* Remove backport patch filemode-fix.patch.
* Update --with-kernel=${STAGING_DIR_HOST}/${prefix} to find kernel
headers (linux/*.h) to fix the error:
| checking kernel supports perf_events... unknown -- perf_event.h not found
| ERROR: You requested to build oprofile with '--with-kernel=/buildarea/lyang1/test_f2/tmp/work-shared/qemux86/kernel-source',
| but headers were not accessible at the given location.
| Be sure you have run the following command from within your kernel source tree:
| make headers_install INSTALL_HDR_PATH=<kernel-hdrs-install-dir>
| Then pass <kernel-hdrs-install-dir> to oprofile's '--with-kernel' configure option.
| configure: error: Unable to build oprofile. Exiting.
(From OE-Core rev: b2200152deef0aec3cd8fe55bb73d6e8fccfe159)
(From OE-Core rev: 2dff13e834dc7b67e16ee597d7f9a3efdc72d10f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: c731ecab0a6cb31198ec8270dc9381b14964dd3c)
(From OE-Core rev: c45ded0d0cf4be56c124f288706caad89163aa68)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 78b159bf753c43c78bb0f283add7d447b96e08f1)
(From OE-Core rev: 1054d5c0c0353b2ae89ab70232055eec759ccd43)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemd serial-getty is failing because dev-tty ends with timeout, systemd
uses a default timeout of 90 secs that it's reached on AB's production environment
due to high I/O loads (nfs).
When use QEMU is used without KVM support, the machine code is executed by TCG
(software code execution) that is dependent on devices layer and causes locks
between TCG/Devices increasing the machine code execution time [1].
QEMU don't support configuration of device timeout always uses a default one that is
90 secs, so the next patch increases the device timeout to 240 secs [2] in order give
enough time to get devices ready. It ONLY applies on QEMU machines.
[YOCTO #8141]
[1] http://blog.vmsplice.net/2011/03/qemu-internals-overall-architecture-and.html
[2] https://bugzilla.yoctoproject.org/show_bug.cgi?id=8141#c10
(From OE-Core rev: 5196d7bacaef1076c361adaa2867be31759c1b52)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exclude all versions of gcc-source from world builds so that:
bitbake -c <stage> world
will work. gcc-source deletes most bitbake build stages
since it is a source-only package.
(From OE-Core rev: 0eda7b4d889b926ab97d60fcbb1c0d12d730f8ea)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase sparse image block size when ROOTFS_SIZE is smaller than
the minimum needed for ext4 to fit into it.
[YOCTO #7664]
(From OE-Core rev: 6938791ff97a23430afb4aa16d71aa8729a12ead)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few short fixes to splitting/iteration done over package lists
in license.bbclass, package_manager.py and rootfs.py.
[YOCTO #7664]
(From OE-Core rev: a902e98c5938f52ec960e0518e0ceaf8f5ee610c)
Signed-off-by: Alex Franco <alejandro.franco@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace the previous shell magic with a Python function to parse the readelf
output, and fix the package names to include the lib32- prefix.
[ YOCTO #8219 ]
(From OE-Core rev: c51d24710b48eb3930edb8c661100705c6203e78)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the qemu for aarch64 must use a virtual console for the second
serial port rather than emulating actual hardware, make sure the correct
device is specified so that a tty is actually started.
(From OE-Core rev: 5b720a69f0d181ab2de6032a6e3f5a0ee4a14302)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On qemuarm64 the second serial port in SERIAL_CONSOLES will be hvc0.
Since that doesn't have tty in the name, a correct label didn't get
added to inittab.
This change makes both names with tty and without work.
(From OE-Core rev: 4cca92b34defae425929d92671edde621f8a5e80)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bind doesn't ship shared libraries only static libraries, so the default
dependency on PN from PN-dev is pointless and means that an image with bind-dev
installed (via dhcp-dev's automatic dependency) ends up with named installed and
started on boot which is rarely intended.
If and when we ship bind's shared libraries we should ensure that the libraries
go into a separate package.
Also remove an old comment about --enable-exportlib which isn't supported by
configure anymore.
[ YOCTO #8216 ]
(From OE-Core rev: f28757a4b89447ea528cba987f0396b92aa0bbfe)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
EAGAIN/EWOULDBLOCK can be followed by no data. So don't tight loop
waiting for data.
(From OE-Core rev: 3aad1f489f38e999914ee6ccbf87367b9a75ee5e)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes the ability to correctly identify syslog's package
name for the built image. It is derived from modifying oeqa/oetest.py
for [YOCTO #8170]
(From OE-Core rev: 74d02c942414a193a01367c0a32bf91a3329a8d4)
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified hasPackage() to split the content of pacakage manifest file
in containing lines and search at the begining of each line the
existance of the needed pkg.
[YOCTO #8170]
(From OE-Core rev: f07045fcae859c902434062d1725f1348f42d1dd)
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On a nonblocking socket an exception can be generated for the EAGAIN
and EWOULDBLOCK errnos. Since these aren't actually errors make sure to
retry rather than bailing out.
(From OE-Core rev: 2f5cbfee0ab1189fbb83f0e785d79c8d123fccc2)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New webkit requires at least version 0.7
(From OE-Core rev: f59c875fea839052b5bdd950cb74e0c60a0ba946)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this change on a test failure an exception would be generated due
to runqemu being killed before the logging thread which was on the other
end of the socket.
The exception was actually correct saying there was no data on a socket
marked readable, but this was because the qemu process was killed before
the listener thread.
(From OE-Core rev: 6497fddf7f6c4a59e16dab4a9daeb3614a61a8dc)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means we can use this as a test to enable certain autobuilder tests
such as testsdk.
(From OE-Core rev: dbfb2efcd7240a0a6a413f1b37c399b66fa79ca9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The option was added so that the qemurunner could start a second tcp
serial port without adding machine conditional logic to qemurunner.
The issue that made this necessary was that when "virt" is passed to
qemu-system-aarch64, the normal mechanism for specifying a tcp serial
port does not work. This is because the hardware for the "virt" machine
is hardcoded in the device tree blob and the addition devices must be
virtio devices.
So runqemu can specify virtio for qemuarm64 whereas it seems all other
qemu machines work with the "-serial tcp*" option.
(From OE-Core rev: 849d65d55e4df5fa443b2cb7b4cee23913fc9d5a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu can freeze and stop responding if the socket buffer connected to a tcp
serial connection fills up. This happens of course when the reader of
the serial data doesn't actually read it.
This happened in the qemurunner code, because after checking for the
"login:" sentinel, data was never again read from the serial connection.
This patch solves the potential freeze by adding a thread to continuously
read the data from the console and log it. So it also will give a full log
of the console, rather than just up to the login prompt.
To simplify this patch, another serial port was also added to use for the
sole purpose of watching for the sentinel as well as being the interactive
serial port. This will also prevent the possibility of lots of debug
data on the console preventing the sentinel value from being seen due to
interleaved text.
(From OE-Core rev: 2da3fee6b6d9f4dd4c4cb529f4ba393c20aa0f13)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that create_socket() can be called more than once to create sockets,
it now returns the socket and port rather than setting class variables
directly.
create_socket() now only uses exceptions for errors, not the return
value from the function.
(From OE-Core rev: b46d83a848cf23c7f639a6ebafbd0f2c1413584a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bootlog and qemusock variables were set in the class as part of the
create_socket() routine. However those variables are never used outside
of the same function and thus serve no purpose as class variables.
This initializes those variables near where they are used.
(From OE-Core rev: 829a6e521f15bae93d5f1a02dc67bc56a8c606c8)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pull package from meta-oe to oe-core:
meta-oe commit: bce4dba5546480c8e43c6442959ac7d0a4ef32f6
The libcap-ng library is intended to make programming with posix
capabilities much easier than the traditional libcap library.
It's not a replacement to libcap, it provides different library
(libcap-ng.so) while packages explicitly look for libcap.so. It
could be used by qemu, util-linux, libvirt, audit ...
With adding it to oe-core, the copies from following layers could
be removed:
* meta-oe, meta-selinux, meta-security-framework ...
(From OE-Core rev: ad509d7644803ff9386affefe2ec1a3664027074)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ackage from meta-oe to oe-core:
meta-oe commit: 9cc54e10efa5ca70d9980f833a8e5a310e5ad21d
It's required for libcap-ng to build python bindings.
With adding it to oe-core, the copies from following layers could
be removed:
* meta-oe, meta-selinux, meta-intel-iot-middleware ...
(From OE-Core rev: 66923c6776da13bd4513a73c3f7c5e60d74eb0f3)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
XvMC extends the X Video extension (Xv) and enables hardware rendered
motion compensation support. In a test build enabling this feature
increased the size of the xf86-video-intel package from 1386841 to
1847154 bytes.
When we enable the xvmc feature in xf86-video-intel we see the
following QA issue reported:
QA Issue: xf86-video-intel rdepends on xcb-util, but it isn't
a build dependency?
We fix this by ensuring the build dependencies are set correctly when
the xvmc feature is enabled.
(From OE-Core rev: 9f625c2e6cc5c42d047ad33d5354522c18f2d6b7)
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rpm process replace all the "%name" in the spec file by the name of
the package. So, if the package is composed of some files or directories
named "%name...", the rpm package process failed.
Replace all "%" present in files or directories names by "%%%%%%%%" to
correctly escape "%" due to the number of times that % is treated as an
escape character. Jeff Johnson says this is the Right Thing To Do.
[ YOCTO #5397 ]
(From OE-Core rev: 5ed1c7f556df3fafd45d493010cc0bbe74d05ebd)
Signed-off-by: Sébastien Mennetrier <smennetrier@voxtok.com>
Signed-off-by: Michaël Burtin <mburtin@voxtok.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having disabled phonon by default in Qt4 we need to ensure this
packagegroup is still buildable when it's not available.
(From OE-Core rev: 9f1ce43fa1bdd3952ccf510cb648ebe9e0e8aac2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'd somehow missed the existence of fail() when I wrote these. It's
preferable here so you don't get the somewhat useless "false is not
true" message in the case of failure.
(From OE-Core rev: 173a5896fff57136e1f15e15f90961416aadde94)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nativesdk has been a prefix rather than a suffix for some time now.
(From OE-Core rev: 940b9d1736dbe63f80b9d46b2b9b1cea77ed35f1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
4.01 -> 4.02
(From OE-Core rev: b396c98e4379ef080ad7e90efe0d5fb21a3b046c)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nobody sets this. The orc packageconfig already does everything we need.
(From OE-Core rev: acf49ddce2234da3cc1c81e29ca675010ba7814b)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, gstreamer configure scripts may choose the host orcc instead
(From OE-Core rev: c5b772e2be10cca196a7a63f0176ce3e38311d02)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
iso-codes is a dependency of epiphany
(From OE-Core rev: c63aa9839cc3f0cf5cad5042865c4ed97facda4b)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise QA check will fail.
Some schemas in gsettings-desktop-schemas (such as proxy and locale)
are still using deprecated paths, as of 3.16.1. This causes warning
messages, and meta/lib/oe/rootfs.py complaints about them.
(From OE-Core rev: 751c8388c7f7584460bbf0c0f1d61e47372717af)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake expects target architecture strings in the format of uname(2),
which do not always match TARGET_ARCH (e.g. powerpc vs ppc).
(From OE-Core rev: 7c61d022aa9bbba3c2f8a2df46eeb19e2772c89a)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required to build latest webkitgtk
(From OE-Core rev: 3a7d80e50a6683339a8940e12a3c10efd2586518)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream, xz has been the only format for some time now, so let's
make it the default and adjust recipes that package old stuff.
(From OE-Core rev: 0f9ea90dde8f63aace19531e066580e41bf3d7cc)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
finitel is not implemented in uclibc and since its not posix, it wont be
implemented in future too.
Fixes perl 5.22 build error
perl/5.22.0-r0/perl-5.22.0/sv.c:12135: undefined reference to `finitel'
| collect2: error: ld returned 1 exit status
(From OE-Core rev: 4c76dd4ee10e3be147951824a4c082f271f90e62)
Signed-off-by: Yen-Chin Lee <coldnew.tw@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We redefine LD to point to ld.bfd when building kernel, which works in
most cases since kbuild system calls out for bare LD most of the time,
however some of newer kernels e.g. 4.1+ have some code added which can
call gcc directly to do the linking job e.g. arm vdso code
This causes build failures when we have configured the default cross
toolchain to use gold linker as default. Errors like
BFD: arch/arm/vdso/vdso.so: Not enough room for program headers, try
linking with -N
| arm-angstrom-linux-gnueabi-objcopy:arch/arm/vdso/vdso.so[.hash]: Bad
value
start happening.
With this patch we force gcc to choose bfd linker as well
(From OE-Core rev: 5724e4d245f142ac6fb1ea211503fd220683354d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include a workaround patch suggested by upstream when using
kernel 4.1.x.
(From OE-Core rev: 28f261cd7da53124a5aeb71e1f473cd473a33489)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new wic testcase, for testing the creation of the hybrid iso
image with isoimage-isohybrid plugin.
(From OE-Core rev: de3de340ba9c86c297bcb9fc1b1022dd05a195e7)
Signed-off-by: Mihaly Varga <mihaly.varga@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a parameter VERSION in workdir Makefile which tells the version
number of parted. While running ptest for parted we are getting failure because
of VERSION mismatch
--snip--
root@qemux86:/usr/lib/parted/ptest# ./run-ptest
make: Entering directory '/usr/lib/parted/ptest/tests'
make[1]: Entering directory '/usr/lib/parted/ptest/tests'
help-version.sh: failed test: --version-$VERSION mismatch
FAIL: help-version.sh
--CUT--
[YOCTO #8172]
(From OE-Core rev: 6d380d9d2e7f4a2e8c30da5c79086ee0391bfad5)
Signed-off-by: Ajay M <ajay.gju@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might be unexpected errors when use host's rpcgen.
[YOCTO #8181]
(From OE-Core rev: 7daac5798ac9e64efe00d8fca3adc463858a185d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ptests were failing and many more were being silently skipped because
required binaries were not being built.
Build the binaries in regress/ and set SUDO environment variable in
run-ptests: after this all tests in regress/ are now run. Continue to
skip building binaries in regress/unittests/: unittest runtime is
excessive.
On a NUC running intel-corei7-64 core-image-sato, new results are:
PASS: 55, SKIP: 3, FAIL: 0
[YOCTO #8153]
(From OE-Core rev: 1f7aaf76f4aa7875f05f4b838a5ec4594a4c35dc)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to inherit gnome as it pulls in spurious dependencies for a
non-graphical library, so just inherit gnomebase.
Also remove the --disable-introspection option as gnomebase already does that.
(From OE-Core rev: 14052535a8d5f137e22439f33aad73bc4b777d58)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gnome class is really a convenience class to include other classes, so move
the introspection arguments into gnomebase.bbclass.
(From OE-Core rev: ad7073194546c16a5612924eb59152b35de6f340)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a multilib package depends on an allarch recipe that installs an
architecture-independent .pc file it will not be able to find the .pc file as
the recipe gets installed into the MACHINE sysroot but pkg-config looks in the
MLPREFIX-prefixed sysroot.
Solve this by extending PKG_CONFIG_PATH in multilib environments to include the
architecture-independent path in the MACHINE sysroot
(sysroots/MACHINE/usr/share/pkgconfig/).
(From OE-Core rev: 6a6dd4eb53dbf8a0c31ac2d68af5befebe727596)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Often configure scripts or Makefiles that use the stub scripts written by
binconfig-disabled fail mysteriously with no obvious problem. Attempt to solve
this by writing an error to stderr which hopefully makes it to the logs.
[ YOCTO #8169 ]
(From OE-Core rev: c38acd720b3f6ffbeb544063692eb471dada8593)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use '.' instead of 'source' so this works with dash as /bin/sh.
(From OE-Core rev: 4114c904f173721c682f9ed1a593c77307ef9d35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* INSANE_SKIP_${PN}_append_aarch64 is causing following warning in some
setups:
WARNING: Variable key INSANE_SKIP_${PN} () replaces original key INSANE_SKIP_glibc ().
* in worst case this will be applied also for glibc-initial package
which is using the same glibc-package.inc, but glibc-initial doesn't
create any packages so we should be fine
* someone building for aarch64 should confirm verify that this
INSANE_SKIP is still needed and cannot be fixed properly it was
introduced in:
commit aeb6f53dd607ceb0d2265a05c27f751109c73752
Author: Mark Hatle <mark.hatle@windriver.com>
Date: Thu Dec 18 16:51:13 2014 +0800
glibc-package: aarch64 enable symlink for ABI compliance
aarch64 requires the ld.so to be present in /lib, even if the rest
of the libraries are installed into an alternative directory.
See: https://sourceware.org/glibc/wiki/ABIList
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 34ffa04a5030d23070aa4d389d1cc51438525670)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the command is "rpm -V" and the return value of (headerIsEntry(h, RPMTAG_VERIFYSCRIPT)
|| headerIsEntry(h, RPMTAG_SANITYCHECK)) located in /lib/verify.c is true, it will call
rpmpsmStage function(rpmVerifyScript->rpmpsmScriptStage->rpmpsmStage) and occur segment
fault because of null point(rpmtsGetRdb(ts) == NULL and rpmtsGetRdb(ts)->db_txn).
So we open rpmdb to avoid bad input when find headerIsEntry true.
workflow:
main()->rpmcliVerify()->rpmcliArgIter()->rpmQueryVerify()->rpmgiShowMatches()->showVerifyPackage()->
rpmqv.c verify.c query.c query.c verify.c(headerIsEntry)
rpmVerifyScript()->rpmpsmScriptStage()->rpmpsmStage()-> rpmtxnCommit(rpmtsGetRdb(ts)->db_txn);
verify.c psm.c psm.c psm.c
(From OE-Core rev: 91945b7fcb0c83ca72543e5327e965eca9c269c4)
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An additional use case of UBOOT_CONFIG is when a machine has applicability
to boards of the same architecture but different in other ways
to require a different UBOOT_BINARY build.
The UBOOT_CONFIG default value can be a list of these board types.
For example:
UBOOT_CONFIG ??= "boardA boardB"
UBOOT_CONFIG[boardA] = "boardA_defconfig"
UBOOT_CONFIG[boardB] = "boardB_defconfig"
Change do_install and do_deploy sections which process a UBOOT_CONFIG list
to create short symbolic links to each of the config types for UBOOT_BINARY.
This is similar to the links currently being created for
SPL_BINARY when it is defined with a UBOOT_CONFIG list.
For the above example, and UBOOT_BINARY as u-boot.bin,
the additional symbolic links created in the DEPLOYDIR would be
u-boot.bin-boardA
u-boot.bin-boardB
(From OE-Core rev: 12551f4ca214cfc2528b42da8574a6622228ce0b)
Signed-off-by: Lee Nipper <lee.nipper@linux.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove qemuwrapper-cross from RDEPENDS, install a cross pkg in sysroots
isn't useful, if we really need run qemuwrapper in SDK, we should add it
as nativesdk, and it has multilib conflicts when populate_ sdk:
error: file /usr/bin/crossscripts/qemuwrapper from install of
qemuwrapper-cross-1.0-r0.lib32_x86 conflicts with file from package
qemuwrapper-cross-1.0-r0.core2_64
[YOCTO #8089]
(From OE-Core rev: 4b779616ed3fe96519fa3be9c32aad1bb0f1ea3f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a clear look when input.
[YOCTO #8089]
(From OE-Core rev: 973a169a35caa4e603fe5abf9ad661f5206a7f07)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This add MIPS octeon3 support to binutils.
(From OE-Core rev: a3d3dc83a1ef73162f548594241c587ad12d8226)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let's have the caller do this and then the function is a bit more
flexible (e.g. we can choose to parse with bbappends or not); fix up
calls to this function appropriately (of which there are only two, both
within devtool).
(From OE-Core rev: 6ba969f1ac5a1a0e277a21287fc5ae1622a6b14e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe is BBCLASSEXTENDed (e.g. to -native), its PN value and the
name of the bbappend will be different; we were assuming them to be the
same when reading in the workspace, leading to us seeing the base recipe
name everywhere afterwards.
Also add a test so we ensure this doesn't regress in future.
Fixes [YOCTO #8157].
(From OE-Core rev: b63fca00c2e24ad0c8b8b3c492d93ee4372fa92d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow UTF-8 characters on control files. Also handle an expection
in case of invalid characters (non UTF-8).
[YOCTO #6693]
(From OE-Core rev: 4096f3c5d309161999adc996fdfa7526e5504366)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit changes the both CFLAGS and CXXFLAGS when building the
valgrind ptest binaries by appending -O0, forcing no optimizations
instead of the default -O2. For qemux86-64, this change results in
FAIL/PASS ratio improvements from 149/394 to 58/485.
It is evident that the expected result files were generated from
regression tests binaries built without optimizations.
[ YOCTO #8063 ]
(From OE-Core rev: 98c4a3ffb8dca10739be600e8d6df7fb6aa4958f)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
7.0p1 includes the fix for CVE-2015-5600, and release note is in:
http://www.openssh.com/txt/release-7.0
(From OE-Core rev: a98f4aedb241aa4352e644b5ef7c275f467c0c48)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pixops: Be more careful about integer overflow
Integer overflow in the make_filter_table function in pixops/pixops.c
in gdk-pixbuf before 2.31.5, as used in Mozilla Firefox before 40.0 and
Firefox ESR 38.x before 38.2 on Linux, Google Chrome on Linux, and other
products, allows remote attackers to execute arbitrary code or cause a
denial of service (heap-based buffer overflow and application crash) via
crafted bitmap dimensions that are mishandled during scaling.
(From OE-Core rev: e27f367d08becce9486f2890cb7382f3c8448246)
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In recipes that are exempt from source code archiving due to
COPYLEFT_LICENSE_EXCLUDE, do_deploy_archives does not have a transitive
dependency on do_unpack. Given enough parallelism, this means
do_deploy_archives can run at the same time or before do_unpack.
Because do_deploy_archives did not specify a working directory, its
working directory was ${B}, which defaults to ${S}, which may be set by
a recipe to a directory that is created by do_unpack.
In this case, do_deploy_archives can fail because do_unpack deletes and
re-creates the directory and do_deploy_archives cannot change into the
non-existent directory. Avoid this problem by explicitly specifying
a working directory for do_deploy_archives (and for
do_deploy_all_archives as well for good measure).
(From OE-Core rev: e22685ff11af6d54c939aa8f327a0aaa1557fbbc)
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems all other architectures provide their own definitions for these
functions like __ACC_UA_GET_LE16 and this code is exposed only on ppc
this is the typical extern inline ( gnu definition ) version c99
semantics, lets use static inline which works both ways
(From OE-Core rev: 73bcb12743537e8b0e047b0783dc8f5bb2f62db6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just when building on host which doesnt have libunistring on host guile
fails the following configure test
| configure: error: GNU libunistring is required, please install it.
| Configure failed. The contents of all config.log files follows to aid
debugging
The reason is that its looking for libunistring dev files on build
system, so lets point the configure into target sysroot, similar issue
exist for libgmp, libltdl detection as well, fixed thusly
Get rid of trailing whitespaces while here
(From OE-Core rev: 9770ce87e1e09096bbfab19e646e2b8612efae8a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glibc has recently turned on Werror globally which is good but then not
all option combos are well tested so there still remains cleanup needed
when not using -O2, so lets just disable Werror in such cases, until
fixed upstream
Change-Id: I2d491c360a15b0752c97ff77ee0faaeede6e8d2a
(From OE-Core rev: 52a90e8e592ddd228939e15d7fd0d69f3c1e816f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usually, the host's tar command is sufficient. However, special cases
like archiving xattrs depend on a modern GNU tar version. The new
IMAGE_CMD_TAR makes that possible, with xattrs given as example.
(From OE-Core rev: d8db122114f4d0600b662f79b3673108b4b6c0b7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building tar-replacement-native as replacement of the host's tar in
the standard path was meant to be done manually by a user in
preparation for the regular bitbake run. Such a usage has been
superseeded by installing the pre-compiled buildutils and might have
been broken on hosts which need it by the sanity check for tar >=
1.26.
Therefore tar-replacement-native_1.28.bb can be removed in favor of
adapting the normal tar recipe such that it installs an opt-in binary
under a different path.
The special do_install logic is explicitly limited to class-target,
instead of making it the default and disabling it (which would be the
case for class-native and class-nativesdk).
(From OE-Core rev: e6fee3ddb5600fc564243a96d6232b4ae097df32)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All CVE patches removed, included in release.
(From OE-Core rev: 3b57ca0ad44e66a1ecd39c410f63d99705c56b1e)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently adt-installer uses "${TMPDIR}/deploy/sdk/" as a deployment dir.
This doesn't interact well with DEPLOY_DIR reassignment. So let's use
"${DEPLOY_DIR}/sdk/" instead.
(From OE-Core rev: 059db140885bad379534e6ec713f3ceb4e18faea)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xattrs may be needed by some distros. Support that by compiling in the
necessary code, even if it is not used by default. Then .jffs2 images
including xattrs can be created with:
EXTRA_IMAGECMD_jffs2_append = " --with-xattr"
(From OE-Core rev: 24fde4d983cc8f056177de6c1ad308369f6279ad)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, drop puzzles_x32_abi_time.patch as it has been merged upstream
(From OE-Core rev: e95e6b0bdfe1bc9b71af82e3be260300232bb77e)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
quilt ptest requires getopt and perl-module-overloading.
[YOCTO #8062]
(From OE-Core rev: 9dce5c79354359c0c7c513b6650891a6efce0e66)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bump to version 7.44
(From OE-Core rev: edea6df23692686c8401dea877234072ee117b36)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a patch which updated add LDFLAGS variable to SLDFLAGS
in Makefile.
(From OE-Core rev: 6bf2743a967ede08d19f9ca1f72e36e806e92fb0)
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* License is now GPLv3+
* Remove patches that are already in upstream or not applicable
anymore
* Add a patchset to enable cross-compiling 4.3.1 (modified from
http://savannah.gnu.org/bugs/?43223)
(From OE-Core rev: c356d1ab0a807d9c2988b93d706a593fa3bc0fa5)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libmvec is new library in glibc 2.22 and currently turned on by default
on x86_64. this helps in packaging it properly when its generated
Fixes warning like
WARNING: QA Issue: nativesdk-glibc: Files/directories were installed but
not shipped in any package:
/usr/local/oecore-x86_64/sysroots/x86_64-angstromsdk-linux/lib/libmvec-2.21.90.so
Please set FILES such that these items are packaged. Alternatively if
they are unneeded, avoid installing them or delete them within
do_install. [installed-vs-shipped]
(From OE-Core rev: f009e592fd5ef65c2417ec8cc131056a575a003f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- git'ify the OE patches
- add_resource_h_to_wait_h.patch - dropped, we do not support that old
perf anymore
- mips-rld-map-check.patch - Dropped because binutils is fixed for it
see https://sourceware.org/ml/binutils/2011-12/msg00112.html
- initgroups_keys.patch - Folded into
0026-eglibc-Forward-port-eglibc-options-groups-support.patch
Change-Id: Ib8e731b212f52b8ff12e2180babbc19970fb1ef1
(From OE-Core rev: 6ea08396dbb628140fd3289fc9fb19df97914326)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
6.9p1 is primarily a bugfix release.
(From OE-Core rev: b971bdb52ab709b60b42be56b5175f43c96304b1)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This basically means replacing a "-14" Debian patch with "-15" patch.
(From OE-Core rev: cc636032617964818211ccb47a9fb6d6163af8c0)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means replacing a "-6.1" Debian patch with "-7" patch.
(From OE-Core rev: 5c3682136358272a3a83300a865ff9b551b31834)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes due to IMAGES_FSTYPES "vmdk" and "vdi" now defaulting to ext4.
Switching Build Appliance to Ext4 will bring it more in-line with other BSPs.
[YOCTO #8096]
(From OE-Core rev: 0c747865f761d825c8a9b826d843573e5aac3ca5)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following IMAGES_FSTYPES defaulted to ext3:
"vmdk", "vdi", "qcow2", "live", "iso", "hddimg"
This patch changes the default for those IMAGES_FSTYPES to
ext4 in order to bring the images more in line with other BSPs.
Besides improvements in performance and reliability ext4 provides
additional functionality as well (option to turn off the journaling,
dynamic resizing of VDI volumes etc.).
(From OE-Core rev: 2b56d671d2f0ef22786c97e29e1215eb80c94490)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows to write the dump files immediately
after get the data from the target. Before this,
it would run all the commands and write the files.
The old behavior could cause no log written at all
if the serial console gets stuck.
(From OE-Core rev: 73c98d38e94d3b1407620c134f3b00dcd9d6132c)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tearDown method is triggered when a tests ends
it doesn't matter if fails or succeeds. Inside this
method added an evalution to check if fails and then
run some commands in the target to get the data for
later debugging.
[YOCTO #8118]
(From OE-Core rev: 8bbfef69828d9b053e2a33dfa9d8318d9572cf6b)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allow to search for the prompt after a command is
run so it can avoid waiting for the timeout.
Also corrected identation issues
[YOCTO #8118]
(From OE-Core rev: 600f35c0873a61f8cd02c0e5cc1495ce7785ea89)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Raw mode allows to send the command without sending
'echo $?' for validation; Also this doesn't remove the
command or the prompt from the output returned. In raw
mode validation is done if there is output.
This raw mode would be useful for validate the prompt
when a user logs in.
[YOCTO #8118]
(From OE-Core rev: b8ead7c0929c4096e50b481a608f5d0c09eab29d)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the automatic login after the target
finished booting. If the automatic login fails
it won't stop the target or any test, it would
only send a log to the file.
[YOCTO #8118]
(From OE-Core rev: cc2b1c28801399c6b525248fa0dabf7c42afc714)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only need for the console before this patch was
to check if the target has booted. This allows to send
commands to the terminal.
This new method is based on the method with the same name
of the QemuTinyRunner class. The difference here is it will
remove the command and the prompt. The other diference is
it will send an echo $? to check if the last command was
successful.
[YOCTO #8118]
(From OE-Core rev: a82711fe4520538a732a16795d50573b6f1d4463)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sbsigntool depends on gnu-efi and we need sbsigntool-native to do some signing, so extend gnu-efi to support that.
(From OE-Core rev: d055e797eb1d60f04d685b6583eb1695c7600a56)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We are expecting some random failures in QEMU runs one of this is
related to qemu_cpu_kick_thread that ends on exit(1) on qemu.
To improve debug information add patch that prints the backtrace and
the status of qemu cpu.
[YOCTO #8143]
(From OE-Core rev: c9dd8fae8fd799f0f64328606904e047ed8ee9c3)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If srcdir is not set, we get below error while running ptest for bash
on qemu target,
-- snip --
root@qemux86:/usr/lib/bash/ptest# ./run-ptest
/bin/sh: line 0: cd: /home/ajay/Downloads/poky-fido-13.0.0/build/tmp/work/i586-poky-linux/bash/4.3-r1/bash-4.3/tests: No such file or directory
Makefile:879: recipe for target 'runtest' failed
make: *** [runtest] Error 1
root@qemux86:/usr/lib/bash/ptest# vi run-ptest
root@qemux86:/usr/lib/bash/ptest#
-- CUT --
So, set srcdir to current directory, where tests binaries exist.
[YOCTO #8145]
(From OE-Core rev: 00d94314679eb4345b5012389aa6252abe871a76)
Signed-off-by: Ajay M <ajay.gju@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream has moved git hosts, so update the SRC_URI appropriately.
[ YOCTO #8181 ]
(From OE-Core rev: c6166b7ff7ebcab424af975b1e5378813c684560)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase gtk-option.patch
(From OE-Core rev: 54fc08789321168026d4138fb6292cb6657e7ee5)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a bug fix release.
(From OE-Core rev: 9d8062a0953f03089f751af435c18f5174e1ce67)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mc depends on util-linux that uses libmount for mount filesystems.
(From OE-Core rev: c158cdd33f79f13b5e3fc03f5b8ad495003bc525)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix_symlink will be called many times, like populate_sysroot and populate_lic;
which maybe lead to rpm-native building failure, due to the below error:
".../usr/lib/libacl.so: No such file or directory"
since after acl/attr finished populate_sysroot task, rpm start to be compiled
but acl/attr populate_lic, which run fix_symlink, maybe remove the
.../usr/lib/libacl.so
In fact, fix_symlink only needs to be called after populate_sysroot
(From OE-Core rev: 6882b65489c74907709021532578270e8f7f03f0)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes affecting future time stamps
North Korea switches to +0830 on 2015-08-15. (Thanks to Steffen Thorsen.)
The abbreviation remains "KST". (Thanks to Robert Elz.)
Uruguay no longer observes DST. (Thanks to Steffen Thorsen
and Pablo Camargo.)
Changes affecting past and future time stamps
Moldova starts and ends DST at 00:00 UTC, not at 01:00 UTC.
(Thanks to Roman Tudos.)
(From OE-Core rev: 4e0fb630d3bb0250ece6e2071ae49b2601ae3e57)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes affecting code
zdump and zic no longer warn about valid time zone abbreviations
like '-05'.
Some Visual Studio 2013 warnings have been suppressed.
(Thanks to Kees Dekker.)
'date' no longer sets the time of day and its -a, -d, -n and -t
options have been removed. Long obsolescent, the implementation
of these features had porting problems. Builders no longer need
to configure HAVE_ADJTIME, HAVE_SETTIMEOFDAY, or HAVE_UTMPX_H.
(Thanks to Kees Dekker for pointing out the problem.)
Changes affecting documentation
The Theory file mentions naming issues earlier, as these seem to be
poorly publicized (thanks to Gilmore Davidson for reporting the problem).
tz-link.htm mentions Time Zone Database Parser (thanks to Howard Hinnant).
Mention that Herbert Samuel introduced the term "Summer Time".
(From OE-Core rev: cbe4f950d775f17434ed4416b43b69a1c70feb2b)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building uImage fails when KEEPUIMAGE is not "yes".
Remove wrong removal of linux.bin before compressing it.
(From OE-Core rev: ed5c6a0c80bac092e98f4d68dbc9cad77701bc7e)
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The insert_feed_uris() method of OpkgPM was creating an initial
entry in the feeds list which pointed to the root of the ipk
directory, however the on-device package manager can't consume
this feed resulting in runtime errors - therefore we remove the
code to generate that initial feed uri.
(From OE-Core rev: 18e5dcfc610a255e490e4425f11213b8e14c6e00)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include by default all the files needed to perform checkpkg task.
These files are copied from meta-yocto because they refers recipes in
oe-core, the only missing file are maintainers.inc because it needs
consensus between OE-Core and Yocto project to define a common set of
maintainers.
[YOCTO #7895]
(From OE-Core rev: 973f898e15cf6d1b6715d08da9dc740ee040e0dc)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recent commit fixed perf build failures with a change that duplicates
a fix that can be found in kernels after 4.1. Unfortunately there is a
conflict between these two fixes and we see perf build failures when
building perf in kernels that contain the fix already. The problem is
that the fix from the recipe modifies the location of .config-detected
to $(OUTPUT).config-detected. In a 4.2 kernel the location will be
changed to $(OUTPUT)$(OUTPUT).config-detected.
We change the recipe to require a space in the pattern to only change
kernel sources that do not already place file in $(OUTPUT).
The recent commit that introduced the build failure is:
commit ea9016b60b47138bc58d84a06954b44527b20a19
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Sat Jul 25 14:37:58 2015 +0100
perf: Fix config file conflict with 4.1 kernels
If you setup mutlitlibs and then:
bitbake perf libb32-perf
bitbake perf libb32-perf -c cleansstate
bitbake perf libb32-perf
you will see races where the two builds get confused about which directory
they should be using and they corrupt each other.
The issue is that .config-detected is created in ${S}, not $(OUTPUT).
We can fix this by moving the file to $(OUTPUT).
[YCOTO #8043]
(From OE-Core rev: 00608cffffb586e8d2a2075117e710113c471448)
(From OE-Core rev: 57df1ebd910e42af47a0039830a60f41a3bd29b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit in the kernel source that fixes the problem from kernel side is:
commit 642273795fa81da11290ffa90bce6ff242f2a7bb
Author: Aaro Koskinen <aaro.koskinen@nokia.com>
Date: Wed Jul 1 14:54:42 2015 +0300
perf tools: Create config.detected into OUTPUT directory
Create config.detected into OUTPUT directory instead of source
directory.
This fixes parallel builds that share the same source directory.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1435751683-18500-1-git-send-email-aaro.koskinen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
(From OE-Core rev: cb8d309ff0ea0ca11edc2aae75ddd869491cb330)
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This deletes and therefore breaks PACKAGECONFIG[doc], so revert.
This reverts commit b741780d43.
(From OE-Core rev: 45cff248f5f9f4fb2498c34963e6652cc1166737)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GitHub is where upstream development is happening, so we are more likely
to find out about new releases from there
(From OE-Core rev: 029cf9c83c91b8430375bec1bb241430174bd5d8)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Google Code is shutting down soon and distcc has moved to github.
(From OE-Core rev: 1f8587b4ee70d452166548fbb513d7d4e097a455)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous upstream is no longer available. Debian git repository
is one commit behind the original repository, so that commit is added
as a patch.
(From OE-Core rev: e7601797f2dee95f6658962f9aae4d9fb8d0689d)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, drop guile.patch, because the same problem has been fixed
differently in the new upstream release.
(From OE-Core rev: 02e187e1f9fb79e4496b3f767ea763e1cf25f06f)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
adding the license definitions on the few packages that
deviate from the overall package license.
based on http://www.lysator.liu.se/~nisse/nettle/nettle.html#Copyright
and spot checking files.
(From OE-Core rev: 1ef74d73441946bb33f0c86b6e367caaa0074e88)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Menuconfig is sometimes not the most convenient way to configure a
kernel, as the default color scheme can be hard to read. This variable
gives you access to the MENUCONFIG_COLOR variable or lets you select
nconfig, e.g. by setting it in your local.conf:
KCONFIG_CONFIG_COMMAND = "MENUCONFIG_COLOR=mono menuconfig"
or
KCONFIG_CONFIG_COMMAND = "nconfig"
(From OE-Core rev: fd8880aee4f0f8a535616ef312b283f401f64c7c)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several toaster backend tests are no longer valid due to design changes.
(From OE-Core rev: 08a938adbeb809dd3ea3f30ffe8f8bc2c37ed4b1)
Signed-off-by: Mihail Stanciu <stanciux.mihail@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Older kernels (e.g. 2.6.32) don't create an include/generated directory,
so check that the directory exists before trying to copy files from it
in do_shared_workdir().
(From OE-Core rev: 5bebaf37429c28134aeb6fd261e282e9a0397771)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change makes broken symlinks stand out clearly instead of bitbake
failing with odd error messages. Tested locally with broken symlink
as SSTATE_DIR, DL_DIR and SSTATE_MIRROR.
Change-Id: I2e92702237ab3bdb897d0bdefcf33480aabbc288
(From OE-Core rev: f635b9c00aa8a69130e471b9507f263a1ba081ff)
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Subparse works in push mode, chain funciton will be called once
up stream element finished the seeking and flushing.
If set need_segment flag in src pad event handler, the segment
event will be pushed earlier, result in the subtitle text will
be send out to down stream from the beginning.
(From OE-Core rev: 48742378cd91297db439ee83576f3663befaa8f9)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some parser will pass in the original ssa text line which starts with "Dialog:"
and there's are maybe multiple Dialog lines in one input buffer.
(From OE-Core rev: f47e6185a2e88081f98704357e873a04d2e39c40)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting async to false will lead A/V sync problem when seeking.
The preroll need to use GAP event instead of setting async to false.
(From OE-Core rev: c3ed0c2162dcdbb1aced57aed33e2791b81db558)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Detect the memory flag and use gst_buffer_copy_region with GST_BUFFER_COPY_DEEP
parameter to perform deep memory copy.
(From OE-Core rev: 817e542096cf2d415b1725ee98a4d3bbf0ed9415)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-Sending EOS event instead of GAP event as GAP event has error if A/V have the different duration.
-Stop sending second track EOS event when returing failure after sending the first track EOS.
Fixed by ignoring the return error.
(From OE-Core rev: 36dfa24b2a4318b7abe6ab54b64e6c011b8e1e0f)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code will first discard all frames, and then tries to copy
all sticky events from the (now discarded) frames. So change the order.
(From OE-Core rev: 32e88fd0632619c5d3eb95a58a0cceb6f5f6d0d0)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-Add GST_VIDEO_FRAME_MAP_FLAG_NO_REF
This makes sure that the buffer is not reffed another time when
storing it in the GstVideoFrame, keeping it writable if it was writable.
-Use new GST_VIDEO_FRAME_MAP_FLAG_NO_REF to replace the old one because it's kind of ugly.
-Don't ref buffers twice when mapping
(From OE-Core rev: a618f60675dbcc6568d6b9bdee015456cef78a77)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Video buffer pool will update video alignment to respect stride alignment
requirement. But haven't update it to video alignment in configure.
Which will cause user get wrong video alignment.
(From OE-Core rev: d0b5780125926eb33cc82f17c679e16e64312478)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When there is input data and no output data to the end of the stream, it will
send GST_ELEMENT_ERROR and quit from playing.
The patch comments the GST_ELEMENT_ERROR() and just add GST_ERROR_OBJECT()
information instead.
(From OE-Core rev: 0690a52bf48543351cdc85d2b3c8068d54b51768)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use g_utf16_to_utf8() instead of g_convert to fix the issue that
id3 tags utf16 charaters cannot be extreacted in id3demux when try
to get the id3v2 tag such as TIT2, TALB etc.
(From OE-Core rev: 9f8c49862ee67f7f618f102f29f067ec2d712136)
Signed-off-by: Yuqing Zhu <b54851@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
latest gnu-config code has all the patches to support
musl/uclibc upstreamed so lets use it after upgrading to latest
its GPLv3 with autoconf exception but the GPLv2 copy of recipe
is left in as well to not break non-GPLv3 builds
(From OE-Core rev: efb9e4a752c2f6cb637025409cc1ddadd1714ea5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original commit "wpa-supplicant: Fix CVE-2015-4142" included the
patch file but didn't apply it into the recipe, so the backport has
not been effective.
Reported-by: Adam Moore <adam.moore@savantsystems.com>
(From OE-Core rev: 2a8944b63b7249500f1b6b292ce1a87b82699f3d)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original fix is upstream already so mark as a backport, and update the patch
with another race fix.
(From OE-Core rev: ab9d3c4e2bfb68d3a67a85d5a8e799216103978a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop bootchartd-no-bashism.patch as it's been merged upstream
(From OE-Core rev: 274a1cb1bbeea01647a44e50e3323038da3e9647)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'vg' support should depends on virtual/libopenvg. There is no
provider for libvg in OE-Core so this option seems untested being safe
to change.
(From OE-Core rev: 1bb1e73200003703545ac7ec77b6b4c3b28e4fae)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
