The IDU requires that udhcpc does neither touch resolv.conf nor install a
default route. Add a flag to switch off default route installation, the
resolv.conf part is already switch-off-able.
It looks like a classic src != build dir issue of the
utility breaking the build on Yocto-Master. Try to fix
that.
ERROR: Function failed: do_install (log file is located at /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/temp/log.do_install.2455)
ERROR: Logfile of failure stored in: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/temp/log.do_install.2455
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'arm-32', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function do_install
| install: cannot stat `/home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/git/rtl8168-eeprom': No such file or directory
| WARNING: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/armv5e-poky-linux-gnueabi/rtl8169-eeprom/v0.0.1+gitAUTOINC+e62e515ce3-r0/temp/run.do_install.2455:1 exit 1 from
| install -m 0755 /home/builder/jenkins/workspace/Yocto-
From the obn-test config, I wrongly assumed that the inmarsat config should
be static on a vessel. Instead, we need to figure out a way to use dhcp with
linkmon.
The builds of the stable upgrade and the Yocto-Master failed
because of the commit gone missing (no remote is referencing
it). I created a dummy branch to hold this commit.
* We never need the BTS firmware. We never want to do GSM from
within rescue image
* Remove various udev hardware dbs. I think we couldn't care less
about identifying peripheral devices by name and such.
The system should be as small as possible and besides tools to
touch flash and block files, SSHD and rauc there should be nothing
else. We might continue to have opkg on it to allow updating it
The reverse dependency appears broken. Add a comment to
the recipes to warn us when updating. The issue does not
appear to exist in master of Yocto.
Related: SYS#1353
The partition layout needed for rauc is different from the one created
by the existing installer (based on the live image).
An initramfs-framework module for installation to the sysmocom-idu is
added. It is included in a corresponding initramfs image for use on an
USB memory stick.
When using squashfs + overlayfs a root, we need to store the backup
somewhere else and restore it on every boot. Do avoid breaking existing
users, this is implemented in a separate recipe (as suggested by Holger).
We don't use any binary only components and can avoid the performance
penalty.
[hfreyther: The ODU build had changed the tune through
the local.conf already]
Barebox should be built like the kernel. We have to disable the target
userspace tools because they cannot be build using KERNEL_CC (which is
missing --sysroot=).
Move the default file list to a separate file in /etc/sysmocom/backup.d,
which is itself included in the backup. Also create a symlink to the
most recent backup.
- remove file with wrong path to ifplugd
recipes-core/busybox/files/busybox-ifplugd.sh
DAEMON=/usr/bin/ifplugd vs. /usr/sbin/ifplugd
- use lambda expression for sysmobts/sysmobsc-kernel to
include busybox-ifplugd or not
- use different defconfig files between master
and dora to enable ifplugd or not
- use different interfaces files between master
and dora to enable auto stanza or not
for the dhcp interface
Fixes: SYS#868 and SYS#1535
[hfreyther: Try to pick an option less likely to break the
Dora support but allowing us to move forward. Not entirely
compile tested due IO load of the system]
The /boot directory is excluded from the squashfs image only, as in that
case it is stored separately. This allows booting normal sysmocom images
as rauc slots.