Applied some review edits from Paul to the section.
(Bitbake rev: 56321b18808f5ed932543d907b9ebcfbf4420233)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-wrote this section to use clearer more described examples.
(Bitbake rev: 6eea23c4783c591c2d2c7f0b2a98e7a0cc8aa3c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made a review edit here to the section per Paul Eggleton.
(Bitbake rev: 3b6ab095862367bc0101b995b002f62e7968ccf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some general improvements in the "Overview" and
"Basic Syntax" sections. Additionally, I added a blank
section for "Variable Flags" that will eventually hold general
information on this concept. Finally, come review edits to the
"Defining Pure Python Functions" section per Paul Eggleton.
(Bitbake rev: 665d655f436f1a353f5fe467c5d97588f7b121c5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed a general edit to this chapter. Some significant changes
include changing the chapter's title to "Overview" when it was titled
"BitBake User Manual", doing some consolidation of text to eliminate
a couple sections that described methods to obtain a copy of BitBake,
and various improvements as needed.
(Bitbake rev: f635c4b36af79b8572095083a392fb58c11198c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this section to the end of the Metadata chapter.
(Bitbake rev: b653c58284cafd0b79991520543ca6239705d36b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit c54e738e2b5dc0d8e6fd8e93b284ed96e7a83051 added in the idea of hard dependencies
such as the case a setscene has a hard dependency on pseudo-native and that
dependency wasn't available from sstate for some reason.
Unfortunately the implementation was a bit too enthusiastic, causing rebuilds
of things when it wasn't necessary. A test case was:
bitbake quilt-native
bitbake quilt-native -c clean
bitbake <some-image>
and then you'd watch quilt-native get rebuilt for no good reason.
The clue to the problem is in the for loop where it never depends on
the item being iterated over.
The fix is to include the exact list of hard dependencies rather than
guessing. With these changes, the use case above works, the one in
the original commit also works.
This patch also adds in or cleans up various pieces of logging to
allow issues like this to be more easily debugged in future.
(Bitbake rev: 81bd475585ff1b44b390036b1eca0feae7c149eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, the shell trap code was created in exec_func_shell(). Split
the function so that we can create the code separately.
Also, some whitespaces were automatically deleted by my editor. Since
this is not necessarily a bad thing, leave these changes too.
(Bitbake rev: c712e622d20c61a07c9c172b60e9dc6beae14197)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pre/postfuncs were not being added to checksums. This meant that when reconfiguration
occurred, tasks were not always being rerun when they should. This include
sstate functions as well as systemd's do_install function in the OE metadata.
With the addition of postfuncs, its possible a shell task can have a python
pre/postfunc so we have to guard against this when generating shell output
in emit_func.
(Bitbake rev: b84d010144de687667cf855ddcb41c9b863c236e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Shared work directories work by assuming bitbake will not run
more than one task with a specific stamp name. Recent runqueue optimisations
accidentally broke this meaning there could be races. This fixes the code.
(Bitbake rev: b1628b1a260ddf43fc9985535b1ddcfcebbb1e5b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 0546bc19557de9263b448ceb1707884543d2de56.
This change was not discussed with the copyright holders so the license
needs to remain at version 2.5.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we set:
BB_SIGNATURE_HANDLER = "noop"
Then we would get the following errors:
[snip]
File "runqueue.py", line 876, in RunQueue._start_worker(fakeroot=False, rqexec=None):
"fakerootnoenv" : self.rqdata.dataCache.fakerootnoenv,
> "hashes" : bb.parse.siggen.taskhash,
"hash_deps" : bb.parse.siggen.runtaskdeps,
AttributeError: 'SignatureGenerator' object has no attribute 'taskhash'
[snip]
This patch fixes the problem.
[YOCTO #5741]
(Bitbake rev: 2bfcb751891cf3b4050e996b3c8e28678c3a8bf4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob doesn't read these variable from file and bitbake doesn't use them,
so they shouldn't be set in conf file.
(Bitbake rev: a8c9df86b96e27dc49028c2da42034d13988960c)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If enable_proxy is not activated, Hob should not save the proxy values
in the conf file when user hits save button.
[ HOB #5308 ]
(Bitbake rev: fbe0851221ecfcefea5bdd4b629a05ed4f5ac189)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When Hob receives a bb.command.CommandFailed event, it should check if
it's a log kind of information.
"Forced shutdown" and "Stopped build" are messages that show when a build
is not complete, but Hob considered them error.
[HOB #5609]
(Bitbake rev: ea1939f7ec8d8a71ce16a60c251c2413d7d91eb3)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The busy cursor would never change after pressing Stop button.
It should be set after the possible return inside machine_combo_changed_cb()
method.
(Bitbake rev: d440d3ad4b2d99bc20e06d2d5f5e76d07864dff3)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It must be checked first if parser has the attribute 'shutdown' when
user hits Stop button and the forceshutdown state is given.
[HOB #5579]
(Bitbake rev: 46943b442ea4fa778f70590b6dcce483595efaf8)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a bb.command.CommandFailed event is received by Hob, the error
message is stored inside event.error.
This information tells exactly why bitbake failed, so Hob should display
it instead of the current composed message.
(Bitbake rev: 24543ff6b45771712d624541ae35738d7d98f33c)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently its near enough impossible to tell bitbake to run target X,
task Y and target A, task B. We could hack various parts of the API
around but it would mean incompatibilities.
An alternative is to accept the syntax "<target>:do_<task>" as a target
name. The default task would be used where the task is unspecified.
This has the advantage that its neat/clean code and works from all
current APIs including the commandline.
(Bitbake rev: 55f6bee3114e582333a1784caeddb197b9163d02)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure that these are lower-cased. Also, removed the tags
for cross-referencing into the term section of the YP Development
Manual.
(Bitbake rev: f9e3de2bb3e73204ef35d102ff26ee7393056ede)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrected grammar and applied active voice where possible.
Also removed several cross-reference tags to the YP manual set.
(Bitbake rev: 17cbad436c97e904a04596237022e84853b10a21)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented out two blocks of code that are responsible
for getting the book's title to format onto the title page.
Commenting the code out suppresses the title from the
PDF version's title page yet retains the title text for the
HTML tab space of the browser. The reason this is necessary
is because the BitBake User Manual uses an image file for
the title. Thus, it is not necessary to print the title
again.
(Bitbake rev: d7f15880c5423d91fd786e291f3e062545342184)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added five parameters here to match the build process used
for the YP manual set.
(Bitbake rev: f95994be26986098c2603ef6d4cb10f06422b790)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were two section tags that used the same id name "classes".
One was in the intro chapter and one was in the metadata chapter.
This was causing an exception in the PDF creation process and
breaking it. I renamed the tag in the metadata chapter
"metadata-classes".
(Bitbake rev: d5f405586f7c50c602241519d32d02b1c7b1f345)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a scrubbed copy of the YP ref-manual glossary. The content
was scrubbed to contain BB variables only. Removed broken
cross-references, made sure the PDF file built.
(Bitbake rev: aae6bcb7fb6e056eb7b1027a8054f6ea5f8ab2b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Richard Purdie
Laurentiu Palcu
Robert Yang
Irina Patru