Bitbake now allows the umask to be specified per task. The
following tasks will have a umask of 022 set by default:
do_configure
do_compile
do_install
do_package
do_populate_sysroot
do_rootfs
do_configure and do_compile need a umask of 022 set because -many- recipes
directly copy generated files out of recipe's build directory. Instead of
fixing each existing and future recipe, it was shown to be much easier to
just set the umask.
(From OE-Core rev: 0cfa7ebcf661aa0645c6d4d858b04946ebacb7e4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added these patches to the recipe to get it to work as desired:
Upstream patches from tmp & for-dragonn branches of repository http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
Also included the debian patches.
Nitin's patch to make the makefile cross friendly
And Xin Zhong's patch to improve mkfs.btrfs
(From OE-Core rev: 57a2140dc9673c65fea088fbd024fbd002e6937b)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix configure and Makefile to read the defaults.h and t-oe from ${B},
so that the ${S} can be shared.
* Change ${S} to the shared source directory.
(From OE-Core rev: c1ec5100da76d35afb91de7353599564e5b653dc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix configure and Makefile to read the defaults.h and t-oe from ${B},
so that the ${S} can be shared.
(From OE-Core rev: d8c6f6e01421455db30eeb4b0882720874dcb31b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patched is derived from Richard, make gcc use the shared source
directory during the different building:
1) Make gcc-cross, gcc-cross-initial, gcc-cross-intermediate and
gcc-runtime share the same source directory.
2) The source directory is ${TMPDIR}/work-shared/gcc-${PV}, for example:
tmp/work-shared/gcc-4.5.1
3) Fix do_clean to clean the shared source directory and stamps
4) gcc uses sed and creates config files against ${S} which means the
directory should not be shared. Change the way to make it work:
* The configure option --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS}
can replace the sed command, see the code in configure:
if test "x$with_headers" != x; then
glibc_header_dir=$with_headers
This has the same effect as the sed command:
sed -i 's:^\([ ]*\)glibc_header_dir=\"${with_build_sysroot}/usr/include\": ...
so add the --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS} to
gcc-configure-cross.inc( not add to gcc-configure-common.inc, since
not all the gcc building need this, the one which has its own do_configure
doesn't need it).
* Move t-oe from ${T} to ${B}/gcc, so that the patched Makefile.in
can read it easily, please see the commit for gcc-4.5.1 and
gcc-4.6.0.
* Use the defaults.h in ${B}/gcc instead of ${S}/gcc, and the patched
configure.ac(configure) can read it correctly, please see the
commit for gcc-4.5.1 and gcc-4.6.0.
* The gcc-crosssdk.inc used sed to edit ${S}/config/*/linux*.h
to change the GLIBC_DYNAMIC_LINKER, which made the source
incompatible. To make the source compatible:
- Use:
sed -i ${S}/gcc/config/*/linux*.h -e \
's#\(GLIBC_DYNAMIC_LINKER[^ ]*\)\( *"/lib.*\)#\1 SYSTEMLIBS_DIR\2#'
so entries in the files that look like:
#define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
would become
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
and we define SYSTEMLIBS_DIR in defaults.h.
NOTE:
#define GLIBC_DYNAMIC_LINKER64 (SYSTEMLIBS_DIR "/ld-linux-x86-64.so.2")
doesn't work in in the following define:
#define LINUX_DYNAMIC_LINKER \
CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
so use
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
5) Add do_configure_prepend to gcc-configure-common.inc and remove the
one in gcc-crosssdk.inc, this makes it easy to share the source,
otherwise we need do extra changes in gcc-configure-sdk.inc.
6) Use "cat > file <_EOF" to replace the "echo > file"
(From OE-Core rev: 934d38530c9a67562e53d4034aee5531f0f26750)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If image-prelink is being used, the system will automatically prelink
the target image. This avoids the need to run the postinst prelink
script at first boot. However, if the user has not enabled image
prelinking -- then we do enable the script to run on first boot.
(From OE-Core rev: a0ba05596a704a006ee7b97392c20b871085b1e6)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The versioned gcc binary gets installed and the needed binutils symlinks are made.
To make it fully work again the following is needed in kernel recipes/classes:
PATH_prepend = "${STAGING_BINDIR_TOOLCHAIN}.gcc-cross-kernel:"
(From OE-Core rev: 3f0ee65462acf199b69ed18897ca65755907340e)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also added Upstream-Status: tag to a patch.
(From OE-Core rev: 09f5db4581cc412204f1407be9eba36c1af7376c)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason --without-xz doesn't work the same as --with-xz=none.
We need this set to none, or configure will attempt to find an lzma
header which we might or might not have.
(From OE-Core rev: 43e499b0168eefed38a0883cbf2834f6a4622296)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest cross-prelink version tracks the prelink r190 SVN.
Fix two minor issues as well. If we remove the package, we would
unprelink the filesystem after the rm was finished. This is
incorrect.. we need to do this prerm.
Move the cron and cron configuration file to a new package split.
This item is not valid for most embedded users.
(From OE-Core rev: e8da02aeae4b3c1c2a805d63d6d0919d3034aba6)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of the files that end up in the gcc include dir and other
misc files scattered throughout the install get the build users
uid and gid.
(From OE-Core rev: db99a65b3e93dfacc27ea821c788f15b5de3a497)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've added more licenses from SPDX and corrected the gcc license
so that it is a. parsable and b. accurate to the SPDX standard.
I've also done some cleanup of license text and gdb's LICENSE
field.
(From OE-Core rev: e47343d12ee571281238bbf5663b074c0e32049f)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pygobject requires both python and pygobject-native for compilation. Without
python pygobject may fail to compile.. and items that depend on pygobject will
fail to compile.
(From OE-Core rev: 319610d5bf61108f2ecc538c7a5de5b7c85a6684)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python was missing a lot of debug information. Switch to use the default
-dbg package. Also add some additional debug information to the -dbg package.
(From OE-Core rev: 63f4e1b469046753009d0cef498ef09c87c54912)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Certain files were being missed in the -dbg package, fix this.
(From OE-Core rev: 5b4bdf20c60ca625c059237b5d70b57c6643e6ec)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mv of aclocal.m4 can only occur once, or it will fail. On a re-run of
configure this will fail.
(From OE-Core rev: 1e232db4f6e90577f75efabd279b6980277b9547)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This brings in new patches from 4.6 release branch
updates the comment section of existing branch to not
contain patch numbers.
Tested build on qemu for arm ppc mips x86 and x86_64
(From OE-Core rev: 3968f33b6542cf20cf63cf49bfbc033bd2486295)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1155]
I thought git-native could depend on perl-native-runtime and tests on
Ubuntu 9.04/10.10 and Fedora 13 show it could buid fine (looks these distros
install perl-ExtUtils-MakeMaker by default).
However Joshua reported on Fedora 15 i686 host, git-native can't build unless
he manually installed perl-ExtUtils-MakeMaker to the host.
This makes me think we may as well make git-native depend on perl-native.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
This reverts commit c553b3934f45db8a6e77cfc7673787db3cc64f85.
This change clearly breaks builds since subsequent patches
depend on changes this patch removes. Not sure what's going
on here but this change isn't correct.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This massively cleans up the dependency handling in the two classes
when interacting with BBCLASSEXTEND.
This change has a dependency on the bitbake override handling change
and also the existence of the RecipePreFinalise event.
(From OE-Core rev: f183c7cfe377fa6ed2777605c3590a9dda2060df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When pseudo is disabled, certain programs that call realpath may not
work properly. This was discovered when using the Qt MOC tool when
certain qmake project features are used.
[YOCTO #1150]
(From OE-Core rev: d1d87429d751e0bff115ff60d1b5fc55b8fa6249)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update both the core and pseudo_git packages to the latest 1.1.1 verison.
This fixes an issues where the call system() was not wrapped. This could
lead to issues where certain spawned commands broke out of a pseudo-chroot
and created files in the wrong place.
Also the update the 1.0 -> 1.1.1 adds additional capabilities such as
beginning support for MacOS X.
(From OE-Core rev: 9eaa9ed38a197be76317cd3e42f54d1808c3e971)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
.. since this is where collect2 seems to look for them. This seems like
it is really a bug in collect2, but installing the symlinks is an easy
workaround. Without this you get "could not find ld" errors when using -flto.
(From OE-Core rev: d69561d80a995a52f3c7abfdbfd183fc7846046d)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version of bison needs m4 1.4.16 or newer
(From OE-Core rev: 8aa07da69f4966afda40d77b1e8b83749c5d1c28)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And rebase the patches to the newer code.
(From OE-Core rev: aa24c1eda4b33b329d330c8bbb6d243dfd924f62)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update override naming (_native -> _virtclass-native) to disable perl
and python bindings when building native rpm, and adjust the DEPENDS to
match.
Perl bindings were, in fact, already disabled for both native and target
builds so it's only the python ones that have really changed.
(From OE-Core rev: a0fd5d332da24a1830ee7bd1030cfb5af384bb1c)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a keyword, Upstream-Status is case sensitive.
(From OE-Core rev: 874038469e28d011b60b2d4bfd5a6fada6e754c4)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1130]
This patch brings in a patch from gcc for the following issue:
http://gcc.gnu.org/ml/gcc-patches/2011-03/msg01477.html
(From OE-Core rev: 347c30801b6f935a6aefa5578d723a8afcf52790)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've cleaned up some odd license fields, fixed some license
names and corrected some incorrect licenses. LICENSE really needs
a pass through by the maintainers as some of the licensing is
incorrect.
Also, every license with Artistic should be gone through and noted as
which version of Artistic.
(From OE-Core rev: 4786ecdf7cd427089464dcb62579110d494e7cd7)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, compiler errors such as:
configure:33440: i586-poky-linux-gcc -march=i586 --sysroot=/media/build2/builds/rptest/b2/tmp/sysroots/qemux86 -o conftest -D_REENTRANT -Wl,-O1 -Wl,--as-needed conftest.c -lpthread >&5
/media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/as: /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../../usr/lib/libz.so.1: no version information available (required by /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/as)
/media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/ld: /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/bin/i586-poky-linux/../../../usr/lib/libz.so.1: no version information available (required by /media/build2/builds/rptest/b2/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.6.0/ld)
can be see. This is due to the compiler being built against the system
zlib, before zlib-native is built and in the sysroot. Once that has been
built it can confuse the linker depending on the relative library versions.
(From OE-Core rev: a04d50a0318cd16d5fb02a625d739e03b94e42b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PACKAGEFUNCS ?= "perform_packagecopy \
${PACKAGE_PREPROCESS_FUNCS} \
our py_package_preprocess is called after perform_packagecopy which does copy D to PKGD
so we change it to target version in D (image/) before populating sysroot (sysroot-destdir/)
while keeping Makefile.sysroot version in PKGD which was created before calling
py_package_preprocess, so both package for runtime and sysroot end wrong
* I haven't seen this problem on faster builder, I guess because do_package and do_populate_sysroot
can run in paralell and I was lucky that do_populate_sysroot finished before py_package_preprocess
was started, but if you build python step by step -c package first you should see it every time
* here is proof that with PKGD it works better:
$ bitbake -c cleanall python
$ bitbake -c install python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
grep: ./packages-split/python-distutils/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./package/usr/lib/python2.6/config/Makefile: No such file or directory
grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
$ bitbake -c package python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
grep: ./sysroot-destdir/usr/lib/python2.6/config/Makefile: No such file or directory
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
$ bitbake -c package python
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
* without this patch we have /usr/lib/ in image/sysroot-destdir and SYSROOT_LIBDIR in package/packages-split
$ grep LIBDIR= \
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile \
./package/usr/lib/python2.6/config/Makefile \
./sysroot-destdir/usr/lib/python2.6/config/Makefile \
./image/usr/lib/python2.6/config/Makefile \
./Python-2.6.6/Makefile \
~/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile
./packages-split/python-distutils/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./package/usr/lib/python2.6/config/Makefile:LIBDIR= /OE/shr-core/tmp/sysroots/om-gta02/usr/lib
./sysroot-destdir/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./image/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
./Python-2.6.6/Makefile:LIBDIR= /usr/lib
/OE/shr-core/tmp/sysroots/om-gta02/usr/lib/python2.6/config/Makefile:LIBDIR= /usr/lib
(From OE-Core rev: 2ba5ce85dcc3c6812b10073bfc4ab600ca169df1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently all components of elfutils dont compile with uclibc
but elfutils is one part which is needed by other recipes e.g.
gcc 4.5 to compile. we make adjustments so that when compiling
for uclibc targets it _only_ builds and packages libelf
use --enable-uclibc only when building for uclibc targets
The supporting patch is also needed for compiling with uclibc
to specify -lintl and -luargp on linker commandline
Add missing inherit on gettext
(From OE-Core rev: e21267f1837b25fec4443dbf4367e501639541bd)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the autotools patch is not needed anymore. The code which the patch was patching
is removed, and there is no use of the patch now.
(From OE-Core rev: 07c4246e107af50d6a9333445259b083f98ebdc0)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To be able to install into a disk, mtools are required thus we add it
as rdepends of 'syslinux' package.
(From OE-Core rev: 341fda24f968b225ae3d4bca5d7d03a8e1778494)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1062]
Due to failing fetch updated recipe and SRC_URI to use .bz2,
(From OE-Core rev: 87cf2da6373676293f2fdaaebbacc6890235368d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We enable gtk/gnome in distcc that code uses loadavg()
a function unimplemented in uclibc. Therefore for uclibc
we disable gnome and gtk+ features in distcc
(From OE-Core rev: 5436acabdf61f249dc1646eaa85b2654bc627aed)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
add DEFAULT_PREFERENCE = "-1" to disable git recipe
Added libx11 for GL support to DEPENDS
Use BROKEN to disable qemuarm and qemumips world build of qemu target
(From OE-Core rev: 1bedd7f3d73c2f9f179f4de4bfaea944a18e49b5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Upstream-Status tag to patches for the following recipes:
apmd
insserv
linuxdoc-tools
openjade
sgmlspl
at
sudo
(From OE-Core rev: 89ff546de3ce6b1c441f04d7a153c4f8d514a749)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move to meta-extras
Also remove yaffs2 from image_types.bbclass
(From OE-Core rev: 6a97657ae834945ae26e5933d29bd94d0f7fea67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gypsy: Add upstream status information for gypsy's patch
alsa-utils: fix upstream status typo
pulseaudio: add upstream status for pulseaudio-0.9.15's patches
hostap: add upstream status for hostap's patch
glibc: add upstream status for glibc's patch
glib-2.0: add upstream status for glib-2.0's patch
mtd-utils: add upstream status for mtd-utils patches
add upstream status for opkg's patches
mark add_vercmp.patch as inappropriate since the added function is not
used.
(From OE-Core rev: b0052e9467608cdc2e3b85f5b718e6b9c03d44ca)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for the following recipes:
pcmciautils openssl udev apt gdm
(From OE-Core rev: 552c9fa44c2a2bb94bcf83bff802773265a35a27)
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason guilt-native seems to have gone out of its way to refer explicitly to /usr, which breaks on micro.
Let's use ${prefix} instead.
(From OE-Core rev: e3ada06e13820539425a4780cd749bf974b96b6f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perl${PV} becomes hostperl when building for the target so we need a wrapper
on that too.
This is 1e255fbd296e95ff178d66c4a1fe4875a988d7e1 in OE.
(From OE-Core rev: 8e601cfb307bc9064a2478a87ad3097e21871ff7)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Upstream-Status tag to patches for the following recipes:
openssh
dbus-glib
expat
opensp
sgml-common
at
cpio (GPLv3 version)
libpam
icu
(From OE-Core rev: 0702602332ad63c2cfaa207516497bb0b75bfdf3)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FindQt4 module looks for Qt4 binaries to be able to gather the
paths used for compilation and also to be using during other processes
(translation update, translation binary generating and like) however
OpenEmbedded has renamed those to allow old QMake to be used in
parallel with the current one. This patch adds support for the
OpenEmbedded specific binary names.
(From OE-Core rev: 6317c91aacf55cd7757a4fad0346cb541e9a1c2b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python: update upstream-status for patches
binutils: update upstream-status for patches
gcc 4.5.1 4.6.0: update upstream-status for patches
autoconf: update upstream-status for patches
automake: update upstream-status for patches
bison: update upstream-status for patches
distcc: update upstream-status of patches
fstests: update upstream-status for patches
gdb: update upstream-status of patches
intltool: update upstream-status of patches
libtool: update upstream status of patches
linux-libc-headers: update upstream-status for patches
make: update upstream-status for patches
perl: update upstream-status for patches
python-pycurl: update upstream-status for patches
python-pygobject: update upstream status for patches
python-pyrex: update upstream-status for patches
quilt: update upstream-status of patches
tcl: update upstream-status for patches
gnu-config: update upstream-status for patches
gmp: update upstream-status for patches
(From OE-Core rev: a62fa9b213b09bf48c48499d2e3c66a9ee306deb)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The liblto_plugin.so file is not packages for the target recipe causing this
gcc failure on the target.
gcc: fatal error: -fuse-linker-plugin, but liblto_plugin.so not found
(From OE-Core rev: a121494f9bdebb940e3f2f121040988be6dca592)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tcf-agent: update its patch's Upstream-Status
screen: update its patch's Upstream-Status
which (GPLv2): update its patch's Upstream-Status
gnome-vfs: update its patch's Upstream-Status
libart-lgpl: update its patch's Upstream-Status
librsvg: update its patch's Upstream-Status
fontconfig: update its patch's Upstream-Status
freetype: update its patch's Upstream-Status
libxsettings-client: update its patch's Upstream-Status
libxcb: update its patch's Upstream-Status
libx11: update its patch's Upstream-Status
- remove 2 unused xim.patch.
libx11-trim: update its patch's Upstream-Status
libxcalibrate: update its patch's Upstream-Status
libxcomposite: update its patch's Upstream-Status
libxfont: update its patch's Upstream-Status
xtrans: update its patch's Upstream-Status
- remove abstract_socket_fix.patch as it's not used at all for long.
calibrateproto: update its patch's Upstream-Status
latencytop: update its patch's Upstream-Status
powertop: update its patch's Upstream-Status
settings-daemon: update its patch's Upstream-Status
gnome-settings-daemon: update its patch's Upstream-Status
libxklavier: update its patch's Upstream-Status
liblbxutil: update its patch's Upstream-Status
oprofile: update its patch's Upstream-Status and remove an unused patch
- delete xml_callgraph_details.patch as it's not used at all.
(From OE-Core rev: 94991fb73586887bfc740eacf190032dfb206a65)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hostap: add upstream status for hostap-fw-load.patch
lrzsz: add upstream status for lrzsz's patches
bluez: add upstream status for bluez's patches
bluez-dtl1-workaround: add upstream status for COPYING.patch
libgsmd: add upstream status for gsm's patches.
gypsy: add upstream status for gypsy's patch
libpcap: add upstream status for libpcap's patches
ppp: add upstream status for ppp's patches
libtelepathy: add upstream status for libtelepathy's patches
telepathy-python: add upstream status for telepahty-python's patches
wireless-tools: add upstream status for wireless-tools's patches
wpa-supplicant: add upstream status for wpa-supplicant
zeroconf: add upstream status for zeroconf's patch
glibc: add upstream status for glibc's patches
dpkg: add upstream status for dpkg's patches
makedevs: add upstream status for makedevs's patch
opkg: add upstream status for opkg's patches
opkg-utils: add upstream status for opkg-utils's patch
minicom: add upstream status for minicom patches
rpcbind: add upstream status for rpcbind's patch
which: add upstream status for which's patch
clutter-gst: add upstream status for clutter-gst's patches
flac: add upstream status for flac's patches
gst-ffmpeg: add upstream status for gst-ffmpeg's patch
liba52: add upstream status for liba52's patch
libid3tag: add upstream status for libid3tag
libmusicbrainz: add upstream status for libmusicbrainz's patch
pulseaudio: add upstream status for pulseaudio patches
db: add upstream status for db's patch
neon: add upstream status for neon's patch
taglib: add upstream status for taglib's patches
libetpan: add upstream status for libetpan's patch
libopensync: add upstream status for libopensync's patches
libopensync-plugin-evolution2: add upstream status for its patch
libopensync-plugin-syncml: add upstream status for its patch
libsyncml: add upstream status for libsyncml's patch
empathy: add upstream status for empathy's patch
wv: add upstream status for wv's patch
xournal: add upstream status for xournal's patch
(From OE-Core rev: 0f9f0518ac46c2f2beb0224e881ff136f1603d33)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1032]
The distcc source location moved from samba.org to googlecode.com
(From OE-Core rev: eb85a7440e5b313ef550c60545d2dcd12d620c84)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix makes ctypes build for python-native which may be needed by extensions
that utilize ctypes and use setuptools/distutils as their build system.
Tested building pyudev for beagleboard target using Ângstrom distro.
(From OE-Core rev: 58f8eb15eea892b2694478bbc71e8c907014509b)
Signed-off-by: Michael Lippautz <michael.lippautz@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usually only parts of syslinux are used by products and thus syslinux
can be greatly reduced in size. This changes does it as:
- syslinux: syslinux binary
- syslinux-extlinux: extlinux binary
- syslinux-mbr: mbr.bin
- syslinux-chain: chain.c32
- syslinux-pxelinux: pxelinux.0
- syslinux-isolinux: isolinux.bin
(From OE-Core rev: a9f35059b4b47cb014cfad0b6930fe59f44430e3)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a patch to fix
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2007-4091
[YOCTO #984] is partially fixed by this commit.
(From OE-Core rev: 3670f110aacebdde118b79d31aa15156330418c6)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When TARGET_PREFIX and TARGET_SYS didn't match up, the symlinks and
update-alternatives weren't working. TARGET_PREFIX is what we use when
configuring so it's what we should be using here.
This is 79b497edc0ce5d54db564818e59b690d3391d6ce from OE.
(From OE-Core rev: 371205d21723ec911a77d5e7c1ef51fb26d854f5)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When TARGET_PREFIX and TARGET_SYS didn't match up, the symlinks we made
were invalid. TARGET_PREFIX is what we use when configuring so it's what we
should be using here.
This is 05143e9b5d0a42e32ee0dd3c7fde482ff8d63f63 from OE.
(From OE-Core rev: c0d6ba1ead3e68509718bea09d0b4d5a49a5f73e)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Packaging is synced with OE .dev, but without the -large, thanks to pseudo we retain all (hard)links properly:
* git-perltools holds all the utils requiring perl and adds appropriate RDEPENDS
* git-tk holds the tcl/tk utils once they get activate
* git now packages /usr/libexec/git-core
The result:
8.5M ipk/armv7a/git_1.7.4.3-r2_armv7a.ipk
3.1M ipk/armv7a/git-dbg_1.7.4.3-r2_armv7a.ipk
4.0K ipk/armv7a/git-dev_1.7.4.3-r2_armv7a.ipk
12K ipk/armv7a/git-doc_1.7.4.3-r2_armv7a.ipk
136K ipk/armv7a/git-perltools_1.7.4.3-r2_armv7a.ipk
(From OE-Core rev: 56aa79cda92479466dbf4657ca9ea35212b88cf6)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SRCDAT should be SRCDATE, thanks Frans to point out
Cc: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
(From OE-Core rev: f680b0e81c7d40b42f1fb3bd3f0790d3b89ed563)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Update to 20110505
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is set of bugfixes that has been done on
FSF gcc-4_2-branch since 4.6.0 was released
They will roll into 4.6.1 release once that
happens in coming approx 6 months time then
we can simply remove them thats the reason
so use a separate .inc file to define the
SRC_URI additions
(From OE-Core rev: b0d5b9f12adbce2c4a0df6059f5671188cd32293)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in this case, those non poky distro can also use these recipe normally
(From OE-Core rev: 0a57bd226cdb8332707fa0f46fcf0b067f03701a)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes compilation/linking of python third-party extensions, i.e.
Extensions that ship with C code.
Problem:
Python uses distutils(-native) to compile third-party extensions. distutils
uses its own sysconfig module to get the options for compiling and linking.
Since third-party extensions have to be linked against this libpython it
important that -L points into staging. This is not the case because
distutils.sysconfig uses a special Makefile that is shipped with python
determine the paths. The Makefile is the same that would be used on the
target to build third-party extensions. It therefore points into /usr/lib
instead of staging.
Solution:
Stage a modified version of the Makefile where the paths (incdir, libdir) have
been replaced by ones that point into staging.
Side-problem:
The recipe actually should not stage files itself in do_compile, but rather
handle everything that needs to be staged in do_install. This is currently not
possible because python compiles itself using distutils-native. Distutils on
the other hand does only allow to add a path, but not to substitute it,
requiring a staged Makefile and libpython.so before the actual python
compilation is triggered.
The second step to solve this would be to either patch distutils, or split
python into python-initial and python. The -initial part could create the
Makefile and the library, while the main part focuses on the target.
For further references see:
http://lists.linuxtogo.org/pipermail/openembedded-core/2011-May/001752.html
(From OE-Core rev: 413e7e5a5d6db45a6fbca5044246d6696d9d5711)
Signed-off-by: Michael Lippautz <michael.lippautz@gmail.com>
Acked-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Thanks to Gary Thomas for his input on fixing this for Ubuntu 11.04
(From OE-Core rev: 041a10722b7311c57a03d5a032621d8c32e4fc7e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ubuntu has moved eglibc to /usr/lib/${arch}-linux-gnu and
/lib/${arch}-linux-gnu so we need that to be added to glibpth in
Configure.
Currently we set LD=ld in environment for recipes inheriting native
class. This overrides the LD settings in the Makefiles of perl and
it tries to link by calling ld which does not work since its using
-l<x> on commandline and ubuntu linker seems not to look into
the new location for these libraries. Its better to use gcc for linking
here anyway
[With tweak from Tom Rini to use CCLD, not LD]
(From OE-Core rev: 8ba700a4c593fd52bd01b6272b4c8285a71964f7)
(From OE-Core rev: 9260c1b9d04a88d15ab5376c7cd56f381fe3e53b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Further tweaks to Configure-multilib.patch for x86_64 vs x86
from Gary Thomas
Cc: gary@mlbassoc.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
groff-native is needed to ensure that configure finds
the groff-native binary instead of the host's groff,
this is to ensure the correct macros are used (-ms vs -mgs)
(From OE-Core rev: 1126e4daa69e3f365b060ef235b40e0f97a61705)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with git-native and rm_work enabled I've noticed git fetcher errors like:
warning: templates not found /OE/shr-core/tmp/work/x86_64-linux/git-native-1.7.3.4-r0/image/OE/shr-core/tmp/sysroots/x86_64-linux/usr/share/git-core/templates
fatal: Unable to find remote helper for 'http'
for every recipe using http:// for git repo
* after this change template_dir points to
/OE/shr-core/tmp/sysroots/x86_64-linux/usr/share/git-core/templates
without that workdir prefix
* haven't tested target recipe, but I guess it needs different fix or
maybe it worked before and gets broken by this change
[sgw: removed RFC comment, target patch to follow]
(From OE-Core rev: 4b2a6fa780567c0876540bb89af78d5c778985cb)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new bash logging class provides bbnote, bbwarn, bbfatal, and bbdebug
replacements (as well as bbplain and bberror) for the oe* equivalents. Use the
new bb* API in preparation to delete the oe* logging API.
This patch was automatically generated by a sed script. The result has been
visually inspected and used to build core-image-sato for qemux86.
(From OE-Core rev: a1f09fce5caba389d0484b169f0cde85d64514fa)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Recipe cleanup, added missing metadata fields and fixed
whitespace issues
* Added Upstream-Status to patches
* Confirmed that CVE-2003-0655 does not apply to this recipe
as rscsi is not packaged
(From OE-Core rev: f7c35ad6267c7dfd37bad9c7521488c329f879b5)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Contributed by Martin Jansa via OE
Fixes [YOCTO #1003]
(From OE-Core rev: 2870697f08c171f455dbba03dd529b8c4cf11937)
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add -luargp and -lintl to linker flags
* __mempcpy is not there on uclibc so define it to mempcpy
(From OE-Core rev: a991226ff160c20fd7a03fe3b53b36389d3ff1f4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable using UST since there are some compiler errors with
the newer version of lttng-ust 0.12, there may be other unknow
problems, so wait for upstream fixes.
(From OE-Core rev: b4a0124d2896276e115d20585dc0657da36a0846)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And changed the perl tarball URL to more stable cpan location.
(From OE-Core rev: 3a08c401f298095840a2aee9079845f5ff434410)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is initial set of patches for testing them out
The patches need documentation is pending
Some patches especially uclibc related are not
needed they must be dropped.
(From OE-Core rev: 26858099bc104efc3b3d15d9298018285c551b9a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PERLHOSTLIB var is used to build target perl. It let perl use the native
perl .so module files at the time of compilation of target perl.
These changes to perl make the PERLHOSTLIB variable also useful for
building perl modules to use native .so perl module.
(From OE-Core rev: f4d51e63c0df777bbcbe9ad160eb3ba41ae74c6e)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows qemu to build for the target in the world build.
Not sure this would make sense to run on the target.
(From OE-Core rev: 09a55b1d4354531afe692f2618bd4fa5bf2dec74)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a package is built, some installation scripts must be
performed on the target. In the case of a complete image,
these scripts are run by a separate step at init time, but
only during the first boot (other package install scripts
can just be run when the package is installed on the target).
This patch lets the distribution (or user) decide when these
postponed install scripts should run. The default is normally
near the end of init, but there may be times when it's beneficial
to run them earlier so the "when" can be overridden.
(From OE-Core rev: a46466893407d44dd16ab37ae70e1bee14bdde0a)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 70402b3c8bae6d4d22e4b91011a85dfe9d95d601)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "--enable-clocale=gun" option for gcc configuration explicitly for LSB distro
in order to make sure C++ library can use correct locale module.
Fixes [YOCTO #796]
(From OE-Core rev: 8fc7b1e8881872535379d99a8ff940249632b5f7)
Signed-off-by: Jingdong Lu <jingdong.lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unused variables trigger a warning in GCC 4.6 which are caught by -Werror as
used in the elfutils makefiles and therefore the build fails.
This patch adds some consolidated fixes from upstream to remove the unused
variables, they will no longer be required as of elfutils 0.152
(From OE-Core rev: 9207c918a1b2f9ddf69dd9508d6c011eba435486)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change does not work with previous versions of gcc.
This reverts commit a02eb31697cd977f3587f42bb09b8a9ebcca7a4b.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu 0.14 does not need --cross-prefix switch as it uses CC environment
variables (and friends) which contains the cross prefix already.
(From OE-Core rev: c9ead26abae18397fcf0e07ff278bb9052d5b8f3)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In GCC 4.6 the compiler no longer allows objects of const-qualified type to
be default initialized unless the type has a user-declared default
constructor.
Patch from Gentoo bugzilla: http://bugs.gentoo.org/show_bug.cgi?id=358021
(From OE-Core rev: 5e58a44ee5d5be814614cdcc147d1ce67a9a401d)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc 4.6 (as used in Fedora 15) adds some extra warnings which are
included with Werror. The new unused-but-set variable warning causes
an error in libasm of elfutils. Work around this by removing
unused-but-set from Werror.
(From OE-Core rev: a02eb31697cd977f3587f42bb09b8a9ebcca7a4b)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is already taken care by bitbake.conf
(From OE-Core rev: 59d0aed3615ce08203139137d70d38ea8b9fe9d9)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Import patch from OE to fix compilation on uclibc
Let inherit gettext take care of gettext dependencies
(From OE-Core rev: 417c41f3083df120cf745c274b487218828dd147)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to leavarage more emulations in oe-core
these targets needs to be built as well
Introduce new variable QEMU_TARGETS which
can be set by user to decide what all machine support
should be build into qemu-native
This one works adding same to qemu.inc does not
parse presumably a bitbake problem.
(From OE-Core rev: 62ced6b84bf650ce4cf101491614613ec8fc17af)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is a quick proof of concept to show how source code could
be shared between recipes which use ${B} to have a separate build
directory compared to source directory ${S}.
Issues:
a) gcc uses sed and creates config files against ${S} which means
the directory should not be shared. Need to change the way that works.
b) Could be extended to cover eglibc except there is a patch applied
against nativesdk versions which again makes the source incompatible.
c) Need to clean up the layout in work-shared and make a directory level deeper
to ensure patch separation.
d) clean task does not remove stamps
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ppc-hack patch is dropped.
* Other patches which were direct backports
or has been merged upstream in 0.14.0 are
also dropped
(From OE-Core rev: 97fbdfdbfb15de325fd148bcecc9187d0f778db5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GCC 4.5 ends up in an ICE when compiling libstdc++ pre compiled header
so we eliminate -feliminate-dwarf2-dups for gcc-runtime
(From OE-Core rev: e0eeb10144db74c0671acd684059e8a6f82a572f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In mirrors.bbclass we point into /pub but we don't in bitbake.conf.
All uses of KERNELORG_MIRROR look into /pub anyhow, so lets make
use of that.
(From OE-Core rev: 67a0c8f48b5ef2ae5fc712c9204e4e99818c8134)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ubuntu has moved eglibc to /usr/lib/${arch}-linux-gnu and
/lib/${arch}-linux-gnu so we need that to be added to glibpth in
Configure.
Currently we set LD=ld in environment for recipes inheriting native
class. This overrides the LD settings in the Makefiles of perl and
it tries to link by calling ld which does not work since its using
-l<x> on commandline and ubuntu linker seems not to look into
the new location for these libraries. Its better to use gcc for linking
here anyway
[With tweak from Tom Rini to use CCLD, not LD]
(From OE-Core rev: 8ba700a4c593fd52bd01b6272b4c8285a71964f7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is for fixing the x86-64 image name bug and also,
do_patch must be done before do_deploy.
(From OE-Core rev: 95e27a0f604796b30d7e7e1d58d0925942cfefa9)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the hardcoded perl binary can cause conflict between the files in the native
sysroot and those of the build system perl. By using perl from the environment
we can at least ensure a consistent perl environment.
Patches taken from OE.dev commits:
be21179c5321bd0afb9221f020ac12ad75c86a3b gnu-config: use /usr/bin/env perl instead of /usr/bin/perl in gnu-configize.in
edcdefbf6e0675c1bcc1fc4f464f654223380e50 gnu-config: update also bindir change to replace /usr/bin/env instead of /usr/bin/perl
(From OE-Core rev: a508e7c03840efcd5877f4185e8f024cedb9453f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note: Downgrading of m4 would require rebuilding of the autoconf
Fixed circular depedency with the newer autoconf
(From OE-Core rev: b581c965b4fbaaa819aa3809db037578f61a56eb)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #787]
Disable the repackage on upgrade/erase by default. This removes the warning
message:
error: cannot create %_repackage_dir /var/spool/repackage/1298783317
(From OE-Core rev: 3878ef5deacda480b7c689720733c03ef6b3c702)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for ipk files on ppc, the name should be powerpc. So does the
environment file name. For the tar file name, it should be ppc.
This patch is to correct the arch/machine name pair.
Related Bug#864
(From OE-Core rev: 9b94486c6cc7295ed872e3c03ea297c3f3c7dcdf)
Signed-off-by: Liping ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #784]
Imported more commits from the perl upstream tree
(From OE-Core rev: c3b74b0c3833541ab5e89a7f9597f1ef8a413a70)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to debug certain C++ items, you need the helper python
components. These components should live in the -dbg package, ensure
they are added to the recipe.
(From OE-Core rev: 285fbd8a206eee061e27f37430499fcbe1e7284d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We found some proxy server has wrong cache for long http file name.
It will cause fetching wrong ipk files from adt repo. To avoid this,
we use wget options --no-cache to disable all server side cache.
It will make the fetch speed slower, yet correct always.
(From OE-Core rev: 2e9e8af197671ae06de1bdc9201765b160869d60)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #815] Added --sysroot into COLLECT_GCC_OPTIONS to allow the
collect2 support user specifed sysroot.
(From OE-Core rev: 868f8d3dd04e3c6dbbce154742cf877fda460a3e)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gcc-runtime package will now create the proper dbg package. The
RRECOMMENDS change is required to deal with the default. This is
documented in bug 824.
(From OE-Core rev: 724137e50762f190438e8e87d3f0f9edd99ea11d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #795]
When we run library check of LSB on qemux86 and qemuppc, we got some failures
about 'libstdc++.so.6'.
Test environment:
Platform: Qemu-x86, Qemu-ppc
lsb image: poky-image-lsb-qemux86-test.ext3(Feb 26th, auto-build server)
Library check of LSB: 4.1.0-1
The error log:
Did not find _ZNKSt5ctypeIcE8do_widenEPKcS2_Pc (GLIBCXX_3.4) in libstdc++.so.6
Unmangled symbol name: std::ctype<char>::do_widen(char const*, char const*,
char*) const
...
found that some weak symbols ('W') change into local ('t') during link time
and be stripped. According to compiling log, the option
"-fvisibility-inlines-hidden" is used for gcc. And this option caused some weak
symbols change into local.
see http://bugzilla.pokylinux.org/show_bug.cgi?id=795 for more information on the bug.
(From OE-Core rev: 4bb281ef5f12096d0889ba8efcc3fd3bb0ed3b3c)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Jingdong Lu <jingdong.lu@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opgk option --force-overwrite is only a workaround for bug #547.
Now this bug is gone, so remove this option.
and also, the first opkg repo source is not useful, remove it.
(From OE-Core rev: e6c72db2ac5684dd2bb65207b2f3da7214f5dca7)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
See the longlinksfix patch for details but symlinks over 100 chars long
were broken in sdk tarballs and its due to problems in the inbuilt tar in
libbb in opkg. svn r596 has already fixed the problem.
(From OE-Core rev: 90d4624f0c5de6a35eace1f13c3e04df9737390c)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>