The script is used to address build issues when tasks of different
recipes are re-executed. The script goes through all available recipes
and their tasks. The test results are saved in ./reexeclogs. Force build
logs are saved with prefix "force". Build failure logs are saved with
prefix "failed".
[YOCTO #2123]
(From OE-Core rev: 6258a11f22103d68d02e329c2e7fb198202cc6ef)
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new PACKAGEFUNCS function to check the multilib packages'
dependency.
(From OE-Core rev: f193729cdf0f3eccf96a8ce7bf5f599eca89a0d0)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added multilib prefix to the locale related package names/dependencies.
(From OE-Core rev: a52f7cf2cc90d918e3250c410995dcc1f3bfd5ee)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit breaks pkgconfig and after discussing it with the kmod and udev maintainers the conclusion was reached that putting the libraries in /lib instead of /usr/lib is not supported.
This reverts commit 6b74f2461735272bd950a4f060dab6e778a36f92.
(From OE-Core rev: 7163ebd92a799b8f000b2b6f303b20de468b5f90)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xmlto-native is unusable (see YOCTO #2416
xmlto/xsltproc stylesheets cannot be found even when they are installed in sysroot)
* fails like this:
| make[2]: Entering directory `/OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc'
| /OE/shr-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/xmlto xhtml-nochunks Xserver-spec.xml
| /OE/shr-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/xmlto xhtml-nochunks Xinput.xml
| xmlto: /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml does not validate (status 3)
| xmlto: Fix document syntax or use --skip-validation option
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:3: warning: failed to load external entity "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
| "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
| ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:40: parser error : Entity 'ldquo' not defined
| btaining a copy of this software and associated documentation files (the “
| ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:40: parser error : Entity 'rdquo' not defined
| of this software and associated documentation files (the “Software”
| ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:42: parser error : Entity 'ldquo' not defined
| btaining a copy of this software and associated documentation files (the “
| ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:42: parser error : Entity 'rdquo' not defined
| of this software and associated documentation files (the “Software”
| ^
| warning: failed to load external entity "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
| validity error : Could not load the external subset "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
| Document /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml does not validate
| xmlto: /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xserver-spec.xml does not validate (status 3)
| xmlto: Fix document syntax or use --skip-validation option
| make[2]: *** [Xinput.html] Error 13
| make[2]: *** Waiting for unfinished jobs....
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xserver-spec.xml:4: warning: failed to load external entity "/xserver/doc/xml/xserver.ent"
| <!ENTITY % defs SYSTEM "/xserver/doc/xml/xserver.ent"> %defs;
| ^
| Entity: line 1:
| %defs;
| ^
(From OE-Core rev: e8c61491cdd28caa51b567c6ce40155504f9eadb)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user needs read and write permissions to SSTATE_DIR, check
whether they have sufficient permissions and if not recommend
use of SSTATE_MIRRORS.
(From OE-Core rev: 0c0c4efbf92bcf0f8942f17c18525a4b4ed1798c)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates the package version for the vmware xorg driver
to 12.0.2, following upstream. No other changes made beside updating
the checksums.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add two default set(SOURCE_ARCHIVE_LOG_WITH_SCRIPTS, \
SOURCE_ARCHIVE_PACKAGE_TYPE) to archiver.bbclass for avoiding \
building error when forgetting to assign to them.
(From OE-Core rev: 5bda8f33b6763fb519543d0f9e35c970a31d39b8)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make sharing sstate files easier chmod them with 0664 permissions so that they are readable and writable by the user and any other members of their group.
(From OE-Core rev: dae9ad8a0ba0343e3083694cdcb20f0d02927ad0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's common to provide a non-machine-suffixed link in DEPLOY_DIR_IMAGE, so
let's be consistent and do so here as well.
(From OE-Core rev: c1c8d2f3cffc540380c0a5fcdda48d64cbec333a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if a variable is unset or has an empty value, the regex type
will return a match object which always matches. Not all variable types
will necessarily have the same behavior for handling defaults. I believe
that returning a match object which matches nothing when a variable is
unset is superior to returning one which matches anything, and the user
can always explicitly request anything via '.*', if that's what they
want.
This constructs a null pattern object which will never match, and uses
it when encountering an unset or empty variable (currently, these two
things are one and the same, as maketype is handling the default. we may
well want to shift that logic into the individual types, giving them
more control over default behavior, but currently the behavior is at
least relatively consistent -- no difference between unset and empty
variables).
(From OE-Core rev: dc7e4a79d9a1884b4c5705ef3173613958204b50)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A major effort was completed as part of 1.2 to fix many WARNING
messages, change the level of those fixed areas to ERROR so we
do not backslide on our quality level
Signed-off-by: Saul Wold <sgw@linux.intel.com>
App/ExportWizard.cpp depends on wizard.h which depends on ui_wizard. The last one
should be already generated before compiling ExportWizard.cpp.
[YOCTO #2297]
(From OE-Core rev: 2cf6e7cf81c0b864b5d51be60094a6eb3e584383)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you point to snapshot.debian.net/archive/pool then it will fetch
you a html page which will end up in corrupt download. The locations
have changed for archives and here we point the mirror to right
location.
(From OE-Core rev: 15e8aa4cd773022b36a66f70e4f6436289f3d1bc)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We turn on the xlib depdendency for linuxstdbase builds but
were missing the dependency on libx11. This adds the missing
dependency.
(From OE-Core rev: 89c3eb5247d9d15f0beaf397d2aa5332007f229a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While misconfiguring toolchains, I noticed that one of the
diagnostic messages gave me a little less information than I'd
like about what I'd done wrong. Displaying the glob pattern
that couldn't be matched turns out to make it a lot easier to
figure out what you did wrong. (Answer: Not enough coffee.)
(From OE-Core rev: 84d8b8846556cee191afb93016a2c38df8aaa7ba)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wind River uses binary toolchains provided by Code Sourcery, but which
have different values for a couple of the preset variables than the
generic toolchains the external-csl toolchain feature supports. If
these values were ?= assignments, we could just assign values to them
and share the code, rather than keeping modified copies.
(From OE-Core rev: f3c50743917974f0eeab6d9eefc2e7b572a8a787)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fixmepath file that is generated contains a list of all of the files
that need their paths fixed. In the previous version the fixmepath was
generated to include all of the files that sed may have changed. In the
new version, we first grep the files to see if they contain a path that
needs to be changed, only then do we perform the sed operation on those files.
This results in a modest performance increate in the creation of the sstate
file. The following numbers include the do_package and do_populate_sysroot
tasks on the perl recipe.
Before the change:
real 4m23.018s
user 1m57.067s
sys 1m33.327s
After the change:
real 4m13.083s
user 1m54.062s
sys 1m26.064s
However, a more significnt performance gain is felt during the
extraction/install of sstate cache files, as the fixmepaths file now has a
significantly smaller list of files to modify.
Before the change:
real 0m39.798s
user 0m11.158s
sys 0m12.642s
After the change:
real 0m25.511s
user 0m8.408s
sys 0m5.077s
(All numbers above were recorded with a cold filesystem cache on a machine
with 12 GB of ram.)
(From OE-Core rev: 46067264bedeff8248a2b2441733420fe6651f84)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The location of the ccache should not affect the sum in the sstate
files.
The end user should be free to use an external ccache via defining
CCACHE_DIR to a new value in local.conf or using the default per
package local ccache in the temp directory.
(From OE-Core rev: 8d49d92fc2e581820e410c6a4dceb30911d949e0)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are things that depend on the -xlib package. There are two
possible ways to fix this, either recommend them instead of depending
on them, or allow the package to be empty. I'm doing the latter
since its a bit cleaner and less invasive.
This library is a bit pointless which is why there is little point
in adding the x dependency in the non-lsb case. If it becomes widly
used we can rethink this.
(From OE-Core rev: 7d49da7389b5bb0e74d9000b002ebf0bc554e85b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The =~ operator is not one of my favorites, not just due to portability
issues, but because it's not well known, and a lot of people might
not expect a regex operator.
The canonical shell idiom for this is to use case with alternation
and wildcards. As a side note, if you are matching anything containing
core-image-sato, you don't need to also check for core-image-sato-sdk.
(From OE-Core rev: 716ae8dbd1fb29292c9fca0f59d3807a54508e87)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the ofono-tests python scripts, such as test-modem and
receive-sms (22 in total) import gobject. Make the ofono-tests package
depend on python-pygobject.
Tested on the meta-intel fri2 BSP in a core-image-sato image. Assorted
ofono tests run correctly.
(From OE-Core rev: 30708f1b5bc3844e080ef863fdd22446700ba0b1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.
Fixes [YOCTO #2451].
(From OE-Core rev: 36d1717e2ad4ca1620ee9f01b524b5ff2f499b26)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We anticipate signatures being shared amongst peers in a group so ensure
they have rw-rw-r-- permissions to facilitate this.
(Bitbake rev: e4716f316152cafabebcefec7b387edeb02ad3eb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Python documentation states:
"When opening a file, it’s preferable to use open() instead of invoking
the file constructor directly." [1]
Further in Python 3 direct use of the file constructor is no longer
possible.
1. http://docs.python.org/library/functions.html#open
(Bitbake rev: 759f953e29a7131614e5b1f0312edf2b17523675)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With floating revisions and no specified branch, the fetcher could fail
with some obtuse errors. This was due to the branch name being set to None
which makes no sense. This patch reworks some conditions to avoid this.
(Bitbake rev: 740c58d43cfb1445dd126e4827bb70ce988ca107)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the comment says, using packages[0] is rather broken and can be incorrect,
as demonstrated by the recent gdk-pixbuf change. Replacing it with PN is
a bit more correct and more likely to do what was originally intended
by this function.
(From OE-Core rev: 5d0144fe6bd1febc2d1e651bbcff891c80f20b88)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BITBAKEDIR change does not work well when the script is sourced from another script
since $2 may be unrelated. This change adds the logic onto the BDIR conditional and
which more external scripts would set, hence avoiding the problem.
(From OE-Core rev: ec8fbe0d1870285a4a972ddcfe83aa63d720cb80)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having bitbake inside the oe-core is annoying to some people. This commit
adds a second option to the oe-init-build-env script.
Run like this:
. ./oe-init-build-env ../build ../bitbake
for example. Without the second option, the old behavior is preserved.
(From OE-Core rev: 45510a0dd7a9321c29c5b21ac4053192f7ab9ad5)
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One of the patch backends to linux-yocto is guilt, which normally
tracks patches under .git. But .git isn't something that can be
checked into a SCM and repeated. So it has been moved under meta/patches
and committed to the meta branch.
If devshell is used, GUILT_BASE isn't set, so patch manipulations will
fail. We export GUILT_BASE and point it at the meta directory when
devshell is invoked for linux-yocto.
(From OE-Core rev: 10546e42a0db6a9585488536e29759239ef6e73b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.
This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.
(From OE-Core rev: 74daad03ca29a03b0005f7d2b90a0347d5b583a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
External distributions based on the oe-core will typically include
bitbake in the top level directory. The idea is to make it easy
for external distributions to easily assemble a distribution
with a pristine version of oe-core, add avoid the git untracked messages:
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# bitbake/
[RP: remove leading slash]
(From OE-Core rev: 9cd30beba77497288eeb2545920bc23f2a77cf16)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libext2fs is located in base_libdir, not libdir
(From OE-Core rev: 683bc278d8695ecf4c8658ab39266279c6bf26d4)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a pathological case, lots of files to process, the sstate_installpkg
performance was very poor. It interated over each file and ran 3
individual sed commands per file. Changing this to keep iterating
but running only a single command took about 1/3 time time.
However, when looking at the corresponding sstate_hardcode_path
function, it was clear we could optimize this further.
Using the same encoding logic to specify only the minimumal sed
operation necessary, and using xargs to avoid the os.system call the
install step was able to be performed in 13% of the original time.
Example timing numbers for perl:
3m7s original code
1m20s single sed, but interating
0m26s using xargs and limited sed
(From OE-Core rev: d9f655753fbdc8cbd8e705577430fed4f23732b3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
because of having "--without-x11" for gdk-pixbuf_2.24.1.bb.
Use the linuxstdbase override and also make it conditional on x11 \
being in DISTRO_FEATURES for passing lsb test.
Split libgdk_pixbuf_xlib to a single package.
(From OE-Core rev: 4cb21630cf87e6cc9a062f1c2be9fea25d3e218a)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
which are created by gdk-pixbuf_2.24.1.bb.
So add this library to core-image-lsb for passing lsb test.
[RP: Fix whitespace]
(From OE-Core rev: e79f19ef4fb59d6dc14ea139d4e4b132add80842)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes bug [YOCTO #2443]
The prototype of findidx() has changed, but the code in xregex.c is
still using the old prototype. This issue stayed hidden because this
code only gets excercised when OPTION_POSIX_REGEXP_GLIBC is disabled
in the eglibc configuration.
See the patch for further information.
(From OE-Core rev: 8691038efb0aca4a2cd61fce0c53d10092e48b75)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jiajun Xu
Lianhao Lu
Koen Kooi
Martin Jansa
Joshua Lock
Alexandru DAMIAN
Laurentiu Palcu
Bogdan Marinescu
Xiaofeng Yan
Christopher Larson
Saul Wold
Andrei Gherzan
Marko Lindqvist
Khem Raj
Richard Purdie
Peter Seebach
Mark Hatle
Jason Wessel
Darren Hart
Paul Eggleton
Philip Balister
Bruce Ashfield
Andreas Oberritter
Nitin A Kamble