing extra params
to make via EXTRA_OEMAKE, and more than often one needs to pass
M=$(PWD) when building external modules and if we use EXTRA_OEMAKE
that would mean that it would appear in do_make_scripts as well
and since we are only changing the reference kernel src tree here
it will not run the make scripts in desired directory.
It is also well explained in top makefile in kernel tree around
line# 1335 in 3.4
|else # KBUILD_EXTMOD
|
|###
|# External module support.
|# When building external modules the kernel used as basis is considered
|# read-only, and no consistency checks are made and the make
|# system is not used on the basis kernel. If updates are required
|# in the basis kernel ordinary make commands (without M=...) must
|# be used.
Therefore passing M=... will not do the updates in the basis
kernel as expected with 'make scripts' so we have to bypass EXTRA_OEMAKE
[Yocto #3787]
(From OE-Core rev: 0e0a5ee405bab478f35690e95219a1e5f2ac7aa6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch will allow recipes that provide kernel modules to package
the module or modules in specific packages. That list is contained in
MODULE_PACKAGES, this defaults to to preserve the current behavior.
The package can also define MODULE_FILES to specify files.
[YOCTO #3803]
(From OE-Core rev: c1ff0467bf03a3342846f0d9dde74e34b740798f)
(From OE-Core rev: 977aee43868499ab87a098f3798e90d6978836b9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* as reported by Enrico on #oe
11:06:50 < ensc|w> JaMa: might this be caused by dc78ef91a2bf01efb8028c9afbe69e506e016265
which checks for 'd.getVar('LICENSE_CREATE_PACKAGE', True)' evaluating to 'True' for every
string (including the default 0)
(From OE-Core rev: bc42585ad9ca3a9891459ec3234893dff420b95b)
(From OE-Core rev: 0ab56ad52937823dc66b541dd4eda09fb6a34407)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- add EXTRACONFFUNCS variable in order to make it possible
to inject tasks after autotools_preconfigure
(From OE-Core rev: eafaeee58ab7a8f0613f54b8411f41ccefdf94c3)
(From OE-Core rev: d7950a25eda96a271aa6d541e03177d47e533f3f)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may as well expand the RDEPENDS when reading and writing as this function does.
if we don't do this, we could accidentally duplicate data and it also turns out
to be much less efficient.
(From OE-Core rev: d62a3151e7b252911c172a605b3089de355663c5)
(From OE-Core rev: 8f602e84e6ae4e346acef7cf5473343039fa352a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we do a signficant amount of tree traversal in many different places
which in inefficient. We can assume that the files don't change and cache the
file list which gives an efficiency improvement which this patch does using
a global variable.
(From OE-Core rev: 2d7608842d2dab07065e60aab729a5c8fd6b7907)
(From OE-Core rev: 5c7c8347eb1bc25d194be6f4be142ba0924e2600)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve package_fixsymlinks so we don't handle RDEPENDS for every single package
in PACKAGES.
(From OE-Core rev: 20ff8feb95d54e4db646f8c0cb006ce187e288af)
(From OE-Core rev: ca2ee871f82dd0ba4122a8373e4efd21cec5722b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move package_rename_hook call into PACKAGEFUNCS and also move package_get_auto_pr
to a more appropriate execution point, grouping package metadata handling
functions together.
(From OE-Core rev: a3f41cfbc8923e54198d10db292a11ef2edda4d7)
(From OE-Core rev: 96d268166ab0d4640767bf3a0886358dcb663d0f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The symlink handling code doesn't need to being part of populate_packages
and is logically separate so split it out into a separate function,
package_fixsymlinks.
(From OE-Core rev: fc964ed2b558b08327e2bc8c93ada80ca9d97337)
(From OE-Core rev: 08a194c13857b02a2febf9b1484b3cdd67a18160)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only use the PKG variable in emit_pkgdata so we might as well move the
fallback code there, allowing restructuring of other parts of the metadata.
(From OE-Core rev: 0136ae9a5f719f0e7ba6e00bfd366c0e61b3b3f2)
(From OE-Core rev: df38695f0fbea10289e85fdcb7c2bdf566990577)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no real point in adjusting overrides and creating a copy of the datastore,
just to access a single variable. We can do this just as easily with a slightly
more complicated getVar call. This improves performance.
(From OE-Core rev: 69f4351809359a0c7c38e8f233f3e3f7680ed2e2)
(From OE-Core rev: b5d65f5d5e5b26d3a2c673e899114c90bcaf6bc8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to check FILES in each loop iteration, we can just check it once
at the start when we read the variable.
(From OE-Core rev: 1bcc5cba12cbb1b846b433719d1b0820f5a97105)
(From OE-Core rev: 40542f7a46bfb8431e31eca9af06adb4b343d810)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mkdir function iterates over strings with many different operations,
even if ultimately the target already exists. This adds a check to the start
of the function so we don't waste time when the target already exists.
(From OE-Core rev: 06e188e673313f1eb9ae7d85ae64467c8d2a94b3)
(From OE-Core rev: 9509627e06ab4cf18c5bbf3f405ecf19a9f40287)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the kernel module handling consists of several special cases
and has its own path walking. This refactors the code to handle them in
a more standardised way which is also a bit more efficient.
(From OE-Core rev: ad51b54f0afe8c56033137b7cf9ba398877b2651)
(From OE-Core rev: cb24a72e97afb43de5e1e79ff807fd9e184df6a2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The splitfile and splitfile2 function names are confusing and the comments
are also misleading, hard to understand or plain incorrect. This tries to
improve things.
(From OE-Core rev: 46f3050a1f46f814e2d031e7e71600b2932d631c)
(From OE-Core rev: bc6f7085b42d8137957795e800e8b46d2f1eddac)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than keying on recipes that inherit kernel.bbclass, we should
be checking for providers of virtual/kernel when skipping kernel
recipes in multlib builds.
Not all providers of virtual/kernel inherit kernel.bbclass (notably
linux-dummy), so checking on the provider is a more complete check.
We need to be sure to check for inheritance of module-base as well, this
allows for packages that provides modules to avoid the multilib renaming.
(From OE-Core rev: dc7d181ab03ceab87a24d932130109003334dbf8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel_do_install() populates $kerneldir with files needed to build
external modules. To accomplish this there are several copy commands
to get source from the kernel source tree and build trees after which
a 'clean' is performed. Since we are copying from the build tree we
get about 1G of .o and .cmd files copied over only to have them
removed when we clean. This adds additional IO overhead as well as
overhead caused by pseudo. By avoiding copying these files in the
first place we get multiple gains:
* avoid initial copy
* avoid file deletes during clean
* reduce pseudo overhead
Additionally we are making use of cpio vs cp which tends to be
significantly faster at performing copies.
With these changes I observe a 15-30% decrease in the time to complete
the do_install() operation on the kernel.
[YOCTO #3517]
(From OE-Core rev: c753f9d59f4d0a5af4ea5deb6e2b9609e05314e2)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit removes an outdated comment that recorded an issue that has been
resolved in the commits 1c75a5df68 and
d2d5456cd3. Probably, the comment was missed
when changing the behavior in those commits.
(From OE-Core rev: fb1b51e902186b6a7d05e511fe3c3f03c10e3444)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, stale files can build up, particularly with the PR
server.
(From OE-Core rev: c30ae39229b35d72e2205040d76754b5120fa878)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On a trace I was a bit puzzled why getVar was making 180 calls to len(d).
This is an expensive operation that should be very rarely called and
certainly not by getVar. In perl's do_package it was resulting in
~1.5 million function calls from those 180 cases.
Ultimately this typo was why. Lets fix it and save the CPU cyles.
(From OE-Core rev: a8ba821d0002e4395fc5c80649fe14f93a7971fe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The same log message gets output multiple times in the log which look
confusing and is rather pointless. Move the log message to the correct
level.
(From OE-Core rev: 3917409004a830e7ad0646f05ad7421385cbd1de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in module.bbclass was appending the pkg_postinst and
pkg_prerm to all packages that are part of a given recipe, meaning
that the -lic, -dev, -doc, ... packages all got the scriptlet
This change uses only which macthes with the RDEPENDS and FILES
already used in module.bbclass.
The failure was that rootfs creation would fail due to the -lic package
being installed before the kernel and the script would fail.
[YOCTO #3803]
(From OE-Core rev: cf05c4578c99c0cb885cf2706f7f2b39b100aeb8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change ensures that the ls /etc/rpm-postinsts runs in the target
at first boot time, rather than at the creation time of the script on
the host.
This was causing the following error in the rootfs log:
+ install -d /srv/ssd/sgw/machines/fri2/tmp/work/fri2-poky-linux/core-image-minimal/1.0-r0/rootfs//etc/rcS.d
+ i=
+ ls /etc/rpm-postinsts/
ls: cannot access /etc/rpm-postinsts/: No such file or directory
(From OE-Core rev: e893cf0b3843701e80f5c9f47be04d1a88e5ed68)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- we need to use PRAUTOINX (it covers all cases)
- it addresses bumped PE issues
[YOCTO #3071]
(From OE-Core rev: ec81b985bb29a8562366f5343171e68a1f9cc4e9)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As long as we support only one locale package per recipe this leads to unwanted
packages in images. This patch was motivated by samba (meta-oe): only wanting
libsmbclient one gets full samba server into the image. For my standard image
the follwing package were removed by this patch:
-acl_2.2.51-r3_armv7a-vfp-neon.ipk
-alsa-states_0.2.0-r3_armv7a-vfp-neon.ipk
-alsa-utils_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-aconnect_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-alsaconf_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-alsactl_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-alsaloop_1.0.25-r3_armv7a-vfp-neon.ipk
alsa-utils-alsamixer_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-alsaucm_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-amixer_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-aplay_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-aseqdump_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-aseqnet_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-iecset_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-midi_1.0.25-r3_armv7a-vfp-neon.ipk
-alsa-utils-speakertest_1.0.25-r3_armv7a-vfp-neon.ipk
-attr_2.4.46-r4_armv7a-vfp-neon.ipk
-avahi_0.6.31-r7.1_armv7a-vfp-neon.ipk
-gtk-engines_2.20.2-r3_armv7a-vfp-neon.ipk
-pulseaudio_2.1-r15_armv7a-vfp-neon.ipk
-samba_3.6.8-r6_armv7a-vfp-neon.ipk
-vte_0.28.2-r5_armv7a-vfp-neon.ipk
-xz_5.1.2alpha-r0_armv7a-vfp-neon.ipk
Strange effect: For samba buildhistory's depends.dot says:
-samba -> libc6;
-samba -> libgcc1;
-samba -> libreadline6;
-samba -> libtalloc2;
-samba -> libtdb1;
-samba -> libwbclient0;
-samba -> libz1;
-samba -> update_rc_d;
-samba_locale_de -> samba [style=dotted];
samba_locale_de -> virtual_locale_de [style=dotted];
-samba_locale_fr -> samba [style=dotted];
-samba_locale_fr -> samba [style=dotted];
This is conflicts to buildhistory's result on samba package not mentioning
any changes for samba package.
(From OE-Core rev: 50354ebece43a6c13f9ca592e7d230765a26fdf8)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let postrm use the same logic as the postinst to run on both build machine
and target
[YOCTO #3633]
(From OE-Core rev: dc1bb7a5532411bc9cb7e8678bc540c44fd2cd63)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When use postrm on the build machine, it installs the hook in intercept-scripts
directory and exit 0, the hook will be later invoked and it will properly call
gtk-update-icon-cache.
[YOCTO #3633]
(From OE-Core rev: 6ae0b8339134300d0c179bd47dc3062e0e1f2f0b)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* move it from do_populate_lic to find_license_files so we can reuse it
to populate license in package itself
[YOCTO #3743]
(From OE-Core rev: 833f8c239aa475b3e0cacbd448a90079ac287468)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
useradd.bbclass adds sstate dependencies on base-passwd, shadow-native and
shadow-sysroot. Due to the way these are injected, they interact badly with
the other dependency validation logic and end up pulling in dependencies we
don't actually need. This patch adds code to optimise those cases out.
(From OE-Core rev: 784ca68fcca4ffb34390d55d9343570cfdf0305f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, do_rootfs has a dependency on all the do_package output being present
due to its usage of the pkgdata directories. This means that if you run:
bitbake xxxx-image -c rootfs
you end up having to fetch and unpack all the do_package data which is usually
large and inefficient. It also means rm_work has to leave all the do_package
data lying around so rootfs works.
This patch splits the actual creation of the pkgdata directory off into a separate
task, "packagedata" which happens immediately after do_package. We can then remap
the dependencies so this task is depended upon, not do_package. Sstate can then be
programmed not to require do_package at the appropriate times.
Whilst this patch doesn't do so, it opens the possibility of rm_work wiping
out the do_package output from WORKDIR as long as it also removed the do_package
stamp (both normal and setscene variants) and allowing more space savings
with rm_work which has been regularly requested.
(From OE-Core rev: 6107ee294afde395e39d084c33e8e94013c625a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- remove PRSERV_PORT variable
- use 'hostname:port' as PRSERV_HOST format
- remove USE_PR_SERV variable
- one can activate PRS by setting PRSERV_HOST
[YOCTO #3744]
(From OE-Core rev: e00f49de8b1f79c3e07b887d257bd75a46052fa0)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cmake class uses EXTRA_OECMAKE to adjust the cmake configuration. This
patch adds support for this, if the cmake class is used by the recipe.
(From OE-Core rev: d8c0ce5a4a27c8aa1d07fc15d6e000af725a51e6)
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Certain cpan Build.PL based modules were failing to build due to
the host's config information being used instead of the targets.
This patch sets the appropriate variables to ensure the modules
get the correct configuration from the target config_heavy.pl script.
It also ensures the linker is CCLD, not LD since the LDFLAGS contain
-Wl,XXX options and build failures result if LD is used.
libencode-detect-perl is a module which tests this class extensively.
(From OE-Core rev: 7fac8bffcd250aec90c0b675aeb2bbe7896d0ae1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove references to libzypp, zypper and sat-solver which have been
removed.
(From OE-Core rev: cc9144f99844a8485b2b96182bdf40429286ae66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If multiple recipes try and write the same package it resulted in a
rather confusing traceback and unintuitive error. This patch
prints a human readable error instead.
[YOCTO #3645]
(From OE-Core rev: 6f817779af77fdb0b861297f0f43c4c6607ce6f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids tracebacks from bitbake if the directory doesn't already
exist.
[YOCTO #3640]
(From OE-Core rev: 1a60e96b21d328fe936e594f3061459e8f2f1b5e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently hardware codecs are being injected in rather ugly ways and end up
either in no or all images. This adds a dedicated IMAGE_FEATURE for them based
on the MACHINE_HWCODECS variable. We may need to refine this in due course
but this patch at least illustrates the concept.
(From OE-Core rev: 1cb370587fd72e3f0f69678748108cc4116767fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backfilling DISTRO_FEATURES and MACHINE_FEATURES with _append statements happens
too late to use those variables with conditional inherits, like this:
inherit ${@base_contains('DISTRO_FEATURES','sysvinit','update-rc.d_real','',d)}
Instead, do the backfilling at ConfigParse time so that it happens earlier in
the parse, which results in that inherit behaving as expected when sysvinit was
backfilled.
(From OE-Core rev: 22429cdf79ed952072707a929643c7386fa7e056)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use migrate_localcount.bbclass to generate AUTOINC entries
which are exported to LOCALCOUNT_DUMPFILE
- import the generated AUTOINC entries
- one can migrate LOCALCOUNT to AUTOINC by executing:
bitbake-prserv-tool migrate_localcount
[YOCTO #3071]
(From OE-Core rev: ffab86f13cafb10d8d6273b6af8cd9a3c84eae20)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the /etc/rpm-postinsts/ directory was empty, the following error
would occur at system startup.
ERROR: postinst /etc/rpm-postinsts/* failed
This patch fixes this issue.
[YOCTO #3767]
(From OE-Core rev: 202263aeca837dc7b6615a3dc34569c199163733)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit c04f5435 "populate_sdk_base.bbclass: use SDK_ARCH instead
of SDKMACHINE" prevents not only the installation of 64 bit SDK
configurations on 32 bit hosts (which indeed cannot work), but also
the legitimate installation of a 32 bit SDK on a 64 bit host.
Fix this.
While there, also make sure we use the same patterns ("i[3-6]86" resp.
"x86[-_]64" to get unified strings for both INST_ARCH and SDK_ARCH.
(From OE-Core rev: 7ddd97b9b09fe7a327916ea88908a63375556ae6)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not every package puts the gtk-doc infrastructure into ${S}, so allow this to be
overridden.
(From OE-Core rev: 40353c9ef83f986a0d49cc6eb654b3ace6ef4dc4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to add a build time dependency on virtual/update-alternatives,
however we can't just do DEPENDS +=, or we end up with various problems. To
work around this, in the anonymous python space we ensure we only do the
addition when the package does not provide virtual/update-alternatives and
it is a target package.
Also the system wide PREFERRED_PROVIDER was incorrect. It references a
runtime package, and not the recipe it should have. This has been corrected.
[YOCTO #3691]
(From OE-Core rev: 56a59ef12936dcc6464cf1d43dda6957a5aa8c65)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Tested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building the target SDK portion, we can safely ignore various
package rdepends. These dependencies are not required on a build
only environment like an SDK.
[YOCTO #3691]
(From OE-Core rev: 1edd44bed9e9829f7c2466928bc3f45be102b84b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Tested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a build failure caused by a bashism and improve quoting whilst in
the area.
(From OE-Core rev: 9eb78340c61acddb0c2012e25c76c18735febb4d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found that if I had two packages architectures built (say core2 and i586),
that the shlibs data from i586 was being used in the core2 build. This
lead to odd dependency issues if the i586 build was out of date and core2
was being targetted.
When loading shlibs files, the last loaded wins so we need to iterate the
lists from least to strongest weighting, not the other way around. With this
patch applied, the contamination issue is resolved.
(From OE-Core rev: acd7b1c2ee9f3ff84c45a723dba5e0bc5f6a100c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gnu tar versions less than 1.24 pose a problem with the SDK
extraction. A typical SDK will have hard links. The SDK is created
with a newer version of tar but extracted with the host version of tar
which may be much older. The specific defect is that older version of
gnu tar do not properly handle the "--strip-components=" argument when
processing hard links and the paths do not get properly truncated and
hooked up with the corresponding real file payloads. This leads to
errors like the following during the SDK install:
tar: sysroots/qemux86-yocto-linux/usr/bin/getconf: Cannot hard link to `./opt/yocto/SDK-qemux86/sysroots/qemux86-yocto-linux/usr/bin/POSIX_V6_ILP32_OFFBIG': No such file or directory
The simple way to work around the problem is to just not save the path
information that is going to get chopped off anyway. This has the
added benefit that it saves a small amount of space in the tar archive
as well.
(From OE-Core rev: 0f4112016bac07f0294f2a4d0fde4659c0fed2d2)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
b27b438221e16ac3df6ac66d761b77e3bd43db67 introduced a regression when
PKGV is modified by the recipe. E.g. when having something like
| PV = "1.7.33+gitr${SRCPV}"
| PKGV = "1.7.33+gitr${GITPKGV}"
| RDEPENDS_${PN}-subpkg += "${PN} (= ${EXTENDPKGV})"
| inherit gitpkgv
The resulting core package has
| Version: 1.7.33+git234+cd01e8c-r11
and because the subpackage has
| Depends: vdr (= 1.7.33+git0+cd01e8c18d494150730214f033f84e5282ce7639-r11)
image build fails with
| * satisfy_dependencies_for: Cannot satisfy the following dependencies ...
| * vdr (= 1.7.33+git0+cd01e8c18d494150730214f033f84e5282ce7639-r11)
Patch avoids the 'PKGV = "cleanup(${PV})"' operation and replaces
AUTOINC directly within PKGV. This might introduce a regression too
when 'AUTOINC' is added to PKGV intentionally but impact is small and
can be fixed trivially by using another string.
(From OE-Core rev: 6e46664085fa49bc204fc944ca23ed6383e2ec51)
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Cc: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel compiler is not special and we currently have it so
we want to pass -march and -mtune options as CFLAGS to kernel
build so that compiler picks the right subarch flags when
compiling assembly files in particular. Otherwise defaults
are chosen which may not be right in many case e.g. when
compiling kernel for collie machine we should use arch=armv4
but it uses toolchain/as defaults which is armv5te
in some case e.g. thumb1 we know that kernel can not be compiled
in thumb1 mode so we can provide that information e.g. -marm
option through KERNEL_HOST_CC_ARCH variable as we do now
(From OE-Core rev: c49f967384ccbfe131bbb33ee518014f3fc4b38f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
update-rc.d is not necessary when systemd is enabled,
systemctl is the replacement
(From OE-Core rev: eaa82c842d3197e0251a887ba16028c22f9d8d94)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since linux-yocto based recipes have a split build and source directory,
we should export KBUILD=${B} to the devshell. This allows the kernel to
be incrementally build within the shell and not dirty the source
directory (which breaks subsequent full builds).
(From OE-Core rev: 88f88a22dfa730161168b0f228e3954178b74c6a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the past working from a non-bare clone would cause problems,
due to branches not existing in the WORKDIR clone. This hasn't
been true for some time, since the routines which convert remotes
into local branches have been functioning without problems.
So we no longer need the warning and it can be removed.
(From OE-Core rev: 42d42c24a37af0ea8896087c7cc8215eb19f633d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updatercd_postrm failed at image creation time because "-f -r ${D}" is not
used as update-rc.d's option.
[YOCTO #3633]
(From OE-Core rev: deb8ac868a989f41c0664312a5fb855358be2296)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since update-modules is now obsolete, remove it from the bbclass.
[YOCTO #3598]
(From OE-Core rev: 323146c7fdf1c47241f3fd5adab2cb3c6d24b56c)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
update-modules is obsolete. The bbclass was updated not to use it
anymore.
[YOCTO #3598]
(From OE-Core rev: 6fafbf71adb8b34211c2bc24226f0b1eb206a7d3)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle the potential case where the recipe level LICENSE contains an
incompatible license, but all of its emitted packages are in fact compatible.
Without this adjustment, it would skip such a recipe.
(From OE-Core rev: 9256361cf2e929004dcc5615b21fe3c46d9f7740)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Spamming potentially over a screenful of messages due to their
INCOMPATIBLE_LICENSE selection seems a bit unnecessary. If the distro was
configured that way, the user likely won't care, and if the user set it, they
likely know the implications, so make the messages debug instead.
(From OE-Core rev: 72f47df32dce91e3364e3837e2c47bdd2d632571)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This gives us an error message (bb.fatal) rather than a traceback due to the
uncaught LicenseError.
(From OE-Core rev: 7fab4cd27a2ad896218123ca82252e2b59526726)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was causing it to only obey the last of the elements in
INCOMPATIBLE_LICENSE.
(From OE-Core rev: df4a4b9792e3bd13b396b94e232c69054fdf19b5)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes define the latter, as that's what goes into the binary packages, not
the former.
(From OE-Core rev: 6a59b294b99b05e8973b5f2d60678988e90e2de3)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a single postprocessing function that enables no-password logins
for both openssh and dropbear when debug-tweaks is in IMAGE_FEATURES,
changing its behaviour slightly:
* Run it regardless of whether ssh-server-* are in IMAGE_FEATURES so
that it still takes effect if these are installed by adding
dropbear/openssh to IMAGE_INSTALL.
* Enable it to be run from image.bbclass rather than core-image.bbclass
so that it works for images that are using the former.
Second half of the fix for [YOCTO #2578].
(From OE-Core rev: 0937054e6e3e02565f57e60a8bdc14b0ad62e249)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there are postinstall scripts to be run on first boot and
IMAGE_FEATURES contains "read-only-rootfs", we know this will fail on
the target device so just error out during do_rootfs. This check was
already implemented for ipk, so add it to the deb and rpm backends. Also
make all backends use bberror rather than just echo to display the
error.
Fixes [YOCTO #3407].
(From OE-Core rev: 510e377f252dece8850487c30482f83df4a89c7e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, we have excessive dependencies leaking into the build. In
particular, glib-2.0 was sucking in python modules even if ptest wasn't in
DISTRO_FEATURES.
(From OE-Core rev: 7bf5ee91aa84a6fa85d6da361b64139889faa172)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* http://cgit.openembedded.org/openembedded-core/commit/?id=67e77cd948c69798695d5d5f34163ef89339b35a
moved DATETIME dependency from MODULE_TARBALL_BASE_NAME to MODULE_IMAGE_BASE_NAME
but without copying that vardepsexclude
(From OE-Core rev: 9a93866067253746a889bfe444b6036cf85944b4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explain the elf/cpio.gz snippet of code, and update a comment to
reflect the correct variable name. No functional change.
(From OE-Core rev: 0ca4a3a25e4495bf6e2e3932c019bd15856faf55)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake -c checkpkg fetches the latest version for all packages,
including the ones from sourceforge and those that have
ununsual package naming.
Also removed all pn-native/nativesdk-pn entries from the resulting
checkpkg.csv file if the system already reported the latest version
for pn.
(From OE-Core rev: dc33d69df55ad8d63024d34e35a0b987e01b0077)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to support a RO rootfs, the cache generation during postinstall
has to be done on host. However, gtk-query-immodules application will
only be able to parse shared objects from the same ELF class.
In order not to have a native package for all the recipes providing
an input method, so we can generate the cache file natively, run
gtk-query-immodules through qemu emulator.
[YOCTO #3602]
(From OE-Core rev: 78281edfe2342dccd7f598277464a3dd05ac4c0e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define the additional variable MODULE_IMAGE_BASE_NAME since some
layers (like meta-ti) would find it handy for multi-kernel
definitions in that they wouldn't have to define their own
variable representing exactly the same thing.
(From OE-Core rev: 67e77cd948c69798695d5d5f34163ef89339b35a)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernels <2.6.30 don't have $kerneldir/tools directory
* so we got this error:
* sed: can't read ...SNIP...linux/2.6.30-r0/image/usr/src/kernel/tools/perf/Makefile: No such file or directory
* ERROR: Function failed: do_install
(From OE-Core rev: 4dd39a23dfe069ad34a925e00407b4dde978cb01)
Signed-off-by: Marco Cavallini <m.cavallini@koansoftware.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specify dirs in which the shell function "sstate_create_package" and
"sstate_unpack_package" are executed and don't use ${B} as default dirs
to avoid possible race with task do_rootfs at deb image creation time.
[YOCTO #3674]
(From OE-Core rev: ccef1cf783669a4683eda9d4b44dbe6bcf426259)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the mirror tarball is available, it's a better choice for this than the
repository directory.
(From OE-Core rev: 8183962869363731acf57f2f531da737512f0f2f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Gilbert Coville <gilbert_coville@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The buildsystem does not install locale files anymore, when
TARGET_VENDOR is empty. This regression was introduced by
ff01518c6667e1b6e87df4e5a435a701d0f38fa7
(From OE-Core rev: 7d64232f370817c0536412589bd4ed612f214e18)
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the "packages" variable is already tested a few lines above in
the same routine:
if len(packages) < 1:
bb.debug(1, "No packages to build, skipping do_package")
return
there is no point testing it again, and the error message doesn't even
refer to "packages", anyway.
(From OE-Core rev: 371fbacff47828cfff99f1152f9e269e27c474da)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FILES_${PN}-bin = "${bindir}/* ${sbindir}/*"
so the comment should match that.
(From OE-Core rev: 81bc0b96a085742f7dc9e8e90bb32529efbaf920)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This improves compatibility, as both the debian update-alternatives and the
chkconfig alternatives require absolute paths.
(From OE-Core rev: 2b8bf64f1f6999b65ddd3efc2c6ddb7e70fead53)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this you it's harder to see which kernel is newer version
e.g. after branch change LOCALCOUNT in SRCPV is reset to 0, so it needs PE bump for upgrade path
but then it's clear why gitr1+HASH has newer DATETIME then gitrN+HASH, so include PE in name
* it will sort alphabetically wrong in deploy dir for a while until old images are removed
(From OE-Core rev: 3b5fe6d2cd58b5db70c3d319ffc66b1cbff1f43a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- all the recipes that overwrite LOCALEBASEPN must consider
also the MLPREFIX
- if the LOCALEBASEPN variable is not overwritten then it will
have the correct prefix (LOCALEBASEPN ??= "${PN}")
(From OE-Core rev: 855d64a3091c5358e2e1a7f4247929515b068708)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- skip the non-packagegroup allarch recipes in multilib_virtclass_handler
- extend PROVIDES/RPROVIDES for allarch recipes which are not packagegroups
- use variants from MULTILIB_GLOBAL_VARIANTS (lib32 lib64 libx32) to create
additional pkgdata files for multilib allarch: ${pkgdatadir}/${variant}-${PN}
and ${pkgdatadir}/runtime/${variant}-${pkg}
- use variants from MULTILIB_VARIANTS to create additional pkgdata files
for multilib kernel/module-base recipes
- add a sanity check to determine if the current multilib is in
MULTILIB_GLOBAL_VARIANTS
[YOCTO #2918]
[YOCTO #3440]
[YOCTO #3565]
[YOCTO #3568]
(From OE-Core rev: bc4da2573dfb59ea2fc4af359701818df20f7663)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* check if icondir is directory before calling gtk-update-icon-cache, like all other calls do
* fixes:
| > Executing update_icon_cache
| + chmod +x update_icon_cache
| + ./update_icon_cache
| gtk-update-icon-cache.real: Failed to open file /tmp-eglibc/work/qemuarm-oe-linux-gnueabi/shr-image-all/2.0-r20/rootfs/usr/share/icons/enjoy.png/.icon-theme.cache : Not a directory
| gtk-update-icon-cache.real: Failed to open file /tmp-eglibc/work/qemuarm-oe-linux-gnueabi/shr-image-all/2.0-r20/rootfs/usr/share/icons/monav.png/.icon-theme.cache : Not a directory
| gtk-update-icon-cache.real: Failed to open file /tmp-eglibc/work/qemuarm-oe-linux-gnueabi/shr-image-all/2.0-r20/rootfs/usr/share/icons/orrery.png/.icon-theme.cache : Not a directory
(From OE-Core rev: 6c2962dc117304c542fd5458b39524ecdb81cae9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ncurses library looks at the compiled-in search path for the terminfo
database, and that path no longer exists, when using cached binaries (sstate).
Export TERMINFO pointing at the current sysroot, so the attempt to run mconf
is able to find the correct terminfo db.
(From OE-Core rev: b036adfb868c042245cd8fba8ecc2ba53169bfea)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
the patch was imported from meta-mentor layer on yoctoproject git server
http://git.yoctoproject.org/cgit/cgit.cgi/meta-mentor as of commit id
0cae284f294e3a2c99d9a4d79c95c25103cd8f8b
Signed-off-by: Fahad Usman <fahad_usman@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch creates a new distro feature "ptest", which creates -ptest
packages containing the test suite of the package for running on the
target. Test files are installed in /usr/lib/<pkg>/ptest.
The patch also includes a change to automake, splitting the "make check"
target into separate steps for building and running the tests.
(From OE-Core rev: 6f92e7f8891008dd3c89325d3fbe2da853372326)
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debugging code was accidently left in the previous commit. Remove
the code as it prevents multiple concurrent bitbake builds.
(From OE-Core rev: bbd55cc34ca893c7202634fe138cedb2f380be56)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Smart does not have a method to perform an install, but ignore failures.
There was a class of failures that stopped Smart from processing
attemptonly installs. To work around this we need to iterate over the to
be attempted list.
(From OE-Core rev: 7c11ab93242ad3453b730da79a641479de588227)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For multilib the vendor string is altered, so we need to iterate over
all of the multilib vendors when we do the glob processing for
complementary packages.
(From OE-Core rev: ff01518c6667e1b6e87df4e5a435a701d0f38fa7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
In addition, the RPM package arch have been munged by adding the multilib
identifier. This identifier needs to be stripped when generating the
installed_packages list for the complementary lookup code to work.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed when sstate cache is fetched from another build server.
In this case, the postinstall will fail because the backend libraries
path will be from the build server.
(From OE-Core rev: bba414bc9d14eb2d29b54c68259d13ddbe6567fa)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The modules.tar.gz archive is sometimes of no value and it can take
a noticeable time to build if many modules were enabled in the kernel
configuration. The extraneous file also contributes to deploy/ clutter
and is a waste of disk space.
Allow it to be suppressed by setting MODULE_TARBALL_DEPLOY="0".
(From OE-Core rev: 262bfde1c5c51cc902b50bf0dda543434f12010c)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* so it will work look KERNEL_IMAGE
* also we were recreating modules.tgz with every kernel build, but
overwritting the same output file
(From OE-Core rev: 73f242a61f913a0b0cd88265cd9ff6bcf3924623)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* I have kernel recipe which depends on other recipe to build tiny initramfs
image, without this change it rebuilds not only that initramfs image
but also whole kernel when DATE or TIME is changed and OEBasicHash enabled
* also resolves ERROR shown when bitbake -S is used for image:
ERROR: Bitbake's cached basehash does not match the one we just generated
(/OE/oe-core/openembedded-core/meta/recipes-core/images/core-image-minimal.bb.do_rootfs)!
ERROR: The mismatched hashes were 8c35cdf8a5d09c03941f081dd9f6d8dc and b5d6e2e5952770557c48c5779ddb73fc
(From OE-Core rev: a78d2d21fffd646a0d6e0f02a8355be010a7bd28)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you change a machine to a different package architecture, you will see sstate
errors about overwriting files as the code stands today. Instead it should clean
out the files safely and correctly. This patch changes the naming of stamp-extra-info
manifest files to avoid this problem. It will potentially trigger warnings during
builds in existing TMPDIRs until the system adjusts to the new naming, these are
harmless.
[YOCTO #3521]
(From OE-Core rev: 2cc8ee57f8148844bb7bcd4aaf34f6891cf3d410)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code was written before SSTATETASKNAMES existed. Since it
does exist, lets simply the code.
(From OE-Core rev: 9817e2efdb94395655d711f5eadedcd249c8cffe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using distutils for a python package based on a python-setuptools
installation script that sets up a console script, the header
of the console script created by setuptools points to the
python-native path.
The console scripts are commonly executed in the image, but not
in the sysroot environment. Therefore, the header of the
console scripts should point to the python interpreter in the
image.
Setuptools does not allow to set the path of the python
interpreter via some command-line argument.
Hence after the installation script ran, the distutils
class replaces the path in the console script files created by
the installation.
(From OE-Core rev: 11229def87d048c51190b9bd275c73d1f8bf6007)
Signed-off-by: Lukas Bulwahn <Lukas.Bulwahn@oss.bmw-carit.de>
sgw - added \ to protect the space.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* some packages (e.g. uptime, cpu, forecasts, news from meta-efl)
don't have remove-potcdate.sin in po subdirectory, but Makefile.in.in
supplied by autotools.bbclass depends on it and fails without like this:
| make[3]: Entering directory `/OE/shr-core/tmp-eglibc/work/x86_64-oe-linux/uptime/0.0.2+svnr80477-r0.0/E-MODULES-EXTRA/uptime/po'
| make[3]: *** No rule to make target `remove-potcdate.sin', needed by `remove-potcdate.sed'. Stop.
| make[3]: Leaving directory `/OE/shr-core/tmp-eglibc/work/x86_64-oe-linux/uptime/0.0.2+svnr80477-r0.0/E-MODULES-EXTRA/uptime/po'
| make[2]: *** [uptime.pot] Error 2
(From OE-Core rev: 5a3116638394dc72c54cf5d4f8bd42a7be0b1768)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #3565]
All packages should not be multilib specific, however when the multilib
rules run, they automatically rename the 'all' target recipes. As such
there is no way to know if an 'all' package should or should not contain
the multilib prefix. We workaround this issue in the translate function
by checking to see if the runtime-reverse file exists or not.
The workaround should be removed once a proper solution to the architectural
issue is in place.
(From OE-Core rev: ea4b8c73a7f807ccd9aa22dfcf41285145a9dd2e)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a condition where the package will fail to install, but smart does
not capture the error. Add the error string to the scan list.
(From OE-Core rev: 230068110e1cda349f9bf3886d8d06ac46deea37)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When generating an SDK, we need to use either the SDK or TARGET version
of the OS. They are not interchangable!
(From OE-Core rev: 8f6e33231439c9c2c1584b2790f62f833439e3c1)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable MULTILIB_PACKAGE_ARCHS has been removed in favor of a
repurposed MULTILIB_PREFIX_LIST. The format of this item is now
<libid>:<arch>:<arch1>:...:<archN>. This ensures that we can correctly
translate the libid to one of the supported archs in a tri-lib system.
All of the users of MULTILIB_PREFIX_LIST and MULTILIB_PACKAGE_ARCHS have
been modified accordingly.
Also change the way attempted packages are installed, verify the package
exists in the translate functions, then perform the install in one single
operation. This results in a significantly faster install time.
(From OE-Core rev: ffe6cf3a1c57defdbe8531bdeb588e199177bb6c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch over to smart on the target when package-management is enabled.
(From OE-Core rev: 69f258a2422e6a6ae71834dd097ffa00a1784d9e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use Smart to construct the root filesystem for images and the contents
of SDKs rather than the custom scripts around rpm we had previously.
This ensures the result when producing an updated image will be the
same as upgrading to the same package versions from an older image on
the target, as well as allowing us to remove a substantial amount of
code making the rpm classes much easier to follow.
Some bugfixes from Bogdan Marinescu <bogdan.marinescu@intel.com>.
SDK implementation and testing as well as a number of bugfixes from
Mark Hatle <mark.hatle@windriver.com>.
(From OE-Core rev: a726ae7c032fac1aa49ce34180fa2ed2dcaf87d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl module for automake has an embedded path in it, this needs
to be relocated.
(From OE-Core rev: ad79360c1d992830d4f0e06a3bbf0622658c0540)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_make_scripts() executes before do_unpack()/do_patch(), the build
fails because it can't cd into the workdir of a recipe using this
class, so make sure do_make_scripts() doesn't run before the package
has been unpacked and patched.
Fixes [YOCTO #3589].
(From OE-Core rev: 824cf145bcb55bb99a717a2dfd73e43e6b3feea4)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we normalize a rpath which contains ORIGIN variable, the binary will end
up without those rpaths at all. So check first if rpath contains ORIGIN variable
and if not, move on and normalize it.
(From OE-Core rev: 46dc514ff5a3d2693546cf95c5481e0539c43580)
Signed-off-by: Andrei Gherzan <andrei.gherzan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By normalizing the paths the path comparing code works correct
to generate the right RPATH even when there is a A/../A in TMPDIR
[YOCTO #3408]
(From OE-Core rev: 50327f2bba9f479dd209cdc54646b9d551e84c59)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the set +x, and revert to the normal logging behavior.
(From OE-Core rev: e799d771c9ed9e41a900e2e96c23d4ae35d5fe08)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2138]
Commit 2175842116 dropped the forced use
of FAT32 for the hddimg generation as it broke with very small images
(< 32MB). Unfortunately, left to its own devices, mkdosfs appears to select
FAT16 even for very large images, resulting in 2.2GB images being
generated as FAT16:
$ ls -lah core-image-lsb-sdk-atom-pc-20121010233936.hddimg
-rw-rw-r-- 1 dvhart dvhart 2.2G 2012-10-17 08:00 core-image-lsb-sdk-atom-pc-20121010233936.hddimg
$ file !$
file core-image-lsb-sdk-atom-pc-20121010233936.hddimg
core-image-lsb-sdk-atom-pc-20121010233936.hddimg: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 128, root entries 512, Media descriptor 0xf8, sectors/FAT 138, heads 64, sectors 4502496 (volumes > 32 MB) , serial number 0x50761926, label: "boot ", FAT (16 bit)
The result was a runtime boot error from SYSLINUX and a failure to boot
live images greater than 1GB in size.
While strictly speaking it is the cluster count that determines which
FAT size is used, that calculation requires more information than we
have readily available (such as sectors per cluster). If we let mkdosfs
determine sectors per cluster and just set a sane threshold above which
FAT32 is used, we get correct bootable images. With this patch the 2.2GB
core-image-lsb-sdk uses FAT32 and the 21 MB core-image-minimal uses
FAT16, and both boot in qemu successfully:
$ ls -lah tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg
-rw-r--r-- 1 dvhart dvhart 2.2G 2012-12-12 14:18 tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg
$ file !$
file tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg
tmp/deploy/images/core-image-lsb-sdk-atom-pc-20121212220835.hddimg: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 8, Media descriptor 0xf8, heads 64, sectors 4470304 (volumes > 32 MB) , FAT (32 bit), sectors/FAT 4357, reserved3 0x800000, serial number 0x50c902b7, label: "boot "
$ ls -lah tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg
-rw-r--r-- 1 dvhart dvhart 21M 2012-12-12 14:06 tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg
$ file !$
file tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg
tmp/deploy/images/core-image-minimal-atom-pc-20121212220600.hddimg: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 4, root entries 512, sectors 41408 (volumes <=32 MB) , Media descriptor 0xf8, sectors/FAT 41, heads 64, serial number 0x50c8ffec, label: "boot ", FAT (16 bit)
I have tested and booted core-image-minimal and core-image-lsb-sdk for
atom-pc with qemu-system-i386 using this patch.
(From OE-Core rev: de808c552d445502bd99f78bb8159d21149f87c1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Steve Sakoman <steve@sakoman.com>
Cc: Joshua Immanuel <josh@hipro.co.in>
Cc: Przemek Czesnowicz <przemyslawx.czesnowicz@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for the postinstall scripts to have access to the recent
improvements when generating the target SDK sysroot, export these
variables in populate_sdk.
(From OE-Core rev: 06151c34f4f4cb669b2f93ebb2f78cfecf698355)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are several overrides that don't make sense as part of FILESPATH. This
introduces FILESOVERRIDES and allows us to drop some of the pointless ones,
simplifying the files search path further and improving the user experience.
If needed by specific recipes, other overrides can be added back in for
specific cases.
(From OE-Core rev: b8b1b39961332c99d62ee466f7859bd62a0f806f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to prepend MLPREFIX to LOCALEBASEPN in order to
fully enable multilib
[YOCTO #3440]
(From OE-Core rev: 91fe09a9a8b317d27145efff4201f1138d6a45d4)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The packages which start with "rtld" are ok
[YOCTO #3440]
(From OE-Core rev: 1bb3f44065d0470dd2f6950e267ef991c2ce6fd5)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function has different behaviour if the split directory doesn't exist
depending on the recursive argument: non-recursive uses os.listdirs which throws
an exception, recursive uses os.walk which doesn't.
do_split_packages should silently handle non-existent directories because it's
mainly used for plugin directories, which may end up being empty though changing
the distro configuration (for example, connman without wifi distro feature).
So, add an early exit if the split root doesn't exist.
(From OE-Core rev: 937101e3fdd6afd00f6f8a8be411a67110c4ae78)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow INCOMPATIBLE_LICENSE to be a whitespace-separated list of
incompatible license strings and/or glob patterns.
Also fix wildcarding: the string in INCOMPATIBLE_LICENSE was clearly
intended to match with wildcards (e.g. "*GPLv3" to match both GPLv3
and LGPLv3), but this was broken because of a bug in return_spdx()
which would die with a runtime error when there was no SPDXLICENSEMAP
entry for the string.
(From OE-Core rev: 8a8d00f4c9f7fe5f9f173b43b86cd18a6c75435c)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit (0b0674ebcd) was also changing
the populate_sdk_deb.bbclass but the deb backend does not support
multilib just yet. So, when compiling the standalone toolchain tarball,
we ended up with an empty tarball if the deb package manager was chosen.
Reverting the deb part until the multilib support is added to deb.
[YOCTO #3532]
(From OE-Core rev: 34baee37caccced13fb26f446b865c9f25edf339)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current maze of IPKG_ARGS variables is hard to understand and worse,
not even used in some places. This simplifies the code and specifies the
options in one place.
(From OE-Core rev: 5e482b278c3775b0acecc621cf2d3b90ee516f26)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having to include some dummy class is suboptimal and we no longer need to
do this. Also move this check to populate_sdk_base since we then don't
need to include it in toolchains specifically.
(From OE-Core rev: 2ee979ff71d31e497be856ea1443667c6d799d34)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake now supports empty expansions for inherit usage so we can simplify
these statements.
(From OE-Core rev: 77cd2ef06bdf701b047c4f8c817b364b8b4b8837)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As locale packages are installed on the image, we should
be including them in the package/license manifest.
This ensures that the manifests are accurate and complete.
[ YOCTO #2461 ]
(From OE-Core rev: 4578b708ada1ffb99ab542da793977ffb90a9b50)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using update-alternatives, there should be a runtime dependency on
${VIRTUAL-RUNTIME_update-alternatives}. Without this, it's possible to
get into a situation where the package is not installable.
(If VIRTUAL-RUNTIME_update-alternatives is not defined, no requirement
is added.)
(From OE-Core rev: 8a4c5765fb56d17c3d82ff6db47863e934c9fcbe)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch addresses an SDK installer issue on older distributions if
the installation takes place in another directory than the default one. In
fact, is all about the 'file' utility version used for determining if a
file is a text file. For example, for a perl script, newer 'file' versions
return:
"...script, ASCII text executable"
while older versions return:
"...script text executable"
Hence the regex pattern didn't match the scripts.
Also the patch contains two unrelated minor fixes:
* return an exit code of 1 instead of -1 when installation machine is
not supported. That because on an older distribution we also get this
error message: "exit: 9: Illegal number: -1";
* remove unnecessary $SUDO_EXEC prefix to grep;
[YOCTO #3538]
(From OE-Core rev: e7e23a1e5aae4028e21e37ec09e9d431a9adfbcb)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This would be useful for doing siginfo compares to understand why a build
is not reusing something when using SSTATE_MIRROR. No error will be reported
if it fails to find the .siginfo file
[YOCTO #2898]
[RP: Small tweaks]
(From OE-Core rev: 6d86690330f0d43839b904fced4b4b02cb27b8c6)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make the PRS use regexes for the versioning
of packages who have the distros on sourceforge and
for those who have faulty reports.
(From OE-Core rev: 2fe52b23c643d2125867dc9fcc9c01a184a9e238)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- adapt the PRServer to generate an incremental number for every revision set
associated with a (PN, PV)
- use one incrementing value rather than several
- PV becomes 0.1+gitAUTOINC+deadbeefdecafbad_decafbaddeadbeef
- if PV contains 'AUTOINC' set PKGV to the same thing with AUTOINC replaced
with the "auto PR" value
- if the PRServer isn't running replace AUTOINC with 0 (no package feeds, but usual
image creation would work)
- use the PR table with "AUTOINC-${PV-without-SRCREVs}" as key
- modify prexport/primport to address the generated srcrev entries
- this patch addresses the following proposal:
http://lists.linuxtogo.org/pipermail/bitbake-devel/2012-November/003878.html
(From OE-Core rev: b27b438221e16ac3df6ac66d761b77e3bd43db67)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
packages/apr/apr-util,apr use this, but it not been in the class
patch the config files to be 'installed' and not point to the build
and source-directory.
From OE-Classic:
http://git.openembedded.org/openembedded/commit/?id=030992bdd415c8892cf2925cf6fbe888226be046
[YOCTO #3267]
Orignal Author: Holger Freyther <zecke@selfish.org>
(From OE-Core rev: ab56f1063a666df5faddd97f44758c8ae378e51c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change will allow for the icon cache generation at rootfs time and
only once, at the end. So, even though there will be many packages
depending on gtk+, the icon cache generation will be done once.
Hopefully, this will lower the target's first boot time significantly
by using the power of the host machine to generate the cache.
(From OE-Core rev: 74e34f6828771095a25d2c2de89f468b33e359f7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for the postinst scriptlets to be able to run once we need to
export the location of the intercept scripts and also the location of
native sysrootfs. The gdk-pixbuf binaries will need the latter because
in order to generate the loaders.cache it will need to scan some shared
libraries that must be native. Even though the output is a text file.
(From OE-Core rev: 927fabf549bb79cc179d2cb0a953dcd515acf464)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch will allow the repeating postinst scriptlets to be run
only once, on host, at do_rootfs time. This will lower the time for
rootfs generation and, also, instead of running some time consuming
scriptlets at target's first boot, we will do on the host.
(From OE-Core rev: 0d239328b1c6b9e4afadad75972d359181fbe1a5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Touch a file that is later greped to make sure it exists.
(From OE-Core rev: a17bf5d840b5777918f324d26e085498dec86b76)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace ( or ) with __. This allows RPM style dependencies to be satisfied
in deb style packages.
(From OE-Core rev: 12acb6bb00ba665571fcfbdb0ef4668ca0a98d5b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the scriptlets are processed in RPM, they have a different dependency
set then the core package. OE has no way to specify dependencies for the
pre/post scriptlists, so we simply make the runtime dependencies scriptlets
as well.
(From OE-Core rev: c1acac8c46aa75d78634c30de773b28a1466070c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this patch:
Python 2.7.3
>>> sstate_search_cmd = "grep -rl /OE/jansa-test/shr-core/tmp-eglibc/pkgdata/armv7a-vfp-neon-oe-linux-gnueabi/runtime-reverse/vim-common /OE/jansa-test/shr-core/tmp-eglibc/sstate-control --exclude=master.list | sed -e 's:^.*/::' -e 's:\.populate-sysroot::'"
>>> cmd_array = sstate_search_cmd.split(' ')
>>> search_output = subprocess.Popen(cmd_array, stdout=subprocess.PIPE).communicate()[0]
grep: |: No such file or directory
grep: sed: No such file or directory
* Adding shell=True and using cmd string instead of array makes it work:
>>> search_output = subprocess.Popen(sstate_search_cmd, shell=True, stdout=subprocess.PIPE).communicate()[0]
>>> print search_output
manifest-armv7a-vfp-neon-gvim.package
manifest-armv7a-vfp-neon-vim-tiny.package
manifest-armv7a-vfp-neon-vim.package
But still isn't 100% reliable, I guess it's caused by some other package
being removed from sstate while grep is already running.
So sometimes grep can show error on STDERR
>>> search_output = subprocess.Popen(sstate_search_cmd, shell=True, stdout=subprocess.PIPE).communicate()[0]
grep: /OE/jansa-test/shr-core/tmp-eglibc/sstate-control/manifest-armv7a-vfp-neon-systemtap.package: No such file or directory
(From OE-Core rev: d84f7d7a12b4271f7b2bfde9fb356d750abff15d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of subprocess.Popen().communicate()[0] is a string.
Checking for '!= None' will always match causing bogus warnings
regarding already staged files.
(From OE-Core rev: acdd76482efc3caf80e9e0b7359be7ca724ae09a)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes a lot of QA warnings about unpackaged /usr/share/share
(From OE-Core rev: 10457e343b27e63b35e0278b00e9c25106b0cc1b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
My previous patch removed the mkdir and added it at the end of the
"gaining SUDO rights" block in order to fix directory creation when
installing in a location without proper rights. Unfortunately this
messed up the directory creation as normal user as it will ask for
sudo right in order to create it...
Hopefully, this will fix both cases.
(From OE-Core rev: 86286287d0134ade73f6a282158dde86bf0159e8)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mkdir was in the wrong place and missing sudo rights. Hence, the
installation to default location (or any other for which the user didn't
have rights) would fail. Unless the installer itself is run with sudo.
(From OE-Core rev: 555d03c466490ab12b2b1d049736593da2334e97)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should always leave the tree on a BSP branch or master when
do_validate_branches completes to avoid modifying version tracked
files are part of the build process. Modifying these files will lead
to errors when changing branches, since the contents would be lost.
This is evident in the case that a the meta branch is reset to a
known SRCREV and the tree was left on the meta branch. This branch
tracks the meta/meta-series, and other artifacts of the original
tree construction. When the build process runs, it updates these same
files, which creates a conflict when switching branches.
This has been fixed in the tree construction scripts to not track
these files, but a secondary fix is also required of not leaving
the build on these branches, to allow arbitrary trees to be built.
[YOCTO #3413]
(From OE-Core rev: 57397592ff8ec16922604d398c18d53a589be41f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shell archive that populates the external SDK should fail if it
cannot find the ld-linux.so else it will corrupt all binaries because
a random path will be used from the list of executables when dl_path
is empty.
(From OE-Core rev: 206aa794933d41dfb037e9c654c818cd4d4f956d)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A regression was introduced by commit:190cb591 that it doesn't
consider the situation that some archs contain "_" originally, so it
results in issues when dealing with archs like qemux86_64, x85_64.
Added a conditional statment in to handle that case.
(From OE-Core rev: 8567991639fda8d2a1e88169b86c72e14cc6c82d)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1.Adds a sudo passwd prompt during installation if the
user couldn't install on the dir.
2.Adds option -d <dir> to enter dir without prompt.
3.Adds option -y for automatic yes to all prompts, a non-
interactive method.
[YOCTO# 3153]
[YOCTO# 3309]
(From OE-Core rev: e85e1aace604626914a06dab4663094d6dd9b035)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it was introduced in 2010 by 8c3a7ebac8
but doesn't seem needed anymore
* also such do_rootfs failure is good indication that runtime packages
installed are not sane, ignoring this error in do_rootfs just
transfers the issue to end user when he does "opkg upgrade" later
on device
* tested on SHR images with whole feed included and only issue was
gstreamer/gst-plugins-* locale packages (and there is patch for this
on oe-core ML)
(From OE-Core rev: 1f7d3a2e9071ff78170c06ebf58c7400a5ee09bf)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
list_installed_packages should output uniform formatted archs for all
packaging system(deb, rpm and ipk), for they are used by common code to
grab the package infos. Otherwise, it will lead some -dbg packages to be
missed processing in come cases.
It's introduced by commit: fc985f51, package_rpm.bbclass: fix the arch
(replace "-" with "_").
Fixed by replacing "_" back to "-" in list_installed_packages, make it
output real arch values which can be safely used.
(From OE-Core rev: 554f2436435bf96c6735827f491c1b78b198c016)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch contains two fixes:
* if the user wants to install the SDK in a directory that already
contains a SDK for the same architecture, a warning will be shown;
* when the symbolic links are relocated use -n option. Otherwise,
symbolic links to existing directories will be created in the
directory itself;
[YOCTO #3401]
(From OE-Core rev: cd035f170a2448b9ebcf0cfac5d4c0fa472b7049)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The force_postinstall option was missing and some packages were
configured on target rather than on host at rootfs time.
(From OE-Core rev: dfadfaa0b38678029ffebe14f15e2dbc148cb1fb)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently there is some odd behaviour of the packagegroup class in relation
to sstate since it sets PACKAGE_ARCH = "all" but does not use the allarch class
leading to it being undetected by sstate.
Previously it was not possible to use allarch as the recipe couldn't "undo"
settings made by the allarch class. Since this no longer happens when
PACKAGE_ARCH != all, we can use the allarch class.
This patch also fixes up one case we need to preserve TRANSLATED_TARGET_ARCH
and ensures sstate only assumes allarch when PACKAGE_ARCH is "all".
(From OE-Core rev: 591fa7c1ab9e9ff75fdce602c77ecdeda3a255d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have cases where we'd like to inherit this class by default but allow
special cases to override it. This change makes the code of the class
conditional on PACKAGE_ARCH remaining set to "all", allowing it to be
overridden. packagegroup usage is one case this is desirable.
(From OE-Core rev: 7dd91402b719ac62b51088f234354f82bfa9c4b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the interests of simplifying things, remove P and PN from FILESPATH,
instead relying on the BP and BPN versions which work in 99% of cases.
In any problematic case such as a -native only recipe, either the patch
directory can be renamed or the recipe can set FILESPATH specifically.
(From OE-Core rev: fb359583b659cda643973fa285002aaffb729a51)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Files are very rarely, if ever placed in ${PF}. If a recipe needs to do this,
it can easily append to FILESPATH so it makes sense to drop this from the
default search path.
Equally, using FILE_DIR as part of the search path leads to 'bad' SRC_URI
entries and/or file layouts which are not preferred. I'm therefore of the
opinion we should also remove this from FILESPATH and encourage people to
cleanup any places this breaks my correcting the layouts to match the standard
or worst case adding to FILESPATH in recipes that need it.
These changes work towards making the system more friendly as users won't be
greeted with huge search paths we rearely use making the "correct" layout
more obvious.
(From OE-Core rev: 3efa13cd76bbd5611805021945fc9def88d9fd93)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some bad logic in license.bbclass misses certain package level
LICENSEs.
(From OE-Core rev: c5a171d5817233c0371e6f5b19f57f3c4b84f5ac)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These test look for programs in / that depend on programs in /usr. After
a brief discussion in #oe, we decided these tests should be disabled so
we can focus on more serious QA issues.
If you are working on a system where / and /usr are on different partitions,
you should turn these tests back on and resolving the QA warnings.
(From OE-Core rev: 2fb58da56e8e7044de21fd10fe9164d204587236)
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some images override IMAGE_BASE_NAME in the recipe causing targets using image-{live,vmdk} to fail.
(From OE-Core rev: 7e000fef0bf917f27dcad66dd90fae6c155c4d1d)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up and clarify the populate_sysroot task dependencies. Target sysroot
packages do need their dependencies installed, as do some target/cross
relationships. We can whitelist the *-initial dependencies as these are
never needed indirectly.
(From OE-Core rev: eeec307917234d97be2674beeadef71599fb1487)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example gcc-cross depends on linux-libc-headers and needs it to be present
to build/work correctly.
(From OE-Core rev: 43ce7a1d86bf82d976ad241057a4207b1a340b3b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a meta branch is not strictly required by the tools (and
recipes like linux-yocto-custom do not have meta branches), but the
comments in the kernel-yocto.bbclass could lead someone to think that
it was required.
This commit clearifies the comment to the following:
# We can fix up the kernel repository even if it wasn't a bare clone.
# If KMETA is defined, the branch must exist, but a machine branch
# can be missing since it may be created later by the tools.
[YOCTO #3422]
(From OE-Core rev: 421a2e2523a8f2c461479a1c0d44908cc1eaca6b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was needed when do_package for target recipes was target specific
however since it now isn't we can remove these stale references.
(From OE-Core rev: 1c54d8c3639659bc8cf8fa2786a1aa9ed785b723)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Calling split on the same expression, once per loop iteration is
inefficent and pointless, particularly in a function called by
every recipe during parsing.
(From OE-Core rev: 566c0e874fc1610f3f97737b5601ef22026c918a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this recently introduced exclusion, <multilib>-meta-toolchain-sdk
throws errors about missing DEPENDS that don't exist since it needs the
PROVIDES/DEPENDS remapping. This patch tweaks the class tests to fix
the errors.
(From OE-Core rev: 9cc18fe12bd8d1c73df291b4057aab6167ef6b16)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the change to WORKDIR layout, splutting PN and PV into two directories,
the debugsrc splutting code layout became suboptimal. This changes things to
include the information as it was before. Ideally this code would be written
to more generically support other layouts buts it not clear that the tools
would even support that right now so this is the best immediate fix.
(From OE-Core rev: 432cfbb403f0e864d1fad383c2bbb6f9bdb80770)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change means we have more flexibility about when to schedule the license
task and if it changes, we don't repackage everything (which is pointless).
(From OE-Core rev: ee1293446936c5444ece42b60e3ab94189b2fbc3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means some of the hacks we have to tell where the package name ends and
the version starts in the directory layout becomes obsolete, simplifying the
work of some of the cleanup scripts. It also makes the layout slightly more
intuitive to the user.
It does force a rebuild onto the user but it will reuse sstate successfully.
(From OE-Core rev: 05075cf3138d1c61f5cf4fe0e1a4587acc00c692)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the packaging functions now reference the pkgdata files written out during
do_package, we need to reference this dependency explicitly.
(From OE-Core rev: 1e9c9d164f8d12c8de205e04bf7c1dae3660f12a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a first attempt at logic to determine when a sstate dependency needs
to be installed and when it does not. Its a start at the logic and errs on the
side of caution, as it gets wider testing, we can refine the logic as needed.
This code should allow a significant performance speedup to certain workflows, for
example "bitbake xxx-image -c rootfs" will not populate the target sysroot.
(From OE-Core rev: b43faba37816817edc5240a139361d16e07c6131)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise when a recipe using DEPENDS=, the cmake-native dependency disappears.
(From OE-Core rev: 2b35539d96325d8e687451543d4f52f1a07bf1c6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check if package names match the [a-z0-9.+-]+ regular
expression
[YOCTO #3139]
(From OE-Core rev: 55dd271be1aee21e36d130359f4f21841623c425)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent preveeding sstate directory layout fixes made the code do what it
was originally intended to do, as can be clearly seen from the code.
Unfortunately this changed the contents and layout of the sstate files
themselves since the bug was leading to a directory prefix being missing.
This is now resulting in chaotic messages on the console since things
are getting confused with the two different layouts. The simplest way to
resolve this is to bump the version number, hence moving the new layout
into its own new namespace.
Its worth noting that whilst the failure messages are scary, the failure
mode is relatively harmless since it will just fall back to building the
data rather than installing from sstate.
Usually I'd give more notice of a change like this but under the
circumstances, I'm just going to push this in to resolve the failures
people are seeing. Initially I thought the problem was limited to
some of the -cross packages and therefore of low impact but that is
clearly not the case.
(From OE-Core rev: b53ea6687b6201c8c5ab5cb0d2a845ef7e7b2abe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix missing parameter to endswith and pass paths through normpath to remove
any duplicate "/" characters which would corrupt other calls like basename.
(From OE-Core rev: 172a74c540378149eec493c37c030e9f42f9603d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sstate-inputdirs and sstate-outputdirs don't match with ending '/'
characters, the manifest file can end up corrupted. This change
ensures the metadata is consistent in ending do_populate_root tasks
with this character to avoid manifest file corruption.
(From OE-Core rev: 3910eaf88d14904eef85b9e391387547df7fc54e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manifest file can become corrupted if sstate-inputdirs and sstate-outputdirs
don't have matching endings. This patch ensures that even if set incorrectly,
the code functions as intended, thereby handling manifest corruption safely.
(From OE-Core rev: 0109a3623a19f9ae289952a4f054e53c3eca4eaa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depending on the eglibc configuaration, the directory may or may not exist.
(From OE-Core rev: aa89b80a42297196c7bbba55fe2396ba1f98acc7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SDKMACHINE is not set, the toolchain will be built but the tarball
installer will not run. A better choice is to use SDK_ARCH because, even
if SDKMACHINE is not set, SDK_ARCH is set, by default, to BUILD_HOST.
(From OE-Core rev: b6d391903ae8baf902fa142a58533857ade6afd3)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnome-common is a build-only dependency so we should depend on the native
variant. This also resolves an (incorrect) GPLv3 license issue in gnome-common
at build-time.
This will also remove the pointless gnome-common-dev RRECOMMENDS in any -dev
package that uses gnomebase.
(From OE-Core rev: 6a4f394bc1280f5d58d928a2f7cff7cce4eb3b2b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not allow installer to continue if the installation machine architecture
does not match the intended SDK machine architecture.
[YOCTO: #3269]
(From OE-Core rev: 1f78e2c97f978f0f02e884870e7c495751f0802c)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
(From OE-Core rev: 9fbeab63315fef0dbcc91c5e7051665764758a6e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After recent changes to terminal.bbclass, variables like PATH were no longer
preserved within the devshell. This change ensures they are inherited into
the environment of devshell and PATH for example has the correct values.
(From OE-Core rev: f2dfc50bdf403719d40d04488245fd37655b5480)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If this isn't done, various terminals fail to launch correctly
with "No such file or directory" errors. This adds back the environment
manipulation removed in the addition of "custom" terminal command
support but shouldn't regress that additional functionality
(From OE-Core rev: 424d2339b462081010af6e7525a71f64d97ff05e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the previous version, tar extraction use the --strip-component
option with "4" hard coded value.
If we set another SDKPATH, with a different depth, the sdk installation
fails.
This patch computes the level from the SDKPATH value.
(From OE-Core rev: 7aee4e9438755c230e1399bd5226d6c8e7fcca31)
Signed-off-by: Fabien Proriol <fabien.proriol@jdsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Present the manifest file that contains the matches for
files being installed to a location that already contains
that file. This will help to determine which is the correct
recipe to fix when this occurs.
[YOCTO #3191]
(From OE-Core rev: 56268f6e4ed1fc11143173bb1717a8be78c728a5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The n32 architecture is odd, in that it's a mips64 ABI which happens
to be 32-bit. To handle this, we need something in the environment
which can be used to distinguish it. The obvious place to stash this
is the ABI suffix, so we use "n32" as an ABI suffix. This allows
a couple of improved checks:
1. In insane.bbclass, we can use "linux-gnun32" to discern that it's
okay for a mips64 binary to be a 32-bit binary in some cases.
2. In multilib_header, we can check for the n32 ABI, and use a distinct
value.
3. In siteinfo, add linux-gnun32 as a synonym for linux, similar to
what's done for linux-gnux32, and tell the mips*-linux-gnun32 variants
to pick up the corresponding mips-linux site configs.
Note that the multilib header wrapper already has n32 hooks in it, there
was just nothing creating -n32 header variants.
(From OE-Core rev: c8e8e8ba22eaa335ac72f0e5b317f804035133e2)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the host toolchain list, for cross-canadian toolchains, to ensure
that all of the supported multilibs are built and installed. This
dynamically generates the dependnecy set based on the current multilib
configuration.
(From OE-Core rev: 54bc658416ea5679bbfdc76e3ef8767c0a15211c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When multilibs are enabled, there will be more then one environment
file created. We need to be sure to process each environment file.
The next function can simply use the last environment file processed
to get the magic value(s) that it requires.
(From OE-Core rev: 6f0537c835c35dcff5154de0bec066ec3e71a4f8)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Crosssdk packages are not actually multilib packages, so treat them
the same as other nativesdk packages in the multilib, base, and
classextend components.
(From OE-Core rev: 15834451525453e0f7ceac25d4f98117f1825f37)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for the generation of cross-canadian packages.
Each cross-canadian package has:
PN = "pkg-cross-canadian-${TRANSLATED_TARGET_ARCH}"
in order for that to be evaluated properly with multilibs enabled, it was
necessary to detect both the presence of the cross-canadian packages and
then update the vars using the OVERRIDE for the multilib. Additional checks
were made to ensure that any dependency that sais "cross-canadian" did not
get prefixed with the MLPREFIX.
Also, make sure that even when building multilib cross-canadian packages,
we only use the single SDK PACKAGE_ARCH, we don't want or need variants.
(From OE-Core rev: 132a182e2f6c330aa645de42c1aeb386e43bddd3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There maybe no rpm postinst script (e.g., core-image-minimal), then the
"*" is not expanded, and there would be error:
head: cannot open `rpm-postinsts/*' for reading: No such file or directory
Check whether it exists or not will fix the problem.
[YOCTO #3172]
(From OE-Core rev: 966c72e00c8d378d7d189f0e4b626f6782d23a25)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used by:
openembedded-core/meta/recipes-sato/matchbox-keyboard/matchbox-keyboard_git.bb
meta-openembedded/meta-oe/recipes-support/maliit/maliit-framework_git.bb
(From OE-Core rev: c67f64e5846bb2a6774e61a4f3719c5f82fc3bd8)
Signed-off-by: Samuel Stirtzel <s.stirtzel@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While removing packaging data files in rootfs_ipk_do_rootfs use the
remove_packaging_data_files function. By using this function we ensure
that /var/lib/opkg directory is created. opkg needs this directory to
create lock files.
(From OE-Core rev: 1f3300766b827ed73daaa01572017775305105b2)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that xserver provides driver ABI names, all drivers should depend on the ABI
version that they have been built against.
All drivers that include xorg-driver-input.inc or xorg-driver-video.inc will get
these automatically, so this should only impact binary drivers.
(From OE-Core rev: 800b256390b22c3d3d8d6a69f6fb668376a5030b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We seem to be mostly installing modules into vendor_perl nowadays.
Make sure that the .debug data from there is captured appropriately.
Also, expand ${PERLLIBDIRS} at the point of assignment so we don't
call the python again and again.
[RP: Fixup to whitespace]
(From OE-Core rev: ed7690bf5cc964b5cee55f5ef13c10c75d8e3463)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When copying the source files needed for the -dbg package, use hardlinks
where possible. This saves some disk space and hence helps performance
of the builds.
(From OE-Core rev: 6775feb9fe935ab01fd9cae2b2d3fce5824a9a72)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The symlink from uImage-3... to uImage is not created at image creation
time and not properly update on kernel upgrades. This is fixed by removing
the chdir. The other users of update-alternative do not change the directory
before calling it.
(From OE-Core rev: c77ca9ee901468c93570b5264b226f7d17a41c16)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, we'd rerun packaging for every machine since this variable contains
a machine specific component.
(From OE-Core rev: 61131828c59178c923b3d5b5fcacf0dbcba275a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that PACKAGES_DYNAMIC is more standardised, starting with ^ anchors,
the variable manipulations performed by clsextend for multilib don't work.
This patch at least improves it to hack around the problem and enable
mulitlib builds to work again. If this code doesn't do the right thing, the
recipe is free to override the variable with the correct multilib case.
(From OE-Core rev: 593faec6e0155bdd7a43ee84c24de8ee20287681)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now do_package isn't machine specific, we're only left with do_populate_sysroot as a
machine specific task. This change marks only the machine specific manifests as machine
specific, defaulting to PACKAGE_ARCH for everything else.
This means we do less work where there are multiple machines using the same
core package architecture and we can start to clean up the sstate duplicate files
whitelist.
(From OE-Core rev: febeaf3d1b8917b660c7279b008d8b03337568e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, do_package is machine specific since the shlibs data is installed
into each machine specific sysroot. This change moves the shlibs data to the
pkgdata structure, at the expense of having to iterate over a set of shlibs
directories instead of a single one.
It turns out this isn't any particular hardship for the code and as a result,
do_package stops being machine specific leading to optimisations for builds
that use a common PACKAGE_ARCH.
(From OE-Core rev: cc088489d70fb27d460c3dbe35d6ea382123c134)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variables correspond to the PACKAGE_ARCH list combined with the TARGET_VENDOR
and TARGET_OS values. These can be used to traverse the pkgdata structure.
Setting these once in base.bbclass stops pkgdata needing to recalculate the values
and is also useful for the reworked shlibs code in a patch that will follow this.
(From OE-Core rev: f91322edc8b9f2a5906f3908bde2508ae97f2816)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* kernel-modules is always added to PACKAGES later in python code and
needed to be defined as PACKAGES_DYNAMIC
* add it to PACKAGES directly and set
ALLOW_EMPTY_kernel-modules
FILES_kernel-modules
DESCRIPTION_kernel-modules
outside populate_packages_prepend like for other packages and set only
RDEPENDS_kernel-modules from python code
(From OE-Core rev: 0884bdbbf39f2b3a8a342918812f29ddcd3b1e6f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
(From OE-Core rev: 2f3ebdfa5f42dae51063b043cc4b0fbe20b40064)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The compilation routine for the kernel has an explicit call to
build version.h, which works fine for most kernels, but the
location of it has recently changes.
commit d183e6f5 [UAPI: Move linux/version.h]
commit 10b63956 [UAPI: Plumb the UAPI Kbuilds into the user
header installation and checking]
moves the file to include/generated/linux/version.h and then to
include/generated/uapi/linux/version.h.
As a result kernel builds of 3.7 or bisection builds of intermediate
kernel commits will fail with:
make[2]: *** No rule to make target `include/linux/version.h'. Stop.
Making the explicit version.h build conditional on the version, or
via a file test would fix the problem, but it introduces some complexity
to the build.
Even without an explicit call to build version.h, it is always produced
by the kernel build, so it can simply be removed.
This extra make line was originally so that the kernel version could be
determined, so that then different instructions could be executed depending
on whether it was a 2.4 or 2.6 kernel. Since we no longer support 2.4, this
code is no longer needed.
[YOCTO: #3293]
(From OE-Core rev: 4cb20fa89e571ffbc448c579a758db0b9074acf4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For builds that don't use gettext, config.rpath may not exist in the target
datadir. This change uses the native directory where it will always
be present due to gettext-minimal-native (which allows us to autoreconf
recipes using gettext even if we don't have gettext built).
(From OE-Core rev: 0ea24447842e6b76ccfee0881f557e1a82e89ef1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the link is absolute then we might end up reading from a host binary
or a nonexistent path, neither of which will produce useful results and
may result in objdump failure and python backtrace spew. If the link
does point to a binary within the installation root then we will scan the
pointed-to file at some point anyway so there is no need to do it again.
(From OE-Core rev: 91769af1c1175ac9bb43d16d05fb1c8736dd9287)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various different QA checks are based on essentially the same data from
the ELF program headers. Calling objdump to extract it repeatedly is
inefficient, particularly if the shell is involved. Instead, let's
cache the output from objdump inside the qa.elf object and allow it to
be reused by multiple tests.
Also, using objdump instead of scanelf to check for bad RPATHs (in the
same way that the useless-rpaths check was doing already) allows the
dependency on pax-utils-native to be dropped.
(From OE-Core rev: bf19eeb9f65e91bf2b5d89e7c0b099c55d7c15ff)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise it will fail if these two directories are not the same.
(From OE-Core rev: 491823fdc65d124093f1fed5a56173917443e1d6)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext m4 macros don't use the usual versioning/serial mechanism used by
aclocal. It therefore won't update them over and above any local version of
the macro. Equally, we don't run gettextize due to it doing slightly crazy
things to the build.
When we put the aclocal directory as a -I option to aclocal, if this was
found first compared to any recipe provided macros, the correct version
of the gettext macro would still "win". With the switch so correctly override
the system directory, older recipe provided macros may get used.
This patch manually removes the problematic m4 macros in the case we're using
gettext and need to use the correct m4 macros.
This patch also always ensures the gettext manipulations happen, even in the
-native case since missing or stale gettext files could cause build failures.
(From OE-Core rev: e9645d2bbeabaa5251d49edd659ab320fd66d0ee)
(From OE-Core rev: 841ea3c1c18e50e77fccbd5f44d6a79a50913b67)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous steps taken to address races over the aclocal macro directory and the removal
of files hasn't been sufficient since aclocal still looks at that directory as part of its
default search path. This patch passes the aclocal-copy directory into aclocal as its system
directory, removing any chance of it accessing the original aclocal directory.
Hopefully this should therefore fix the race issues once and for all.
In order to do this, cp-noerror needs to not error if the directory already exists.
Its also been noticed that aclocal defaults to using STAGING_DATADIR_NATIVE even when
building for the target. Only using the target directory would cause errors such as
missing pkgconfig macros (since we only depend on pkgconfig-native, not pkgconfig).
This patch processes both sets of macros maintaining existing behaviour. At a future
date we could look into potentially optimsing this.
[YOCTO #3216]
(From OE-Core rev: ad29b331e0d61708e68ef772cdb19154956fa67e)
(From OE-Core rev: f362cc419e5a480acd16c71c802636dbedc932d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The network tests in sanity.bbclass can now be trigerred explicitly
by firing the NetworkTest event. This is part of the fix for bug #3026.
[YOCTO #3026]
(From OE-Core rev: f1f43d55dbb020a0145c58731d4259fd906d9d1e)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've noticed failures on the project autobuilders where a shared sstate
directory is used across multiple builders and the clocks become skewed.
Most of the time this causes harmless building but if this happens where
an environment is changed (make install vs make in qt4-x11-free for example),
the build can fail.
This avoids modification times in the future and should make builds safer
in shared environments sstate was designed for.
(From OE-Core rev: 8f1bdb4f4afd7f5f4c121be8ba82f4675f73e300)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This tests for /usr/libexec as we are moving things to /lib/.
the test is ignored if the distro defaults to /usr/libexec.
Currently this test will be disabled by default since the current
value of ${libexecdir} is "/usr/libexec". Also this tests needs
to be enabled in the WARN_QA list.
[YOCTO #2915]
(From OE-Core rev: 4c60c2779dde6962f342f9c9b61713cf2d3a564c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you wish to change the install/unpack method of the sdk, this can now be done by making
your own create_shar method, and setting a SDK_PACKAGING_FUNC variable to your
new create_shar function.
(From OE-Core rev: 3955c8eced352226bb4c9ceb710dbe02474b9024)
Signed-off-by: Thomas Kristensen <thkriste@cisco.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since e3d7890cac or so, base.bbclass has
considered invalid LICENSE settings to be a fatal error. This means we
will never see them so there is no point checking for that.
(From OE-Core rev: e2d71503847f72f55666143a2a320925838fd26f)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's sometimes useful to have this function available to recipes which
don't wish to use module.bbclass for whatever reason.
(From OE-Core rev: 7632b44e7f487180811d47fbe9c29aa8e58868a2)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update-modules mechanism is something of a historical relic and it isn't
entirely clear that it has a great deal of value nowadays. Also, it causes a
problem when building a read-only rootfs since update-modules itself refuses
to configure offline.
Allow DISTROs to circumvent this whole thing by declaring (via DISTRO_FEATURES)
that they don't wish to use update-modules. This is backfilled for existing
distributions and will have to be marked as CONSIDERED by those who actually
don't want it.
(From OE-Core rev: 14bf8ed115453077b4d4042b4b70ed6b3bca2a9f)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There seems to be no benefit in having them be different and this
appears to cause a certain amount of confusion about paths for
the native modules.
(From OE-Core rev: 3926a45a26c2d23d9c2fc9c3956f780f607ec7a4)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just because a recipe uses pkgconfig, it doesn't mean that it's -dev
package should RDEPENDS on pkgconfig. I can understand the thinking
that lead to this but it makes sense to be able to install the package
when pkgconfig hasn't been built.
Currently you can also get failures where pkgconfig wasn't built yet
a -dev package is included that depends on it leading to rootfs failures.
I considered making this a RRECOMMENDS but it should probably be an
RSUGGESTS at best given the tenuous pkgconfig requirement any given
-dev package has.
(From OE-Core rev: 8f41b69578eef5ea750e8f93dcd9d37375ce7d88)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The virtual-locale-* packages are provided by libc which may or
may not have a matching locale for any given recipes's provided locales.
Certainly, we shouldn't get a failure if the locale package isn't
available.
This patch therefore makes the dependency optional rather than
required, allowing the locale packages in question to install. This
resolves errors like:
virtual-locale-eo is needed by bash-locale-eo-4.2-r5.i586
virtual-locale-en+boldquot is needed by bash-locale-en+boldquot-4.2-r5.i586
virtual-locale-en+quot is needed by bash-locale-en+quot-4.2-r5.i586
(From OE-Core rev: 2be67f95abaa7e8655a1ca8f4ffe66b3e099a650)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The names used to generate the binary-localdata packages need to match the location
the dependencies are added. In one case the dash replacement is made, in the other it
is not leading to packages which cannot be installed:
eglibc-binary-localedata-af-za.iso88591 is needed by locale-base-af-za.iso-8859-1-2.16-r22.i586
eglibc-binary-localedata-cs-cz.iso88592 is needed by locale-base-cs-cz.iso-8859-2-2.16-r22.i586
eglibc-binary-localedata-ru-ru.koi8r is needed by locale-base-ru-ru.koi8-r-2.16-r22.i586
eglibc-binary-localedata-pl-pl.iso88592 is needed by locale-base-pl-pl.iso-8859-2-2.16-r22.i586
eglibc-binary-localedata-hu-hu.iso88592 is needed by locale-base-hu-hu.iso-8859-2-2.16-r22.i586
eglibc-binary-localedata-de-at+euro.iso885915 is needed by locale-base-de-at+euro.iso-8859-15-2.16-r22.i586
eglibc-binary-localedata-sv-fi.iso88591 is needed by locale-base-sv-fi.iso-8859-1-2.16-r22.i586
This fixes things so the names are consistent.
(From OE-Core rev: 17e1bfe2b1260add9749b5ff73c72d57c0215fdc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also ensure that we always cleanup the temporary install manifest files,
some of them will cause problems if they exist in multiple install
attempts.
Finally verify that the lists remain uniquely sorted otherwise the
complementary install may install the same files numerous times,
triggering a failure.
(From OE-Core rev: 4f2a290cbcc6c21afbb2a6e6148efdef4d135b41)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids errors where gcc/binutils get installed to the native sysroot
in the same location for multiple package architectures. Ultimately making
these native recipes with ${PACKAGE_ARCH} appended to PN will resolve this
but hide the warnings until this gets sorted out.
Also hide the python and docbook catalog warnings since they're known about,
nothing to worry about and we'll aim to clean them up properly in the 1.4 cycle.
(From OE-Core rev: 5bae58a5b59c04d8947f4842f19837a914c29b52)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, path components like // could break comparisions with the whitelist leading
to warnings being displayed to the user unintentionally.
(From OE-Core rev: d3c46ca56fab2f07bf16b61514f30765543a8747)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some packages use M4 variable from environment and sometimes
its hardcoded to /usr/bin/m4 if not found in environment. Lets
define it such that it is picked from path
(From OE-Core rev: 06c5593d15f206458b9a5b45ed1229abfee16e95)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for the RPATHs in 32bit toolchain binaries to be relocated
properly, chrpath >=0.14 is needed.
[YOCTO #3161]
[YOCTO #3201]
(From OE-Core rev: 71c71b972100803d33fbb062a237e8a15167387b)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the distro check functions for the change of nativesdk
being a suffix to a prefix. Also added crosssdk as another
case for converting to PN for matching in the distro_tracking
(From OE-Core rev: ae9dbd0e1e26ba2b35cbd08ec731aee62adedc23)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to iterate over the dictionary pulling out the values, not take the top
level keys. If we don't do this, we end up with dependencies on the values of
PACKAGES, not library dependencies.
(From OE-Core rev: 7219bca11f554fbe2ed30f1537491987d65e9316)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, circular dependencies are found when attempting to build
multilib versions of qt4 (or bitbake world in a multilib enabled build).
(From OE-Core rev: b2e8cc5ae227656211fb7f32260e7dc4e2fb556e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Versions earlier than 0.14 can't cope with 32 bit binaries on a 64 bit
system and vice versa. This results in problems for certain SDKMACHINE
combinations on certain hosts. By ensuring we build
chrpath-replacement-native we avoid this problems and the binaries work
correctly.
[YOCTO #3161]
[YOCTO #3201]
(From OE-Core rev: f89bced26de055817100d0b0e03094b031fcfd48)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This converts the option to maintain the existing behaviour unless the option is
specified. We do specify the option during the builds themselves to ensure what
the users expects is built.
(From OE-Core rev: 0cc479699fe885049625d54c712b500c1b719e75)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test for network error in sanity.bbclass was negated.
(From OE-Core rev: 9fcd0866f0e30a50182434f6bcae13bf9575807f)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb.utils.explode_dep_versions function has issues where dependency information
can be lost. The API doesn't support maintaining the correct information so this
changes to use a new function which correctly handles the data.
This patch also fixes various points in the code to ensure that we do not have any
duplicates in things that use explode_dep_versions.
A new sanity test to test the contents of the R* variables is also added.
[Some changes from Mark Hatle <mark.hatle@windriver.com>]
(From OE-Core rev: 16a892431d0c0d03f8b561b92909cf2f11af4918)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
People keep copying this code and its confusing and unnecessary. Remove the
bad examples to try and stop this happening.
(From OE-Core rev: 48aa4b00cfb7f01195c6d20b7ba660715fe792ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In deb and ipk, < means <=, while > means >=... there is a different
operator << and >> that means < and >, so we map them when constructing
the packages.
(From OE-Core rev: bbcc78d8ff03725ce5b3b65ce24025c3da45f2ab)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the STAGING_DIR_KERNEL is set in the multilib.conf, then it may be
set incorrected. The evaluation happens before TMPDIR and LIBC are
defined in other components.
Moving the definition process to the multilib.bbclass ensures that
everything has been loaded before it is set.
(From OE-Core rev: 6bd87edc383b40e300b0ef4bf851c39b698305cd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building target packages, it used to be enought to check for PN == BPN, however
with the multilib configurations, this can lead to subtle errors. Change instances
of PN == BPN, to ${CLASSOVERRIDE} == 'class-target'.
(From OE-Core rev: acc988272b4e74a9ad1e6da5af5b2d208584197b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures consistent build results and avoids build failures when compiler flags
change for example.
(From OE-Core rev: a5ff8396cad130f809f8f8da49bb38e6f80f923c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_package is a machine specific task at the moment due to packagedata. This means
do_package tasks and their dependencies rerun between different machines
with various duplicate file installations. There are plans to fix this but they're
too invasive before release.
This patch relaxes the whitelist for sstate duplicate file detection to account
for this. Post-release, we re-enable stricter settings once do_package is not
machine specific.
(From OE-Core rev: c858259ce1881c6284f1fc2790c225c81e4a751e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This requires the changes to bitbake.conf that allow parsing of
license.conf.
As we should now be parsing license.conf, we can move some globals
out of license.bblcass and into the conf file.
(From OE-Core rev: 03e6a7cd27ed109a011fac09cf04412f87f31c3a)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable mentioned in license.conf is LICENSE_PATH. The variable
used in license.bbclass is LICENSE_DIR. Conforming to what is in
license.conf
(From OE-Core rev: c6e13d9cd26d016ab06e7447b307d413e1331aa0)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we fail a network test, a special flag is set in the SanityChekFailed
event. This helps Hob identify the network error properly and display
a special message to the user.
[YOCTO #3025]
(From OE-Core rev: 7877c4344db89237bba5f9a03342bfd9a03aebbf)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- add check_bblayers_conf bitbake function which does the bblayers.conf
v4 -> v5 update if necessary (every layer should make its specific
bblayers.conf upgrades appending to the check_bblayers_conf function)
- we ask the user to re-run bitbake because we can't trigger reparsing
without being invasive
[YOCTO #3082]
(From OE-Core rev: 03ad4edace5db9c6e15ca776d06d20b7d4e42afc)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit aa66ef6598c84231577d139ec7be413e73fac2b1 since
bdwgc-native fails to build after it. Anything which runs with a
sub-configure will fail after this change. It therefore needs
rethinking.
(From OE-Core rev: f95a9e2c292a1551861220270838cf1eaaba85b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix autotools.bbclass to use relative paths for acpaths instead of
absolute ones. Since absolute paths may cause potential autoreconf
error like:
Can't exec "/bin/sh": Argument list too long ...
This error occurs while building coreutils with long TMPDIR, because
it has bunch of m4 files need to be expanded.
[YOCTO #2766]
(From OE-Core rev: aa66ef6598c84231577d139ec7be413e73fac2b1)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on the previous commit 604d46c686d06d62d5a07b9c7f4fa170f99307d8
(Convert tab indentation in python functions into four-space), the
cml.bbclass was not converted, and in order to properly extend it
with external bbappend's it needs to be converted.
(From OE-Core rev: e4c1c37bb37e9eba635bc0a9308ab593abd299ec)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The platform and platform_extra will be written to /etc/rpm/platform,
the rpm's arch has changed the "-" to "_", so the value in platform
should also be updated.
[YOCTO #3159]
(From OE-Core rev: 9880a5261ca509c69efbafa27cddd9b2b8ca08f0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no initial_solution.manifest in the second build when
incremental rpm image generation, since the initial solution has been
skipped. So we should check it before cat it.
[YOCTO #3128]
(From OE-Core rev: ad17fa82a481ab3c9f17a8338ebad1eb07c0f9d8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ipk_log_check uses a case-sensitive grep (which is correct) when deciding
whether there were any errors or not. But if it decides that there were, it
then uses a case-insensitive grep to display them. This results in a large
amount of irrelevant and confusing output which makes it hard to see the real
errors amongst the noise.
Suppress this by removing the unwanted -i.
(From OE-Core rev: 57dcacbd6f35ae2d6b505f044bbefad35da66959)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added to allow detection of duplicate files being installed by sstate.
There is a much simpler way, just check if the file already exists. This
effectively uses the kernel VFS as the cache which is much more efficient.
This resolves a significant performance bottleneck (lock contention on a
single file) when running builds that are just being generated from sstate
cache files.
(From OE-Core rev: 603daf343ad3f18c8adb799e3625ae2a18d94f56)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current multilib search path code for packagedata is flawed since it
doesn't correctly handle changes in the TARGET_VENDOR/TARGET_OS that
multilib may make. This patch enhances the code to correctly build the
search paths so multilib packagedata is found correctly.
(From OE-Core rev: f50c5d36b2da9b36d56d95a7d89404509a1a3e9b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to split this variable before using it. Otherwise a single "/"
character in the list whitelists every overlapping sysroot file which
was not the intention making the whole thing useless.
We'll start seeing warnings about overlapping files now this is working
correctly after this patch.
(From OE-Core rev: 9e31c748327e92b809330f4ad7b6aaecb2edf559)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the hardcoding of ${libdir}/locale which is all over the place,
and will facilitate use of ${exec_prefix}/lib/locale instead of
${libdir}/locale.
This doesn't actually change any output at this time. Verified this with
buildhistory against the packages produced from core-image-base.
(From OE-Core rev: b744f4cc2912334b8493a89525fd02af8e9b8edf)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Passing the data store will be needed for firing a custom event
for the screen class.
(From OE-Core rev: 5ccff8d44626bfd3d1af2a7f81f0567997277809)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If all postinsts have already been run during rootfs construction then
there's no point in having run-postinsts in the installed system.
Clean it up at the same time that update-rc.d and suchlike are being
removed.
(From OE-Core rev: b260cf9fbeb6f029c1ce45e77edd03968caa8288)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It isn't supported to mix multilib and nativesdk in the same target, so
explicitly skip multilib processing if nativesdk is inherited. As a
bonus this fixes a bunch of related "missing file" warnings from the
file checksum code during parsing because BPN was not correctly stripped
for these targets.
Second half of the fix for [YOCTO #3146].
(From OE-Core rev: d9a1eb5054d487affb94431374a9cb1a735e2122)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need MLPREFIX to be set so that oe.utils.prune_suffix() (as used for
the value of BPN) can derive the bare name from the multilib-extended
name for image recipes. BPN being set correctly avoids missing file
warnings during parse from the file checksum code for (unusual) images
that set SRC_URI, such as build-appliance-image.
First half of the fix for [YOCTO #3146].
(From OE-Core rev: ddec9a1b45159c75e97e92abe9a940268acd84b2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For reasons that are now shrouded in obscurity, autotools.bbclass
has long contained a special heuristic to avoid attempting to run
autoreconf when building autoconf or automake themselves. However,
the wildcard test against PN which is used there is problematic when
trying to build another package whose name happens to start with
"autoconf", and in any case it is silly to do this test at runtime
for every package. The individual recipes for autoconf and automake
can just as easily suppress the behaviour that they don't want by
providing a custom do_configure() method which just runs configure.
(From OE-Core rev: a87db6f8dea71cbb7ead9285ff8af0e28cf75604)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define an ALL_QA variable which can be used to determine which tests to
run. Improve the libdir test to work in the case it is set to raise an
error rather than a warning.
(From OE-Core rev: 069992a502658e8e44b870601e2e189cd9596ec9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check in ${PKGD} for libraries in wrong locations.
Trigger a warning if so.
Eg. Catch recipe installing /lib/bar.so when ${base_libdir}="lib32"
or installing in /usr/lib64 when ${libdir}="/usr/lib"
[Yocto #2038]
(From OE-Core rev: 534fa3a55de19f249583207aaeec58fec8154a1d)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch will allow one to run the installer from another directory
than the one where it's actually located.
Suppose the installer is in /home/user/test/my/sdk and the current
directory is in a different place. With this patch, one can run the
installer like this:
$ sh ~/test/my/sdk/poky-eglibc-x86_64-arm-toolchain-gmae-1.2+snapshot-20120920.sh
[YOCTO #3135]
(From OE-Core rev: 3c7aac33cb63dc63b989db4e9d7389a7f4d3c18d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory usr/libexec/ in the SDK sysroot contains the default
symlinks to the toolchain binaries and these, too, need to point to the
correct toolchain path.
[YOCTO #3090]
(From OE-Core rev: 6e4923c0c9b218271fd44d78df9987b5cabb1c03)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SDK installation scripts should not canonicalize symlinked
directories because the entire relocation would be done to the directory
to which the symlink points. Instead, if the installation is a symlink,
use that path to relocate the binaries.
For example, if we have the following symlink: /opt/sdk -> ~/my/test/sdk
the binaries will be relocated to /opt/sdk not ~/my/test/sdk as it is
done now.
[YOCTO #3102]
(From OE-Core rev: 9e6a25e2e9a7f37c3baa0b2949a43ac4127868da)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes the dependency on a seperate binary which we
don't seem to have. So, use mksquashfs's -comp lzma to
replace that functionality
[YOCTO #3126]
(From OE-Core rev: 8e82713724dfcb40f2ae24a166ec94f50f8b4cd0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RPM does not name it's packages with the Multilib prefix,
but the rootfs_rpm class keeps track of the Multilib prefixs
in a list. Use that list to re-attach the prefix for use with
the license bbclass, buildhistory bbclass will also use this
and make it more accurate between multilib and non-multilib.
Use the embedded "Platform" information to ensure we get all
the correct matching.
(From OE-Core rev: f72abd80b0cc9d27aad2e31ecb548b4ab0fd8f67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Use mkdtemp for generating temp dir names
- Use bb.utils.remove for removing temp dirs
- Add comment for explaining the "patch" workaround
[YOCTO #3070]
(From OE-Core rev: fbe9fc4d5ece1e66b03b4c4bce9b7ffad3b5b138)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was reported that the kernel configuration checks for custom yocto
kernels had the following output:
NOTE: validating kernel configuration
grep: /meta-series: No such file or directory
grep: /meta-series: No such file or directory
WARNING: Can't find any BSP hardware or required configuration fragments.
WARNING: Looked at //cfg///hdw_frags.txt and //cfg///required_frags.txt in directory: //cfg//
NOTE: Tasks Summary: Attempted 375 tasks of which 367 didn't need to be rerun and all succeeded.
which is not inspire confidence in the output of the process.
Completely inhibiting the check is one option to remove the messages,
but that removes the ability see output, which can help move users to
a better or more fully configured linux-yocto based kernel.
To fix this, we have to ensure that the path to the meta-series is
always valid, and that the tools can deal with not all files existing
in the audit directory.
Since custom yocto kernels do not set KMETA (they don't have a meta branch),
we ensure that a default of 'meta' is passed to the audit ('meta' is always
valid), and that kconf_check itself can deal with an incomplete set of
input audit files.
The net result is output like this (using a defconfig with invalid options
for the kernel being built):
NOTE: validating kernel configuration
This BSP sets 19 invalid/obsolete kernel options.
These config options are not offered anywhere within this kernel.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/invalid.cfg
There were 1 instances of config fragment errors.
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/fragment_errors.txt
The full list can be found in your kernel src dir at:
meta/cfg/standard/qemux86/missing_required.cfg
(From OE-Core rev: 4d1b7dae063ee4c35c426306d0e22f11ce112c72)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT before checking if
base_size is greater then IMAGE_ROOTFS_SIZE, we can end up adding an
unaligned value to IMAGE_ROOTFS_SIZE. Obviously, if
IMAGE_ROOTFS_EXTRA_SPACE was overwritten with an unaligned value. So
let's add the round up code after the base_size calculus and it's
comparison.
(From OE-Core rev: 726c1617077da6b49606ac1a2cae64d2d02e6214)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We must use one TMPDIR per process (/tmp/${PID}) so that the patching
processes don't generate the same temp file name (the "patch" program
uses the TMPDIR environment variable for deciding where to create the
temp files).
[YOCTO #3070]
(From OE-Core rev: 16dbf505c4fdd9fe1820d950ab05c8ea99ad7505)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, settle all found licenses into one line and report warning
about missing licenses loudly.
(From OE-Core rev: f015a9eb8265c485da0b20009ba72119035599b1)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trivial change, do not cut off plus symbol from license name, otherwise
information about package license is corrupted.
(From OE-Core rev: ba53de38e96833ea82ddd0f1e336cd7ddfa0c2d1)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trivial change, process LICENSE_${pkg} and LICENSE values. This fixes multiple
cases, when license is not specified at all in license.manifest
(From OE-Core rev: 8fd734e6f9159921d0d148c4d5c0fa37c882b21a)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, which improves code perception. Also check for locale
packages firstly, this shall improve performance a little.
(From OE-Core rev: 100e457de4b223defb1a844d3b85af812caf2f79)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cosmetic change, saves space and reduces code line length.
(From OE-Core rev: 0ac50f848cf0f897333cff9340976519fc95fdc4)
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately whilst rerunning configure and make against a project will mostly
work there are situations where it does not correctly do the right thing.
In particular, eglibc and gcc will fail out with errors where settings
do not match a previously built configuration. It could be argued they are
broken but the situation is what it is. There is the possibility of more subtle
errors too.
This patch adds removal of the build directory (${B}) when configure is
rerunning, the sstate checksum for do_configure has changed and ${S} != ${B}.
We could simply use a stamp but saving out the previous configuration checksum
adds some data at no real overhead.
If we find there are things where we want to disable this behaviour with
CONFIGURESTAMPFILE = "" in the recipe, or users could disable it globally.
[YOCTO #2774]
[YOCTO #2848]
This is particularly helpful for eglibc and gcc which use split builds by default and
are a particular source of reconfigure type problems.
(From OE-Core rev: f15f61af77cc4e52a037f509f8e49e1ea530cf35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can now rely upon the minimum BitBake version having the
SanityCheckFailed event, so remove the code to handle if this is not
there.
(From OE-Core rev: ba17572c9c11efb45a92ba97914ce1f6d84002c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there is no valid machine configuration it's almost guaranteed that
the tune checks will fail, so just suppress them in that case.
(From OE-Core rev: 629c585e687cda9290efcffd18dd92fdf16009ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When called with the complementary install option, the first step is to
backup the install manifest so that we can avoid installing items previously
installed. However, this backup process skipped the initial_install portion
of the manifest, causing early install items like libc6, bash, and base-files
to be installed a second time.
Fix this by cating the files to original_solution. This is done as an append to
allow multiple calls to package_install_internal_rpm to work.
(From OE-Core rev: af9fd7566a5de4716a202922f5eabb13a412f2fb)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the image.bbclass is called with arguments, and these arguments are not
"populate_sdk", they will be passed in as the expected GLOBS.
This enables external components and scripting to use the
rootfs_install_complementary code.
(From OE-Core rev: f44c5f227a170290f567d0a0a24baaa870048788)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Appending to EXTRA_SSTATEMAPS is better than just hardcoding a value. Also
add a comment about why this is necessary.
(From OE-Core rev: d4f4a57b8d564d57256017d937ed2eabf94c36ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using a rather error-prone method of looking for output
package files in order to determine if a package got created, use the
.packaged file within pkgdata.
This fixes two separate issues:
* Some packages apparently not being found by this code e.g. all
apm/apmd packages when using ipk packaging.
* Buggy implementation of this checking code which triggered an
exception during the event handler if PKGV was overridden on a
per-package basis (as it is with external-sourcery-toolchain), which
blocked Hob from completing parsing at 99% - fixes [YOCTO #2651].
(From OE-Core rev: 48169c6bc44c546cecaa06207b6c36da558b81f7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows root to login over ssh with an empty password just like
dropbear when the debug-tweaks are enabled, it's important to disable
debug-tweaks for a production system as this will leave open a security
hole!
Thanks to Marc for the settings.
Cc: Marc Ferland <marc.ferland@gmail.com>
[Yocto #3078]
(From OE-Core rev: 13e6aa8bba6ab1ebba1efa23f94af379a8fcb6a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Check ${target_rootfs}/etc/passwd rather than
${target_rootfs}${rpmlibdir} to make sure that it has been previously
installed.
* Remove the "--nodeps" when incremental image generation, it should
take care of the dependencies. Still use "--replacefiles --replacepkgs" in
case there are conflicts.
[YOCTO #3047]
(From OE-Core rev: 2b3df2ec7979a49842df172be442a8794fe68fff)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used for the binary package recipe, it's been suggested that it
would be a useful feature to be able to easily take an RPM or similar
containing a software binary from a 3rd party software vendor and
integrate it into an image created by the build system.
* Brief introduction
- The binary pkg can be .rpm, .deb, .ipk and other formats which can
be unpacked by bitbake fetcher.
- Let bitbake unpack the bianry package, just like unpack the source
package.
- Skip the do_configure and do_compile.
- Install the files to ${D}
- Other steps are similar to the source package's recipe.
* Note:
- The "subdir" parameter in the SRC_URI is useful for the binary
package recipe, so I added an example in the comment.
- I have sent a patch to bitbake-devel mailing list to support
unpack the .rpm, .ipk, and .deb files.
[YOCTO #1592]
(From OE-Core rev: 7037f52909b8226d2afed4ac73c902d410afc112)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm can't use the "-" as the arch, which causes problem, e.g., when
MACHINE = "beagleboard":
* The arch should be armv7a-vfp-neon, but rpm only takes the armv7a,
this is incorrect since it is mixed with real arch armv7a.
* The nativesdk's arch should be i686-nativesdk (or x86_64-nativesdk),
but rpm only takes the i686 (or x86_64), this in incorrect since it is
mixed with the arch i686 (or x86_64).
Replace "-" with "_" when rpm package and the rootfs generation would
fix the problem, I think this is fine since it doesn't change the tune's
arch, the package manager doesn't care about the arch's name, but it
needs a unify arch system to avoid confusing. This is similar to what we
have done on the deb which fixed the arch i486, i586 and so on to i386.
[YOCTO #2328]
(From OE-Core rev: fc985f511da86400e4fa7d17555216c12eb51666)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This mirror entry which maps to itself plus a slash, if matched, put the
fetcher into a circular loop until the stack space is exhausted. A patch
has been sent to fix this issue in BitBake, but we should remove the
bogus entry as well.
(Note that this entry does not actually trigger the issue with current
master because the gnutls recipe now uses GNU_MIRROR instead of
ftp.gnutls.org, thus the bogus mirror entry is not matched.)
(From OE-Core rev: 0de1827a9601143b090f751ea702fdb65a936b77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new variable "IMAGE_EXTENSION_live" for Hob to map image type
"live" with real image file extension names.
This is for Hob to remove the hard-coded maps.
(From OE-Core rev: fe0973df7c72b1acec7feae03a4e13c1f49c8b1f)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure this listing is complete. (Comment change only.)
(From OE-Core rev: f9df0be3790ca837e43c41633d17e6ee851cb01d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As nothing in oe-core uses gsettings, it wasn't noticed that the whitespace is
wrong.
(From OE-Core rev: 1c2afda021f7abf88bc08400beba53c603912382)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix borrowed from OE-Classic. This should fix build failures during
do_configure of Qt applications with the p1022ds machine from
meta-fsl-ppc, for example.
(From OE-Core rev: a19fc8e19a6cc6885a1e0616b1f42cc49c8f2c9f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, users can get extremely confused errors since the sanity tests
happen too late (after parsing) and don't see the warnings.
Also cleanup messages about merging configuration file changes to give better
hints at where the updated files may be.
(From OE-Core rev: 7b8a68cda7ef8186e834b39e73ee12a55b33f85b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_validate_branches ensures that the desired SRCREV is at
the tip of every branch that contains the revision. To do this,
it looks for containing branches and processes them.
This processing was mistakenly placed before the check for an
invalid SRCREV, hence a git error message is seen in the log
if a bad SRCREV is used, rather than a clear message.
reordering the checks, and fixing a check for master, ensures
that clear messages are generated in all cases.
(From OE-Core rev: 7e4518bf88af53b09536a3bafcd4c392a094023f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When patches fail to apply, the status of all pending patches should
be exported to the logs and to the user. Currently, a missing export
of GUILT_BASE makes it look more like an internal error, than a 'normal'
patch failure:
| [ERROR] unable to complete push
| pending patches are:
| Patches directory doesn't exist, try guilt-init
With this variable exported, we have this:
| [INFO] validating against known patches (qemux86-standard-meta)
| error: patch failed: Makefile:2
| error: Makefile: patch does not apply
| To force apply this patch, use 'guilt push -f'
| [ERROR] unable to complete push
| pending patches are:
| links/files/0002-makefile-patch.patch
(From OE-Core rev: b2b2512cbc4196fa0f814be3677517dab30e5b52)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides one package group, packagegroup-core-apps-console, which
is usually brought in by adding "apps-console-core" to IMAGE_FEATURES.
Aside from the naming inconsistencies, this is a group of mostly
unrelated packages, none of which are actually "apps". Handling each
one:
* dbus: should mostly be brought in by package runtime dependencies
* avahi-daemon: if you are using packagegroup-base (as all images that
inherit from core-image do) this is brought in by having "zeroconf" in
DISTRO_FEATURES.
* portmap: not very useful by itself; should be brought in by selecting
NFS server/client through other means.
* psplash (or whatever SPLASH is set to): this has been changed to be
an explicit item "splash" in IMAGE_FEATURES. Since this is a fairly
fundamental feature, a piece of code has been added to automatically
handle this for images still using apps-console-core (and show a
warning).
(From OE-Core rev: 592d6e602466628d10704835a7b07d3d713f58e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try to avoid confusion with the Qt demos distributed with Qt itself.
(From OE-Core rev: dbbcc0cb9d2cbc66027c800075b94eb9b7110a00)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable tasks other than do_package* (similar to how image.bbclass
disables everything except do_rootfs). This saves a little time as well
as neatly avoiding the LIC_FILES_CHKSUM verification within do_configure
which is not needed for package groups.
(From OE-Core rev: fde2b0db798f03cf297a0d466a9c3a444f1321f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the Sato pieces have been moved out, rebase packagegroup-core-x11 on
packagegroup-x11-mini but using the structure/contents of meta-oe's
task-x11 so that it can replace that; rename packagegroup-core-x11-mini
to packagegroup-core-x11-base and pull in the xserver/utils packages via
packagegroup-core-x11, and move both of these recipes under
recipes-graphics.
x11-mini is renamed to x11-base as it's what people should build on top
of and since x11-mini is newer, the corresponding IMAGE_FEATURES item is
less likely to be used in existing user recipes.
(From OE-Core rev: 0cc9ced7d96b960994b0671095bc74becfc55e2c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move Sato applications to packagegroup-core-x11-sato.
Note that this eliminates both the apps-x11-core and apps-x11-games
IMAGE_FEATURES; in practice it is unlikely these were useful to anyone
outside of the Sato images however.
(From OE-Core rev: 46cc375f29d5ecac7311613514a474f288d7c781)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows package group recipes that do not want the automatic
addition of complementary packages (e.g. for SDKs) to still inherit from
this class and thus it becomes very easy to determine if a recipe is a
package group which we need to do in certain circumstances.
(From OE-Core rev: 3a3ae22bc0be5b36e0400986930f30c22a61a74e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It has never been true that this enables exporting the entire rootfs.
(From OE-Core rev: ecd818f1a7a46aa0eeffe48445f2cf0db5aab67a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This indirection does not add anything in terms of configuration and
only serves to increase confusion; and given the nature of these it is
unlikely they are being used outside of OE-Core. Change the sato-sdk and
sato-dev images to be based on the main Sato image (avoiding the need
for a common SATO_IMAGE_FEATURES variable) and eliminate all references
to them.
Fixes [YOCTO #2458].
(From OE-Core rev: 6488842b0d03cfec9f8675eca5a2e05675decf66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable was added in the very same commit that added a mechanism
that makes it obsolete: if you have dropbear and you want openssh, you
just add ssh-server-openssh to your IMAGE_FEATURES and it will replace
dropbear via IMAGE_FEATURES_REPLACES_.
(From OE-Core rev: 6c78d99cc2e54a99af22357d7567f64e864949b9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runstrip(path, elftype, d) does bitwise & on the elftype parameter, so it has
to be passed an integer. Passing None fails with: TypeError: unsupported
operand type(s) for &: 'NoneType' and 'int'.
(From OE-Core rev: 67f21c6c698464959c27c7e65ee537ab4c378944)
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've not idea why this got left in but as per the comment, it needs fixing
and we shouldn't have hardcoded mappings like this. Lets remove it
and dynamically generate the data instead.
[YOCTO #3039]
(From OE-Core rev: 2df064ad46c1510fa8a401c22db4ab3278c3c807)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch converts the nativesdk class itself from operating as a suffix
to a prefix (see the proceeding patch for the related changes outside this
class).
The big benefit here is that we can reuse the generic class extension code.
(From OE-Core rev: f01f0b8aed25af889f48fe1afff96feb3d9ed120)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes builds where master.list doesn't already exist. This
change was meant to be part of the previous sstate commit but ended
up separated.
(From OE-Core rev: c2109b765b24a7ffe4781257ad3fe4641a3b2a49)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a potential problem where two sstate packages try and touch the same
file. This adds code which will print a warning whenever this happens.
The implementation does but by maintaining a master file list and comparing
file accesses against this. There are a number of places we have duplicate
accesses which are harmless, mostly in the deploy directory so these
are whitelisted.
For now the code prints warnings, this could be strengthened in future to
become error messages. Whilst working on this code on and off over the past
few months various issues were uncovered, some serious.
[YOCTO #238]
(From OE-Core rev: 1f1b6f93d6b7aa8c9bd9bb5b1826997812e36932)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The "tar-package" is used for saving the "Source" list for rpmbuild,
there is no such a file when "ARCHIVER_MODE[type] ?= srpm", and there
would be errors, it hadn't happen before was becuase that the remove
function didn't work. Let the "rpmbuild --rmsource" to remove the
Sources, and the remove function will just remove the tar-package file.
* Remove several unwanted "try ... exception" sentences, let the error
raise rather than ignore them when the error happens.
* Remove several un-needed code.
[YOCTO #2619]
(From OE-Core rev: 6ac3e8be0307ecaea5e92f8bda94f1cd2193a47a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A part of the code in copyleft_compliance.bbclass is duplicated to
archiver.bbclass, remove the duplicated lines.
[YOCTO #2619]
(From OE-Core rev: 731e1171d6c35ed086b36c081f48dba2015319f8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configuration value from the conf file is lower case, e.g. srpm,
tar, so there is no reason to use the upper case which makes things
complicated.
[YOCTO #2619]
(From OE-Core rev: 036a2502689092bb278b929f6e8ef2a119c1cf35)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix the fakeroot issue
The archiver.bbclass is used for archiving sources, patches, and logs,
it uses the "rpmbuild -bs" from the package_rpm.bbclass to generate the
.src.rpm, but it didn't work (it's not easy to explain it clearly):
Reason:
- It directly used the "fakeroot" command, we don't have such a
command in native tools, so it would use the fakeroot from the host,
and it would fail when there is no fakeroot on the host.
- The "rpmbuild -bs" doesn't need to work under root, but it is in the
function do_package_write_rpm which is running under fakeroot, and
"rpmbuild" needs to know the source file's user/group name, the source
file is the tarball which is created by the postfuncs of do_unpack
or do_patch which doesn't use the fakeroot, so the created file's
owner would be the real user, e.g.: robert, but there is no such a
user under our native tools' fakeroot(pseudo), then the rpmbuild would
fail. It worked when use the host's fakeroot in the past was because
that the host's fakeroot knows the users on the host.
Fix:
- Remove the incorrect "fakeroot".
- Change the source file's owner to root.root under fakeroot will fix the
problem.
* Other fixes:
- The typo: "do_remove_taball -> do_remove_tarball" which will cause the
tarball is not removed.
- Add the _sourcedir defination to the rpmbuild command since the the
SOURCES would be added to the specfile when archiver.bbclass is
inherited, otherwise there would be errors when "rpmbuild -bb", though
the build is OK. It only added the defination to "rpmbuild -bs",
didn't add to "rpmbuild -bb".
[YOCTO #2619]
(From OE-Core rev: ac152f277fdff256def01af4268215a05685a0f7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make the comment line under 80 characters.
* Use the triple double quotes for the docstring.
* Add a whitespace behind the comma (,).
* Other minor fixes.
[YOCTO #2619]
(From OE-Core rev: 885a95992abe11ebef7a8e4363e6002ee80403bf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several fixes:
* It uses mixed tab and whitespace as the indent in one function,
Fix them to use "4 spaces" as the indent.
* Remove the unwanted blank, for example, more than one blank lines
appeared together.
* Remove the tail whitespace.
[YOCTO #2619]
(From OE-Core rev: 5eacbcdf306d9e743164a1563559cd24eb5fffe0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These cause various file conflicts and aren't useful within the sysroot anyway. We might
as well remove them. Whitelisting the contents of ${datadir} that *is* useful might
be a better option in future.
(From OE-Core rev: c9fdd2fd108fa557d8f60339405447b4ea4d6f64)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit a9f11849 [linux-yocto: explicitly export KMETA to scripts]
allows the meta branch name to be changed by exporting it to all
phases of the build.
But if a custom kernel without a meta branch is built, we end up
passing an empty string to the creation scripts, which breaks the
build since input is expected.
Inhibiting the export of KMETA to the creation scripts when empty
fixes the problem.
(From OE-Core rev: 61162fbe01993659301fe2e821bf9c3e801206d8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support custom repositories that set a SRCREV and that only have
a single master branch, do_validate_branches needs a special case
for 'master'. We can't delete and recreate the branch, since you
cannot delete the current branch, instead we must reset the branch
to the proper SRCREV.
(From OE-Core rev: de5bb5879fa3282c46dc1ede36af34eaab8f647f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the kernel's tools/perf/Makefile CFLAGS was previously hard coded to
contain "-I/usr/include/slang" to work with hosts that have
"/usr/include/slang/slang.h" as well as hosts that have
"/usr/include/slang.h". This path can cause compile warnings like:
cc1: warning: '/usr/include/slang' doesn't exists.
or
cc1: warning: include location "/usr/include/slang" is unsafe for
cross-compilation [-Wpoison-system-directories]
Then in some cases warnings become errors if WERROR is enabled hence
build errors.
In coordination with a kernel fix, we can fix this error for all
kernels by modifying the perf Makefile within the staged kernel
source.
(From OE-Core rev: 4e0daf05ed04e9fb4343032c6290a379f53b89f3)
Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"ERROR: Nothing PROVIDES 'grub-efi-x86_64-native'" is returned when
trying to build meta-intel/meta-cedartrail with DEFAULTTUNE = "core2-64"
Used TRANSLATED_TARGET_ARCH instead of TARGET_ARCH in grub-efi.bbclass
[YOCTO #3013]
(From OE-Core rev: 20e2aaacb36113604c4ea7c40dd0bbbf224b8360)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The last two distutils changes progressivly broke the builds. Firstly they
moved things from the site_packages directory to being higher up the tree
which introduced package QA warnings as a side effect. Secondly, it interacts
badly with setuptools which passes in --root=${D} itself.
This patch restores the original directory layout, hence fixing the QA
warnings and also passes extra options to setuptools to deal with the
--root option it passes.
(From OE-Core rev: bed18d5df7915e4127a538be9c7550e185c8c850)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This let's the user override install-lib argument again if it needs
to be something else, otherwise things like python-setuptools
won't be able to modify the install-lib dir
This fixes a new issue exposed by my previous distutils patch
that fixed the python modules default install location. Also,
it removes running the install step twice which was inadvertant
(From OE-Core rev: 3b23feca31480cc56f55301fd0274e622c40b522)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function takes quite a number of arguments and can be tricky to use
properly; this is not made easier if it is undocumented, so document all
of the arguments. (No functional changes, comments only.)
(From OE-Core rev: 324fbcc047819b6948d13eda627ec898cb1f1eb8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The incremental rpm generation usually broke when package_rpm.bbclass
changed, change its implementation to make it more stable:
* It depended on the previous and current saved manifest files in
the past, it would break when the manifest changed. Now query the
previous and current installed pkgs from rootfs/var/lib and
rootfs/install/, this would be more reliable, the manifest's change
would not affect it any more.
* Add explanations before package_install_internal_rpm to explain what
does the function do.
* Remove an unwanted "awk '{print $1}'".
[YOCTO #2906]
(From OE-Core rev: 5d8ca498e09438bd91654fa8b8b2c970956d88e3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In toolchain edge cases it's possible for the RPATH of a library to be
set to something like "/usr/lib/../lib". This should be detected as
"/usr/lib" and generate a warning.
(From OE-Core rev: 72a924d0686389d648338efd3f675fc85ee2d181)
Signed-off-by: Andy Ross <andy.ross@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was pointed out we have a number of weird indentations in the python functions.
This patch cleans up 3, 7 and other weird indentations for the core bbclass files.
It also fixes some wierd (odd) shell function indentation which my searches picked up.
(From OE-Core rev: 8385d6d74624000d68814f4e3266d47bc8885942)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
texi2html is not actually required to build world of OE-Core anymore,
so we don't need to mandate it. The only difference without it (verified
with buildhistory) is that groff doesn't produce HTML documentation; the
rest of its docs are still produced and packaged and no other packages
are affected.
Part of the work towards [YOCTO #2423].
(From OE-Core rev: aa1c4519f8e549b43a7d8bc51c5342d3409b464b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* I have 2.6.37 kernel without this directory and do_install now fails
after 813256bf7bb6e26d542d5f769e2802564116ebe5
(From OE-Core rev: 9a83afe0794e96590aee374555efea91b3085b91)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kern-tools scripts can support a meta branch and directory of a name that
isn't "meta", but they need the name passed through the environment variable
KMETA. ensuring that KMETA is exported in the shell environment sets the stage
to support flexible meta branch name.
(From OE-Core rev: 9b90c8ace04c88ac6105f0bf686f9abc70fe8074)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel branch is no longer required by the yocto-kern-tools
to locate BSP feature descriptions (it is the MACHINE:KTYPE
descriptor), so we no longer require that the BSP branch be
explicitly set.
If a kernel branch is explicitly set, it is now used to trigger
a checks to ensure that the branch really is being built.
Otherwise the branch that the machine description creates will
be built (just as it always was).
This further simplies the use and configuration of a linux-yocto
based kernel recipe.
(From OE-Core rev: 3cac3ce65abae9dc253641a2004440a2b38fd44d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
asm/unistd.h includes asm/unistd_64.h on x86_64
and asm/unistd_32.h on i386 but these files are
generated files in 3.4 and when we do 'make clean' they get
deleted and it shows up as an error when building
external modules. May be its a 3.4 kernel bug may be not
but make clean should have left the tree in
a shape to build modules but it does not.
Probably we should run make modules_prepare after having
run make clean.
(From OE-Core rev: 813256bf7bb6e26d542d5f769e2802564116ebe5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PACKAGECONFIG flag code only handles that when it has 3 or 4 items in flag,
it may have a stale data if some flags doesn't need DEPENDS and RDEPENDS.
(From OE-Core rev: 884cab0428cff2ffd070b6f36b688ca9851fbe43)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race where do_clean tries to clean WORKDIR but there are logfiles
written into ${T} by bitbake and this can lead to exceptions due to open files.
The easiest solution is to redirect T to a different location for the do_clean
task, hence avoiding the errors and also allowing the logfiles to be visible
somewhere. ${LOG_DIR} seems an appropriate place for this.
[YOCTO #2846]
(From OE-Core rev: eef9d6c2d52f5264a6e7a9d882f8323f9793fd7f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* There would be race issue if we put the lock to the WORKDIR, for
example:
bitbake core-image-sato core-image-sato-sdk
If the lock is in their own WORKDIR, the apt-rootfs.conf and
Packages.gz maybe be written by two tasks at the same time, which
would cause unexpected errors.
* Create ${target_rootfs}/etc since the "tar -C" needs it.
Note:
* The rpm has put the lock to DEPLOY_DIR_RPM
* The ipk doesn't need it since it has locks for each deploy directory
and put the opkg.conf in his own WORKDIR, which doesn't like deb put
the apt-rootfs.conf in ${STAGING_ETCDIR_NATIVE}/apt/.
[YOCTO #2495]
(From OE-Core rev: 23ac392f8b868296eb9e7cd840f9b28ed6917b27)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this some modules will be intalled in /usr/lib/python2.6/
instead of /usr/${libdir}/python2.6
(From OE-Core rev: bc6bd774aa8a3e085e9cabcefb11c3fc537139d5)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During an attemptonly install, if you try to install two packages that
conflict with each other, a message is generated:
error: Failed dependencies:
dropbear conflicts with openssh-6.0p1-r4.ppc603e
dropbear conflicts with openssh-sshd-6.0p1-r4.ppc603e
This is placed onto stderr (vs stdout), which was not being redirected.
This allowed the log-check code to find the magic key of "Failed" causing
the package installation process to fail. Instead the proper behavior is to
simply ignore the error and proceed with the install.
(From OE-Core rev: 16d8d7fdda4ae7d108f5d50cde3f6104e231bd23)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a case when RPATH embedded in program have one of
its path already relative to ORIGIN. We were losing that path
if such a path existed. This patch appends it to the new edited
rpath being created when we see it.
so RPATH like below
(RPATH) Library rpath:
[$ORIGIN/../lib/amd64/jli:$ORIGIN/../jre/lib/amd64/jli]
would end up being empty
but after this patch its kept intact
(From OE-Core rev: 43600df0d4efc976a9451163dd334b4763937932)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this change, a path to "/lib/xxx" or "/usr/lib/xxx" would also
attempt to be remapped to be relative to $ORIGIN which makes no sense.
(From OE-Core rev: 73e2c12534856f14c1a94fb51874e9ba1655f07b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When chrpath fails, prefix the error message with the name of the recipe
that is being processed, and include the the output from chrpath, as
well as making the calling task actually fail.
(From OE-Core rev: 99815eddd4e1eb5d939831704231537dd5a995ad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building the meta-toolchain, the binaries didn't get relocatable
RPATHs. They were hardcoded to the default path. Hence, if one had
already installed one SDK in the default path and one in another
location, the later toolchain's binaries would search and load libraries
from the first location, ending in a "Segmentation Fault".
[YOCTO #2927]
(From OE-Core rev: b40a03c43d5d9d738a9aa5b43b2ecfe74fc95018)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The problem appears if multiple setup environment scripts are found. In
order to find only the script we're interested in, I removed globbing in
matching pattern with ${REAL_MULTIMACH_TARGET_SYS} that will be expanded
to the correct string.
Also, fix a problem when changing the scripts/configs. The grep pattern
matched also files that contained "text" in their name.
(From OE-Core rev: d81768560676da201fd730ae3930b080ab8c5c75)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that the result of getVarFlags is not a list, it's
a dict. So "getVarFlags(...) or []" does not reliably produce
something with a .items. This escaped detection because our
local build environment never ends up running builds without
PNBLACKLIST entries.
(From OE-Core rev: 491df239170dd20f3e91df6bc1ead2945a78e075)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If chrpath failed here we were just silently ignoring it.
(From OE-Core rev: 24babf9316da50c8a4d2f328c4336cb8cd6cf667)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the Pimlico applications (Contacts, Dates, Tasks). oe-core isn't a
reference PIM stack, so we don't need this.
(From OE-Core rev: 373895e6c691277e15a09aee3504243448c55b50)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class registers postinst/postrm hooks to compile the GSetting schemas, and
adds the relevant dependencies. If possible the postinst happens on the host to
avoid running it on the target.
[ YOCTO #2798 ]
(From OE-Core rev: ba9d5626174c1144b83963755ef310328306c3a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename rpmresolve's -d option to -t and make -d enable debug output;
add a -o option to specify the output file (so rpm debug output doesn't
go to the output file) and also add a little more detail to some of the
error messages.
(From OE-Core rev: 163dd734d79fd7040b48b10bca6fde28460ac20c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel.bbclass is a common class for many different kernel versions,
and as such the default module_autoload and module_conf values that
it contains are not relevant, or out of date for most builds.
Individual kernel recipes or distros can better specify these
values to meet their needs.
(From OE-Core rev: a134efa7743edc3b7ca8abb651add6d2045c3b44)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PNBLACKLIST feature does not currently work with multilibs,
because they have different ${PN}. The obvious thing to do is to
do this at the same point that we do the PREFERRED_PROVIDER
and PREFERRED_VERSION fixups. (Making the PNBLACKLIST check
do the for-each-multilib check requires it to do the multilib
list generation repeatedly.)
(From OE-Core rev: 9bc0ca9369d0daee94abf60d3d521cc734c7e8cd)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is useful when you have a rather large set of compatible distros. For
example: Centos 5.4, 5.5, 5.6, etc, RHEL server 5.x, RHEL workstation 5.x.
(From OE-Core rev: 0e9932b2dba8573736c92bd07e59bad21b9fda2d)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libdir should be specified, or else mklibs won't work for 64bit targets.
It wouldn't be able to find the libs.
Traceback (most recent call last):
File "<build>/bitbake_build/tmp/sysroots/i686-linux/usr/bin/x86_64-wrs-linux/mklibs", line 553, in <module>
header = elf_header(find_lib(libraries.copy().pop()))
File "<build>/bitbake_build/tmp/sysroots/i686-linux/usr/bin/x86_64-wrs-linux/mklibs", line 89, in elf_header
raise Exception("Cannot find lib: " + obj)
Exception: Cannot find lib:
(From OE-Core rev: d2cd2ccea8bc4d110647ba3bd202772e5407000a)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_libdir change in 5b8a4798ea
breaks the kernel build for 64 bit machines. Revert this part of the
change.
(From OE-Core rev: 351bdc59f8af915ae203af7799eedc0ce42785f2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If ${PN} is not in PACKAGES then don't add it as an RDEPENDS for each
locale package. This fixes the installation of gcc-runtime locale
packages, for example.
(From OE-Core rev: d36c3235b3022c07f064929f55114f808a7634f6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Always write the metadata revisions for each layer into a machine-
readable "metadata-revs" file so that you can potentially link changes
in the output back to changes in the metadata. (Unlike the existing
similar build-id file, this is not specific to image changes.)
(From OE-Core rev: 45f38d167b523d769c072474b36b3d9b31b4e9d9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Save PKG (the actual output package name, which is often different due
to debian renaming), and PKGE/PKGV/PKGR (which may be manipulated in
certain special cases e.g. gitpkgv.bbclass in meta-oe, the
external-sourcery-toolchain recipe, etc.) Note that these are only
written when they are different from the normal package name in the
case of PKG, or PE/PV/PR for the other variables.
Also, use PKGE/PKGV/PKGR instead of PE/PV/PR when comparing package
versions since these actually represent the version that the package
manager sees.
Implements [YOCTO #2787].
(From OE-Core rev: 65d7e9b2d4d8115ac9fd513c04f39a2df9556a5a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Write the value of these package script variables into the packageinfo
so that any changes to them can be tracked (in separate files since they
are multi-line).
Inspired by an earlier patch from Andreas Müller <schnitzeltony@googlemail.com>
(From OE-Core rev: 988a417c857c01c87de6ba9602968059cf8d830f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getlastrecipeversion and readRecipeInfo weren't called anywhere.
Remove them so we don't have to keep them up-to-date with future
additions to the recipe info file.
(From OE-Core rev: 22bf6284576ccee607d7bd197420a29242df11c0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a package is removed from PACKAGES, ensure that the package info file
and directory are removed from buildhistory so that we don't have stale
data lying around.
(From OE-Core rev: 223b183197b363edef0c11a25bad33555fca5a15)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the ability to set BUILDHISTORY_KEEP_VERSIONS = "1" to save the
package history as flat versioned files rather than relying on git to
keep previous versions of the package information. git has proven to
work quite well in this capacity.
(From OE-Core rev: ccedfd250620fc562988ba730ad5717b107a9d3e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: c859717f522098e7c68df578d59011f68122dc2c)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have moved the rpm-createsolvedb.py
script to createrepo-native for good reason of
python-native dependency, we have to make sure
that it is staged before its used, unlike before
where it was under scripts/ dir and always existed
outside the realm of package management.
Fixes build error when doing meta-toolchain builds from
scratch
|
/home/kraj/yocto/poky/build/tmp/work/ppc64e5500-poky-linux/meta-toolchain-1.0-r7/temp/run.populate_sdk_image.26712:
line 610: rpm-createsolvedb.py: command not found
| DEBUG: Python function do_populate_sdk finished
| ERROR: Function failed: populate_sdk_image (see
/home/kraj/yocto/poky/build/tmp/work/ppc64e5500-poky-linux/meta-toolchain-1.0-r7/temp/log.do_populate_sdk.26712
for further information)
(From OE-Core rev: 90cfe33d30ef4f9491bd52e7965c5279a2e2650c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RP: The list of recipes in multilib.conf needs to go away and we need
to just be able to extend all recipes with the multilib class.
Tested by building and running lib32-core-image-sato-sdk.
[YOCTO #1563]
(From OE-Core rev: 5d691f1bc95dfb9109b07827b33957b1fa5b2fa4)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change binaries RPATHs, to include $ORIGIN, to make them relocatable.
(From OE-Core rev: f6362c5248914485fc8bf3c3f0ca6cc962bf753e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the code in relocatable.bbclass will be used for relocating the
SDK binaries. So, create another class chrpath.bbclass that will contain
the core of the relocatable.bbclass, so we can reuse it.
(From OE-Core rev: b50677b1641b201fd69942fd82a360907338234d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order for the SDK to be relocatable, the user would need to call a
setup script to change the binaries acordingly. Having an auto-extracting
archive has the advantage of being more user friendly and the user does
not have to call the setup script separately after extracting the SDK.
It is called automatically.
(From OE-Core rev: d4e976849da845d595db7029d8089946ae16d982)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sourceforge.net link is broken at the time of this patch,
so I added a mirror.
License changed to GPLv2+
(From OE-Core rev: 1452b5e60eff29e7423ecdd51d2d942e88dcc263)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: af274b1b266b5aa661823bd702eacc62cc3aefff)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move scripts/rpm-createsolvedb.py to
meta/recipes-support/createrepo/createrepo/ since we should wrap it to
use the native python.
[YOCTO #2822]
(From OE-Core rev: 72d673bef385e756bd858f9eca7fe419efaceb39)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
we were assigning local variable to an array coming through
positional arguments. local is a non posix contruct thats
also supported by dash luckily but operates differently in this
case it exapnds the array before assignment. so
local pkgs="$@"
turns into pkgs=locale-base-en-us locale-base-en-gb
ant we see errors
run.do_rootfs.25593: 932: local: locale-base-en-gb: bad variable name
So lets not use defining and assigning local in one go
first define a local and then the assignment
(From OE-Core rev: 4029ce1a15e1dbd374444ee77ccf2a915e463b7b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* some packages have .ko files which are not elf, without this change
it fails with TypeError, with this change only runstip fails and
reports where:
ERROR: runstrip: ''arm-oe-linux-gnueabi-strip' '/OE/shr-core/tmp-eglibc/work/armv4t-oe-linux-gnueabi/emacs-23.4-r0/package/usr/share/emacs/23.4/etc/tutorials/TUTORIAL.ko'' strip command failed
(From OE-Core rev: a834ab8a6d53cae504fa112a89bab93d726539ec)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To enable building the commercial edition of Qt (through additional
recipes that are *not* provided by OE-Core) we need to tweak a few
things:
* Don't make recipes that inherit qt4x11.bbclass depend on qt4-x11-free
- instead add qt4-x11 to DEPENDS and then have qt4-x11-free include
this in its PROVIDES. A commercial equivalent recipe should do the
same.
* Add a QT_LICENSE_FILE variable that can be used to specify the license
file required by the commercial edition.
* Add a QT_LICENSE_FLAGS variable which the recipe can set to select the
license option being used. The default of "-opensource" retains the
current behaviour; a commercial recipe should set it to "-commercial".
Fixes [YOCTO #2505].
(From OE-Core rev: 2be0058fc4acddab611637656183accd052b40eb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of OE-Core revision 72d1048a8381fa4a8c4c0d082047536727b4be47,
rpmresolve is now required for complementary package installation during
do_populate_sdk.
(From OE-Core rev: 8a71c1a507289d38a0f675584ab206abfa9aad9a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We set do_populate_sdk[depends] in populate_sdk_*.bbclass, but since
these are inherited at the top of populate_sdk_base.bbclass, those
values are wiped out by using = at the end of the latter class. Use +=
to avoid this.
(From OE-Core rev: a87b5d6cab34579cf3abe03f4663d9a72e218397)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Linux 2.6.x kernels did not (all) have the bounds.h file, so copy
only iff exists.
(From OE-Core rev: 02ac0d1b65389e1779d5f95047f761d7a82ef7a4)
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If do_package needs to be re-run and packages are removed/renamed as a
result, we want the corresponding stale pkgdata files to no longer be
present; for that we need to ensure all of the old pkgdata files are
cleaned out prior to creating the new ones. This is particularly
important now we rely on pkgdata more heavily (for complementary
packages, license manifest, etc.).
(From OE-Core rev: 5dee47b476a6f715ab02af5e758441a2a934eea3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce the number of calls to the packaging tool, especially in the case
of rpm, using helper utilities to gather the required information more
efficiently where possible.
(From OE-Core rev: d0b8a98c5b46c305afd389fc862b3bf0c6f1eaab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a staticdev-pkgs feature that can be added to IMAGE_FEATURES in
order to install all staticdev packages.
Fixes [YOCTO #2531].
(From OE-Core rev: 3ba9c0757eb51a0bb5873f4faae023587a33cc1d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a similar mechanism that was previously used to install locales at
rootfs generation time to install other "complementary" packages (e.g.
*-dev packages) - i.e. install all of the explicitly requested packages
and their dependencies, then get a list of the packages that were
installed, and use that list to install the complementary packages. This
has been implemented by using a list of globs which should make it
easier to extend in future.
The previous locale package installation code assumed that the locale
packages did not have any dependencies that were not already installed;
now that we are installing non-locale packages this is no longer
correct. In practice only the rpm backend actually made use of this
assumption, so it needed to be changed to call into the existing package
backend code to do the complementary package installation rather than
calling rpm directly.
This fixes the doc-pkgs IMAGE_FEATURES feature to work correctly, and
also ensures that all dev/dbg packages get installed for
dev-pkgs/dbg-pkgs respectively even if the dependency chains between
those packages was not ensuring that already.
The code has also been adapted to work correctly with the new
SDK-from-image functionality. To that end, an SDKIMAGE_FEATURES variable
has been added to allow specifying what extra image features should go
into the SDK (extra, because by virtue of installing all of the packages
in the image into the target part of the SDK, we already include all of
IMAGE_FEATURES) with a default value of "dev-pkgs dbg-pkgs".
Fixes [YOCTO #2614].
(From OE-Core rev: 72d1048a8381fa4a8c4c0d082047536727b4be47)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the performance of the RPM backend during do_rootfs by
performing most of the package name to file resolution in a separate
utility written in C, processing the entire list of packages at once
rather than running rpm on the command line which loads the RPM database
for every package.
(From OE-Core rev: 9135d351ba7cb21e50239d2b310565680bd4fdca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the lsb name and revision to the path used for sstate files.
This means that reuse of sstate files between different distributions is restricted
by default. The behaviour can be configured using mirror urls, for example:
SSTATE_MIRRORS = "file://Ubuntu-11.10/(.*) file://Ubuntu/\1 \n"
would map Ubuntu 11.10 to a more generic "Ubuntu" named sstate feed.
Usually, more modern distros have increased libc versions for example
so whilst more older native/cross sstate packages will usually work on newer
distros, the opposite is not true. This patch allows development of policy
to better handle this although no default policy is currently being used.
(From OE-Core rev: 9360fc318cec5c873b17f59b817dd6312c81ee27)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently all sstate files are placed into one directory. This does not scale and
causes a variety of filesystem issues. This patch adds a two character subdirectory
to the layout (based on the first two characters of the hash) so that files
can be split into several directories.
This should help performance of sstate in most cases.
(From OE-Core rev: 5d45c7b025f6635b2232d7bf92b7c1aba350396b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can then be used by the sstate code to mark native and cross packages
as being specific to a given distro.
(From OE-Core rev: 8556eb98be8bd9f02ee11a0d8a889c1895c86460)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"error_promt" -> "error_prompt" changed in both places
"subfolers" -> "subfolders" since it's not referenced anyway
(From OE-Core rev: cc1f824778c023686b4ea75c64a182a138ff2267)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make dbg package dependencies added via DEPCHAIN_POST less aggressive -
only add dependencies on dbg packages for shared library dependencies.
This avoids dragging in extraneous packages (such as eglibc-dbg forcing
bash-dbg to be installed) whilst preserving the ability to easily debug
into shared libraries in use by an application by just requesting the
installation of the single dbg package for that application.
For task recipes however we preserve the previous behaviour, since when
you install task-xxx-dbg you expect the dbg packages for every package
in the task to be installed. Unfortunately not all of our tasks inherit
from task.bbclass so we just use a name match - this should be tidied up
later.
Fixes [YOCTO #2599].
(From OE-Core rev: 352522d474cb75992d7865545b6fbe4e157a5f99)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid adding dependencies to dev and dbg packages on themselves via the
DEPCHAIN_* handling code. These don't actually cause any problems, but
they do complicate dependency graphs.
(From OE-Core rev: ecdf7874470cff24cb23b7fd2723096b15aead31)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If something is listed in ASSUME_PROVIDED but also manually built (like bzip2-native and
bzip2-replacement-native), we need to ensure that the installed binaries are only accessed
for things which list the provider in DEPENDS.
This patch adds a generic mechanism to handle this instead of everything reinventing the
wheel. EXTRANATIVEPATH += "perl-native" will ensure that ${STAGING_BINDIR_NATIVE}/perl-native
is added to PATH.
This means that:
a) Such providers should install to ${bindir}/xxx-native
b) Should PROVIDE += "xxxx-replacement-native"
c) That users should DEPEND on xxx-replacement-native and have EXTRANATIVEPATH += "xxx-native"
This patch enables this at the core level, the bzip2 recipe still needs adjusting to work
like this along with adjustment of the users of bzip2-replacement-native (python-native?).
(From OE-Core rev: 14b70cd222519e5bccaca955334787f123d9fc54)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want to query the PACKAGE_ARCH from the installed package (as we
do in order to be able to do a pkgdata lookup for example) then we need
to have this stored in its own field as this is not always the same as
the Architecture field for deb packages.
(From OE-Core rev: 3f4f6726646e18ae21919e2f361b669332796aef)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While generating license.manifest package information is searched in:
filename=`ls ${TMPDIR}/pkgdata/*/runtime/${pkg}| head -1`
This is ok as long as package name is the same as the package name
after packaging.
For example dbus is packaged as dbus-1. So, searching
ls ${TMPDIR}/pkgdata/*/runtime/dbus-1 will fail because there is no file
with this package name.
Create a symlink to the pkgdata file in a runtime-reverse directory so
that these reverse lookups are possible.
Fixes [YOCTO #2638].
(From OE-Core rev: 76ef414b8a017557cf5f3ad7b3ca8a324f7aad29)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intent of the uImage code in this class includes the following
1) be able to specify custom load addresses without needing to patch the kernel
2) add better information to the uImage description field
The current state is a NOP anyway, the kernel will always build a uImage when you tell it to 'make uImage'.
weakly Set KEEPUIMAGE to 'yes' in default-distrovars.inc which preserve the
current OE-Core behavior. Machines which are being ported from oe.dev and need to
regenerate uImage can set this to be empty
(From OE-Core rev: 72a7049526ee107005bd39c7bdd814ed71345829)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without that fix we have the following while compiling compat-wireless.
include/linux/mmzone.h:18:30: fatal error: generated/bounds.h: No such file or directory
Note that the compat-wireless recipe will be added in another commit.
make -C $kerneldir _mrproper_scripts deleted this file along with
other things so we resurrect it with this patch.
(From OE-Core rev: 2d114fd0cdf7486f18e53f2bf41c4f559e4b4a8d)
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a fix to Ross' series, we need to run gtkdocize in case anything
was built from source control and the appropriate files are missing.
(From OE-Core rev: aaf762bf20635a92d16e7aad6c154891d9d689c4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
allarch sstate packages could be marked as machine or package_arch specific. This
change ensures they are not.
(From OE-Core rev: f3104240ad5bb542c339ee29b2672523ad3ae50c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Normally do_package is machine specific but this makes little sense for allarch
recipes. This patch unsets the appropriate variable.
(From OE-Core rev: 79e52a9825240a72b49a5c3f3ad8e0dbc74ad9f1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In do_kernel_checkout(), replace the creation of ${S}/.git with just
the creation of ${S} since the .git subdirectory is created only a few
lines later using a "mv". Here's the original code:
rm -rf ${S}
mkdir -p ${S}/.git
echo "WARNING. ${WORKDIR}/git is not a bare clone."
echo "Ensure that the SRC_URI includes the 'bareclone=1' option."
# we can fix up the kernel repository, but at the least the meta
# branch must be present. The machine branch may be created later.
mv ${WORKDIR}/git/.git ${S} <-- See? There it is.
There's no functional change here, it's just less confusing.
(From OE-Core rev: f0d318177096a7a1c7406642663ae4ce28010d12)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 072476bb6468d984ae3246f478fd5b3a21f7c8d6)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update python-native to install the binaries in the python-native directory,
add pythonnative.bbclass to let recipes that need python-native use the
binaries and update disutils access the new binaries. Update distutils-base
to inherit pythonnative.
(From OE-Core rev: a2e554f731437545e9483a7a73e6847c03f6f48a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many people don't understand the nuances of PATH/BBPATH, so help them by clarifying
the warning and displaying the parsed list element-by-element.
(From OE-Core rev: 6f7be2498134402b5e0f766df5c57e1f496d0d06)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a package-index.bb which will update the index, but the
DEPLOY_DIR_RPM may not exist, for example, when "bitbake package-index"
in a fresh build.
Only the package_rpm.bbclass needs this, the package_ipk.bbclass and
package_deb.bbclass doesn't need.
[YOCTO #2753]
(From OE-Core rev: 72e18bb4171698a386b277b12d973e3d0fd7c4cc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1919]
Create a basic EFI installer script modeled after the existing installer
and add it to a new initramfs-live-install-efi recipe. Update the
init-live.sh script to distinguish between LABEL=install and
LABEL=install-efi and select the appropriate script. Add the efi
installer to core-image-minimal-initramfs.
Update grub-efi.bbclass to use "LABEL=install-efi" when it detects a
label of "install". This is clearly not ideal, but a proper fix would
involve decoupling the LABELS assignment from the image-live.bbclass
usage of SYSLINUX_LABELS. We should be able to address that in a
follow-on clean-up series.
V2: Include missing initramfs-live-install-efi_1.0.bb
V3: Rebase after Radu's console_params fix
(From OE-Core rev: 4bce3417917a3e88ba6529db394525fba82e0699)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found that some files were not getting removed from the sysroot, despite them
clearly being removed by the recipe. I found SYSROOT_DESTDIR is only ever copied
into, not cleaned. This patch ensures its empty when the task starts so that
stale files are removed and not persisted.
(From OE-Core rev: 8a313f6d32ae0bdac0393887712b09f1b685aaa5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no point in having doc, manpage or info files in the staging directory. They
just bloat the sstate package size and waste time as they're copied around.
We never used to stage these but it crept in when we started staging $datadir. This
patch corrects that so they're removed and stop making it into the sysroot.
(From OE-Core rev: ec4fea852bde2294ad7a7a703ccf11eb9a109c31)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TARGET_PREFIX already has the dash included.
(From OE-Core rev: ca30b6587841f5e9a42aaedb8e0b89ff5a4a6a37)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This catches up with the STAGING_KERNEL_DIR location change
and uses the correct variable to future proof this issue.
[YOCTO #2783]
(From OE-Core rev: 28715eff6dff3415b1d7b0be8cbb465c417e307f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many people don't understand the nuances of PATH, so help them by clarifying
the warning and displaying the parsed PATH element-by-element.
(From OE-Core rev: 47e6ab41f0f84e6bed7d337ebf96c954ec6909e8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enrico Scholz
Ross Burton
Paul Eggleton
Jackie Huang
Saul Wold
Bernhard Reutner-Fischer
Laurentiu Palcu
Richard Purdie
Khem Raj
Martin Jansa
Peter Seebach
Bruce Ashfield
Constantin Musca
Mark Asselstine
Lukas Bulwahn
Andreas Müller
Hongxu Jia
Philip Balister
Chen Qi
Wolfgang Denk
Christopher Larson
Mark Hatle
Jason Wessel
Enrico Scholz
Radu Moisan
Robert P. J. Day
Emilia Ciobanu
Martin Ertsaas
Marco Cavallini
Fahad Usman
Björn Stenberg
Phil Blundell
Lukas Bulwahn
Tom Zanussi
Andrei Gherzan
Darren Hart
Andy Ross
Elizabeth Flanagan
Andrei Dinu
Holger Freyther
Ming Liu
Marcin Juszkiewicz
Koen Kooi
Stefan Herbrechtsmeier
Robert Yang
Fabien Proriol
Morten Minde Neergaard
Samuel Stirtzel
Andrei Gherzan
Holger Hans Peter Freyther
Otavio Salvador
Bogdan Marinescu
Thomas Kristensen
Wenzong Fan
Vladimir Zapolskiy
Kang Kai
Tomas Frydrych
Liang Li
Mihai Lindner
Matthew McClintock
Yao Zhao
Florin Sarbu
Jesse Zhang
Javier Martinez Canillas
Leon Woestenberg
Denis Carikli
Morgan Little
Martin Ertsaas