Disable nfsv4l since it needs LVM2 which
is not available in OE-Core
Disable nfsdcltrack since its configure time check
for sqlite3 is not cross compiling safe
It can support ipv6 but thats disabled since
we disable libtirpc which is needed for ipv6
support in nfs-utils
Patches imported from fedora to take us to 1.2.8-rc3
(From OE-Core rev: 658bfe4690005d0a68dc4e3ca2bc741ff4c89f28)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multicore embedded systems are getting more and more common.
Remove "--disable-openmp" from the GCC configuration options and
always build libgomp. This only creates a "bigger" compiler but
has no effect on the compiled binaries that don't use openmp.
Tested a clean build on mips32el and arm7a, no problems encountered.
Autoconf will not detect OpenMP after this change, because it will
build and run a target binary on the build system. In order to use
OpenMP, the variable ac_cv_prog_c_openmp=-fopenmp must be set.
(From OE-Core rev: fdf37b792c13a1fc3f63faf471f0403396414a35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rearrangement of various file contents left these empty modules which
don't get packaged and hence lead to image creation errors on anything using
them. This patch ensures the dependencies are attached to the packages
which contain the config files or the build module infrastructure as
appropriate. It also resolves some confusion over whether the name is
perl-module-build or perl-module-module-build, the latter being the
autogenerated dependency which previously couldn't be found.
(From OE-Core rev: 442f161ecd498513b72e7f1ca2668325c9389d24)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch perl to allow builds to work where a native perl running against target modules
attempts to load a dynamic binary module. We assume that a native version of the
module exists as it would for the target and perform an appropriate path
substitution.
(From OE-Core rev: b5ea12fec329fe419bc3672ed1e1d5733ff2a9d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apply the errno_ver.diff patch to the native perl version. This ensures that when
we're building target modules, running the native perl binary but in a target
configuration we don't see error messages.
libencode-detect-perl is a module which tests this.
(From OE-Core rev: 52354c863a1a2e467ea1b55168bf4273f31bbba4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Certain cpan Build.PL based modules were failing to build due to
the host's config information being used instead of the targets.
This patch sets the appropriate variables to ensure the modules
get the correct configuration from the target config_heavy.pl script.
It also ensures the linker is CCLD, not LD since the LDFLAGS contain
-Wl,XXX options and build failures result if LD is used.
libencode-detect-perl is a module which tests this class extensively.
(From OE-Core rev: 7fac8bffcd250aec90c0b675aeb2bbe7896d0ae1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the maintainers.inc file replacing the maintainer Scott Garman
with Andrei Dinu.
(From meta-yocto rev: a15cdd80e8a9674070150f54dd34fc7c1d78dfdc)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- the new PRSERV_HOST format is 'host:port'
- PRSERV_PORT has been removed
(From meta-yocto rev: 67585e11f1e75e380de3ead4bb36de5129df2c4e)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The get_file_layer can't handle the nested layer correctly, e.g.:
meta-intel/conf/layer.conf
meta-intel/meta-cedartrail/conf/layer.conf
They are two layers, the file:
meta-intel/common/recipes-bsp/amt/lms_7.1.20.bb
belongs to meta-intel's layer, but the get_file_layer() may return
meta-cedartrail accordig to BBLAYERS' order, since it uses:
for layerdir in self.bblayers:
if regex.match(os.path.join(layerdir, 'test')):
return self.get_layer_name(layerdir)
which doesn't care the filename, re-match the filename would fix the
problem.
[YOCTO #3387]
(Bitbake rev: 7a31b9eac4d894c302f0e052a132c31b17d13d1f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two "self.file_depends =" lines in cache.py::CoreRecipeInfo:
class CoreRecipeInfo(RecipeInfoCommon):
__slots__ = ()
cachefile = "bb_cache.dat"
def __init__(self, filename, metadata):
self.file_depends = metadata.getVar('__depends', False)
[snip]
self.file_depends = metadata.getVar('__depends', False)
They are duplicated, remove the last one.
[YOCTO #3795]
(Bitbake rev: 409a4aa0e166c25a8cfcd91e54f1b61cced74e87)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If .hob exists, hob takes the variable from there. Change to not override anymore
the variables which comes from bblayers.conf and local.conf
[YOCTO #2934]
(Bitbake rev: 00533e83038e3d5e3cd5d1be73c45afece92ec0c)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- remove PRSERV_PORT variable
- use 'hostname:port' as PRSERV_HOST format
- use 'localhost:0' for enabling the local PRServer
[YOCTO #3744]
(Bitbake rev: ad62eed9e1f0867a406e9fbfa44916a0f1ad1282)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want the perl module dependencies being added to each package
by rpmdeps because it causes too many problems when the modules aren't
available at install time (since they get added in do_package which is
too late for the build system to ensure they are available), and it
appears that the perl dependency gathering isn't working reliably in any
case judging by how they are detected on some build hosts and not
others.
This was being disabled previously but it seems like the macros moved
to a different file at some point and nobody noticed; thus make sure we
disable the macros in all RPM macro files.
Should fix [YOCTO #3699].
(From OE-Core rev: e43a72af9055b76eb2ad7e2e42e6a5f3c8854efa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ppc discovers an interesting issue in linking systemd where a library is
missing in link cmdline and linker barfs
./.libs/libsystemd-core.a(libsystemd_core_la-manager.o): In function
`manager_check_finished':
/builddir/build/BUILD/systemd-196/src/core/manager.c:2092: undefined
reference to `sd_notifyf'
collect2: error: ld returned 1 exit status
For more info see
https://bugzilla.redhat.com/show_bug.cgi?id=888255
(From OE-Core rev: 2e2a91025ca9c113365c810ce08b48201fe792b8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was pointing to the zypper homepage, presumably a copy-paste error.
(From OE-Core rev: 5f363483253af712f8ccb173c4cc9d77b7c1ae8c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove references to libzypp, zypper and sat-solver which have been
removed.
(From OE-Core rev: cc9144f99844a8485b2b96182bdf40429286ae66)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was only needed by libzypp, which has itself been removed.
(From OE-Core rev: 905f0d407a259f89e420ccdbee5a471cb0fea8f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was only needed by zypper, which has itself been removed.
(From OE-Core rev: 5c8169bd1c114aab76001a38ee4dd68d00d825e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Functionality provided by Zypper is now covered more effectively by
Smart (python-smartpm) which is now being used for package management
on the target when enabled and RPM packaging is selected.
Fixes [YOCTO #3349].
(From OE-Core rev: cc866433341532a0b5cf8cd5f67998960ea96499)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If multiple recipes try and write the same package it resulted in a
rather confusing traceback and unintuitive error. This patch
prints a human readable error instead.
[YOCTO #3645]
(From OE-Core rev: 6f817779af77fdb0b861297f0f43c4c6607ce6f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids tracebacks from bitbake if the directory doesn't already
exist.
[YOCTO #3640]
(From OE-Core rev: 1a60e96b21d328fe936e594f3061459e8f2f1b5e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently hardware codecs are being injected in rather ugly ways and end up
either in no or all images. This adds a dedicated IMAGE_FEATURE for them based
on the MACHINE_HWCODECS variable. We may need to refine this in due course
but this patch at least illustrates the concept.
(From OE-Core rev: 1cb370587fd72e3f0f69678748108cc4116767fb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At present its hard for the system to provide extra x11 hardware codecs.
We could lump them in with the XSERVER variable but this is suboptimal as
in some use cases the user might not want to include them in some images.
With this patch we keep our options open about separating usage of the two
in the future.
(From OE-Core rev: 285c7577813cf75a3b554f8a5d6d7ba002127ef4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backfilling DISTRO_FEATURES and MACHINE_FEATURES with _append statements happens
too late to use those variables with conditional inherits, like this:
inherit ${@base_contains('DISTRO_FEATURES','sysvinit','update-rc.d_real','',d)}
Instead, do the backfilling at ConfigParse time so that it happens earlier in
the parse, which results in that inherit behaving as expected when sysvinit was
backfilled.
(From OE-Core rev: 22429cdf79ed952072707a929643c7386fa7e056)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 9e7c64ca9afbf27edd0d35a1830ce55ee6d778ab broke all builds where
custom DISTRO_FEATURES were used.
Resulting images ended in non-bootable state due to lack of initscripts
(unless someone had sysvinit or systemd in D_E already).
https://bugs.launchpad.net/linaro-oe/+bug/1102910https://bugs.launchpad.net/linaro-oe/+bug/1099405/comments/12
(From OE-Core rev: 211e473432230765a48d7af9c66c8737a08cdec7)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use migrate_localcount.bbclass to generate AUTOINC entries
which are exported to LOCALCOUNT_DUMPFILE
- import the generated AUTOINC entries
- one can migrate LOCALCOUNT to AUTOINC by executing:
bitbake-prserv-tool migrate_localcount
[YOCTO #3071]
(From OE-Core rev: ffab86f13cafb10d8d6273b6af8cd9a3c84eae20)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed to to boot efl images on qemuarm,qemumips and qemuppc
these options were already defined for qemux86 and qemux86-64 and
therefore the images were booting fine for these two machines
(From OE-Core rev: 60e73068cf542c2134106fe6cfc5971874bbc766)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemd has some uclibc specific patches which
needed to be forwarded ported to 196
(From OE-Core rev: e39f01ba4f6d9d9f1d24fd01745530cde9e92131)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the /etc/rpm-postinsts/ directory was empty, the following error
would occur at system startup.
ERROR: postinst /etc/rpm-postinsts/* failed
This patch fixes this issue.
[YOCTO #3767]
(From OE-Core rev: 202263aeca837dc7b6615a3dc34569c199163733)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent change to blktrace removed the do_install method,
since this recipe does not use autotools it needs to specifiy
a do_install activity.
(From OE-Core rev: f8832d969746fb879e63d1b28e6beef5ab82a39d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit c04f5435 "populate_sdk_base.bbclass: use SDK_ARCH instead
of SDKMACHINE" prevents not only the installation of 64 bit SDK
configurations on 32 bit hosts (which indeed cannot work), but also
the legitimate installation of a 32 bit SDK on a 64 bit host.
Fix this.
While there, also make sure we use the same patterns ("i[3-6]86" resp.
"x86[-_]64" to get unified strings for both INST_ARCH and SDK_ARCH.
(From OE-Core rev: 7ddd97b9b09fe7a327916ea88908a63375556ae6)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"RDEPENDS_${PN}_class-native" doesn't work for native recipe because no
-native package will be created. Then the dependencies listed here are
not built when bitbake createrepo-native.
Update and use DEPENDS_class-native instead.
(From OE-Core rev: 0b8dc781e4df0edffa10ac989f8745ac3f684de0)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The nslookup is not shipped for now, we should disable its man page if
the binary tool is not installed.
[YOCTO#3754]
(From OE-Core rev: 1a31918733a7f8479220c01fc99dd9099fdcaf9b)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'select a base image' option is no longer displayed once
an image is selected
[YOCTO #3671]
(Bitbake rev: 27f2247b4c227c3b5adb1ca33d0cd7f7b492e170)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- one can use get_by_pattern to get a list of values associated
with keys that match the specified pattern
(Bitbake rev: 6ee1f58698e2d782c54ce5aec271bcec26107eac)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- enable the '~' character in bitbake variables
(Bitbake rev: 7c15ff1d50d7b601414f1d55c90e3c59981a0876)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-now Hob catches the warnings generated during parsing, and after the parsing
is completed, if there are any warnings, it shows a bar that contains a message
with how many warnings has encountered, and a button "View warnings"
-when "View warnings" button is clicked, Hob shows a dialog with the warnings;
if there more than 1 warning, you can use "Previous" and "Next" button to see them
[YOCTO #3215]
(Bitbake rev: d7b5311d35b3974398fecabfb5ecf1effa85c27e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-the first implementation for this bug used a progress bar, that is shown
during open file process; it revelead that the progress bar stops earlier
-now I have implemented using gtk.show_uri() method, that shows itself a
busy cursor when it opens a file;
-deleted the code for the first implementation
[YOCTO #2997]
(Bitbake rev: 09d1c4c2db124104b9da460547b20a2c2ff07bb3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As this package RDEPENDS on systemd it wants to build systemd, but if systemd
isn't a DISTRO_FEATURE then that package is skipped so world builds fail. Solve
this by skipping this package too.
(From OE-Core rev: 192efd033c38205e114f62e9f62696a9a49b0970)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If configure of perl is reattempted it currently fails as it tries to edit
files outside ${S}. Chaging from ${WORKDIR} to ${S} avoids this issue
and allows rebuilds to work.
(From OE-Core rev: 1b66c30eb6085aedce118ce086efbd2e562d0d6c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discussion has revealed that upstream has formally rejected patches to support
uclibc, so mark this in the headers.
(From OE-Core rev: caf6aa1c996a949ca85f4beaf40d2a19433d18c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GUPnP is now in meta-multimedia, so remove it from this SDK packagegroup.
(From OE-Core rev: 356a5ee5a74f9cee112eac2c595c13ef707eca82)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The GUPnP stack was stagnating in oe-core and untested. It's now moved to
meta-multimedia where it's also been upgraded.
(From OE-Core rev: 51e548a4e61709d9d87a424586529638873835b3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj
MiLo
Richard Purdie
Andrei Dinu
Constantin Musca
Robert Yang
Cristiana Voicu
Paul Eggleton
Radu Moisan
Marcin Juszkiewicz
Chen Qi
Saul Wold
Wolfgang Denk
Kang Kai
wenzong.fan@windriver.com
Ross Burton