These changes reflect corrections resulting from Jessica Zhang's review
of the sections.
(From yocto-docs rev: c3fed39bc3909c38424e7e72c40471dcb0053c8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After working through this stuff I was still confused as to how to
guide the user toward proper toolchain installation and on what they
needed to do for collecting their kernel and filesystem images.
These changes included some information on when and how to extract
the rootfs when the user is booting to NFS. Plus some other
general items like the significance of meta-toolchain-sdk as
compared to meta-toolchain.
(From yocto-docs rev: 2cc88b5193888a074ffd87cb253b9cfe08146877)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had definitions for "The Yocto Project Files" and "The Yocto
Project Build Tree" in this chapter. They were misplaced. I have
deleted them and moved them to the development manual.
(From yocto-docs rev: 9238e75abc4578043fd625b3796b86d42204e16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of writer notes for development purposes. I also
formated the section title references so they have quotes around them
for easier reading in the PDF verison.
(From yocto-docs rev: 37adb580cf6c1369da43fc4ef7aaa4cc1cee0e5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered that in order to remotely deploy and debug an image from
Eclipse you have to have a Sato image. I added text to the note about
getting or building the image specifying that requirement.
(From yocto-docs rev: 060de7f6082bc3dbfa0f7d4e25b2933f15a61fc0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits are extensive and cross into two files: adt-prepare.xml
and adt-eclipse.xml. This is the first pass of a large re-write
to bring the examples up-to-date using the preferred version of
the Eclipse IDE (Indego 3.7). Much has changed.
(From yocto-docs rev: 57c1f905c6d66268a498e013193d003596f2303d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the variable name of the adt_installer.conf file that points to
the IPKG repo. This changed for 1.1. Also made some small edits.
(From yocto-docs rev: 893b8b2f4bed8d4fce9a876e2184b3f5b9b004c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a link to the getting setup section of the YP dev manual for
help on setting up the YP files.
(From yocto-docs rev: 13832465de69bc41ddcc5e5696e707be8a3b6c5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the manual and made some general formatting changes,
updated some links in anticipation for the 1.1 release.
(From yocto-docs rev: f2d3a012fbe4e8db3cf07e5497acfdf732e55d97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In anticipation of 1.1 I have changes several filenames that
had "1.0" to include "1.1" instead. I am unsure if the names are
correct at this time. I will need to check them when the release is
created.
(From yocto-docs rev: ae50f920c5cf18f6c0494280a453feb41ef56d83)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also added some general punctuation edits.
(From yocto-docs rev: e9a689655c6e88e735944084e5dda32800a6e6ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armed with a better understanding of sysroot I made some edits to
help better define what is going on with the various sysroot
variables in the adt installer configuration file.
(From yocto-docs rev: 2b63e1f0f57c701eb38de7f9b9057567786b9899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note indicating where you can get sample kernels and
filesystems suitable for QEMU had a wrong path. I added
"machines" to the path. Also made a wording change.
(From yocto-docs rev: 75261eb7a44dcc990a817b5b59323042c38b6839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example command I used to setup the cross-toolchain environment
was incorrect. I added the "1.0" to it.
(From yocto-docs rev: b8bb60ec69296e9c927735f3fca86013e8b2624e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Significant re-write to every section in this chapter except the
"Setting Up the Environment" and "Kernels and Filesystem Images"
chapters. I established some terms to communicate the build and
source trees and the build and source top-level directories for
YP. These terms had not been consitently communicated. I also
stepped through each of the three methods by which a user can
install ADT (and the cross-toolchain) and meticulously documented
the steps. The result is a much more complete and clear set
of procedures.
(From yocto-docs rev: 37076a07ccc748ceb416c4bc3a57b698f6e8d80a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a stray "0.9" in an URL for the Yocto source downloads.
I changed it to 1.0.
(From OE-Core rev: 82890a85c0422aa6b081497be394aa756da567b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note in the "Installing the ADT" section (2.1) saying that
if you need to build the ADT tarball you can use
'bitbake adt-installer'. I also changed the location of the
toolchain from '...yocto-0.9' to '...yocto-1.0'. Finally,
I changed the host sub-directory in the toolchain directory
from 'i586' to i686'.
(From OE-Core rev: 18124c5065fc570e672d068e915e0f476d20379c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is the initial draft of the preparation chapter (chapter 2).
(From OE-Core rev: c32b215eb37828cd31c0c9ba288c2216fcd034de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial chapters were failing to make due to duplicate section
identifiers that were created when I copied in the original files.
I gave each of the five chapter files (adt-command.xml, adt-eclipse.xml,
adt-intro.xml, adt-package.xml, and adt-prepare.xml) unique identifier
tags.
(From OE-Core rev: d30460c835c51dcc9301bcd848ceda29ba9ceeb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added a new directory to documentation named adt-manual.
This directory holds a Figures folder, and the 9 files needed
for the ADT manual. The book consists of five chapters:
adt-intro, adt-prepare, adt-package, adt-eclipse, and adt-command.
There is also a adt-manual.xml file called by the Makefile.
There is also a style.css file. And finally, a adt-manual-customization.xsl
file to control numbering.
(From OE-Core rev: ac2c8848bbefcf7d24192573904baaef87c67382)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>