Recently we renames the cross compilers as well as spun out
libgcc-initial from gcc-initial out. We need to also express
it in default tcmode otherwise defining GCCVERSION and/or BINUVERSION
outside OE-Core does not cover all cases
(From OE-Core rev: 82813d27640549255dc81a15d7fb63688431f747)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the mei meta data change from the yocto 3.14 kernel tree.
(From OE-Core rev: 2a39c6c11d9438a6d9cab9255e69c52779709e3e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We allow inheriting recipes to control the kconfig mode used by merge_config.sh
via the KCONFIG_MODE variable. An error crept into the variable reference, and
since it is not quoted, the true condition always runs.
The result is that operations without an explicit kconfig mode cannot trigger
allnoconfig for defconfig builds, which can result in some options being
dropped from the final .config.
Quoting the reference allows it to evaluate properly.
(From OE-Core rev: aad19e4381a8a09c354e5899885997c5b4cd115b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
make ldconfig default to /lib+/usr/lib, /lib32+/usr/lib32 and
/lib64+/usr/lib64 on bi-ABI architectures.
(From OE-Core rev: c90bb98d4ac14562ef4882691daed3aaa9d08504)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In poky with systemd enabled, vt102 is selected for getty
causing user to experience a very crappy terminal. Default
TERM to xterm.
Reviewed-by: Jonathan Liu <net147@gmail.com>
(From OE-Core rev: 473ff65c2f69de4ece3204fadfae7c5cb992149a)
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install gdbm test-suite and run it as ptest
(From OE-Core rev: aaba69d598763831e8b42996154ed87d0db10714)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnutls doesn't depend on libgcrypt anymore but
wpa-supplicant does. So add it as a dependencie.
(From OE-Core rev: b5e0e0589dba0e3eb6fa070594c904fec6e6c3a8)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removes not needed or already merged patches.
Removes unused configure flags.
Tells gnutls to use the included libopts.
Removes libextra (not needed since 3.0.5).
(From OE-Core rev: 4e360033579b9501449798b2d118f786816a557f)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the move from meta-oe to OE-core XDG based launched was dropped
without noting it in the commit message, so fix that regression.
Gnome-session will now launch the calibrator again.
(From OE-Core rev: 64e0c8a7585a36964988f2f00ac89eda514d5f7b)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's being used by e.g. gnome-session when Terminal=true is set in
.desktop files, like xinput-calibrator does.
(From OE-Core rev: 9a821d80b732a52574ac5c20b323966811828852)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It gets its wrong in detecting 64bit options
and OE we already pass the right options as compiler
defaults
(From OE-Core rev: ec3add1752a410fada04b4788c142b91ef63ffa3)
(From OE-Core rev: 32b826720626ec2d426ff7dbfe5607bc0dbd8082)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the structure to work with immutable bio_vecs
(From OE-Core rev: 09d3d8f97d6c60707b8dfb3fa5b04fa2efe6f6f6)
(From OE-Core rev: b32d57e5a807a634c411628af1688aec960ac6e7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use gcc-nm and gcc-ar to deal with slim objects
which are generated when using -flto
(From OE-Core rev: e6d84c9f4fef201217ada60711ecfb94bc5dc2e0)
(From OE-Core rev: 56dc32f128b3029c38381c7cc81f244fbd77416e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches explain the issue in detail but this is exposed
with gcc 4.9 in binutils 2.24
(From OE-Core rev: fc5c467b680fc5aef4b0f689e6988e17a9322ae0)
(From OE-Core rev: 4dfb8847ebf8aab90ad8888933468e2899c96998)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix upstream bug
https://bugs.freedesktop.org/show_bug.cgi?id=77060
gcc 4.9 now generates slim objects when LTO is used
These slim objects only contain intermediate language
representation for LTO. Use -ffat-lto-objects to create files which
contain additionally the object code. When linking some .so file, the option
'-flto' is missed, so the error happens.
We add '-ffat-lto-objects' flag to make gcc 4.9 behaves the same as gcc 4.8.
(From OE-Core rev: c4e65e14fbdf957aa34e074337c5649a0b0888b7)
(From OE-Core rev: 858f01ab9613c2b122718c350da763f8fe981d9f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The scripts extact variable values from bitbake -e. Unfortunately
TARGET_ARCH is unset from that environment so we use TUNE_ARCH instead
which will have the value we need.
(From OE-Core rev: b77494025b3d47fd5130ae6c445ac84cabb1f91e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mkhelp: generate code for --disable-manual as well
This allows configure --disable-manual to run and build without having
to regenerate the src/tool_hugehelp.c file which otherwise is necessary
since we ship tarballs with that file present.
(From OE-Core rev: 544a96255203a6779d1f0022d003c6680f330511)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a fix about to go into bitbake to ensure that datastores
being accessed with a name other than "d" are correctly reflected
in checksums. This will cause this function to add in a number of
dependencies we don't want.
These do need to be properly unravelled in due course but would
only really affect multilib builds. For now therefore just exclude
the variables as per the old behaviour.
(From OE-Core rev: cbc41a573dd3a073e7b862ca9d763ce815e8f927)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to remove the following uses of PRINC in meta-raspberrypi:
recipes-bsp/formfactor/formfactor_0.0.bbappend:
PRINC = "1"
recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend:
PRINC := "${@int(PRINC) + 5}"
(From OE-Core rev: cffbd11d915fe8a1399f23c97c4e2ecbdae4d00a)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Within the OE build environment, we supply the correct fpu settings. These
only need to be spelt out for the on-target gcc.
Doing this means the checksums for the core compiler don't depend on the fpu
settings. We exclude the compiler tunes for similar reasons, it doesn't need
to influence the compiler build.
(From OE-Core rev: ce1f3fd20d81545d6d5dfc68f86f9fddf8ac9bbf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we no longer build target libs within gcc-cross, we can drop the
TARGET_CC_ARCH flags and hence make it independent of tune.
(From OE-Core rev: 74d8866814aec520822518cc4cb8a942f7069bf7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PKG_CONFIG definitions should now more closely match those from native.bbclass.
We can't use ${libdir} here since it contains the target arch prefix.
(From OE-Core rev: aebb71afe54b266de39ec7e1caf84e6426aaafba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross technically depends on the C library however we can use
one toolchain for multiple different tunes within a given architecture.
Manually remove these dependencies so that gcc-cross isn't rebuild with
every tune change.
(From OE-Core rev: 97df4e8e61a7693d548c3145e36f1d5503e91d03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately expandKeys() notices overlap between the SDK and TARGET
PREFERRED_PROVIDERS entries when we set things up for the SDK recipes.
To avoid this, delete one of the sets of keys to avoid supurious warnings.
(From OE-Core rev: 9068a65baf4a28d04efad9297b16a2883ac42689)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should be explicit about the providers for the SDK toolchain so
add entries to do this.
(From OE-Core rev: fba380a2a37f04de04c0626c0a09cfe757c24341)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The metadata started using the bb.utils.contains_any which has been
add in the BitBake 1.23.0 release, set this as the minimal version to
ensure parsing compatibility.
(From OE-Core rev: dea40c2850a32b5b67e90336f9565889f92dabe8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update PREFERRED_PROVIDERS after cross tooling name change to include PN.
Also drop the now obsolete gcc-intermediate which no longer exists.
(From OE-Core rev: 5cbb5c12a5656915c3c9752187b54ef095d42828)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For use outside of tests themselves, we want a better error than
AssertionError, so create one and allow us to request it when calling
runCmd(). This enables us to avoid tracebacks during master image
operations if the power control command fails.
(From OE-Core rev: 89868383685091b0d3723fb8f29590f3f6610078)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we couldn't start the target, it doesn't make sense to try and stop
it here since logically it shouldn't now be in any kind of "started"
state. (It's the start function's job to clean up after itself if it
fails - to that end, fix up the QemuTarget class so that it does.)
(From OE-Core rev: 819ebddae6b78120e5e082423793ff988419b5c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of powering up the target when the object is constructed, wait
until deploy is called. Then there are basically two different
scenarios:
a) The device is booted into the master image already, in which case
we can just use it
b) The device is booted into another image or can't be contacted, in
which case we need to power cycle it. Here we also now wait until it
has booted up instead of trying to contact it immediately.
(From OE-Core rev: c2257fa50071e4704a8152b5f1d16f899b4bed98)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to power control command, this depends on a user's setup to get to
the serial port of a board. For a local connected board this could just be:
TEST_SERIALCONTROL_CMD = "picocom /dev/ttyUSB0 -b 115200"
and for a serial console server: "telnet 10.11.12.13 7003" or some conmux
command.
(From OE-Core rev: 5131094ad8f53b2052a97efd505e7a170d0c915d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And drop the un-needed and un-used restart methods.
Only qemu ever used this and actually does it safely.
(From OE-Core rev: 1dd1edb5ea551c8a01538b130aa4d0c361eae14d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now GummibootTarget is the only hardware TEST_TARGET with deployment,
but we will add more, so let's make an abstract base class, that will
do the common thing for all the hw targets.
(From OE-Core rev: 1d70b1908e1dc5d612b0627022659639e3f384e5)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Regardless of the numbering used in source archive filenames, the
upstream version number is in dotted form in documentation, release
notes and the website, so we need to be using that here since that is
what people will expect to see.
(From OE-Core rev: b8f82a8808b0d217815b30ed06efc8a0be4494a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the following patch(es):
* sysroot-arg.patch (changes included in release)
Correct the fccache.c license checksum and the line numbers because the
license snippet has moved and, also, at the previous upgrade the lines
were wrong (shifted a couple of lines).
(From OE-Core rev: cc337329309a6ad94a68b2813211a15040638c00)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in the TARGET_ARCH and SDK_ARCH suffixes from the gcc-cross changes.
The -intermediate toolchain parts were canned a while ago so drop them.
(From OE-Core rev: 8a733097bddcf0868fb5f8ca08ea59b2cbc4a3a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As far as I can tell this variable is now completely unneeded. It would
only ever get used in target builds and these are now correctly done
in the target environment namespace, not any of our cross environments.
As such, CC and other variables contain the correct compilers and other
tune options and these are correctly picked up when building libgcc,
libstdc++ and others.
I tried to figure out where else these would make any sense and couldn't
find anything. Builds appear fine without them so lets drop the complexity
including the patch adding in this flag to gcc.
(From OE-Core rev: 5484596f4252e707ff791feedf143a72dbb613f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This command modifies ${S} and can race against other tasks running do_configure and
having the scripts disappear from under them. To avoid this move to its own
task and work on the shared work directory as a common task.
It needs to be a python task to avoid lots of shell exported variables as
dependencies.
(From OE-Core rev: 55ed9ffbab5118140baac5d0d29dcc919e1f1668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the gcc builds are building copies of the target libraries
that we never use (it isn't installed in do_install). This is a rather
pointless waste of cpu time.
Instead just compile the host targets. Comparing the package output of
this compared to a previous build shows that the unwind.h header is
missing since its provided by gcc. Fix this simply by copying it in.
(From OE-Core rev: 19448a50c106684ee7e3862f759418c982363a29)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
(From OE-Core rev: a2c5509520d5c3e082f55844e6545d0309565f8f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been replaced by the class-cross override.
(From OE-Core rev: 7d6050c57f195589c8429397432c78f68298b672)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* there is issue for TUNE_PKGARCH missing in PACKAGE_ARCHS for machines
without thumb enabled, it was reported by Jacob Kroon on IRC
(From OE-Core rev: 1e1b42f687b5cd34623fe2682218958e1947eb92)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe does not explicitly set ARM_INSTRUCTION_SET, then there is no
need to throw a warning:
WARNING: Recipe 'foobar' selects ARM_INSTRUCTION_SET to be 'None',
but tune configuration overrides it to 'arm'
(From OE-Core rev: e457d71641af8802e47eb4854072e3cfb957b001)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for two optional plugins (smb & sftp), both require
other packages from meta-openembedded
(From OE-Core rev: 64c44f02f1a320399e2f02aeaf83022bf83b69c8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The check for the config variable is using the wrong define
resulting in the #else always being used.
(From OE-Core rev: 7e498c4c17e2c1b6928d4c1fd127977bb588991f)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently it wasn't working because *COMMAND variables were removed
from fetcher.
Now checkpkg sets the command internally and sends it as a parameter
to _runwget() function from wget fetch.
(From OE-Core rev: b9a51fc1901c378375cca041da27ddbd450c0412)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update ltp version to 20140422
Removed two patches that already exist in the current version:
1. regen-makefile.patch
2. ffsb-remove-hardcoded-configure.patch
(From OE-Core rev: d72430772400c7733da2339f238ab4ea69e48a8e)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log the output of the command as it runs not when it finished, else
tail -f tmp/work/minnow-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log
isn't as useful as it could be.
(From OE-Core rev: be8f766f43d85c364b9706b464ed0a59d0fbf0b7)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it will be inherited by most DEFAULTTUNEs, except few exceptions which
support only thumb and not arm
* respect missing "arm" in TUNE_FEATURES in feature-arm-thumb.inc, so
when recipe asks for "arm" and MACHINE supports only "thumb" ignore
recipe and try to build with "thumb"
* show warning when overriding ARM_INSTRUCTION_SET set by recipe from tune
config
(From OE-Core rev: 1250d3e009363d20f15bbfaced622c5912a7fb93)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install openssl test suite and run it as ptest.
(From OE-Core rev: c48981d2d24a20978a17866fa478dde21bd96b91)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cross packages are not packaged so we can drop all the packaging tasks
for some small performance improvements.
(From OE-Core rev: be07344397b383ab5e56048acb64eb56272fe95e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now Separated out libgcc-initial is there
(From OE-Core rev: 161bfc91e92a5080d3d4c27b3bebcd9c5dac01e1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If image contains dbus and ptest is in DISTRO_FEATURES, dbus-ptest package
is installed, regardless of whether ptest-pkgs is in IMAGE_FEATURES. This
issue will increase size for most small images.
This patch fixes this problem.
[YOCTO #5702]
(From OE-Core rev: 0416583f014138656babdf78a574357ae5ff25bd)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is done to work around the issue of auto-mounting block devices
(i.e. SD cards) when root filesystem is still in read-only mode and
creating /media/<device> mount-points by udev is not possible. That
is due to udev (/etc/rcS.d/S03udev) getting started earlier than
checkroot (/etc/rcS.d/S10checkroot.sh) gets a chance to re-mount the
rootfs as read-write.
Although, canonical FHS specifies /media/<device> as a mount point
for removable media devices, the latest 2.3 version was released in
2004 and since then FreeDesktop/udisks and other tools adopted the
new /run/media/<user>/<device> location. That was done to overcome
read-only rootfs limitation, since /run is usually a tmpfs mounted
partition, plus avoid name-clash between users.
For our embedded systems environment we assume single-user operation
and hence simplify mount point to just /run/media/<device>. But for
proper per-user mounting to /run/media/<user>/<device>, some sort of
session management is required along with the tool like udisks, that
is out of scope of this simple udev-based auto-mounting.
(From OE-Core rev: acfe3014d41de5e87cdbc58d0396349c6b9c3ffd)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This device list is only used if USE_DEVFS is set to '0' (which is NOT the default since 2013-12-14,
see commit f54fdd6673a136ee1cee1f3263a8a7820de43ca3) and if IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are not set.
This is, of course a very subjective list but minimal with 62 (special) files.
However, you should be able to boot correctly a lot of embedded linux around.
Changes:
- add sda, sdb, sda[1234], sdb[1234]
- add mmcblk0, mmcblk0p[1234]
- add rtc0, rtc1
- restrict maximum hdaX from 19 to 4 (pata is old)
- add ttyS1
- remove initctl, apm_bios, tty8, ttySA
- sorted entries
(From OE-Core rev: 72c011d272d0ffbd349858f16127058c74276866)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/usr/src/kernel/source deployed by kernel-dev package is symbolically
linking to a build-time kernel source folder, which make no sense when
cross-compiling.
Fixed by not populating it at install stage.
(From OE-Core rev: edb85a9589be54a1e9c980aa669a380222a76cf4)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds support for read-only rootfs to the bind service.
Basically it just bind mounts several directories so that the bind
service could start correctly without reporting any error.
(From OE-Core rev: 99cc96eaee28bfde89096689b1296d28937ead88)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches for opkg have been rebased using git so that they apply cleanly onto
the new release.
(From OE-Core rev: 354e25fe51a8e85122898d1849008ace5dbe9461)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake has the exact same code as oe.utils.contains so there's no
reason to duplicate it. We now rely on the bb.utils.contains code for
metadata.
(From OE-Core rev: 93499ebc46547f5bf6dcecd5a786ead9f726de28)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install openssh test-suite and run it as ptest.
(From OE-Core rev: 4d0ecccae671bffb40c870a6e33d20be869b89bc)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to separate out the native (cross) binaries from the target
compilation. We already do this for libgcc, this now takes the same
approach for -initial.
(From OE-Core rev: 8a2aaf8b6bdca2d28c0047093c7f668750d57666)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than building the whole of libgcc to obtain the unwind.h header
file, simply configure it and then install the file. This avoids copying
chunks of data around when we don't need to and building the same thing
twice.
After doing this we need to make sure the target build directory exists
in the libgcc case since it will no longer be created automatically.
(From OE-Core rev: 459e4dc25462771038459567c22e87d4cd38b117)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prepare the ground for the creation of libgcc-initial by splitting common
libgcc code into a libgcc-common.inc file.
(From OE-Core rev: 7c9f4a22d5c14d768be872beb9fc798163d6d204)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a number of places it would be helpful to be able to copy trees of
files using hardlinks. This turns out to be harder than you'd expect
since there is no good single command that does this well and handles
all file types correctly.
Abstracting this into a function therefore makes sense, cpio seems
as good an option as any other.
(From OE-Core rev: 14ef03182e1e5fe7cf6b4112f29e6609631aa78d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TARGET_LDFLAGS is currently defined in bitbake.conf to contain
${TARGET_LINK_HASH_STYLE} which differs between MIPS and other
targets. Since TARGET_LDFLAGS is an exported variable it affects the hash
of every shell task even if it is not used.
We don't want native recipe tasks to have different hashes purely because
they happen to have been built in order to satisfy dependencies for
different MACHINEs since this causes lots of churn in the native sysroot
when switching between MACHINEs.
Making native.bbclass override TARGET_LDFLAGS to use BUILD_LDFLAGS ensures
consistent hashes and is a sensible thing to be doing anyway.
Although they don't appear to have the same detrimental affect on task
hashes TARGET_CPPFLAGS, TARGET_CFLAGS and TARGET_CXXFLAGS should be
overridden too.
(From OE-Core rev: 05a70ac30b37cab0952f1b9df501993a9dec70da)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depends on cryptodev-linux for providing a header file
(From OE-Core rev: b7587d2ef7642dcc248744ade8f85f815185e78c)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add systemd support for ppp.
The unit file mostly comes from ArchLinux.
(From OE-Core rev: e84f7ea24b08e3127b70731908b819fbdc1cbfd5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove patch that is now in the upstream version
Add new package for idiag libraries.
(From OE-Core rev: 407db800da02032e07e94b0b837a89cfb3e204a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And rename the PV to match the upstream versioning
This requires a PE Bump to ensure package versions don't
go backwards.
(From OE-Core rev: dbcb25038959e4cf252ba812176a112a49a382d5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we let configure look for sctp.h it might find it
on the host, so suppress the search with two cached
config variables.
(From OE-Core rev: 4aa6616661cc7a0eda4e9ba3e82a22472b444595)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'loadkeys' program defines its own yywrap()/yylex() functions,
there is no need to link with flex shared library.
(From OE-Core rev: 69a7c9345360b61eda79f818775656fc1aa9932c)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oprofileui-server recipe depends on avahi recipe. But avahi recipe
generates more packages and one of those packages(avahi-daemon) which
oprofileui-server expected to be available is not found into image.
A runtime dependency of oprofileui-server on avahi-daemon is required.
Upstream-Status: Pending
(From OE-Core rev: 1163b6e619102bea08c429e49a4792abfa234c1c)
Signed-off-by: Adrian Calianu <adrian.calianu@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Fixes CVE-2014-0333
2. There are changes in License checksums. This is due to new
contributor names being added to LICENSE and png.h file
contains version of the new release.So, license remains the same.
(From OE-Core rev: 270e82399915d1f620756e380464f984c8a2cda8)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to attempt recovery of a failed populate_sysroot_setscene,
we need to explicitly error exit an SSTATEPOSTINSTFUNC. So, we test
the return value of gdk-pixbuf-query-loaders.
(From OE-Core rev: 17bdb2538e6b723e11afb1079c71363603dba63d)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just one patch has some small changes because the new code
has another fix for unaligned access.
(From OE-Core rev: 1d82fb4f1980bbe3c9cf0fffb45702bddda73307)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix the HOMEPAGE
* Fix the SRC_URI, .tar.gz has gone, only .tar.xz now.
(From OE-Core rev: f441f0693670da976ca38fa85717878f6958a359)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 07c158691f298b1a561a73c40480176625f309d9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: cf1a4a8b1a0ece2f75fab9d79c69ce2726ef78b9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
*This updates lttng-modules for 2.4.1 and
it also fixes the build with 3.13 Linux kernel.
(From OE-Core rev: 023c2401677f9af6895887d6e8bca2fd1d730985)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous behavior defines a static set of modules that are built
into the grub efi executable. This works fine for a limited set of boot
environments namely the standard linux/initrd. This patch conditionally
assigns the same modules to a variable. This allows other meta layers
to add additional modules or completely override the defaults. The use
case driving this patch is the use of multiboot2 and related modules.
(From OE-Core rev: 597f8e0040ba3135220000b23767858c64b5c9b8)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you do a readelf -x .rodata /path/.../to/openssh/6.5p1-r0/packages-split/openssh-sshd/usr/sbin/sshd
You'll see two references to OE's sysroots/${BUILD_SYS} login and passwd binaries.
First one can be overridden with LOGIN_PROGRAM environment variable (see configure.ac),
second needs a cached variable definition.
(From OE-Core rev: 2127c80d0cc2a3a4d676bd3c0890454a175fba8e)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debugedit errors out on bare metal binaries. The first version of this patch limited it to 64 bit targets, but the problem now shows up on 32 bit targets (minnowboard) as well.
(From OE-Core rev: f95c7611007ddda3fe36db90168c7d5de096f9cd)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xfce terminal was renamed 'Terminal' -> 'xfce4-teminal' mainline end of 2012,
so the distros supporting 'Terminal' will dissapear. The distros not
mentionied in __init__ do (e.g fedora 19 - tested) fail - or will fail
sooner or later.
(From OE-Core rev: d07f3812ec371da6f18fa1dd920cdde470bd89ad)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.14 SRCREVs to import the following changes:
- enable AUFS: a missing Kbuild patch was preventing aufs from compiling
- edgerouter: remove RTC configuration options
- preempt-rt recipe. The patch for 3.14 is availble, so we populate the recipe.
(From OE-Core rev: 8e38a24a9d9cd44733a25d3de307907a788d643d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running 'bitbake -e' without further arguments causes a stack trace on stderr:
| ERROR: Command execution failed: Traceback (most recent call last):
| File "[...]/bitbake/lib/bb/command.py", line 99, in runAsyncCommand
| commandmethod(self.cmds_async, self, options)
| File "[...]/bitbake/lib/bb/command.py", line 405, in showEnvironment
| command.cooker.showEnvironment(bfile)
| File "[...]/bitbake/lib/bb/cooker.py", line 453, in showEnvironment
| logger.plain("\npython %s () {\n%s}\n", e, data.getVar(e, envdata, 1))
| File "[...]/bitbake/lib/bb/data.py", line 89, in getVar
| return d.getVar(var, exp)
| File "[...]/bitbake/lib/bb/data_smart.py", line 522, in getVar
| return self.getVarFlag(var, "_content", expand, noweakdefault)
| File "[...]/bitbake/lib/bb/data_smart.py", line 612, in getVarFlag
| value = self.expand(value, cachename)
| File "[...]/bitbake/lib/bb/data_smart.py", line 350, in expand
| return self.expandWithRefs(s, varname).value
| File "[...]/bitbake/lib/bb/data_smart.py", line 340, in expandWithRefs
| raise ExpansionError(varname, s, exc)
| ExpansionError: Failure expanding variable can_delete_FILESPATH, expression was def can_delete_FILESPATH(cfgdata, d):
| expected = cfgdata.get("FILESPATH")
| #expected = "${@':'.join([os.path.normpath(os.path.join(fp, p, o)) for fp in d.getVar('FILESPATHBASE', True).split(':') for p in d.getVar('FILESPATHPKG', True).split(':') for o in (d.getVar('OVERRIDES', True) + ':').split(':') if os.path.exists(os.path.join(fp, p, o))])}:${FILESDIR}"
| expectedpaths = d.expand(expected)
| unexpanded = d.getVar("FILESPATH", 0)
| filespath = d.getVar("FILESPATH", True).split(":")
| filespath = [os.path.normpath(f) for f in filespath if os.path.exists(f)]
| for fp in filespath:
| if not fp in expectedpaths:
| # __note("Path %s in FILESPATH not in the expected paths %s" %
| # (fp, expectedpaths), d)
| return False
| return expected != unexpanded
| which triggered exception AttributeError: 'NoneType' object has no attribute 'split'
Removing the commented second line in can_delete_FILESPATH() hides the error.
(From OE-Core rev: a84c36e0e5e8332ddc5a6c34e1f598d5cb87cee2)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* parsing ICE_PATH="${@icc_path(bb, d)}" causes "ice" directories
to be created in every sysroot, that could be a bit confusing for
people who inherit icecc.bbclass, but disabled it
* shorten ICECC_VERSION="${@icc_version(bb, d)}" path a bit
by returning sooner when disabled
* remove ICECC_PATH and ICECC_ENV_EXEC from signatures, we assume that
using icecc doesn't influence the output, so it shouldn't matter when
user supplies own version of icecc or env script
* always compare ICECC_DISABLED with "1", boolean typed_value isn't used
because documentation already mentions using empty value to keep icecc
enabled and that's not valid boolean value when oe.data.typed_value is
used:
ERROR: ICECC_DISABLED: Invalid boolean value ''
(From OE-Core rev: c3e8bfe30685e2357a6eb3ba8f4a014c7dc9f58e)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
| groupadd: 'systemd-journal-gateway' is not a valid group name
Without useradd-staticids enabled, group 'systemd-journal-gateway' is created
by useradd and that seems not to care for GROUP_NAME_MAX_LENGTH which has 16 by
default.
(From OE-Core rev: 33c7892326de296cc6d143577be5b395ac887d91)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the free space of the host works when
oe-selftest is the only build running, but if something else
on the host remove things this will fail (as seen on AB).
Using an absurdly high value should fix this.
(From OE-Core rev: 413fc934fadbd3603b7f78dfd3cc0ac83bb0377f)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we have opengl in distro features but not x11 and try to
build libav then it calls out to build libsdl which inturn has depependency on libglu
and libglu fails to build
ld: error: cannot find -lGL
| collect2: error: ld returned 1 exit status
| make: *** [libGLU.la] Error 1
| ERROR: oe_runmake failed
since libglu wants glx enabled in mesa and glx in mesa is (righly) enabled only when x11
is in distro features.
This breaks the dependency chain leading to this problem
(From OE-Core rev: fe9fe5ca5039743fc80d14f0518b95929c458b1a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* | No package 'dbus-glib-1' found
| configure:11865: error: Package requirements (gtk+-2.0 >= 2.18, glib-2.0 >= 2.6,
dbus-1 >= 0.76, dbus-glib-1 >= 0.76 gmodule-2.0) were not met:
* introduced in:
commit 5c1eeb5d16566521e45947b07fdcd9f552fec45b
Author: Alexandru Palalau <alexandrux.palalau@intel.com>
Date: Thu Feb 27 12:05:41 2014 +0200
libnotify: don't use gnome.bbclass
because gnome.bbclass was adding gconf->dbus-glib dependency
* it was also causing other recipes to fail when they were depending
on libnotify which has dbus-glib in pkg-config and dbus-glib was
missing, e.g. firefox:
| checking for libnotify >= 0.4... Package dbus-glib-1 was not found
in the pkg-config search path. Perhaps you should add the directory
containing `dbus-glib-1.pc' to the PKG_CONFIG_PATH environment
variable Package 'dbus-glib-1', required by 'libnotify', not found
| configure: error: Library requirements (libnotify >= 0.4) not met;
consider adjusting the PKG_CONFIG_PATH environment variable if your
libraries are in a nonstandard prefix so pkg-config can find them.
(From OE-Core rev: abb2571a6352fc33a8b78ab0886d443894cda3b6)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While multible hosts sharing a common sstate cache, the fist host using
bash as default shell and build apr, the second host using dash as
default shell and build apr-util, there was a failure in apr-util:
...
| /bin/sh: 0: Can't open i586-poky-linux-libtool
| make[1]: *** [dbm/apr_dbm_gdbm.lo] Error 127
| make[1]: *** Waiting for unfinished jobs....
| make[1]: Leaving directory
`tmp/work/i586-poky-linux/apr-util/1.5.2-r0/apr-util-1.5.2'
...
The quick way to reproduce the defect in Ubuntu 1204:
1. Create a new build
2. sudo dpkg-reconfigure dash <set bash as /bin/sh>
3. bitbake apr
4. sudo dpkg-reconfigure dash <set dash as /bin/sh>
5. bitbake apr-util
Remove the use of $(SHELL) in the apr could avoid this issue.
(From OE-Core rev: 53af71200b6f6d117e1e7dc2e7a7d21c6faab8f9)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster may look up inexistent file paths in the build history
for packages that have been referenced but not built.
This triggers a failure, and this patch recovers by deleting
the reference to the non-built packages.
[YOCTO #6063]
(From OE-Core rev: 6bc4a0311cc3cd3f696d9dbca8fc0ef4e3bc340b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
(From OE-Core rev: cd495307d233b81ebeb43198d13bbd4b3ad7407f)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the meta SRCREV to pick up the following two fixes:
928d7b2ddad0 beaglebone: enhance USB support and enable MUSB modules
fbe38387ac61 beaglebone: enable DRM for HDMI output
(From OE-Core rev: c95ae50dc0817fee291ca981c41cb556bf7db582)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the intel configuration fixes from Darren Hart:
a82ccc635e7a meta: Purge retired BSPs chiefriver, sys940x, and atom-pc
b50ba1e37c26 x86: Drop X86_32 configs
8aa0a946f528 x86: Move MTRR config into x86 common fragments
ddae217aefee common-pc: Remove SMP from common-pc*-cpu fragments
f3ad83aa4c39 x86: Consolidate common x86* CPU features
(From OE-Core rev: 399d3d51f35fd8782367e82c7b6e641f32396f80)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to incorporate the intel common preempt-rt kernel
support.
(From OE-Core rev: 63de385a2dce1727d6d4b42dfdf8cb38d8ae5792)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 SRCREVs to pick up 3.10.35 and a LTSI cherry pick that
fixes a boot issue with the emenlow.
(From OE-Core rev: f0990363aaeb3f8f7a8e02fc2acb0af2171e4eba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to integrate the latest korg -stable update.
(From OE-Core rev: c6fe4b287c204d31a9ab86e3f38336d8828903ee)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We recently added multiple provider warnings. These could get issued
from -cross recipes due to the way these currently overlap in the
native sysroot. Filter out these warnings for now, until such times
as we improve the cross recipes so they don't have an overlapping
namespace.
(From OE-Core rev: d62f8d428831cc62b395f4c764c1e876353ddede)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without "-P" df splits the output on multiple lines and breaks the test
(From OE-Core rev: 81a81807d34e4b2ea28d8ba9c29e5b48a14bbc1f)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two places unwind.h is installed, even by the Makefile's admission.
Disable one of them to prevent build failure races.
(From OE-Core rev: d3b02218dcfedda8e4efb43b8fa6d13af8d91f78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although somebody we depend on might cause pkgconfig-native
to be built, we should not rely on that.
(From OE-Core rev: ed4b26cf312360e0eb1b0fbec5b039b939d9823f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you build perf in tree /xxx/treea, then cleansstate perf and build it
in /xxx/treeb having deleted treea, the build will fail, unable to find libc.
The problem is that the --sysroot option passed in through CC is missing.
This works fine if the default sysroot is ok, if it isn't, things will fail.
In 1.7 we'll start poisoning the default sysroot in gcc to catch this kind of
issue however that doesn't fix the problem with perf.
The problem is that various Makefiles set CC = $(CROSS_COMPILE)gcc. The
easist fix for now is to sed out the problematic Makefile lines. Its worth
noting the tools/lib/traceevent Makefile has a much more funky way of setting
CC which works for us and may be the way we need to fix the other Makefiles
upstream.
This fixes build failures we're occasionally seen on the autobuilders.
(From OE-Core rev: d9bd1ac6d91de932dd3e2fcac9da77e0a7c09f55)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Delete "<<<" syntax of bash in Makefile, else we would get following error:
Syntax error: redirection unexpected
[YOCTO #6112]
(From OE-Core rev: c2892fa27d9918aa4ce00a106a254ddfd44aa0f1)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The readonly sshd config sshd_config_readonly needs to be created from
the installed sshd_config as make install will adjust the paths in
the config file. This fixes the path for sftp-server being correct
in sshd_config but incorrect in sshd_config_readonly.
(From OE-Core rev: 400b4bce34ffb76e500e2195104cc200218aa4c3)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sed expression was also replacing documentation text containing
PermitRootLogin in the line so "PermitRootLogin yes" was specified
twice.
(From OE-Core rev: 0572196158d9505a624bdee71760978f284728b0)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While the BSP is configured as a 64-bit kernel and 32-bit userspace,
add a 64-bit version of libpam to the filesystem, there was a failure:
...
| Computing transaction...error: Can't install
pam-plugin-unix-1.1.6-r2@lib64_x86_64: no package provides libpam-lib64
|
| Saving cache...
...
While using 'lib64' as the multilib suffix of libpam RPROVIDES , the
RPROVIDES was overridden by map_depends_variable in classextend.py.
...
$RPROVIDES_lib64-libpam [2 operations]
set data_smart.py:429 [finalize]
" libpam-${baselib}"
set classextend.py:71 [map_depends_variable]4532
"lib64-libpam"
computed:
"lib64-libpam"
RPROVIDES_lib64-libpam="lib64-libpam"
...
Rename the suffix could fix this issue.
[YOCTO #4532]
(From OE-Core rev: 77e3d60fa00a41424fe65977b2bf307727a5a26c)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When both bash and busybox be installed, without ash support
in busybox,if bash is installed before busybox in the final stage,
even if ALTERNATIVE_PRIORITY of bash > ALTERNATIVE_PRIORITY of busybox,
the symlink from /bin/sh to bash can be yet overwritten by busybox.
(From OE-Core rev: 6ef650359cc2a49376eb5ca92bc97b34cdd82862)
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A remote user can send specially crafted data to trigger a buffer overflow
in socket.recvfrom_into() and execute arbitrary code on the target system.
The code will run with the privileges of the target service.
This back-ported patch fixes CVE-2014-1912
(From OE-Core rev: 344049ccfa59ae489c35fe0fb7592f7d34720b51)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport the patch to fix invalid preprocessing directive errors.
nls: always use XCOMM instead of # for comments in Compose.pre files
[YOCTO #6116]
(From OE-Core rev: 9d142a7f523f89cd65bef2cd6ce75e4f4500711b)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ftconfig.h conflicts between 32-bit and 64-bit versions.
(From OE-Core rev: 590446f6b191b32efc462c3cb7ac7cce4c897b05)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ext2_types.h conflicts between 32-bit and 64-bit versions.
(From OE-Core rev: e5bae3426856f9d2fdb604278154b6242011d103)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The trigger for the upgrade was the serious "heartbleed" vulnerability
(CVE-2014-0160). More information:
http://www.itnews.com.au/News/382068,serious-openssl-bug-renders-websites-wide-open.aspx
Dropped obsolete patches, because the new version contains them:
0001-Fix-for-TLS-record-tampering-bug-CVE-2013-4353.patch
0001-Fix-DTLS-retransmission-from-previous-session.patch
0001-Use-version-in-SSL_METHOD-not-SSL-structure.patch
Modified 2 patches (small changes), in order to apply properly:
initial-aarch64-bits.patch
openssl-fix-doc.patch
Addresses CVEs:
http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-0160http://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2014-0076
(From OE-Core rev: ff52836e1838590eeec7d7658e15b21d83cf8455)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit 4bee0a93ed985b38c6b4eb605d8e16f5d7c82d51 I introduced an
unnecessary patch to do something that can easily be done without
patching.
The argument to disable building ccmake can be passed to configure provided
it is preceded by "--".
(From OE-Core rev: eaf176eaabb4c558ad76512b30b28ec97fd90bc6)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to CONFFILES should change the sstate checksum. To make that happen,
it needs to be listed in the list of package specific variables, therefore
add it.
(From OE-Core rev: 9db71fa03b9d5f5307b2d09e7aa89f46f622aa09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Relaced the key with the join between path and file name.
[YOCTO #6090]
(From OE-Core rev: 85ffc93becb31772107a5a63b09fd3c16160f3ca)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This moves the systemtap recipe to the current HEAD commit, in order
to get users past some bugs affecting ppc and arm.
Fixes [YOCTO #6016]
(From OE-Core rev: efac179f243459c53d0431fbcce92a3561b40956)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix the bootlogd init script header, to make chkconfig be able to work
on bootlogd
(From OE-Core rev: d1a7e5dbaa1217b692b46e2756c318e5aaa34f9d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that linking to the built-in.a file uses the 'nostlib'
option. Submitted to busybox mailing list here:
http://lists.busybox.net/pipermail/busybox/2014-March/080730.html
This has been accepted into upstream busybox so it will not be needed
for future versions.
(From OE-Core rev: fdfff57304e6641ef5a8db0fb456bfd46bf1e2dd)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the CCLD variable to ensure proper tuning parameters.
Notably when building on a x86-64 host with an i686 toolchain
there is an error building built-in.o because it is trying to
link 32-bit and 64-bit object files:
i686-pc-linux-gnu-ld --sysroot=/work/dmoseley/Mentor/amd-2014.05/build.genericx86-64-external/tmp/sysroots/genericx86-64 -r -o applets/built-in.o applets/ap
i686-pc-linux-gnu-ld: Relocatable linking with relocations from format elf64-x86-64 (applets/applets.o) to format elf32-i386 (applets/built-in.o) is not support
make[1]: *** [applets/built-in.o] Error 1
(From OE-Core rev: 088d2f0185da6648305b4719ee9cb0d2f2b37c6f)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, it would sleep 1 second when fail to add the user, this maybe
not enough when we use the sstate cache, as my test shows below, nearly
all the useradd actions are doing in the same minute when mirror from
ssate cache, and it would fail when the load is high, I got these time
by adding strace before the useradd for debugging:
2014-03-31 14:48:22.978079781 +0800 /tmp/log/pulseaudio.4.c
2014-03-31 14:48:22.028079813 +0800 /tmp/log/pulseaudio.1.c
2014-03-31 14:48:21.949079816 +0800 /tmp/log/pulseaudio.3.c
2014-03-31 14:48:20.903079852 +0800 /tmp/log/pulseaudio.2.c
2014-03-31 14:48:20.006079883 +0800 /tmp/log/nfs-utils.9.c
2014-03-31 14:48:18.876079923 +0800 /tmp/log/xuser-account.9.c
2014-03-31 14:48:18.824079924 +0800 /tmp/log/pulseaudio.0.c
2014-03-31 14:48:17.826079959 +0800 /tmp/log/xuser-account.8.c
2014-03-31 14:48:17.766079961 +0800 /tmp/log/nfs-utils.8.c
2014-03-31 14:48:16.794079995 +0800 /tmp/log/xuser-account.7.c
2014-03-31 14:48:16.735079997 +0800 /tmp/log/nfs-utils.7.c
2014-03-31 14:48:14.719080066 +0800 /tmp/log/xuser-account.5.c
2014-03-31 14:48:14.677080068 +0800 /tmp/log/nfs-utils.5.c
2014-03-31 14:48:12.621080139 +0800 /tmp/log/nfs-utils.3.c
2014-03-31 14:48:11.589080175 +0800 /tmp/log/nfs-utils.2.c
2014-03-31 14:48:10.242080221 +0800 /tmp/log/builder.0.c
2014-03-31 14:48:09.523080246 +0800 /tmp/log/nfs-utils.0.c
2014-03-31 14:48:09.488080248 +0800 /tmp/log/openssh.0.c
2014-03-31 14:48:09.485080248 +0800 /tmp/log/rpcbind.1.c
2014-03-31 14:48:07.590080313 +0800 /tmp/log/rpcbind.0.c
2014-03-31 14:28:15.437121590 +0800 /tmp/log/avahi.0.c
2014-03-31 14:18:19.067142238 +0800 /tmp/log/dbus.0.c
The nfs-utils and xuser-account are failed to add the user.
The useradd command needs two locks, passwd.lock and group.lock, it may
get one, but can't get another one if we look into these .c files, sleep
1 second is not enough, it needs more seconds, the reason is that, if
succeed, it doesn't have any side effects, if failed, we need wait for
more seconds rather than make it more crowding.
I've tried to use "sleep 5", but it didn't make much better since they
would sleep and wake up nearly at the same time, I also tried to use
"sleep <RANDOM seconds between 1 and 10>", that didn't make much better
,either.
I think that a better ways is sleep more and more seconds (up to 10
seconds) when failed, this can't fix the problem that they may do the
actions at the same time, but the logic is: if it is not crowding, sleep
less time should be OK, otherwise sleep more and more time.
Here is the testing result which seems much better:
2014-04-03 14:09:56.605185284 +0800 dbus.0.c
2014-04-03 14:09:39.899185862 +0800 rpcbind.5.c
2014-04-03 14:09:38.400185914 +0800 distcc.4.c
2014-04-03 14:09:35.206186025 +0800 pulseaudio.1.c
2014-04-03 14:09:33.979186067 +0800 rpcbind.4.c
2014-04-03 14:09:33.364186089 +0800 pulseaudio.0.c
2014-04-03 14:09:33.360186089 +0800 distcc.3.c
2014-04-03 14:09:30.996186171 +0800 avahi-ui.0.c
2014-04-03 14:09:30.298186195 +0800 distcc.2.c
2014-04-03 14:09:29.905186208 +0800 rpcbind.3.c
2014-04-03 14:09:29.410186226 +0800 avahi-ui.2.c
2014-04-03 14:09:28.239186266 +0800 distcc.1.c
2014-04-03 14:09:27.298186299 +0800 xuser-account.0.c
2014-04-03 14:09:27.032186308 +0800 distcc.0.c
2014-04-03 14:09:26.836186315 +0800 rpcbind.2.c
2014-04-03 14:09:25.846186349 +0800 nfs-utils.1.c
2014-04-03 14:09:25.752186352 +0800 avahi-ui.1.c
2014-04-03 14:09:24.779186386 +0800 builder.0.c
2014-04-03 14:09:24.746186387 +0800 rpcbind.1.c
2014-04-03 14:09:23.916186416 +0800 openssh.1.c
2014-04-03 14:09:23.848186418 +0800 nfs-utils.0.c
2014-04-03 14:09:23.594186427 +0800 rpcbind.0.c
2014-04-03 14:09:22.609186461 +0800 ppp-dialin.0.c
2014-04-03 14:09:21.817186488 +0800 openssh.0.c
[YOCTO #6085]
(From OE-Core rev: 9cedc786ba132935748bdca8bc33b56c366b531e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some time ago, the sstate name field was dropped. This code wouldn't have
worked since then. Makes me wonder if we really need it.
Anyhow, my last patch properly breaks it. This fixes the naming so
it works as designed again.
(From OE-Core rev: d282b276aa5e58d306be1c8ef9a985f2267a612b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A while ago we stopped supporting sstate names which were different from the
taskname. This patch finishes cleaning up some code remnants from that
which were causing data duplication and confusion.
(From OE-Core rev: 5a19863e389d28d8db4a86e409c1daa3c6b46eff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking at the code, its clear 'task' is meant not to have the do_ prefix,
however its also clear it can be left in through some code paths.
One result of this can be files not being cleaned from the sysroot correctly.
Fix this.
(From OE-Core rev: 3c912102fd9ea6b360f1af209da21e8f27b845c0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rule SETARCH_MAN_LINKS is used for the files under the sys-utils
dir, for example:
echo ".so man8/setarch.8" > sys-utils/linux32.8
but it depends on nothing so that the sys-utils dir may not exist, we
can create the sys-utils dir to fix problem.
[YOCTO #6115]
(From OE-Core rev: 4c46bfd703409bd55a781742e4afedf88da1124b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user changes the DEPLOY_DIR variable to set up a custom deploy
directory for images, packages, SDKs as explained in the documentation,
the variable SDK_DEPLOY does not take it into account and fallback to
TMPDIR as default. Therefore, SDKs were not found in the correct
location.
(From OE-Core rev: 0f043e9a3fdc4b489b55e0605fee01927854205a)
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The target gtk+3 does a native build in its "native" directory, we need
unset the target FLAGS for native build, otherwise, there might be build
failures.
(From OE-Core rev: 3f3e249b98182fa50358ade9278e3e26454275b8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
*fix the following error:
|stdbuf: failed to find 'libstdbuf.so'
*PKGLIBEXECDIR is the search paths for libstdbuf.so
|PKGLIBEXECDIR='$(pkglibexecdir)'
|pkglibexecdir='${libexecdir}/${PACKAGE}'
(From OE-Core rev: a0745234e78d9161d407f2157dc494fed4487d42)
Signed-off-by: Chunrong Guo <B40290-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that the dependency on lzo is deterministic rather than floating.
The configure option to libarchive refers to this library as 'lzo2' but it is
just called 'lzo' in OpenEmbedded.
(From OE-Core rev: 09d729a21a2404095279c717c88ac494e2e716d6)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the sstate-cache-management script does not remove populate_lic
sstate files, we should ignore them when checking for removed files.
(From OE-Core rev: 5debc2af6672841c126cec5d747e2e3c6407c8be)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport two patches from upstream:
use new readline function types (closes#20374)
Issue #20374: Avoid compiler warnings when compiling readline with libedit.
[YOCTO #6107]
(From OE-Core rev: a6b91ae7dec2edebc0eaea0592c42b1c455ad4d7)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit a83144bac8d67704ff66f5dc0fc56f5b63979694 (2014-02-11), USE_DEVFS is not considered anymore.
For compatibility, let's restore USE_DEVFS semantic.
Also add USE_DEVFS to documentation.conf.
(From OE-Core rev: d12a5e38a02abe3feb3db8ae5ffd9a5005124294)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 2adc9a3f1f1db284f7d91193ad77b3524e0e0d2c stopped ccmake being built
and that is the only part of cmake that relies on curses so we might as
well stop depending on it.
(Tested with a poisoned curses.h to prove that it is unused even if
present.)
(From OE-Core rev: 4f650b538924b1736783fec0de661ec16dc590b5)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bootstrapped cmake is called in such a way that it will automatically
enable building ccmake if curses is found. This tool isn't particularly
useful to us and it will cause build problems if ncurses-native is built in
parallel with cmake-native so let's just pass -DBUILD_CursesDialog=0 to
disable the feature altogether as the non-native cmake does.
Unfortunately this requires patching the bootstrap script since there
appears to be no way to get this option through.
(From OE-Core rev: 4bee0a93ed985b38c6b4eb605d8e16f5d7c82d51)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Basically part of the headers/libs are installed in
${D}(${libdir}/${includedir}) instead of
${D}(${libdir}/${includedir})/qt4
* http://lists.openembedded.org/pipermail/openembedded-core/2013-October/085815.html
is related, but doesn't fix the issue completely, so better
revert the commit which introduced this issue
[YOCTO #5414]
This reverts commit f7409a9fe83ba2535a43f39ed57cd78242a88557.
(From OE-Core rev: 2b6a1cf9c7e05d204df82aa962d3ae09744dd86a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it uses autotools but doesn't call autotools_do_install
* fixes QA warning:
gcc-4.8.2: The /usr/share/info/dir file is not meant to be shipped in a particular package.
(From OE-Core rev: 0b62f8b012d8a128f34bd85a26aa97ea939cbf64)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* unlike 0.5 version, this doesn't use autotools.bbclass which removes infodir automatically
* fixes QA warning:
ed-1.9: The /usr/share/info/dir file is not meant to be shipped in a particular package.
(From OE-Core rev: 205621e3b9358a455e73122941fbbdcde9b2f2a3)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* cmake doesn't have dependency on qt4/qt5, so these tests usually fail
but still can cause undeterministic results or build failures (when
OE_QMAKE_PATH_EXTERNAL_HOST_BINS is undefined or native qmake removed
while running the test in cmake)
(From OE-Core rev: 4f2dee0d8c2c3f60cb8f8021343e973cae31fc50)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no point in failing if DISPLAY isn't set if we don't
boot a qemu image when using a controller like SimpleRemoteTarget
or GummibootTarget.
(From OE-Core rev: 9fcd3af8626e1b0979b0cde745fe0880ccc50de7)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch had some new tool (hdajackretask) missing which were
triggering build failures in O.S. Systems' builder as:
,----[ Build error in a clean tmp, without x11 ]
| checking for GTK3... no
| configure: error: Package requirements (gtk+-3.0) were not met:
|
| No package 'gtk+-3.0' found
|
| Consider adjusting the PKG_CONFIG_PATH environment variable if you
| installed software in a non-standard prefix.
|
| Alternatively, you may set the environment variables GTK3_CFLAGS
| and GTK3_LIBS to avoid the need to call pkg-config.
| See the pkg-config man page for more details.
| make: *** [all] Error 1
`----
(From OE-Core rev: be37edbdfe1e1ad833155154cabdff16f1d4267f)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tuning file for PowerPC e300c3 is soft-float. In OE-classic it was hard-
float and it should be as the c3 has an fpu. I have modified the tuning file
to include both a hard-float version (using the existing ppce300c3 name) and
an optional soft-float version (called ppce300c3-nf).
The following patch also passes a "--with-cpu=e300c3" argument to GLIBC.
For this to have any effect the sqrt/sqrtf implementations added by the
"glibc.fix_sqrt2.patch" are required and also an additional "Implies" file
(added to the mentioned patch as a separate patch for eglibc_2.19).
Tested with eglibc 2.19 on PowerPC MPC5125.
(From OE-Core rev: 9d502ca8551fd461f869395b1b7e62d6dcf59a84)
Signed-off-by: Mats Karrman <mats.karrman@tritech.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pass GDK_PIXBUF_FATAL_LOADER to the sstate postinst and intercept so that any
problems are flagged as errors instead of being silently ignored.
(From OE-Core rev: 0a97b1571821848af11d8651c7145ed9592f9e31)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that gdk-pixbuf-query-loader failures can be identified as such (and executed
later, or run on the target) add a magic environment variable return loader
failures from main().
(From OE-Core rev: 8995c2cbb7a08c569d3e554b65f2bc3cc1682e2a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpam might miss ABI specific dependencies for pam-plugins-*, for RPM uses
generic names to check the packages depending on it and doesn't consider the
arch, which will lead to packaging issues in mulbilib build.
pam_plugin_hook is added because the plugin packages are dynamically
generated, so we need to manually process multilib names by add baselib to
RPROVIDES/RDEPENDS as ABI specific tag.
(From OE-Core rev: d08e64a98316d7659b0fb56812667c534f66a1a8)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
I worked with Ming Liu on this particular issue. You may wonder why
this is necessary let me attempt to explain the underlying causes.
In deb/ipk on a multilib package, the package name has specific multilib
references in it. I.e. the alternative libraries start with something
like lib32-... This was done primarily because deb/ipk do not allow two
packages with the same name (but different architectures) to be
installed at the same time. So the name has to be unique.
In RPM however, the names of the packages and matches with the
architectures and if they are not the same we can do these multilib
installs. This matches the behavior of other RPM based distributions
and in many ways the tools people are used to working with RPM. For the
most part this works fine in multilib configurations because additional
per-file dependencies are added that capture the shared library
dependencies with ABI specific information. This unfortunately fails in
a few cases where plugins are dynamically loaded via dlopen -- such as
libpam.
One possible fix is simply to follow the deb/ipk package naming, but
this causes a design advantage of rpm. When a package has a dependency
on 'bash', we really don't care what bash is installed, only that -a-
bash is installed. In the deb/ipk case, the lib32- packages would end
up with a lib32-bash dependency and you could potentially end up with
two 'bash' packages being installed.
So the fix I recommended for the issue was to add the baselib path to
the internal dependencies. Since we know that the libpam installed in
'lib' needs the modules that were compiled to also work with the 'lib'
version of libpam. While the libpam in 'lib64' need the modules to work
with the 'lib64' version of the plugins.
Existing dependencies are preserved so there is no impact in the ipk/deb
case, the RPM case is resolved as the additional dependency information
is now present for the package manager to select the package we really
want.
If anyone else has a suggestion for an alternative fix, we're interested
-- but this is the best answer we could come up with. (If any of the
above should be added to the commit message, the YP bug, or
documentation, please let me know and I'll make sure it gets added.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
[YOCTO #4532]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only build wayland-native for the scanner, so disable the bits we
don't actually need. This avoid build issue on older distro such as
Centos 5.x:
| error: 'O_CLOEXEC' undeclared (first use in this function)
| error: sys/timerfd.h: No such file or directory
| error: 'CLOCK_MONOTONIC' undeclared (first use in this function)
| error: 'TFD_CLOEXEC' undeclared (first use in this function)
| error: 'SFD_CLOEXEC' undeclared (first use in this function)
(From OE-Core rev: f6d5343ccb97913a874b894fd7405abad59746eb)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
O_CLOEXEC is introduced from Linux 2.6.23, so old kernel doesn't have
it, we need check before use.
This patch is much more like a workaround, since it may need fcntl() use
FD_CLOEXEC to replace.
(From OE-Core rev: 44c441222002ee0177100be0431adf91984e90d5)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a formatting fix, '=back' is required before
'=head1' on Ubuntu 12.04.
(From OE-Core rev: 362d20e04e64a7437d7f61761057c721066e805f)
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The machine can not work with memory over 256M, so add a checking
at startup. If the memory size exceed 256M, just stop emulation then
throw out warning about memory limitation.
(From OE-Core rev: 48ff812a4b649fa7b1c73740ef65e4855640dc39)
Signed-off-by: Jiang Lu <lu.jiang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qemu mips malta base board boot loader uses environment strings
with a max length of 256 bytes which is not long enough to accommodate
a long NFS path in addition to the normal kernel boot command line
arguments.
The solution is to expand the environment string length to 1024 bytes.
(From OE-Core rev: 1e9e26304b77dd11b30ec983b7fa058378b29c47)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
core-image-lsb only gave a warning:
"WARNING: Building libpam but 'pam' isn't in DISTRO_FEATURES,
PAM won't work correctly"
when the proper DISTRO was not set for it.
default choice would be DISTRO = "poky-lsb",
but not necessarily, depending on each custom distro.
This fix will enforce the proper usage of pam
as a distro feature for core-image-lsb by giving
an error instead of just a warning.
Fixes [YOCTO #6073]
(From OE-Core rev: f7cd6b383f50ebc3000a9d9db8be719ab5b3c0bb)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm sick of seeing people adding to EXPORT_FUNCTIONS in these classes
when they clearly have no idea what it does.
Worse, these uses of it are all broken, the naming is incorrect and
they do nothing. Lets remove them and try and preserve any remaining
part of my sanity.
(From OE-Core rev: 05a2fb19f722652c5d13be911b8ed45a264bbb40)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Seems wrong that qemux86 has this enabled and qemux86-64 doesn't.
Also this will allow people to use kvm with -cpu=host.
Right now, runqemu qemux86-64 kvm uses -cpu=kvm64 because without this
feature you can't use cpu=host on newer host kernels (>= 3.8).
This basically reverts poky e6149ec6c4 /
oe-core 64749308fadabb4aa7c39f360c6395827bc5eb3a
The reason of that commit (which is more than a year old) was that on
the AB running old kernels (2.6.37) we would see occasional shutdown failures.
(but if memory serves me right the fix might have been just a coincidence).
I've tested this change with by:
- run tests on runqemu qemux86-64 (without kvm) (300 seconds)
- run tests on runqemu qemux86-64 kvm (which uses by default cpu=kvm64) - (tests
took 20 seconds)
- run tests on runqemu qemux86-64 kvm with cpu=host - (tests took 18 seconds)
[ YOCTO #5956 ]
(From OE-Core rev: 4b09a1869895e4cd18e82b7d190fbfea3c7922af)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integer underflow in the xTrapezoidValid macro in render/picture.h in X.Org
allows context-dependent attackers to cause a denial of service (crash) via
a negative bottom value.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-6424
(From OE-Core rev: 059dc5f4ef9bcf49cb6520f5f2ab1e739f4d42de)
Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function disables the reverse DNS lookup on QEMU targets to reduce the
delay when using static IP address. By disabling DNS lookup we can save a great
deal of time during automated testing on the autobuilder (on the order of ~400
seconds per ssh tranaction). This is seen when using the testimage, there is a
delay getting logged-in from the server to target.
It's enabled for all qemu imgaes by default and can be overridden by setting
the SSH_DISABLE_DNS_LOOKUP variable.
[YOCTO #5954]
(From OE-Core rev: c93eeecb15c4acac9226a3394c93d7e99a809d6b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Duplicate parameters in the tune args are repeated in the
MULTILIB_OPTIONS variable. This leads to incorrect configurations
if the order of the parameters is bad.
(Eg. "mhard-float m32/mhard-float m64" leads to an incorrect config)
This patch finds the common parameters and removes the duplicates.
(From OE-Core rev: 90dc31c24adfa8e916a9c475ae1afc58ad179dfb)
Signed-off-by: Alexandru-Cezar Sardan <alexandru.sardan@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3.14 is now the reference for libc-headers. After building and booting 3.x based
BSPs against the 3.14 headers, we can safely remove the old version and patches
that are now part of the mainline kernel.
(From OE-Core rev: ade26bc63fdf89f297bec5f67bfff108e90438fc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce the 3.14 linux-libc-headers recipe, now that the 3.14 kernel is
available, and the default for the qemu reference BSPs.
The three patches which were required for the previous 3.10 libc-headers
are not required for 3.14 and can be ignored.
(From OE-Core rev: 6b25918ecce6d555632d9576e16ad443b5d1780a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of the 3.13 kernel bz2 compressed tarballs are not available. To support
older header tarballs, and newer ones that require the 'xz' compressed
bundles, we can break out a variable that allows versioned libc headers to
select the archive format that works.
(From OE-Core rev: 116228fceca7fc2a7b557133b1f8f28f41af1ee5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The release kernel for Yocto 1.6 is the 3.14 kernel, so we introduce
the versioned recipes here.
(From OE-Core rev: 92776093766d4b0bb2613214274fa28dc59b6126)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit c581059df88d5801cc20ab24a096e4a67b737d49.
The same thing was already applied at a slightly different place in the file.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of this module is to deploy a test image on a EFI-enabled hardware
and run our runtime tests. A bit of background:
- testimage.bbclass uses the concept of TEST_TARGET which is a class name
that is responsible for target deploying. A layer can provide
it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget
(ssh into an already up and running machine and run tests), the default one being qemu.
- basically testimage does something like:
target.deploy()
try:
target.start()
runTests()
finally:
target.stop()
This module assumes a running EFI machine with gummiboot as bootloader and
core-image-testmaster installed (or similar). Also your hardware under test has
to be in a DHCP-enabled network that gives it the same IP for each reboot.
One time setup (master image):
- build core-image-testmaster with EFI_PROVIDER = "gummiboot"
- install the image on the target
Test image setup:
- build your test image, e.g core-image-sato as you usually do, but with these in local.conf:
IMAGE_FSTYPES += "tar.gz"
- Now run the tests:
INHERIT += "testimage"
TEST_TARGET = "GummibootTarget"
TEST_TARGET_IP = "192.168.2.3"
bitbake core-image-sato -c testimage
Other notes:
- TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling.
The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like
TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf.
Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'.
The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected
to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being
that it accepts: on/off/cycle as the last argument.
- if no command is defined it would use classic reboot. This is fine as long as the machine
actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where
some manual interaction is okay from time to time.
[YOCTO #5614]
(From OE-Core rev: e00f888a88d0851b088c232dec66418e575a2e90)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj
Cristian Iorga
Bruce Ashfield
Martin Jansa
Ming Liu
Joel Fernandes
Maxin B. John
Fathi Boudra
Valentin Popa
Saul Wold
Koen Kooi
Richard Purdie
Tudor Florea
Paul Barker
Max Eliaser
Otavio Salvador
Paul Eggleton
Stefan Stanacar
Laurentiu Palcu
Jacob Kroon
Drew Moseley
Irina Patru
Chunrong Guo
Chong Lu
Denys Dmytriyenko
Matthieu Crapet
Chen Qi
Mike Crowe
Joe Slater
Mike Looijmans
Adrian Calianu
Koen Kooi
Cristiana Voicu
Robert Yang
Philip Tricca
Andreas Müller
Andreas Oberritter
Hongxu Jia
Alexandru DAMIAN
Alexandru Palalau
Jonathan Liu
Wenlin Kang
Tom Zanussi
Roy Li
Alexandru-Cezar Sardan
David Vincent
Chunrong Guo
Corneliu Stoicescu
Mats Kärrman
Ross Burton
Ting Liu
Baogen Shang
Jiang Lu
Jeff Polk
Kai Kang