Working with the meta-ros project we detected that the ROS nodes didn't launch properly
the reason was that by default apr_cv_mutex_recursive in apr is set to no and this leads
to the APRENOTIMPL return value of apr_thread_mutex_create in thread_mutex.c when
APR_THREAD_MUTEX_NESTED is requested via flags.
Added CACHED_CONFIGUREVARS += "apr_cv_mutex_recursive=yes" to sources/openembedded-core/meta/recipes-support/apr/apr_1.4.6.bb
to fix this issue. It has also been removed the mention of this variable in
meta/site/powerpc32-linux.
(From OE-Core rev: 20b9151f877978c086dcc8cbae7e0d9c9e89a45d)
Signed-off-by: Víctor Mayoral Vilches <v.mayoralv@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not mount /dev/dm-* by default via udev, this is the default
behavior for most distos and WRLinux4.x.
This resolved a problem with the sanity test failing due to seeing
the error while attempting to mount new logical volumes without fs.
(From OE-Core rev: 9a6cf08afd81c95abf13e6cf5e43bb8cd777edd9)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now can have a 'one-binary' version of busybox, or 'two-binary'
version of busybox, controlled by the 'BUSYBOX_SPLIT_SUID' variable.
This makes on-target upgrade a problem, as we have to support the
following four upgrading paths.
For convenience, in the following context, A is used to denote a
'two-binary' version of busybox while B is used to denote a 'one-binary'
version of busybox.
A --(upgrade)--> B
B --(upgrade)--> A
A --(upgrade)--> A
B --(upgrade)--> B
This patch makes effort to support the above four situations.
[YOCTO #4802]
(From OE-Core rev: 4e571e97750f3ac6a62cd0d2d10c08be98230630)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When do ipv6 ready test, some DAD (duplicate address detect) tests failed
since it expect IPV6 will be disabled, but not. even accept_dad has been
set to correct value 2. Further investigation shows the root cause is that
setting the kernel parameter happens after the NIC is upped.
Make kernel parameters be configured before the interfaces is upped, and
duplicate setting the kernel parameters does not have negative effect.
(From OE-Core rev: cabe22b9470e870e63b5ef1ec8349c67b0823abf)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The method was removed when the process for saving configuration
in Hob was changed. Replace the call with the right function.
[YOCTO #4793]
(Bitbake rev: b6aa2b63d71cbe82850a375381b2dbc750cf1905)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some versions of patch (e.g. 2.6.1.136-31a7 on OpenSUSE 12.2) will
refuse to patch a file via a symlink (probably a fairly sensible
security precaution). The "base/" subdirectory specified within the
ghostscript-9.05-NOT-check-endian.patch file was being lost by the
default application with -p1, but this was not caught on most systems
due to the symlink. Fix the path so that we always patch the file
directly.
Fixes [YOCTO #4773].
(From OE-Core rev: 96a009da2456a03c65c198d8dca7d2af8b228f4f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When external commands such as debugedit fail, it can be useful to see
their output, so use oe.utils.getstatusoutput() instead of
subprocess.call() to capture this and print it on failure.
(From OE-Core rev: 34179cc78b730ecb8ff3f4feb4beee2d17498ce3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix sstate relocation issues with debugedit failing during
do_package on the Yocto Project autobuilder.
(From OE-Core rev: b7c2e01753e4a09388a3282e534bcbd163cd6ef7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These flags add addition checks at compile, link and runtime to prevent
stack smashing, checking for buffer overflows, and link at program start
to prevent call spoofing later.
This needs to be explicitly enabled by adding the following line to your
local.conf:
require conf/distro/include/security_flags.inc
[YOCTO #3868]
(From OE-Core rev: ff0e863f2d345c42393a14a193f76d699745a2b9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class is inheriting qmake2.bbclass which exports OE_QMAKE_QT_CONFIG
pointing to the qt4 qconfig.pri when it should be pointing to the
qt4-embedded qconfig.pri.
(From OE-Core rev: ed78661e147780ceb1bc1e952b68740984d85971)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will enable the udev cache for sysvinit systems, which does improve post-first
boots.
(From OE-Core rev: 087d8ccd6eaf2795253b5cbeac171ad82489535c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
udev is brought in via packagegroup-core-boot
(From OE-Core rev: 580c555ef34f0abf07064990625122a13412ab0c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just as in f8ed7446755eeb88191e16749350efa1e7e6197c, tmux wants a single
argument for its command. This applies to the "split-window" command as
well as "new."
Note that this alone is not enough to fix the TmuxRunning devshell when
using pseudo because tmux does not preserve the environment that pseudo
requires.
(From OE-Core rev: 36fb9799d6a449d86acca3be354af56ad87c3151)
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some terminals may not pass the environment into the child process. This
is true when using "tmux split-window." If tmux is already running, it
will start the command with the tmux session environment, ignoring the
environment where the command was issued.
This could possibly be worked around when launching tmux by injecting
variables into the user's session environment or adding the variables to
the "update-environment" tmux setting. However, both methods would
permanently alter the user's session, which is undesirable.
By using a wrapper script, we have full control over the final
environment. Replace the env dictionary with an empty data smart that
will contain the exported variables and a wrapper function that execs
the original command.
(From OE-Core rev: 3bb96671e987ce8110ce98b9f6d9efc093f8d20e)
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid a QA failure and instead produce a sensible warning message if no
modules were built.
Fixes [YOCTO #4791].
(From OE-Core rev: 3ef5b19cbd7a90e11fc61223737b0b8e0e60b1a3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is now required by python-argparse-native as of OE-Core revision
8d0e84bdfaf63ad61be7b015dd55dacccfa9132c.
(From OE-Core rev: e9e03d44d6a402fecdf0d62ff09a1f6af9da10bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Automatically finding out the paths to VPN client programs does
not work when configure script is run so set the paths manually.
(From OE-Core rev: 6212703b826f4ba95196d9858a8fc033af623c7c)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git recipes are stable enough and contains the fixes needed
to run with modern systems e.g. systemd etc. Drop 0.9.33
We already use git as default.
(From OE-Core rev: 05ae8f181e4e1699cf8e5d8bc20b3cbd4b532edf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use kernel cfg management infra to manage kconfig
fragments.
Add fragments for locale and obstrack and enable them
by default
Drop aplready applied patches
Drop DP = -1
(From OE-Core rev: 7bcf53ddb2e1a7171545f544ee2443b06d7c3359)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENCE not LICENSE and -firmware not _firmware. (Upstream seems totally
inconsistent with these filenames, unfortunately).
(From OE-Core rev: 1c6fd89967a949903a5ebffa9c4df7b5c06d32d1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Much as I prefer en_GB spelling, we need to be consistent with the other
package names in this recipe. Thanks to Trevor Woerner for pointing this
out.
(From OE-Core rev: f8e4e91de69d5e2f92a122a596d7241546034386)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new standard for host distribution identification [1] is
/etc/os-release, and a number of newer distributions provide this file,
so add support for this in order to pick up more distributions.
Additionally, handle "rolling release" style distributions that don't
report a version number, e.g. Arch Linux.
With this change we can identify the most common distributions, so this
should satisfy [YOCTO #4271]. Note that this doesn't imply support for
these distros as build hosts, just that we can identify them.
[1] http://www.freedesktop.org/software/systemd/man/os-release.html
(From OE-Core rev: bff50b747cde04007ead65dde4207b16a8e1bf08)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few directories under /media were created by default, /media/card,
/media/ram, /media/realroot, etc.
These directories actually have no real usage now, thus removing them.
The /media/ram entry in the fstab is also removed, as mounting a tmpfs
over /media/ram in our system brings no benefit.
Note that a duplicate '/mnt' entry in dirs755 are also removed.
[Yocto #4774]
(From OE-Core rev: 458e76e470966d759067b2f6e6f00fa75a2963f3)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case of a read-only rootfs, we skip the process of generating
udev cache, as the data cannot be persisted between reboots.
However, it's possbile that the $DEVCACHE (default to /etc/dev.tar)
exists in a read-only rootfs, no matter how it's generated or installed.
In such situation, we try to use $DEVCACHE if possible.
Besides the basic changes in the logic of udev cache handling,
this patch also adds code to output more information if the udev
cache is not used and VERBOSE enabled.
This patch also changes the readfile function to readfiles function
so that it could handle more than one file at once.
(From OE-Core rev: 4ec1266e7e1aacdb9d3d0fc5cd6307b60df1731e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
start-stop-daemon should be called with '--oknodo' instead of
'-oknodo'.
(From OE-Core rev: 40f65a76b3291ae625c072a8efebbf134b15c367)
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 3cc3a95b86cb367574f7754bed655f27045cf5a7)
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
License md5 was changed for src/gpgme.h.in:
"File: @configure_input@ */" was replaced by "Generated from gpgme.h.in for @GPGME_CONFIG_HOST@. */"
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: d495f45717ea9f7767a8a4a9b1f83c19d56e4dc9)
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Line "Copyright (c) 1999, 2005, 2006, Oracle and/or its affiliates. All rights reserved."
in COPYING was changed into "Copyright (c) 1999, 2005, 2006, 2013, Oracle and/or its affiliates. All rights reserved."
in 1.3.2
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-git is needed by buildhistory-diff, so add it to this
packagegroup allowing buildhistory-diff to be used within
build-appliance-image.
(From OE-Core rev: 1f2d0f898e11bbb935d885920a1518336e19c3e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-git is needed by buildhistory-diff and the OE layer index update
script, and on machines where buildtools-tarball is necessary given we
are providing python we must provide this module as well.
Fixes [YOCTO #4747].
(From OE-Core rev: d9bf76b4fafc0ddcb19bf393e5e22678e49367b3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used by buildhistory-diff and the OE layer index, and thus will
be useful in the context of the build appliance and buildtools-tarball.
(From OE-Core rev: 449ae5a70bc7d7d08f99de7d272b4cc3c83c3dcc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-git.
(From OE-Core rev: bcbb34c26a235a103b46aa5c8ae7b3896904a215)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-gitdb.
(From OE-Core rev: 37890014f406ca2ab24e0ec918af39613642afa0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-gitdb.
(From OE-Core rev: 31bc9fa8d53110a09ca048039d83213b34f4b7e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This check was actually removed a very long time ago in
6656381714, before we even changed the QA
checks to use names instead of numbers - the name was probably added
ERROR_QA mistakenly because it hadn't also been removed from the comment
listing the QA checks or the function that determined which ones were
errors.
(From OE-Core rev: ff65497cd9a96d5ab49b16ba1f7e30a216ff4a42)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
victor
Jackie Huang
Chen Qi
Cristiana Voicu
Saul Wold
Roy.Li
Paul Eggleton
Jonathan Liu
Tyler Hall
Riku Voipio
Jukka Rissanen
Khem Raj
Marc Ferland
Ross Burton
Ionut Radu