The validity of the udev cache is determined by the sysconf
file (/etc/udev/cache.data). Currently, there is a substantial delay
between sysconf generation in /etc/init.d/udev and cache generation in
/etc/init.d/udev-cache. If a hotplug event arrives in the middle of
this, then the sysconf will be out of date with respect to the cache.
The solution is two-pronged. First, we minimize the race window by
regenerating the sysconf immediately before the cache, in
/etc/init.d/udev-cache. This allows us to kill the race entirely by
stopping the udev event queue while the sysconf and cache are being
generated.
(From OE-Core rev: 107e7fa2b2cc2e06addb83518c03b3ab769fed6f)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the split out of git-perltools, some git tools (such as "git am",
"git send-email" and "git-submodule") have no longer been part of the
buildtools. We need these, so add them back in.
However, adding git-perltools to buildtools triggers perl itself being
brought into buildtools as well, and we don't want that; but we also
don't want to have to hack the git recipe or indeed anything else that
starts depending on perl. Thus, add a dummy package which gets installed
in its place, in a separate package architecture that is only enabled
for buildtools to ensure it doesn't start appearing in place of
nativesdk-perl anywhere else.
Fixes [YOCTO #7033].
(From OE-Core rev: 5b051d65e797624cca3a81fc6f5c924925f3493e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Template unit files (those with '@' in their names) are not handled with
native version of systemctl. This is usually not a problem, as the
native systemctl fails and systemctl command is executed during first
boot. But some early boot template units may fail during first boot
because opkg configure for first boot is pulled too late for them
(although I encouter it only with some of my services, not with oe-core
ones).
Handling of template unit files is same as in original systemctl. Also
DefaultInstance directive in template is respected. As with original
systemctl, enabling of template without instance and DefaultInstance
does nothing.
(From OE-Core rev: 90904ef3bab182a46174f7bb60e83f0f22a3f209)
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: c0650feb6ce7151a22632bab7270002314a1b6be)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per commit f6587be6cd3dc864143b1c0be0bb8179a61dc835 (lttng-modules:
re-enable ARM builds) lttng-modules is fine for ARM now. Without this
additional change, tools-profile won't bring in lttng-modules when
targeting ARM.
(From OE-Core rev: fbf979da6e6b7332dccab38fd66f3c01594f8211)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This binary is provided by shadow-native nowadays. Fixes:
ERROR: The recipe coreutils-native is trying to install files \
into a shared area when those files already exist. \
Those files and their manifest location are: \
.../tmp/sysroots/x86_64-linux/usr/bin/groups \
Matched in manifest-x86_64-shadow-native.populate_sysroot
To reproduce the errors:
$ bitbake shadow-native && bitbake coreutils-native
(From OE-Core rev: 113225b93c55d55a330fcca7d9f996ec039fb953)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
switch_root is provided by both busybox in /sbin/switch_root and util-linux provides one
in /usr/sbin/switch_root, so move util-linux's to sbin and setup ALTERNATIVE_LINK.
(From OE-Core rev: cac818f0ecd0553b59b967a94766534643fecdf4)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the gcc has resolved this, so we revert the workaround patch.
This reverts commit f026b7a211.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
option-groups.h only explicitely #defines options that are enabled.
EGLIBC options are typically pre-processed under the assumption that if
an option is not explicitely defined then it evaluates as 0.
This assumption is correct, but it generates a compiler warning
message each time an undefined symbol is being evaluated.
In order to remove the warnings, each EGLIBC option is now defined
as 1 if the option is enabled or as 0 otherwise.
The consequence is we cannot use #ifdef OPTION_XXX when evaluating
the option, we must always use #if OPTION_XXX.
[YOCTO #7001]
(From OE-Core rev: 7f1bdc331304a61a4836a5752bca210450b6c5b5)
Signed-off-by: Juro Bystricky <jurobystricky@hotmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of always disabling manpages for systemd, we use PACKAGECONFIG
for 'manpages' so that the manpages for systemd could be built out correctly.
(From OE-Core rev: 9abb72664b27cf5fbde50283b2a877ce546c3d43)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As this recipe's ptest support is merely a shim to pull in dbus-test-ptest it
doesn't inherit ptest. This means that PTEST_ENABLED isn't ever set, so check
DISTRO_FEATURES directly.
(From OE-Core rev: 7ee1da8126f1d4957e533cc26696e85c5a6de4bb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use CONFFILES to mark editable files as such,
/etc/init.d/checkroot.sh
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
(From OE-Core rev: a265af666a80298ccca0eb80d6f15ca3d4be8b57)
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use CONFFILES to mark editable files as such,
/etc/motd
/etc/nsswitch.conf
/etc/profile
If there is no %config micro before the file name in the spec file,
this file will be overwritten after updating package.
This will make our settings lost.
(From OE-Core rev: 2ffc174e9506a00081457145f0fcf3bef5846f4a)
Signed-off-by: Jian Liu <jian.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove obsolete_automake_macros.patch, since upstream has merged it.
(From OE-Core rev: 5873734b21735f9fb598c7d8e67ce8cef9ddb39c)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The getopt binary itself is only a few kb, while the util-linux package
is much larger. The lsb package is very small and depends only on
getopt. Break it out into util-linux-getopt in order to reduce the disk
requirements of lsb on systems that don't otherwise bring in util-linux.
(From OE-Core rev: 3626e8df78ffecd29735c1e79eb3ccccec54a663)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Acked-by: Ken Sharp <ken.sharp@ni.com>
Acked-by: Ben Shelton <ben.shelton@ni.com
Acked-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This aligns the params of getty with the ones used in Debian. From the
getty(8) manpage:
,----[ getty(8) manpage ]
| -L, --local-line
|
| Force the line to be a local line with no need for carrier
| detect. This can be useful when you have a locally attached
| terminal where the serial line does not set the carrier detect
| signal.
`----
Reported-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
(From OE-Core rev: d7f057341e5c007783f41247ee054f257a9f2f64)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This aligns the params of getty with the ones used in Debian. From the
getty(8) manpage:
,----[ getty(8) manpage ]
| -L, --local-line
|
| Force the line to be a local line with no need for carrier
| detect. This can be useful when you have a locally attached
| terminal where the serial line does not set the carrier detect
| signal.
`----
Reported-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
(From OE-Core rev: a899c362be71cb7b94bd318c57702446b017005c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Craig McQueen <craig.mcqueen@beamcommunications.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #6951]
The TOOLCHAIN_CONFIGSITE_SYSROOTCACHE value was defaulting to the nativesdk
path and not the associated target path. Set the value in toolchain-scripts
to the target path.
Be sure to set the MLPREFIX within the meta-environment script as multilibs
are processed.
Update the config_site file name to use -BPN- not PN. Otherwise the
environment processing can't find the correct filename.
(From OE-Core rev: 1f05aaa4944ddac6c2b3ba440effdf1eaf732656)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for 'audit', otherwise there would be warnings like
below which would possibly lead to do_rootfs failure.
WARNING: QA Issue: systemd-analyze rdepends on audit, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: systemd rdepends on audit, but it isn't a build dependency? [build-deps]
(From OE-Core rev: b4e6e0aa0229d2ce4c8bee24581c127a31109676)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously there was a change to the ncurses compile to make it more
like the typical way it was compiled on a host system. This fixed a
whole class of host machines, but masked the real underlying problem
with the display corruption issues and menuconfig.
The corner case that led to the discovery that the wrong curses.h file
was getting used was when there was no curses libraries at all on one
of the development hosts. What had happened before was that
/usr/include/curses.h on the host system had to match closely enough
to the curses.h in the sysroot and then linking against the sysroot
version of curses.so was ok (meaning no display corruption). But on
some systems with ncurses.h vs curses.h such as SuSE hosts, there were
still issues.
If we fix the root of the problem and force the mconf and lxdialog to
use the correct headers and libraries from the sysroot there is no
further issues and the menuconfig target works properly. It also
means we can back out the custom compilation flags to the ncurses
recipe because they are no longer needed.
For the kernel part of the menuconfig / nconfig changes it will be
merged separately and this is all based on:
https://lkml.org/lkml/2013/3/3/103
(From OE-Core rev: 889e02659dd396feba24f0b0ee6b4043c3f3735a)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include two enhancement patches from Olaf Mandel <o.mandel@menlosystems.com>
(From OE-Core rev: e2a32d9a0e18dc0565d5a2d9197616ac9b338d77)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git-perltools provides some usefull git tools like:
git-submodule, git-request-pull, git-send-email, git-am, etc.
We should have it added in self-hosted image.
(From OE-Core rev: 4b0cbdc9c94b336f3102d4cce1886842b28ce6d5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of cherry-picking pieces of Python to put into the buildtools tarball,
ship all of it. We can't predict what bits of Python will be needed in the
future.
(From OE-Core rev: 745dfbc869fd593d1b92e2bc9c01d589ab21ade3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure that /proc/sys/kernel/hotplug exists before trying to disable
the uevent-helper mechanism.
Since kernel commit 86d56134f1b6 ("kobject: Make support for
uevent_helper optional.") the kernel can be built without uevent-helper
support. In this case /proc/sys/kernel/hotplug does not exist and the
current sysvinit script fails with
/etc/rcS.d/S04udev: line 132: can't create /proc/sys/kernel/hotplug: nonexistent directory
when trying to disable the uevent-helper mechanism during boot.
Note that a single NULL-character has always been sufficient to disable.
(From OE-Core rev: f7b8445f2e89ad0a59c2859f9eb26855769f1070)
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using udhcpc along with ip command(/sbin/ip), broadcast address is not
assigned. Broadcast address is successfully assigned when using udhcpc without
ip command existence.
with ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:0.0.0.0 Mask:255.255.254.0
$
without ip command:
$ifconfig eth0|grep Bcast
inet addr:128.224.162.141 Bcast:128.224.163.255 Mask:255.255.254.0
$
/etc/udhcp.d/50default[simple.script] is called to set ip address by dhcp
client, In case of ifconfig, it doesn't care of it's existence because it
will automatically calculate broadcast address then assign it if there is
no broadcast option. However in case of ip command, it requires broadcast
address statically.
(From OE-Core rev: 666c6a126cd12d2555361f5b573b6a26437df780)
Signed-off-by: Hu <yadi.hu@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some header fields of ELF were read with wrong size on 64bit
big-endian machine, fix it by reading the fields with read64
instead of read32.
(From OE-Core rev: adbf0b1fdf897076e5e3dec2443c8927f315c2e6)
Signed-off-by: Par Olsson <Par.Olsson@windriver.com>
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libgudev-1.0.la still references /usr/lib and this change was breaking gypsy (detected in navit) and
network-manager-applet
(From OE-Core rev: 7807d1d8b9535a87ba3e5ab7df21a2954708333f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was discovered that the patch for CVE-2014-0191 for libxml2 is
incomplete. It is still possible to have libxml2 incorrectly perform
entity substituton even when the application using libxml2 explicitly
disables the feature. This can allow a remote denial-of-service attack on
systems with libxml2 prior to 2.9.2.
References:
http://www.openwall.com/lists/oss-security/2014/10/17/7https://www.ncsc.nl/actueel/nieuwsberichten/kwetsbaarheid-ontdekt-in-libxml2.html
(From OE-Core rev: 643597a5c432b2e02033d0cefa3ba4da980d078f)
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SRCREV_FORMAT to provide a composite version number
for get_srcrev() in fetch2 code.
(From OE-Core rev: 87cda76a2f004813420d7730c4f2f74839d3c2df)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: QA Issue: systemd rdepends on libidn, but it isn't a build dependency? [build-deps]
(From OE-Core rev: 83be6e94f35b44baa6c363c9518f85e7670246f3)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd avoids using nss lookups for the root user, so
naturally it assumes that root's home directory is /root.
In OE that's not the case, and it can lead to long delays when
shutting down due to user shutdown unit failures.
(From OE-Core rev: e1efc61979b329c651c15acff1afeba2987397b5)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The _rl_tropen function in util.c in GNU readline before 6.3 patch 3
allows local users to create or overwrite arbitrary files via a symlink
attack on a /var/tmp/rltrace.[PID] file.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-2524
(From OE-Core rev: 0e95eef8817f51504dcc50d855dcbef172cfc897)
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed ncurses.do_configure:
configure: WARNING: did not find library /path/to/tmp/sysroots/qemuarm/usr/lib/pkgconfig
And then anyone requires ncurses.pc will fail.
The configure.in checks:
[snip]
if test -n "$PKG_CONFIG_LIBDIR" && test -d "$PKG_CONFIG_LIBDIR" ; then
[snip]
Create PKG_CONFIG_LIBDIR in do_configure will fix the problem.
We can reproduce the problem by:
Set SSTATE_DIR=/path/to/sstate-cache
1) In build1, make sure everything is ready in SSTATE_DIR
$ bitbake ncurses
2) In build2, rebuild ncurses only:
$ bitbake ncurses -ccleansstate && bitbake ncurses
Then we will see the warning in log.do_configure.
(From OE-Core rev: ea4010c8398745736b0c22ed037604db8fc43212)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The s_sin.c patch undoes some code changes in glibc itself, these changes have nothing to
do with the option groups and I suspect crept in as part of the initial conversion. Undoing
this patch also fixes a test failure in test-double and test-idouble.
[YOCTO #6808]
(From OE-Core rev: 5f225067dcb7244065f857d34e1041171844b243)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some machines change TARGET_OS, cross-canadian resets this which
is not what we want in this specific case. This fixes spe toolchains
for example.
(From OE-Core rev: 0038634ee6e2b6035c023a2702547f20f67c103a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently libdir is coming from cross-canadian which is incorrect. We
need to reset this to target_libdir so that the toolchains contain the
correct value.
(From OE-Core rev: 41f8f32c8da705ead464ee69bc5a1e120b137693)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Firstly, when multilib builds were being used, the same output files
were used in each case, being overwritten each time due to the fact that
REAL_MULTIMACH_TARGET_SYS has been expanded. Instead of immediate
expansion, just use assignment. This overrides the problematic define
in toolchain-scripts.bbclass but allows the multilib code to work.
Secondly, the target sysroot was being defined incorrectly which
this patch fixes. This was breaking the toolchains.
(From OE-Core rev: 17229152453a8633b2cd63b429f98cc7c192f300)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As this recipe inherits allarch, it makes no real difference whether
we are using ${PN} or 'volatile-binds'. But using ${PN} would keep
the same style with the other recipes in OE.
(From OE-Core rev: 708cc039b6cc891e466e89d2b10fcdea6c19287c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a user takes coverage in gcc of SDK, it becomes the link error in SDK
because there is not libgcov.
----
ld: cannot find -lgcov
collect2: error: ld returned 1 exit status
----
(From OE-Core rev: 99b26dba6e4f5a64579f183883265498000e3104)
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix allows the correct appending of -L to syslogd arguments when both file and remote logging are selected.
(From OE-Core rev: ca68019760de6c5d5401be8eae7e65e7e6ca9021)
Signed-off-by: Michael Gloff <mgloff@emacinc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when build with meta-selinux even with --without-selinux:
runcon.c:49:28: fatal error: selinux/flask.h: No such file or directory
# include <selinux/flask.h>
^
compilation terminated.
(From OE-Core rev: d52a606c8a75496f3b7239adc19fdb66e3ae576a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tmpfiles configuration in systemd unconditionally creates a symlink
from /etc/resolv.conf to the location where systemd's resolved service
will place the real file. This link is only appropriate when resolved
is enabled and running: its presence prevents connman or other systems
from providing a working resolv.conf when systemd is not assigned that
responsibility. OE has not yet enabled systemd's networkd or resolved
by default.
There is a TODO in the systemd source to fix this, but it has not been
addressed upstream. This patch comments out the corresponding line when
resolved is not enabled in the package configuration.
(From OE-Core rev: 7e2b05a6f59209687829225878a19a1dad8143b9)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are the start of a new idea, a way of allowing a single set of
cross/native sstate to work over mutliple distros, even old ones.
The assumption is that our own C library is basically up to date. We build
and share a small tarball (~2MB) of a prebuilt copy of this along with a
patchelf binary (which sadly is C++ based so libstdc++ is in there). This
tarball can be generated from our usual SDK generation process through
the supplied recipe, uninative-tarball.
At the start of the build, if its not been extracted into the sysroot, this
tarball is extracted there and configured for the specified path.
When we install binaries from a "uninative" sstate feed, we change the
dynamic loader to point at this dynamic loader and C librbary. This works
exactly the same way as our relocatable SDK does. The only real difference
is a switch to use patchelf, so even if the interpreter section is too small,
it can still adjust the binary.
Right now this implements a working proof of concept. If you build the tarball
and place it at the head of the tree (in COREBASE), you can run a build from
sstate and successfully build packages and construct images.
There is some improvement needed, its hardcoded for x86_64 right now, its trivial
to add 32 bit support too. The tarball isn't fetched right now, there is just a
harcoded path assumption and there is no error handling. I haven't figured
out the best delivery mechanism for that yet. BuildStarted is probably not
the right event to hook on either.
I've merged this to illustrate how with a small change, we might make the
native/cross sstate much more reusable and hence improve the accessibility
of lower overhead builds. With this change, its possible the Yocto Project may
be able to support a configured sstate mirror out the box. This also has
positive implications for our developer workflow/SDK improvements.
(From OE-Core rev: e66c96ae9c7ba21ebd04a4807390f0031238a85a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we have the horrible situation where meta-environment packages
the toolchain environment files and they get included in the SDK but are
broken, then, the SDK code overwrites them with good versions. This is
suboptimal.
This change fixes the code in meta-environment to create working
files and adds in the multilib support from populate_sdk_base, then
we remove the code in that base bbclass and rely on the packages
being installed if/as/when needed. This removes the duplication
and the broken versions of the files, hopefully making all well.
[YOCTO #6608]
[YOCTO #6613]
(From OE-Core rev: 063355e5965439c7b3253d692d7ab0ed1189d123)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the use of the cross-canadian inherit, TARGET_OS can be reset to
values other than the correct one, leading to generation of the wrong
files.
By expanding REAL_MULTIMACH_TARGET_SYS before the inherit, the correct
OS value is preserved and we generate the right environment files.
[YOCTO #6608]
[YOCTO #6613]
(From OE-Core rev: ae265973c96ff4b8b5580436647fc361490e134c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove wrong absolute hardwired path
for the VM disk image.
Fixes [YOCTO #6728].
(From OE-Core rev: f8a9b81192f8846937d85c7189018e35c860f7bd)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use ${libdir} instead of ${exec_prefix}/lib for libraries.
Otherwise, we would meet do_install errors if multilib is enabled.
(From OE-Core rev: 6beeccb81416b0a7af6a4b19cb641f0d66a7198a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If pam distro feature enabled, dropbear will need below pam rpms
to work:
* libpam-runtime
* pam-plugin-deny
* pam-plugin-permit
* pam-plugin-unix
Just add the runtime dependencies explicitly.
(From OE-Core rev: dfbeb663e99f3280d055ec04454353f2082ced03)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build Appliance VMware configuration has
been modernized:
- Default disk is a SATA one;
- CDROM and Floppy drives removed, no real use;
- 3D acceleration not really present, removed;
This solves a warning that VMware
Player/Workstation was displaying at boot.
- IDE disk removed.
- guestOS has been set to a 64bits Linux.
Fixes [YOCTO #6680].
(From OE-Core rev: be5b17b7f08f2c798f2dddcd15d5481cef2dc768)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following packages are gui based tools:
xdg-utils # A set of common interfaces for desktop
leafpad # A GTK+ text editor used in Build Appliance
midori # A web browser used in Build Appliance
pcmanfm # PCManFm file manager used in Build Appliance
vte # Virtual terminal emulator GTK+ widget library
Move them to packagegroup-self-hosted-graphics so that we can make
a graphics free self-hosted image by excluding the
packagegroup-self-hosted-graphics.
(From OE-Core rev: bb7d081ccb5a352d3089b6b30ab740e62c05e791)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that glibc 2.20 has been released. We switch
to use release branch and remove the already applied
patch
(From OE-Core rev: 70bfccd8e13af712381b4feea3ef882369951264)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These two services are fairly immature and need careful integration into the
rest of the system, so disable them for now.
(From OE-Core rev: 23efb1755c3074e17c547f9b9fd13564cc6d8566)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently a USB stick gets mounted on /run/media/sdX, where X is the
letter corresponding to a certain drive. In older builds of core-image-sato
it got mounted in /media/sdX. This change made the drives to not be
displayed in graphical applications which use glib-2.0 such as the
File Manager (pcmanfm). The reason is that the gio component of glib-2.0
which handles mounts contains a function which determines if a mount
is worthy to be displayed in the UI or not. The function is called
g_unix_mount_guess_should_display().
It expects a drive to be mounted in /run/media/<username>/sdX, but
in the current build the username part is missing in case a root user
is authenticated in the system.
The easiest solution is to allow the display of drives mounted in the
path used by the current configuration and that is /run/media/sdX.
[YOCTO #6492]
(From OE-Core rev: da9bbcd2233057a0529005b9b2cc34aff65bc6e2)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemd depends on the os-release hence adding
RRECOMMENDS for the systemd package.
[ RB - updated for 216 ]
(From OE-Core rev: 003d16fbd54f59422aab917b8f3bf2aec4ab50b6)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /etc/os-release will have the operating system identification data.
Tested on target with systemd enabled. Here is the sample file looks
in the file:
ID=poky-ivi-systemd
NAME=Yocto GENIVI Baseline (Poky/meta-ivi)
VERSION=6.0+snapshot-20140721 (daisy)
VERSION_ID=6.0+snapshot-20140721
PRETTY_NAME=Yocto GENIVI Baseline (Poky/meta-ivi) 6.0+snapshot-20140721 (daisy)
(From OE-Core rev: 8a12350e00b5443a24f3d6c7693fdde9fcb7319f)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Sujith H <Sujith_Haridasan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In systemd_216, journald by default doesn't forward messages to
syslog daemon. This breaks the oeqa testing cases. So we enable
forwarding the messages for now.
(From OE-Core rev: 67ddca4a5533328ff95ab61610b6a1db24f57e35)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to prevent the psplash init script from running via systemd
because the script is supposed to be used by sysvinit system and it
doesn't have any real effect in a systemd based system.
(From OE-Core rev: 2e847db3ac3333a68b721b11624f4f515bda7ccf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now support executing scripts under /etc/rcS.d. So we need to
mask several more init scripts here to prevent them from running
at boot time.
(From OE-Core rev: c8f9527f18e5dd813c0330ba409875d34c36f6ab)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we are building a systemd image with 'sysvinit' not in DISTRO_FEATURES,
the initscripts should not be installed into the image, as they are useless.
What's more, we as now support executing scripts under /etc/rcS.d, the
boot time will be increased by these scripts as the systemd will try to
translate them into temporary service files.
These init scritps are actually needed only when 'sysvinit' is in
DISTRO_FEATURES.
(From OE-Core rev: 74b931909e58fc581bb52c1af1f3ae26602980f3)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds support for systemd to execute scripts under /etc/rcS.d.
To be compitable, all services translated from /etc/rcS.d/ scripts would
run before services translated from /etc/rcN.d scripts.
[YOCTO #5159]
(From OE-Core rev: 90bb8e8f9bc2454590d230b209fc749ea7270b9e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-vconsole-setup.service not only configures font but also
keymaps.
(From OE-Core rev: ffcd4bf2198171c9663f72d4499d5d55c29abf40)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, after booting into the targets like multi-user.target or
graphical.target, the output of `runlevel' command is 'unknown'.
This is confusing for users. Normally, we would expect mutli-user.target
would have a `runlevel' output of 'N 3'.
This is the behaviour of Fedora20.
This patch installs symlinks for systemd-update-utmp-runlevel.service
in do_install task to fix the above problem.
(From OE-Core rev: cb7e692ec895ff9c15966faf29c9a84c0e78cdf5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for 'journal-upload' and disable it by default.
Once enabled, it will add 'curl' to its dependency.
(From OE-Core rev: b52c028252270c7bddc71554089fb184e52c5870)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade systemd from 213 to 216.
systemd-older-kernel.patch is removed as it's fixed in 216.
0001-uClibc-doesn-t-implement-pwritev-preadv.patch is removed because
the file it patches has been removed from the project.
0001-util-Including-missing.h-to-get-MAX_HANDLE_SZ.patch is removed because
it has been merged.
0001-missing.h-add-fake-__NR_memfd_create-for-MIPS.patch is backported
to fix compilation error for mips.
Below are the required kernel versions for systemd 216.
Linux kernel >= 3.0
Linux kernel >= 3.3 for loop device partition support features with nspawn
Linux kernel >= 3.8 for Smack support
(From OE-Core rev: 58c432b2725ad8b78d02cb91a6ab405d425c01cc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
change use of eglibc related variabled to glibc equivalents
(From OE-Core rev: fd15d6e0c8da75951a91d4467eda23c229b1026d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- This is a big swoop change where we switch to using glibc
- option-groups are forward ported
- cross-localedef is extracted out from eglibc and hosted
at github.com/kraj/localedef, its used for cross-localedef
recipe
- Other non ported patches from eglibc are forward ported
ppc8xx cache line workaround
SH fpcr values
dynamic resolver
installing PIC archives is there but is not applied
libc header bootstrap
- Delete eglibc recipes we moved back to using glibc now
- Fix ppc/e500 build
- Fix crypt module build when options are used
- Fix fnmatch build when options OPTION_EGLIBC_LOCALE_CODE is unset
HAVE_MBSTATE_T and HAVE_MBSRTOWCS should be defined conditionally
based upon OPTION_EGLIBC_LOCALE_CODE being set/unset
- Move the ports/ patches to relevant files now that ports is gone
(From OE-Core rev: 1027c535ea753e63d9ffe469a423e04467cf8940)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for 'elfutils'.
This also fixes a build-deps QA warning about libdw.
(From OE-Core rev: 559bacdb178d3f4846de86f90c9428ee662b471a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
export GIT_SSL_CAINFO so git can find the certs
(From OE-Core rev: 260ea7b85ecacf2fcd4d09fa2f602d3e4368ef69)
Signed-off-by: Fahad Usman <fahad.usman@gmail.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nativesdk-ca-certificates is needed in order to support oe/yocto builds with
buildtools-tarball on old hosts, as we provide libcurl, and that needs to be
able to find the certs, and there's no standard path or bundle path, so we
can't rely on the host.
(From OE-Core rev: 057954bcc4baf9194968169591537cd7584f8bcb)
Signed-off-by: Fahad Usman <fahad.usman@gmail.com>
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no bashism in the scripts, so use /bin/sh, and add /bin/sh
interpreter for systemd's run-ptest.
(From OE-Core rev: 62d455f89fb1d2c22cf987bdbb56a55e6d031ce0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add bash, python or perl to the ptest pkgs to fix the RDEPENDS issues.
(From OE-Core rev: d081a85fc76e2b7a469c6c70175ecf7aed9de053)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
include missing.h to get MAX_HANDLE_SZ which
is not defined in uclibc.
(From OE-Core rev: fa2a90ca632d10fe1a14098c3f4fcacc7cea6ac5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemd needs some extra defines e.g.
ADJ_NANO and IPTOS_CLASS_CS6
(From OE-Core rev: 7562021eef5b7585122c92db8b686808ebe7d85e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The zlib support is a must if you are using RPM backend. So this
explicitly enable it and adds a comment in the recipe to avoid its
removal by mistake.
(From OE-Core rev: 7d056397ab9912316064db850aae05aacabc726c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means these classes now avoid the allarch inherit entirely.
(From OE-Core rev: a56aed2e6e1b73bffd2bf82145fe48b82fde9292)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build busybox on mips with -g -O, there is a ice failure:
...
shell/ash.c:8758:1: internal compiler error: in dwarf2out_var_location, at dwarf2out.c:21264
...
Please submit a full bug report,
with preprocessed source if appropriate.
See <http://gcc.gnu.org/bugs.html> for instructions.
{standard input}: Assembler messages:
{standard input}: Warning: missing .end at end of assembly
{standard input}: Error: open CFI at the end of file; missing .cfi_endproc directive
...
The following line caused the ice failure on mips:
...
void evaltreenr(union node *, int) __attribute__ ((alias("evaltree"),__noreturn__));
...
So remove evaltreenr which was a alias of evaltree, and use evaltree
to instead.
[YOCTO #6625]
(From OE-Core rev: e9e2884a29e95703c5b1a2fffe5e6febfa77b5cd)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The udev-cache facility uses files that represent system states, to
ensure that the cache tarball is valid to apply. These paths were
hardcoded in several places; collect them into SYSCONF_CACHED and
SYSCONF_TMP.
(From OE-Core rev: f4fcb237da0d1013005e9a0bb2381cfeb4c5316c)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous changes should obviate all known spurious errors coming out of
tar. Since real extraction failures can and will occur, stop redirecting
stdout/stderr to /dev/null.
Take this opportunity to also remove an unnecessary subshell.
(From OE-Core rev: 09089962be353280201ba3899fd5ef9cc3c0ba32)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Archiving sockets causes tar to report an error and return a nonzero
exit status. Archiving a mounted filesystem is harmless, but may greatly
bloat the size of the cache tarball, and wastes time on boot.
To fix these issues, use `find` to only include the files we want, which
are the file types that udev will create (block/char devices and
symlinks) that are on the same filesystem as /dev.
While we're at it, remove a subshell by archiving /dev as an absolute
path. However, `tar` will complain about stripping the leading slash on
stderr. To inhibit this, `cut` out the leading slash.
An alternative solution is to use `tar --exclude`, but that is modestly
more brittle, since we'd need to explicitly list every socket and
filesystem to exclude. Note that `tar --one-file-system` is
GNU-specific, and tar implementations generally have nothing equivalent
to `find -type`.
If using busybox `find`, this change requires CONFIG_FEATURE_FIND_TYPE=y
and CONFIG_FEATURE_FIND_XDEV=y. If using busybox `tar`, this change
requires CONFIG_FEATURE_TAR_FROM=y.
(From OE-Core rev: e89df123e2ec516ae61763eab3c9e78e067e28d5)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under normal udev operation, device nodes are obviously timestamped
based on the system time at current boot. However, when using
udev-cache, they are timestamped from a previous boot.
The existence of machines lacking RTCs makes this more than a cosmetic
issue: if the current time is set further on in the boot, so that the
system time is still 1970 by the time the cache is extracted, tar will
print a timestamp warning for every extracted file (potentially hundreds
of them).
To fix, use -m on extract.
If using busybox `tar`, this commit requires
CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y.
(From OE-Core rev: b31f8f1f053cdfa9428e3f667c05e7e2c600061e)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y is needed for the commit
"udev-cache: strip timestamps on extract". Enabling this flag increases
the size of busybox by 0 bytes on x86.
(From OE-Core rev: 11a772b3297ef36f3ebc4b67c9477022352d1c55)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Tollerton
Paul Eggleton
Tomas Novotny
Jonathan Liu
Nathan Lynch
Armin Kuster
Wenzong Fan
Jackie Huang
Hongxu Jia
Juro Bystricky
Chen Qi
Ross Burton
Jian Liu
Chong Lu
Cristian Iorga
Otavio Salvador
Mark Hatle
Jason Wessel
Saul Wold
Johan Hovold
yadi.hu@windriver.com
Shan Hai
Martin Jansa
Khem Raj
Joe MacDonald
Joe Slater
Dan McGregor
Richard Purdie
Kai Kang
Robert Yang
Nobuhiro Iwamatsu
Michael Gloff
Peter A. Bigot
Christopher Larson
Marius Avram
Sujith H
Fahad Usman