Added an entry in the glossary for INC_PR. Also updated section
"Package Revision Incrementing" to mention the use of INC_PR in conjuntion
with the PR and PV variables.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I am using "xxxxxx" task as the way to call out a specific task in the
text. Previously a mix of <function>xxxxxx</function> and the "xxxxxx"
methods were being used.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Because I am single-sourcing the bsp.xml file that is used both as
chapter 4 in the Poky Reference Manual and as the singe file in the BSP
Guide I removed the bsp.xml file that was local to the poky-ref-manual
folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Because BSP chapter (bsp.xml) is identical to the single file used
in the BSP Guide (also bsp.xml but in the bsp-guide folder) I have decided
to change where the Poky Reference Manual get the bsp.xml file. This commit
causes it to get the file from the bsp-guide folder instead of an identical
but separate bsp.xml file local to the poky-ref-manual folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There was a mis-matched list element in an ordered list near the end
of the chapter. I had an <orderedlist> tag matched with an </itemizedlist>
tag preventing the make.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
After moving BSP Guide into its own folder for documentation I discovered
a consequence of that. There are two separate bsp.xml files now: one
in the poky-ref-manual folder and one in the bsp folder. I had done some
good cleanup work in the version in the poky-ref-manual folder. This
commit reflects a 'meld' operation where I re-sync'ed the bsp.xml
file in the bsp-guide folder to be the same (almost) as the one in the
poky-ref-manual folder. There is still one slight difference between the
two files due to one's context as a stand-alone manual and the other as
a section in a larger book.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The xsltproc command in the Makefile now uses the XSL Customization
layer style sheet poky-ref-manual-customization.xsl for the style
sheet parameter. This method will allow for customization of the
HTML version formatting that might be unique for the manual. I have
added the new file to the file structure.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The xsltproc command now uses the XSL Customization layer style sheet
poky-ref-manual-customization.xsl for the style sheet parameter. This
method will allow for customization of the HTML version formatting that
might be unique for the manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I moved the XSLTOPTS variables to the top of the file so they will
be defined first. This is an attempt to fix the seemingly random
HTML runtime errors I am getting during the 'make html' command.
It seems to be consistently working now.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
In the Ref Images appendix there was a link to the section
"External Development Using the Poky SDK" section that did not work
due to the section id string changing. I fixed the link.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The Extending Poky chapter was referencing a non-existent BBFILE_COLLECTIONS
glossary term. I added the term.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added an entry for BBLAYERS in the ref-variables (glossary) appendix.
The Extending Poky chapter was referencing this variable and it did not
exist.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Removed a couple of redundant </ulink> tags.
Also indented the literallayout text by five spaces for formatting.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I found another redundant </ulink> tag.
I removed the word sections from within a section link in a couple of places.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added a section id to the 'welcom to poky' section that was missing.
Removed a redundant </ulink> tag that was not needed.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I created a new sub folder to hold the BSP Guide by itself so there are
three folders now for each of the Yocto manuals: BSP Guide, quick start
and poky ref manual. The new folder for the BSP guide is 'bsp-guide'.
It contains the bsp.xml file, its own Makefile, a bsp-guide.xml file,
and its own 'Figures' directory. The 'bsp-guide.xml' file that was
in the poky reference folder was deleted.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I completed general edits to the second chapter of the poky reference
manual. These edits went from section 2.4.5 through the end of the
chapter. They consist of text rewrites for more active voice and follow
general technical writing principles.
I completed the same types of edits in the third chapter of the manual
from the beginning through section 3.3.2.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Extensive language and consistency edits being applied to the manual.
During the 0.9 push I did not have time to make a pass through the
document.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I did a complete edit pass through this chapter. The manual has
not been fully edited from its original state. One critical technical
correction was corrected where the green-3.3 release was referenced.
I changed this to laverne 4.0.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Removed several blocks of text from section 5.1.2.1.1
"Installing and Setting up the Eclipse IDE". This text according
to Jessica was no longer needed.
I have inserted the Poky image in the front matter again because the
book is a Poky Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The image file was in the same directory as the main reference manual
files. So I moved the file into subdirectory "Figures" with other
figures.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I could not get the Yocto Project logo to appear correctly in the book
after the title. I also decided that since Poky is by no means
going away that this book should have that image associated with it
as it is the Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The "Using OprofileUI" section had a description of how to use a
pre-built UI and how to download and build one. Feedback from Jessica
Zhang suggested removing the instruction for using a pre-built UI.
All that remains in the first paragraph now is instruction on how
to download and build the UI.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added section 5.1.2.2 "The Anjuta Plug-in" into the Poky Reference Manual.
This section consists of sub-sections 5.1.2.2.1 "Setting Up the Anjuta
Plug-in", 5.1.2.2.2 "Configuring the Anjuta Plug-in", and 5.1.2.2.3 "Using
the Anjuta Plug-in". This information was in the original Poky Handbook
but had been removed by me since I thought it was not going to be supported
for the 0.9 Yocto Release. It has now been restored with a note indicating
that Anjuta will not be supported post 0.9 release.
I did some general text editing in each section for readability.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
It's no longer neccesarry to define THISDIR and FILESPATH in each bbappend
recipe. Should you need to reference extra files you should use FILESEXTRAPATHS
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Scott Rifenbark
Richard Purdie
Scott Rifenbark
Joshua Lock