Make sure there's no chance of anyone forgetting they have a recipe set
up for externalsrc; otherwise you could get confused about what is going
on. (With our default logging setup we can't make it a note because the
UI doesn't forward those; otherwise I would have used bb.note().)
(From OE-Core rev: 7b73473bc9d19331a103cf4958059d3ceb84b486)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Here we set SRC_URI to blank, however doing so means that the function
that is called when you expand the default value of SRCPV
(i.e. bb.fetch2.get_srcrev()) will fail, so any recipe that references
SRCPV in PV couldn't previously be used with externalsrc.
(At some point we may fix the function to work in the externalsrc case,
but then we would also need to ensure that ${B} did not change as a
result of PV changing any time the HEAD revision changes in the external
source tree, or you'll lose any intermediate build artifacts.)
(From OE-Core rev: 26f8060c3475ec988194b2163e422ba4e776fd8b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel.bbclass adds ${S} do do_clean[cleandirs], but this means if you
run bitbake -c clean <kernelrecipe> then your external source tree will
be trashed, which could be a disaster. For safety, remove ${S} from
cleandirs for every task. We also have to do the same for ${B} in the
case where EXTERNALSRC_BUILD is set to the same value as EXTERNALSRC.
(From OE-Core rev: b5071fb2667b8751885d38ca62fa36c870177cd5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For recipes that have their actual source in a subdirectory of what is
fetched (e.g. mkelfimage), we need to find the root of the repository
within the GitApplyTree code that attempts to set up the required git
hooks and use that, rather than expecting the root to be the same as
${S}.
(From OE-Core rev: d820303f64ea610338ec11ffd79269e7831d1da9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes:
- BlueZ 5 native HSP (headset) support;
- BlueZ 5 HFP (hands-free) profile support via oFono;
- systemd socket activation support;
- Better support for multichannel and 2.1 profiles;
- Remap optimisations;
- Many minor improvements, bug fixes, and i18n updates.
- Switched to ${BP} variable.
- Patch 0001-configure.ac-Check-only-for-libsystemd-not-libsystem.patch
removed, no longer necessary.
- Patch CVE-2014-3970.patch included upstrem, removed.
- Slightly changed copyright notice, only a clarification.
libsamplerate based resamplers are now deprecated,
because they offer no particular advantage over speex.
Dependency to libsamplerate0 dropped.
[ RB: disable systemd until systemd.bbclass can handle user units ]
(From OE-Core rev: c4de42aadd4c8a4a8f16c25e7dcdefef79daf030)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason not to use ext4 at this point, it has advantages
and few drawbacks. Therefore switch the qemu machines over (and the default
runqemu script options).
(From OE-Core rev: 430b9ae71b1aa76f8421127d17e0e0723d4818d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a variable that allows us to map the OE-Core layer to the name that
represents it in the OpenEmbedded layer index. This will be used by
bitbake-layers layerindex-fetch so that it knows that for example
OE-Core is already fetched and included in the current configuration.
Note - it won't be required for us to go around and set this for every
layer - we can do the matching based on repo and subdirectory, but
OE-Core is somewhat special in that it does sometimes appear in
different places, for example in poky.
[YOCTO #5348]
(From OE-Core rev: d1cf0edd79ec3ba3bd17126183e4cb99aa50ffaf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add BBLAYERS_LAYERINDEX_URL variable that bitbake-layers can use to find layer index.
Add BBLAYERS_FETCH_DIR variable that bitbake-layers can use to specify fetch directory.
[YOCTO #5348]
(From OE-Core rev: ae585a7d2744222606aeb533815d22ade8e10097)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake-layers subcommands with underscores are the old syntax; the
dashed form has been supported (and displayed in the help text) for
quite a while now, and the old syntax is about to be unsupported, so use
the dashed form in the tests.
(From OE-Core rev: ab2efd82b2c3419e0139b91c79a9993b257970c9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now can support musl along with uclibc and glibc
earlier when only alternative was uclibc this check was fine
but now we need to consider non-glibc vs glibc case instead of
uclibc vs glibc
Change-Id: Id794ce193c6557b5435002a8f9b6eb608738b696
(From OE-Core rev: 5d7bc14d22da87837741fefae5924571fdff750d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lets try to use musl version of libintl and see how far we get
Change-Id: I0259049eb6461ab9b579c7f3ad401fefede24621
(From OE-Core rev: 4ed94affbce657db58c5099c8882a8d0292abaf1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
lttng-tools-2.6.0: lttng-tools-ptest rdepends on libkmod, but it isn't a build dependency? [build-deps]
lttng-tools-2.6.0: lttng-tools rdepends on libkmod, but it isn't a build dependency? [build-deps]
(From OE-Core rev: a79d489a2fa532e6f87fe3cf0b55485fb08fd72e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch can't be applied by "git am -3" with newer version of git
(such as 2.0.1), and can't be applied by "git am/apply" with any
version, now fix it
(From OE-Core rev: 14990de8c7481c3aaf77174a7541d5bfb9a7411d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Profiling a core-image-sato-sdk rootfs, we're spending over 40s
compiling the same regex over and over again, roughly around 5 million
times.
This is suboptimal, fix for a 40s improvement on a 18.5minute task execution
time.
(From OE-Core rev: d0244702752f54fb74be427af1663e46bfff9a5d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
See the patch description, this adds a tweak to an algorithm to improve
core-image-sato-sdk mkfs time from over 8 minutes to about 35s.
Needs discussion upstream but seems reasonable for our uses of it.
(From OE-Core rev: 468fa9a7fac86bb0fcd3cbd18dc1492b57ca25f3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* each DEFAULTTUNE with thumb enabled should list it's arm variants in
PACKAGE_EXTRA_ARCHS, otherwise packages which force arm ISA won't be
found in do_rootfs
* armv7athf-neon-vfpv4 was missing its own PACKAGE_ARCH and also the arm
variant
(From OE-Core rev: fd7f3cd9affbfb9ce483a5a1d6054da2365fcb0e)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this means that recipes with ARM_INSTRUCTION_SET explicitly changed
to arm will be built in feed without thumb suffix, the same does apply
for workdir, e.g. after "bitbake glib-2.0" you can see:
tmp-glibc/work/armv5e-oe-linux-gnueabi:
glib-2.0 glibc glibc-initial
tmp-glibc/work/armv5te-oe-linux-gnueabi:
acl db gdk-pixbuf kmod ....
and
tmp-glibc/deploy/ipk:
all armv5e armv5te qemuarm
* feed config should be ok, because all default DEFAULTTUNEs always
include "arm" variants of all supported PACKAGE_ARCHs
* for more details see
http://lists.openembedded.org/pipermail/openembedded-core/2014-April/091960.html
the toolchain path issues were resolved in 1.8
* add ARM_INSTRUCTION_SET = "arm" to glibc-collateral.inc and comment in
glibc.inc to fix glibc-locale and glibc-scripts build
(From OE-Core rev: 3e760031f91fb87c3e2f62b77a117eb41164f259)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* refresh/cleanup the patch to apply cleanly on 2.0.9
* get rid of configure - it's autogenerated
* configure.ac: use aarch64* wildcard
(From OE-Core rev: 66457319e4050fee569aeccd1fe98fbf9f046f02)
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The xorg font builds use `pkg-config --variable=mapdir fontutil` to
locate encoding maps. This variable ought to be sysroot-relative, but
neither pkg-config nor font-util nor the fonts themselves provide any
facility to add the sysroot back in.
We're presently adding the sysroot by by twiddling MAPFILES_PATH in
configure.ac. This is broken; it's actually defined in aclocal.m4,
because the definition is provided by fontutil.m4. Another (more
speculative) criticism is that it also hardcodes a build-specific
absolute path into builds which might (incorrectly) encode it into
target-installable packages.
A somewhat more robust, focused, and clear solution is to override
UTIL_DIR on the make command line. (UTIL_DIR, not MAPFILES_PATH, is what
is actually referenced in the build.)
(From OE-Core rev: 5cd320d8d21cd784b32f12a6944dc647a75abf94)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MAPFILES_PATH is a configuration variable that is used by packages using
font-util, which tells those packages how to compute it in fontutil.m4.
Presently, we're manually twiddling things so that MAPFILES_PATH will
consult the native sysroot, when building under *any* architecture.
This complicates building other packages immensely, and also generates
broken on-target packages, because the contents of font-util-dev will
reference the native sysroot on the build machine (!).
We don't even need to twiddle MAPFILES_PATH anymore so just delete it.
This code also had a path bug (referencing /usr/lib/pkg-config instead
of /usr/lib/pkgconfig) which is also fixed by deletion.
(From OE-Core rev: 4199703db82d79408e0575e1332ad79375e14c39)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
font-util installs encoding maps into /usr/share/fonts/X11. This path
may not exist on the host (many distros install these into
/usr/share/fonts/util) so they must exist in the sysroot in order for
e.g. `pkg-config --variable=mapdir fontutil` to work correctly. However,
currently /usr/share/fonts is explicitly not installed into sysroots, so
the encoding maps were not getting found.
Fix this by explicitly staging ${datadir}/fonts/ into the sysroot.
(From OE-Core rev: a1598266c828ad0b73df971b22d6a2e3e1dd5cab)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SYSTEMD_SERVICE doesn't need to be set conditionally, and units should be
installed if the systemd DISTRO_FEATURE is enabled, not if sysvinit isn't
enabled.
(From OE-Core rev: bb8a7b906204b25f07fe568883c2d605593c323c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 0b891265716c414ade29d587fc1a3c4ea7beadbe.
U-Boot does support AArch64, this however was only added to newer
versions of U-Boot and at the time of this original commit the U-Boot in
OE-Core did not support the 'arm64' architecture. OE-Core now has a
newer version of U-Boot for the mkimage recipe and thus supports the
'arm64' architecture.
(From OE-Core rev: fd8158134f3d7a7c795c818cc50eb2858a6cae06)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 32848c7015f5d70c4245a9b1bb77c21faef8653d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 66be4fc8bd08df1c2807a61eebbae912cf07157d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 8846e5a1896bc2083a326cc542d2cdde83b915da)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 92a27c29570541564d65bf43325a333960b40183)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the patch since upstream has fixed it:
0001-test-ippserver.c-check-avahi-before-use.patch
(From OE-Core rev: e1a8de7d55710199d357c88c22f3f1887d562b61)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
quilt-0.63.inc -> quilt.inc: we don't have multiple quilt-xxx.inc, so
use quilt.inc rather than quilt-0.63.inc.
(From OE-Core rev: 941be822ee7772b70fe78e6b61278bb8567bc905)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to version 2.5.3 to match trace-cmd.
Changes include:
- Remove kernelshark-fix-syntax-error-of-shell.patch (the syntax error
is no longer present in the new version).
- Specify bindir_relative and libdir in EXTRA_OEMAKE as in the
trace-cmd recipe so files get installed to the right place.
Additionally, remove unnecessary EXTRA_OEMAKE options.
- Fix up the do_install steps to remove the plugins directory; that
directory now lives under /usr/lib.
- Set NO_PYTHON=1 because building the ctracecmd Python module requires
swig, which is not available in oe-core.
(From OE-Core rev: 2f177644dab083bc5306bce1bf2ff2ef8851c862)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating adds new features including the very useful 'profile' option.
Changes include:
- Remove addldflags.patch (already upstream in the new version).
- Remove make-docs-optional.patch (docs are built in a separate target
in the new version).
- Update SRC_URI, SRCREV, PR, and PV in the .inc file and don't
override them in the recipe.
- Fix a typo in LIC_FILES_CHECKSUM so 'endline' is properly defined.
- Drop PR.
(From OE-Core rev: 30eba39bd3b915477c584d8bebd194446497175e)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.19 kernel introduces this error, ignore it for now.
(From OE-Core rev: 2a0a14275ca00b2d3ca867c82548a41e3bb10986)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta data (in tree or out of tree) that describes a BSP, its patches
and configuration is not always available when a new/default or manually
configured machine is built.
When this happens, the tools generate a skeleton BSP and use a
architecture defconfig for the build. If this is by design, the build
is typically sane and everything works fine. If an existing BSP
description was expected, chances are that the resulting kernel will not
be correct.
To avoid surprising the user when a default/skeleton BSP is used for the
build, we can make it obvious to the user by emitting a warning like
the following:
WARNING: [kernel]: An auto generated BSP description was used, this normally indicates a misconfiguration.
Check that your machine (myqemux86-64) has an associated kernel description.
[YOCTO: #3383]
(From OE-Core rev: f4a460afc4e2676cbf1daaa1d6723da9e6146526)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introducing the v3.19.x recipes for the validated linux-yocto kernel.
Build, boot and sanity testing was performed on qemu for all major
architectures.
(From OE-Core rev: 329a028bec428e8dc8cf3420c6e462de2898c8aa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In accordance with the kernel release criteria we support the latest
mainline kernel + the last LSTI kernel + a development kernel.
3.19 will be introduced as the latest mainline, and 3.14 is the released
LTSI kernel, which means that we remove the 3.10 and 3.17 variants.
(From OE-Core rev: 19203a95f4b65e0a009a738fb4fc216e985a0835)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After a linux-yocto style kernel is configured, a kernel configuration
audit is executed to detect common errors or issues with the config.
This output used to be visible, but was made less obvious to not alarm
users unnecessarily (since some configuration issues are acceptable).
There are some classes of configuration issue that are worth being
visible, and that is specified configuration values that do not make the
final .config. These dropped options can result in any number of runtime
failures, so flagging them at build time makes sense.
The visibility of auditing is controlled by KCONF_AUDIT_LEVEL:
0: no reporting
1: report options that are specified, but not in the final config
2: report options that are not hardware related, but set by a BSP
The default level is 1, with level 2 and above being for BSP development
only.
If these conditions are detected, warnings will be generated as follows:
WARNING: [kernel config]: specified values did not make it into the
kernel's final configuration:
Value requested for CONFIG_SND_PCSP not in final ".config"
Requested value: "CONFIG_SND_PCSP=y"
Actual value set: ""
or
WARNING: [kernel config]: BSP specified non-hw configuration:
CONFIG_BLOCK
CONFIG_CFG80211_WEXT
CONFIG_CORDIC
CONFIG_CRC8
CONFIG_EFIVAR_FS
CONFIG_EFI_PARTITION
CONFIG_NET
CONFIG_NETDEVICES
CONFIG_PARTITION_ADVANCED
CONFIG_WEXT_CORE
CONFIG_WEXT_PROC
CONFIG_WIRELESS
At this point thse are only a warnings, since there needs to be time for
layers and configuration fragments to be validated against this new
check.
[YOCTO: #6943]
(From OE-Core rev: ad4d59495194b37bc510e9891bd14c0a2ac30dba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the libc-headers now that the kernel has released.
(From OE-Core rev: b3721560fe523c144690ebfeb203b3735d0f6843)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop CVE backports and ppc/fpu detection patch which is not needed anymore
Forward port eglibc option groups patch
Default to using glibc 2.21
Additional patches needed to appease -Werror option
Change-Id: I1873097cec8387ea9e8186a255122938fc28c976
(From OE-Core rev: 6617cc92076764d51f0190786f8d62b8c99ae984)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lzo_init checksum changed due to date change, not license change
(From OE-Core rev: ad016fa7492ba23c751cf33dd1befde7782facfa)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
unix/os.o: file not recognized: File truncated
collect2: error: ld returned 1 exit status
This is because os.o was built twice:
* The implicity rule (depends on unix/os.o)
* The "make all" in unix subdir (depends on unix/os.o)
Depend on subdirs which is unix only rather than unix/os.o will fix the
problem.
(From OE-Core rev: 1af699e1af2552659b90a1fadd8de73d780226ba)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
mkfs.c:300:46: error: 'BTRFS_BUILD_VERSION' undeclared (first use in this function)
fprintf(stderr, "mkfs.btrfs, part of %s\n", BTRFS_BUILD_VERSION);
(From OE-Core rev: 5808c423a2cbea9f2f6a9f78ce5ca09864dc6a75)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because of the SSLv3 POODLE vulnerability, it's preferred to simply disable
SSLv3 even if patched with the TLS_FALLBACK_SCSV
(From OE-Core rev: 4e691d06ffdb4d1fd940996f419308fe53454df7)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow globs in CONFFILES.
This patch changes the way of CONFFILES handling. After this change,
the CONFFILES can take the same form as FILES. That means, we don't
have to list a bunch of files for CONFFILES. It will just be expanded
like the FILES variable.
We don't assume default value for CONFFILES in OE. But distro vendors could
provide a default value for CONFFILES in their distro configuration file
like below.
CONFFILES = "${sysconfdir}"
In this way, files under /etc are treated as configuration files by
default. Of course, setting CONFFILES in recipes take precedence over
the CONFFILES. For example, if the recipe author decides that package A
should only treat files under ${sysconfdir}/default/ as config files,
he/she can write like this.
CONFFILES_A = "${sysconfdir}/default"
[YOCTO #5200]
(From OE-Core rev: 0d446ef0e5bbca7058eec7259e34f2a1637dfab1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you disable bluez but have dbus enabled, the build would fail. This patch
fixes the issue so that bluez5 based builds work.
(From OE-Core rev: 1324839b2be97c19e0a1fbd6ec8d3357731e5973)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add quotes around pkged_lic so that it works correctly with spaces
* fixes following error:
run.license_create_manifest.50601: 193: [: GPLv2: unexpected operator
(From OE-Core rev: 2bb8b2abb689d91b7b7e28e6bd528747bde94dd2)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If /etc/login.defs is treated as a configuration file, then we would meet
errors at do_rootfs time telling us that useradd/groupadd cannot execute
correctly.
This is because the dpkg handles config file specially, the login.defs
is temporarily renamed as login.defs.dpkg-new.
How ubuntu deals the user/group adding problem? They do it at postinst of the
package. And, the postinst script of a package would possibly do `chown' of
its files or directories.
The above strategy is not suitable for OE. Because we do chown in do_install
and add user/group in preinst scripts of the packages.
That's why we need this patch so that do_rootfs don't fail.
(From OE-Core rev: d98e5ec575f542b3afaabd96b07ae9a21e1c22f4)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Cristian Iorga
Richard Purdie
Chong Lu
Khem Raj
Robert Yang
Martin Jansa
Fathi Boudra
Richard Tollerton
Ben Shelton
Ross Burton
Nathan Rossi
Bruce Ashfield
Dan McGregor
Saul Wold
Brendan Le Foll
Chen Qi
Lucian Musat