Community member Robert P.J. Day pointed out that the URL used to
reference the Edison tarball in the manual was incorrect. It was
pointing to the old Poky area and not the Yocto-1.1 area. I have
updated the example 'wget' command with the correct URL.
(From yocto-docs rev: 402500c03a625dd7e2561775926e3a983daa0ab6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a missing section for installation of the Eclipse Yocto Plug-in.
This information is critical to the release. Jessica discovered the problem.
New section added that describes how to install the plug-in as a standard
"New Software" installation from within the Eclipse IDE.
(From yocto-docs rev: d4976ec56d39813a72519387897023f65a5884f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re-structuring of the web server that holds the documents created
some bad links. I thought I had gotten them all but apparently not.
this is a drawback of not being able to test things until after stuff
is done. In any case, I grepped through everything and this takes
care of it.
(From yocto-docs rev: cdbc3b3b7f6d6ff01024b977f966459cf414ad5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The restructuring of the web site where we store manuals broke some
links that were cut-and-pasted in from older work. These slipped by
me so not changing them would direct the user to a 1.0 version of
the externally referenced manual rather than the 1.1 version.
I also got rid of a visible "WRITER'S NOTE" in the document that
was left behind.
(From yocto-docs rev: 1508826312a2fe35e5d693821a4c7737baafcb2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to add some changes to the way we invoke qemu to show multiple
processor support. I needed the qemuparam "-smp 2". There are
other minor edits as well.
(From yocto-docs rev: 508863634ce537b0936f8e44f87b90bef678c122)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I somehow had either dreamed the word "einstein" into the release
for 1.1 and had it in there as part of the tarball name, etc.
I have replaced this obviously with "edison."
Other edits involved making the references to outside documents
more consistent.
(From yocto-docs rev: 2407b7dd89712c489d515e97d44e3c7dc0b64d20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the pathnames for kernel 3.0 from 2.37
(From yocto-docs rev: 220ce5fbb3663940b5940445190d30d98f58a438)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits for the kernel example.
(From yocto-docs rev: 01e9f01662efad746fbfc34820b6efeb34affecd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to import a series of changes to synchronize
live booting between multiple targets:
d05450e meta/fri2: enable booting from iso
3da7d2a meta/fishriver: enable booting from iso
52e1c49 meta/emenlow: enable booting from iso
87918ae meta/crownbay: enable booting from iso
(From OE-Core rev: 7100c50c8697a3eec446b9189bf49ecbea9b7264)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-ran the exmaples to set up various Git repos and updated the output.
Also fixed a bad tarball name from edison-1.1 to edison-6.0
(From yocto-docs rev: 6538d588fa35986ff301a22d327af73c337ec43c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the book to clean up all areas in preparation to
running the examples again. Most changes were punctuation, manual
section reference formats, and wordings.
(From yocto-docs rev: 0d054f79c82ddc204938dea187312d1a80d0a2e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More changes to the internal section references. Using <link> rather than
<xref> to get rid of the section number in the reference.
(From yocto-docs rev: 4351fd4898c517e25235611893b1cd059cbcc2f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am using a certain form to reference other sections in the current
or other manual. I updated the references to follow this form.
(From yocto-docs rev: 2ba41ac2f355dbe66af19e356f9246b7485585b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing instruction to tackle
RPC: Authentication error; why = Client credential too weak
Are not applicable to ubuntu 11.10 especially
Therefore add the magic needed for ubuntu 11.10
(From OE-Core rev: faae191e8c1920745e0ea9abf7b8b26eb4561096)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made several changes based on feedback from Jessica Zhang.
1. Removed "SDKVERSION" as a way of identifying the directory in
which a toolchain tarball is installed. I replaced with "1.1"
2. Cleaned up the bitbake command verbage to consistently use
'bitbake' command.
3. Cleaned up an erroneous reference to the toolchain environment
setup scripts. I was referring the user to the oe-init-build-env
area.
4. Changed wording to indicate that the toolchain tarball is generated
after running bitbake rather than installing the toolchain.
5. Replaced the gmae tarball file used in an example to be the
regular taball.
(From yocto-docs rev: f7c3e4f4a666121a29825099d451eab1accb0616)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the bernard examples used when creating Git repos to reflect
the edison release.
(From yocto-docs rev: d345cb08905e7f5e21b1649af5e876317cc68931)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed several small things in the example as I worked through it
once again. The commit IDs changed for using the atom-pc kernel.
Also the command to build the sato image can no longer use 'live'.
(From yocto-docs rev: faff1e7f21b5059dfe708c6a3d83116c7349fe55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need to use the long command to restart Eclipse. It will have
been restarted as part of the procedure. I updated the last paragraph
to simply point the user off to the next section.
(From yocto-docs rev: bca280e74f81a0401c520c8a59e9e07e16f28b8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are for installing the YP Eclipse plug-in using a built out
ZIP file.
(From yocto-docs rev: ea50f63d448b4ff6026a9334440058511782461d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback from Richard Purdie inserted. I made an edit pass for
style to Richard's re-write.
(From yocto-docs rev: e5bb08e966614c610e6357642b3b2d1522332f7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some slight edits to configuring the Eclipse IDE and the
procedure to install the plug-in from the zip file. This is not
complete yet.
(From yocto-docs rev: 96de3d21946d64e6b877f067912da8677c3d373a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section used the term "tree construction" somewhat out of context.
The section really focuses on what the build process and the user does
prior to compilation. I changed wording to indicate the tree is
validated to be sure that the SRC_URI point to the right stuff and
that the BSP build branch exists.
(From yocto-docs rev: e6332d5045b21354b53bbbe1203f9d52d4d97964)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made a few corrections to the section describing how to build
the tcf-agent into non-sdk images.
(From yocto-docs rev: e78dc3b3d3dd443506e78651cf9673358577c21d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP only ships one pre-built image that has the tcf-agent built
into it - core-image-sato-sdk. There are a couple methods that exist
to create images that do not normally have this agent so that they
will have it. I updated the "Getting the Images" section to
contain those steps. Lianhao and Jessica Zhang were the technical
resources for these changes. These changes are the first draft.
(From yocto-docs rev: 85432e4892c3fe924bf90961f89e8edfd9693e84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a section on how to prepare for and use the multilib
feature. The information is leveraged off the "Multilib" wiki page
at http://wiki.yoctoproject.org/wiki/Multilib. This is the first
draft of the changes. I expect corrections.
(From yocto-docs rev: 8cf41c90f772018f4f144d63df911912cc298d70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a link that was an autobuilder link to be
http://www.yoctoproject.org/downloads/yocto-1.1/machines.
(From yocto-docs rev: 91a4056a285b53f8c73494e8af88d9a98d6d61e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the title pages for the ADT, BSP, Dev, and Ref manuals to
contain the Oct 6 release date for the books. Also, changed the
author field for the BSP guide to include Tom Zanussi as well
as Richard Purdie.
(From yocto-docs rev: 301da0a5b305e4b332397bb67f6a6a77751991d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through and made sure examples are relevant, wording is correct,
large blocks of unused text was removed, and some references included
to other YP documents.
(From yocto-docs rev: 2231082530dd9cecc234f5f024c4e246afb2968d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this variable description in the glossary.
(From yocto-docs rev: 12a9e5b4dfc399ff2037355aa1062f907a62e76d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Paul Eggleton he suggested that the wording we had about YP focusing
on the GNOME Mobile environment was misleading now. It was in there in the
original version of the FAQ but with time has become outdated. I simply
removed the "GNOME" part and left the part that mentions about YP
being a stable
environment and well-suited for the embedded mobile environment.
(From yocto-docs rev: cc7103eda3fd77d89cecfffa23f0f798aa512132)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example I use for the BSP structure I use the Crown Bay
BSP. I neglected to include any explanation of the recipes-core
directory. I have added some description around this area.
(From yocto-docs rev: ba56c86e5a4aa3fbf23b12d26ffe35a3b6193a78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the section on the supported distribution section by including
a link to the wiki page that shows what distros we have tested and
their status.
(From yocto-docs rev: e66a18a13dc02af6a0846dd1ecf14aeafcbe5d61)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new subsection to the section that talks about how to install
the YP eclipse plug-in. According the Jessica, we should document
this method for installing the plug-in.
(From yocto-docs rev: dea5b1dacc16c08d61356e95bece2aec581dd16d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the second pass for re-documenting RDEPENDS, RRECOMMENDS,
MACHINE_ESSENTIALS_EXTRA_RDEPENDS, MACHINE_ESSENTIALS_EXTRA_RRECOMMENDS,
MACHINE_EXTRA_RDEPENDS, and MACHINE_EXTRA_RRECOMMENDS. These
variables are in dire need of better explanations and examples.
(From yocto-docs rev: cc60bd4c50c7b19209dae06307aec26e962cf476)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did complete rewrites of RDEPENDS, RRECOMMENDS,
MACHINE_ESSENTIAL_EXTRA_RDEPENDS, MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS,
MACHINE_EXTRA_RDEPENDS, and MACHINE_EXTRA_RRECOMMENDS. These are
sent out for review but these changes represent the first attempt
to clear up confusion on how the six variables are used and relate
to each other.
(From yocto-docs rev: 1d93707fb9383d51322e96eb521e96fcac8bcc47)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided better descriptions of these variables and some examples on
how to use them.
(From yocto-docs rev: 3a5cce8c9ba02f90b3554a6f800f69c2e8e77911)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a more robust description and provided a couple of usage
examples.
(From yocto-docs rev: b8b842b57cc003f1351a551041fe4b3de2fcbfd6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added sterner wording on usage and provided an example.
(From yocto-docs rev: 32e07fafadb602b93c9f7b8a78e5baf4c7e1ab5e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the description of POKYLIBC to note the variable is not supported
and provided a link to TCLIBC. I added the entry for TCLIBC, which
was missing.
(From yocto-docs rev: d76a1ddb79577a3e121df3d590fb601b5e5fbb98)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Noted that POKYMODE is no longer supported and provided link to TCMODE.
Added richer description to TCMODE.
(From yocto-docs rev: a7a326c2c8f4c5f29f3a9723a6895a7113a78357)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor re-wordings to give some context on how to use these special
files and the variable to point to them.
(From yocto-docs rev: 4482b42f4a224bada7a0fa5fe4821a753ba55d80)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Richard Purdie
Bruce Ashfield
Khem Raj