The "-c" doesn't work in command "gzip file -c", need use "gzip -c file"
(From OE-Core rev: ee152cb5f83c76d81e199dbb7861712a3797f400)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From the origin commit message:
Regression from 2.4.2 was causing noticable slow-down in builds
that call libtool many times.
* build-aux/ltmain.in (func_help): Override func_help() from
gl/build-aux/options-parser to only run automake --version and
autoconf --version when libtool --help is executed on the command
line.
(From OE-Core rev: 9fd23c9ac03143b578559bb79995f2655c81ccc8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 1f53edeaf9.
There is a better fix on upstream, will backport it.
(From OE-Core rev: 600c9bb271a47674876b029a6a58ffac08add8ed)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fixes to GATT service discovery & probing
- Fix for bearer selection with dual-mode devices
- Fix potential crash when removing devices
- Fix issue with incomplete names in EIR data
- Fix parsing GATT name characteristics
- Fix AVCTP long press & key repetition handling
- Fixes for GATT notification handling
hex2hcd graduated to installed tool; two new noinst tools
See: http://www.bluez.org/release-of-bluez-5-28/
(From OE-Core rev: c8da28df187b22f1260b0f806854e8c357bccde4)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fix issue with PIN retry handling;
- Fix issue with HFP and multiple calls;
- Add support for Distracted Driving Reduction;
- Add support for available technologies property;
- Add support for Telit location reporting driver;
- Add support for u-blox SARA-U270 modems;
- Add support for Quectel UC15 modems.
(From OE-Core rev: b3e7ecc75f5a2b0cf6dde03fb7b2972e89457c0d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust the patch since it was partially applied upstream (in
a different form) but not completely since the ppc specific
part was not applied.
(From OE-Core rev: d397ba39e6a5a7d42641d489917033c779816a1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the new items to the validitems list, this is fully tested, initial testing
had been done with a local change that did not make the original commit request
[YOCTO #7308]
(From OE-Core rev: 6e48bc5fbd834f19bdcac17007d27a750cc5f331)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${PN} generally should be empty as every file the GStreamer packages ship is
owned by a particular plugin or library, so enforce this behaviour by unsetting
FILES_${PN}.
(From OE-Core rev: 4ea74059981bb4f22c55c75d9d9291f83227d609)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The equaliser presets were packaged into ${PN} which was rarely installed, so
move the files to the right subpackage.
(From OE-Core rev: 929566a5f9c53ee08fc27925dc4a3f1bd4b0021e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The equaliser presets were packaged into ${PN} which was rarely installed, so
move the files to the right subpackage.
(From OE-Core rev: 91811bd26740a583b5111e4754e1d462793ca30c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The libgsttag library has a data file that was packaged in
gstreamer1.0-plugins-base, so was never actually installed.
(From OE-Core rev: 01977ba4adb30a403cbbd43142a1edc38b2bc429)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Users often install the main package thinking it will bring in
all of the individual plugin packages, not realising that the
-meta package exists. Since the main package isn't currently
used for anything else, it would make more sense to just make
installing the main package install all of the plugins.
To do this in a manner that doesn't break any upgrade paths,
just add a dependency from the main package on the -meta
package for all of the gstreamer plugin recipes.
Fixes [YOCTO #5589].
(From OE-Core rev: 8e1009a3b128c9a00c183f89f98d9458f21cf6c0)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test each of the subcommands that this utility provides.
(From OE-Core rev: 725526139debf12d115fada6bd465a297e169080)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use argparse instead of optparse for standardised help output, options
and a much cleaner code structure
* Look up pkgdata directory automatically so the user doesn't have to
specify it
* Use standard logging
NOTE: this does mean a slight change in syntax - if you do want to
specify the pkgdata directory (usually only necessary if you're calling
it from within the build process) you need to use the parameter -p (or
--pkgdata-dir) and specify this before the command, not after it.
Examples:
oe-pkgdata-util find-path /sbin/mke2fs
oe-pkgdata-util lookup-recipe libelf1
oe-pkgdata-util read-value PKGSIZE libc6
oe-pkgdata-util -p /home/user/oe/build/tmp/sysroots/qemux86-64/pkgdata read-value PKGSIZE libc6
(From OE-Core rev: 04dc571ac7c26f0dcf1a1fcd466482e22519998d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trying to use git w/o tab completion is especially annoying if
you are used to using it elsewhere -- "whatchanged" is simply
too annoying to type out in full more than once.
(From OE-Core rev: 3c5285237dece0af594e74926e6f4f02ca81f715)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These could be created from scratch from git itself, but it
requires asciidoc, xsltproc, python bits and too much other
baggage. Since the git folks issue a tarball with the manpages
for each release, it is simpler to just go get that.
(From OE-Core rev: 9aba4bf2143c228d58aac06764f87ace5dd21d02)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the leading -e when using dash which does not use -e with echo
(From OE-Core rev: 105280d58f7be50e5aee6a33ef1aa89dd6485cbf)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add packageconfig for systemd-logind instead of hard disable in
EXTRA_OECONF this allows users to use packageconfig also add
dependency of dbus because systemd-logind require it for communicate
with systemd.
(From OE-Core rev: ce4035ee635decab83e08a8c77ae7b077a029096)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting "EDITOR=/bin/vi" breaks on non-busybox systems, as
vim will populate /usr/bin/vi instead, and you get stuff like:
op3:~/poky/meta-builder$ git commit -s
error: cannot run /bin/vi: No such file or directory
error: unable to start editor '/bin/vi'
Please supply the message using either -m or -F option.
op3:~/poky/meta-builder$ which vi
/usr/bin/vi
op3:~/poky/meta-builder$
Since we've already specified a proper path above in the profile,
we've no need to call out where in the path vi lives, and hence
this will work with busybox and a full vim install w/o busybox.
(From OE-Core rev: dcdaa651f3180e4561d7d08f56bfb29f35f2085f)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General consensus is that the new output format, with the all red
colour and one line per core is too fugly to be left as the default.
Use the configure option to switch it back to the sane default that
we've all become used to seeing for decades.
(From OE-Core rev: e6f57ae4cfad51107a8723cc42aec1ad2fc4c7da)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fixes an issue with DHCPv6 retransmission timer
calculation that causes system load to jump to 100%;
- All WiFi P2P issues encountered with Miracast have been addressed;
- ConnMan no longer hands off foreground autoscanning to
wpa_supplicant as it causes issues when finding hidden WiFi networks;
Other changes and fixes include:
- Several fixes for handling IPv6 contexts via oFono;
- Fix memory deallocation in exit code paths;
- Use OPEN auth_alg for wpa_supplicant open WiFi networks;
- A WiFi Access Point with unknown strength now has a proper
minimum value which translates to a service 'Strenght' property of 30;
- Fix byte order in DHCP server identifier;
- Properly cancel an ongoing service connect if the Agent exits.
(From OE-Core rev: fa718d0d2d74893bf8e532a132f8ede26552d2be)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the config section of the meta/conf/toasterconf.json file
to set the default project variables as in meta-yocto/conf/toasterconf.json
[YOCTO #7248]
(From OE-Core rev: eea9ada645ea5f17cf2e0f2a89a790c26ad27e9d)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per the Mesa 10.2 release notes, "--with-llvm-shared-libs"
has been renamed to "--enable-llvm-shared-libs".
http://www.mesa3d.org/relnotes/10.2.html
(From OE-Core rev: 34fe51e9b381e99d664a7e567a3267bcee991084)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add build and runtime dependencies for PACKAGECONFIG[xen]
* Add xen as a default PACKAGECONFIG option when it is part of
DISTRO_FEATURES
(From OE-Core rev: d3c82cd6019ad43af489fdc518a3f8a9f31f6777)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREV to import the following kern-tools patch:
kgit-meta: always clear series file on branch transitions
This was triggered by the patch optimization changes, that no longer
run do_patch if a leaf/final branch is not being processed.
Without this change, invalid patches, or already applied patches in
an existig series file will be re-used which leads to missing files,
or patch errors.
(From OE-Core rev: 762cf3beea5ff374e2ddf491e541f07129443af3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qmake_base class generates internal qt.conf for build with hardcoded
qt4 target paths. This is ok for qt4-x11 as this is the default
$QT_DIR_NAME, but it is wrong for qt4-embedded, because qtopia is its
default directory.
(From OE-Core rev: f4b8c0faa1cebda2a2742f8e4d622dcd024428e9)
Signed-off-by: Tomas Novotny <tomas.novotny@tbs-biometrics.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Update gst-fluendo-mpegdemux recipe from 0.10.72 to 0.10.85.
* Provide a more descriptive SUMMARY.
* Fix broken link in parent file gst-fluendo.inc.
(From OE-Core rev: 6e390315b72a1c95d7f6e32a4b013f619f71e26b)
Signed-off-by: Marco Trillo <martri@arantia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script looks for any warn|Warn pattern in the log. However,
it may happen that the warn|Warn pattern appears as part of the name
of the objects described in the NOTE lines of the log. Thus, to avoid
false positives, ignore the line if it contains the word "NOTE:"
(From OE-Core rev: 0387d0957909a9977efd8b2008e4d1c6d81ceb2a)
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dhclient will fail to get an IP address if run inside a guest when traffic is
flowing over a virtual network interface. The user will see the error
message:
5 bad udp checksums in 5 packets
No DHCPOFFERS received.
Unable to obtain a lease on first try. Exiting.
Failed to bring up eth0.
This is because Linux only uses partial checksums for packets that go over
virtual network interfaces and dhclient does not like this.
See linux kernel commit 78ea85f17b15390e30d8b47488ec7b6cf0790663
("net: skbuff: improve comment on checksumming")
An application can detect this behaviour by checking for the
TP_STATUS_CSUMNOTREADY flag in the tp_status field.
See linux kernel commit 8dc4194474159660d7f37c495e3fc3f10d0db8cc
("Add optional checksum computation for recvmsg")
An extra parameter is added to decode_udp_ip_header() in dhclient to indicate
whether or not dhclient should ignore partial checksums. This is used
when the TP_STATUS_CSUMNOTREADY bit is set by the guest kernel.
This fix has been included in Fedora and Ubuntu, however it has not yet been
accepted by ISC upstream. Likely because it is specific to behaviour in Linux
and other UNIX variants do not seem to be affected.
The patch was imported from the dhcp source RPM in Fedora 21
(http://pkgs.fedoraproject.org/cgit/dhcp.git/tree/dhcp-xen-checksum.patch?h=f21)
Originally contributed to fedora-cvs-commit by David Cantrell on Jan 30 2007
(https://www.redhat.com/archives/fedora-cvs-commits/2007-January/msg01442.html)
Submitted to dhcp-bugs@isc.org - [ISC-Bugs #22806] - by Michael S. Tsirkin
(http://comments.gmane.org/gmane.comp.emulators.kvm.devel/65236)
(https://lists.isc.org/pipermail/dhcp-hackers/2010-April/001835.html)
Upstream-Status: Submitted [dhcp-bugs@isc.org]
(From OE-Core rev: 99b598927b7a3837621d9e83e69b3b4fd83afed1)
Signed-off-by: Rob Woolley <rob.woolley@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Installing /usr/lib/gcc/* means we'd have two copies, one from gcc-cross
and one from here. These can confuse gcc cross where includes use #include_next
and builds track file dependencies (e.g. perl and its makedepends code).
For determinism we don't install this to the sysroot, ever and rely on the
copy from gcc-cross.
[YOCTO #7287]
(From OE-Core rev: 15b3324b769dc92e1b0d4b9da9fbfccbc8dde9dd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a siteinfo enabled tasks re-executes at the wrong moment whilst something else is
in do_configure, the _config files can be removed which upsets autoconf and
causes build failures.
Use the same approach as we do for dealing with the aclocal files. We already
parse the manifests so look out any *_config files and if so, copy them, then
reference the copy from siteinfo instead. This has the advantage of also being
more deterministic.
[YOCTO #7101]
(From OE-Core rev: c8b7aad133c3e3319345d50f85a91cbd5116f842)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cut and paste the pieces of build-aux/options-parser inline into the main
ltmain.sh code. This removes a performance degradation caused by the
repeated calls to func_quote_for_eval, the mechanism funclib uses
to construct the functions used for option parsing.
(From OE-Core rev: 6bf5cbbcac80ee818cc932d69227e70e41ce02d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The merge of the 3.14 -stable series triggered a build failure in the
32 bit mips builds.
Updating the SRCREVs to import the fix for the issue.
(From OE-Core rev: 234b4feef24ffe0cea9b6d88d9c51a05ee63db9e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREV for the following commits:
4822d22b65c2 kgit-meta: dont run kgit-s2q for non-leaf nodes
3e3de1b9cdec createme: remove meta branch checks
With these, we save 10 seconds on the average patch phase, and
significantly more if very long patch queues are used.
(From OE-Core rev: 04e600d933878f3d104cf734d437e6baffb983d8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To fix build issues against the v3.19 kernel, we can safely update to
the lttng 2.6 stable branches.
This allows us to drop two backported patches that are already part of
this update.
(From OE-Core rev: 76668418a63d4c0618c63bd9d13970df35e736eb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the following commits to add basic octeon III support to the
3.14 linux-yocto kernel:
1e0bbd1dd68e MIPS:OCTEON: More OCTEONIII support
f51a5843ee2d MIPS: Octeon: CVMSEG LM loads may cause dcache parity errors
58bcba842781 MIPS: Octeon: Implement the core-16057 workaround
ba5a219685e8 MIPS Override assembler ISA for kernel FPU instruction.
7759a0511965 MIPS donot build fast TLB refill handler with 32-bit kernels.
3f51e46ff641 MIPS Add minimal support for OCTEON3 to c-r4k.c
bbde024d903a MIPS Add function get ebase cpunum
9f18310679cb MIPS OCTEON Enable use of FPU
d24496ee8fc8 MIPS OCTEON Add OCTEON3 to get cpu type
(From OE-Core rev: 451142572f156ff0e88943931b924bfb0d9c30ce)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest korg stable version.
(From OE-Core rev: 4d342c2531bbb33c9101dcd7a669a620c8cf6917)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating to the latest korg -stable release for 3.14.
(From OE-Core rev: a6a64ee87182c6fa62117e68fafc4ec25ceefc0b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When doing kernel development testing, we want all the modules that were
built to be installed on the target.
(From OE-Core rev: 440b827c7953c59a85e3a93b88953cd33a530a07)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Refreshed installtests.patch
* Removed --enable-freedreno-experimental-api, since it is now enabled by
default upstream
Tested on Snapdragon 600 with freedreno and X11.
(From OE-Core rev: 9ab2d19d4c320cc37f71bba25caa7585caf9679e)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its do_compile would be failed once our autoconf-naitve is built:
| /path/to/m4-native/1.4.9-r2/m4-1.4.9/missing: line 54: aclocal-1.10: command not found
| WARNING: `aclocal-1.10' is missing on your system. You should only need it if
| you modified `acinclude.m4' or `configure.ac'. You might want
| to install the `Automake' and `Perl' packages. Grab them from
Also:
| /path/to/m4-native/1.4.9-r2/m4-1.4.9/missing: line 54: automake-1.10: command not found
We don't need keep a native GPLv2 recipe, so remove it.
(From OE-Core rev: 0d08fcdf495b5cdd2f51a7b379458dbf794b14af)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following packages will fail to build once we build bion-native 2.3:
libnl
iproute2
libxkbcommon
lttng-tools
gstreamer1.0
babeltrace
(From OE-Core rev: 2dc378e60e3594a57eddf470b61c1a0b79d7daff)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ERROR: The recipe coreutils-native is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
tmp/sysroots/x86_64-linux/bin/kill
Matched in manifest-x86_64-util-linux-native.populate_sysroot
We have 8.23, so disable it rather than fix.
(From OE-Core rev: da6fbea919bd460a30423b16c48b79047d6c6030)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: e2546c26acaf8fc47114398e3c4a15d17f0f07fb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a rxvt-unicode.inc for rxvt-unicode_9.20.bb and rxvt-unicode_9.21.bb
* Fix unknown-configure-option:
WARNING: QA Issue: rxvt-unicode: configure was passed unrecognised options: --enable-menubar --enable-cursor-blink --enable-shared --disable-strings --enable-xgetdefault [unknown-configure-option]
* Fix build-deps: (add a PACKAGECONFIG)
WARNING: QA Issue: rxvt-unicode rdepends on startup-notification, but it isn't a build dependency? [build-deps]
(From OE-Core rev: 3033c7dda12c448974c51e48a0813b642f19f35d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: QA Issue: tar: configure was passed unrecognised options: --without-posix-acls [unknown-configure-option]
tar 1.17 doesn't support --without-posix-acls, move it from tar.inc to
tar_1.28.bb to fix the problem.
(From OE-Core rev: faf469f9b5fbf794311d83db26cdf7f1042785c0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Let gzip_1.3.12.bb and gzip_1.6.bb use gzip.inc to remove duplicated
code.
* Fixed for gzip_1.3.12.bb:
WARNING: QA Issue: gzip requires /bin/bash, but no providers in its RDEPENDS [file-rdeps]
* Remove native extend from gzip_1.3.12.bb, keep gzip_1.6.bb's.
(From OE-Core rev: f3edae1a8cd8ac1b2ddb5f771a99cbb2c28bb529)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: QA Issue: patch: configure was passed unrecognised options: --disable-xattr [unknown-configure-option]
The patch 2.5.9 doesn't support --disable-xattr, there are already
PACKAGECONFIG and PACKAGECONFIG[attr] in patch_2.7.1.bb, so remove them from
patch.inc to fix the problem.
(From OE-Core rev: 7d10af1954aa4f27e3f32b7371a1f2454344bb5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: QA Issue: m4: configure was passed unrecognised options: --without-libsigsegv-prefix [unknown-configure-option]
The m4 1.4.9 doesn't support --without-libsigsegv-prefix, so move it from m4.inc
to m4-1.4.17.inc.
(From OE-Core rev: 4546f7c141e0ba0232593f1f9df588da7fe44ce9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The findutils_4.2.31.bb can't use the SRC_URI in findutils.inc (but
findutils_4.5.14.bb can use it), use the right SRC_URI to fix it.
(From OE-Core rev: 243e6d1380d376d1669c0ffa477027c1bec7f74a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upstream has moved tarball to "old" dir.
(From OE-Core rev: 22c5aa534943b6f6e801da2cf33b66b739c0e22e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't work:
| checking whether to include DRI1 support... no
| configure: error: DRI1 requested but prerequisites not found
And there is a xf86-video-intel_2.99.917.bb which is MIT-X.
(From OE-Core rev: b2feaf0d542047b28abaf946bf7ad6fcdcaf6784)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 0.9.1:
ERROR: matchbox-wm: Recipe file does not have license file information (LIC_FILES_CHKSUM)
ERROR: Licensing Error: LIC_FILES_CHKSUM does not match, please fix
For 2.0:
| /path/to/matchbox-desktop-2.0/configure: line 2488: syntax error near unexpected token `build_old_libs,'
| /path/to/matchbox-desktop-2.0/configure: line 2488: ` _LT_DECL(build_old_libs, enable_static, 0,'
And there is a matchbox-desktop_git.bb which is "GPLv2+ & LGPLv2+", so remove them.
(From OE-Core rev: 7b781f1532a64973175cffced1eac4cd8bba3d0c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't work:
ERROR: matchbox-wm: Recipe file does not have license file information (LIC_FILES_CHKSUM)
ERROR: Licensing Error: LIC_FILES_CHKSUM does not match, please fix
And there is a matchbox-wm_git.bb, they have the same GPLv2+ license.
(From OE-Core rev: 5b74b2c129ded8d8d8e2843ff7b86e1053c81ba7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is the GPLv2+ version, the old SRC_URI is down, use fedoraproject's
repo. Its homepage is also down, but I can't find a new one for it.
(From OE-Core rev: 41c4bad11e4a8ebc13f2e4a9712265f3946bf0a8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'dot.profile' supplied by base-files calls 'mesg'. For simple
images using busybox e.g. core-image-minimal, this utility should be
available to avoid errors on login:
-sh: mesg: command not found
Provide mesg with busybox.
(From OE-Core rev: 7ec6f8290910c242d6e58110c30b3ffbdff274e4)
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new terminal type that makes a new window in the running tmux
session instead of splitting the window. 80x25 is not enough to run
menuconfig inside a split window, so add the option to create a new
window instead.
Use the new window option by default when the split window would be
less than 19 lines high.
(From OE-Core rev: d7ef9e49b1c687279f6eb2c7abc32ff915714177)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If maillock.h is found, a dependency on liblockfile will be created.
liblockfile is in meta-oe, so we don't want that in an oe-core recipe.
(From OE-Core rev: b2cee9b9f08dff41e46e227b1ffa5e46e98faa89)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The named release was still using the -dev git repo which did not contain
the SRCREV referenced in the numbered/named version.
(From OE-Core rev: b4f2f39ce0f4690ed51d14d1034b9f5e21c0f5a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that changing WARN_QA and ERROR_QA results in do_configure's QA
postfunc re-executing, so changing a QA test results in a complete rebuild.
This is just too much and the lesser evil of needing to do a full rebuild to
verify changed QA flags is preferable to an enforced full rebuild.
This reverts commit daecfc3438122b5d146a59a5053e57006d55ccc4.
(From OE-Core rev: 4c5895da16de6f00148a0755b421f07223083d09)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Checks in FILES and pkg_* variables, solves common mistake of
using ${D} instead of $D and warns the user accordingly.
[YOCTO #6642]
(From OE-Core rev: e3ea62b370f69d2435e76f6e444f5d3a3b25eb17)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When specify a target sdk dir that contains default install dir as
subdir,
target_sdk_dir=/opt/poky/$version/
custom_target_sdk_dir=/opt/poky/$version/some
The target_sdk_dir variable in environment-setup file is replaced twice
causes to point to wrong PATH.
In order to fix filter environment-setup file in second replacement.
[YOCTO #7032]
(From OE-Core rev: 02ecaa69abe97fe2f01cd609e0e59933c0f9ddbf)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
flags for EGL and GBM Gallium had been removed in 10.4,
so remove these flags, files or packages.
(From OE-Core rev: ba079975fa984f53fde5b4e8131d0f3877323e6c)
Signed-off-by: Pengyu Ma <pengyu.ma@windriver.com>
Tested-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-introduce
https://sourceware.org/git/?p=glibc.git;a=commit;h=fdbe8eae2b9aed74dabba1b0a189c5d7d61bf032
This patch was overzealously removed during option groups forward port
Change-Id: I8dd01902ae8e5ee8b5c6fc9dc39c7216952dca51
(From OE-Core rev: 24f02c8d1313a423cf219270a9aa55bccbe1893c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUILDNAME is set by cooker as a string of current time. Letting do_rootfs
task depend on this variable gets us no benefit. Besides, letting do_rootfs
task depend on this variable will cause us trouble when executing
`bitbake -S none core-image-minimal'. With current code, this command
gives us error complaining about the different bashhash of do_rootfs task.
(From OE-Core rev: eb6305d03723527830976c3a4ce2342a0e09eefc)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split the debug-tweaks into a more fine tunable set of IMAGE_FEATURES
which activate the component functions.
Clean-up image-core and image bbclass by having the ROOTFS_POSTPROCESS_COMMANDs
in in one place for the debug-tweaks related functions
[YOCTO #5344]
(From OE-Core rev: e52d8281eb98dbade2d82451fa9788285121437e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase default-sysroot patch
Remove backported Mozilla certdata patch
License has not changed, just wording.
(From OE-Core rev: 33222af134c465791ed84eccd61bbc2b69ad81f1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Strictly speaking not all of these characters are operators, so reword
the message to describe them as separators. Also use the standard
"recipename: message" format.
(From OE-Core rev: 9e5da3e83f2a5d43620e07a31728b7427329d8f4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ">" should be ">>".
We had got something like the following in pcap-config:
echo '--should-not-have-used-/usr/bin/pcap-config'
exit 1
(Lacks of #!/bin/sh)
(From OE-Core rev: d4adf9ac1b8318d4eb3f1c8dd82bbf04c6908eb5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is not needed any more since sed-native had been dropped.
(From OE-Core rev: 289e433f8d0e4b5a710094e3a3c0d8e77e82e50d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
drd/tests/boost_thread.cpp:5:38: fatal error: boost/thread/condition.hpp: No such file or directory
#include <boost/thread/condition.hpp>
(From OE-Core rev: 5650ece64f55044a8fd7fa3fce692dfb17006f8f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds 'nativesdk' in the BBCLASSEXTEND.
Building apr-util for the SDK requires that some paths in the rules.mk
file are fixed to point to the actual enviroment. These include pointing
the apr configuration variables to the actual apr builddir and
correcting the name of the libtool.
(From OE-Core rev: 4595e4832418afc651300c88ad2b835f0aedd8bc)
Signed-off-by: Timo Mueller <timo.mueller@bmw-carit.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds support to build multiple U-Boot configs for a machine; this
is useful when we have support for different media boots which require
different U-Boot configuration (e.g: eMMC and NAND).
Below there's an usage example:
,----[ i.MX6Q SABRE AUTO based example ]
| UBOOT_CONFIG ??= "sd eimnor nand spinor"
| UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard"
| UBOOT_CONFIG[eimnor] = "mx6qsabreauto_eimnor_config"
| UBOOT_CONFIG[nand] = "mx6qsabreauto_nand_config,ubifs"
| UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config"
`----
(From OE-Core rev: be997c70e4dec101786978b3ab5e49a1be87a85d)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The libtool would be very slow if run "automake/autoconf --version", for
example, when compile xz-native (make -j1, only compile, no confiure or
install):
before patched: 19s
after patched: 11s
Use plain text to instead of running them.
NOTE: it is still a little slower than libtool 2.4.2 when compile
xz-native because of other parts:
make -j1: about 2s slower
make -j32: about 0.4s slower
If we run to do_install:
(PARALLEL_MAKE = "-j32")
libtool 2.4.2:
$ bitbake xz-native -cinstall && bitbake xz-native -ccleansstate && time bitbake xz-native -cinstall
real 0m21.092s
user 0m28.292s
sys 0m3.932s
libtool 2.4.5:
$ bitbake xz-native -cinstall && bitbake xz-native -ccleansstate && time bitbake xz-native -cinstall
real 0m21.380s
user 0m31.140s
sys 0m4.068s
About 0.3s, slightly different.
But when using /bin/bash as CONFIG_SHELL, the new libtool would be much slower:
real 0m23.106s
user 0m44.044s
sys 0m4.280s
About 2s slower, for the big package like cairo, it is more slower (about 6s),
unfortunately, /bin/bash is most default CONFIG_SHELL for the recipes since
configure checks first check bash.
(From OE-Core rev: eb9d896db2fc67bac8efd258744d06fbbee87f06)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe wraps package and package feed verification keys into a package,
making the management and deployment of verification keys much easier. Comments
on how to select keys for inclusion in this package are provided in the recipe
file.
(From OE-Core rev: 2104111edc85d057eb4fadecd007f5c592803da6)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The improvements to opkg-key made for v0.3.0 are backported. The rest of v0.3.0
needs further testing and bugfixing prior to release, but the improvements to
opkg-key have been tested and work well.
(From OE-Core rev: c4bc41cb2dd679629184a3693dd6c8d964a24d27)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe was not usable as-is. A much better way of configuring package feeds
for opkg is provided by the distro-feed-config recipe in meta-oe.
(From OE-Core rev: 718d5c64069e7bc958f94daae2369fdefa4bafeb)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All non-arch-specific and non-distro-specific configuration is now kept in the
main 'opkg' recipe and package.
(From OE-Core rev: e8879cd1ec8914815c7a78f1d9b296b0e2b30fcf)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no benefit to having a separate .inc file when we only support one
version of opkg.
The .inc file had multiple do_install_append functions and several variables
were defined out of the usual order. This arrangement should be better.
(From OE-Core rev: ab3cc175649dbea6f434bb0f6ee1346f5f0e701a)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of having the source files 'opkg.conf.comments', 'dest' and 'src', we
simply have one 'opkg.conf' file containing all the necessary configuration.
This does mean that replacing 'src' in a bbappend to define distro-specific
package feeds is no longer supported, but these feed configurations should be
packaged separately from the rest of the opkg configuration anyway so that
things can be updated independently. The best recipe to use for managing feed
configs is currently distro-feed-config in the meta-oe layer.
(From OE-Core rev: f7c591df37493e8f3cde9c19bb0d1edc370eca1c)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name 'opkg-arch-config' is much more descriptive.
(From OE-Core rev: d0cb4fb3aab1d6041f88fa564e5d745629316ae2)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds 'nativesdk' in the BBCLASSEXTEND.
(From OE-Core rev: de17201509d16210ead076f0e11d30593d65df25)
Signed-off-by: Timo Mueller <timo.mueller@bmw-carit.de>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The unknown-configure-option check is generally useful and should be enabled by
default.
(From OE-Core rev: 2f1909a6a78dec943800a0e8a39f890c007165b7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing WARN_QA and ERROR_QA should cause do_package_qa to re-execute, so
removing them from the sstate hashes is harmful.
They were added back when sanity testing was part of packaging and this was the
lesser evil, compared to changing sanity tests causing a re-package of
everything.
(From OE-Core rev: daecfc3438122b5d146a59a5053e57006d55ccc4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe (say, wayland) has DEPENDS=wayland-native and BBCLASSEXTEND=native,
when built as wayland-native it has DEPENDS=wayland-native which results in a
circular dependency.
Typically this is resolved by having explicit DEPENDS_class-native statements
but as this is duplication which can lead to inconsistent dependencies,
automatically remove the circular dependency.
(From OE-Core rev: 3e9392c0965166462e0993d46f4cc2fb1832f1e5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix systemd-timesyncd assertion
when networkd is disabled then we now do not
create /run/systemd/netif/links but timesyncd needs it. So lets
manually create this file when networkd is disabled so timesyncd
can still function
When enabling systemd-timesyncd we need systemd-timesync user
Backport patches to enable timesyncd when resolved and networkd
are disabled
replace the resolv.conf symlinink patch with a proper backport
Change-Id: I53f1a53eec4e4a4dbdfb7e8cd155d544ee5d81ec
(From OE-Core rev: 2a675bc63b22724f12e6ed6ff58d0f1d1e0d3b29)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* there is some pending work to resolve this unnecessary x11
dependency, this can be reverted together with x11 dependency
removal
(From OE-Core rev: bc4d051c2fa56acb0479330b4342a39396de30d4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forces native RDEPENDS of xmlto-native to be built and installed
since those files are required when creating yocto-docs
if not found, they are downloaded from upstream everytime
significant time difference is achieved.
[YOCTO #7148]
(From OE-Core rev: 928d41cb7343c23f586a2a1a5e6f81569d9c261b)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the current code, if we use debian package backend and enable
multilib support, the do_rootfs process would always fail with error
messages like below.
E: Unable to locate package packagegroup-core-boot
This patch fixes the above problem.
(From OE-Core rev: d140d556ae30b6dbd0ffce8882c3e22b17050820)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase sshd_config and ssh_config with openssh upstream.
Check for the ed25519 key in the systemd keygen service.
(From OE-Core rev: 046dd5567d9de0596023846e7f0c6df7f01a9f5b)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix build issues due to libz being required but
is specified before use.
Change-Id: I1f26c8e656b330a4b5f1eeffee7ac13500fa98d0
(From OE-Core rev: c939b9cc5bd046261981dcaae6cae9d358ed7671)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When resolving a patch, a new process of gnome-terminal
is created for every patch to be resolved, it "waits"
for the previous one to end, instead of launching
multiple windows at the same time.
[YOCTO #7254]
(From OE-Core rev: b457e0b028418260aee25858b8af8938dd038fac)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows an image to skip the creation of kernel depmod
data. It is useful for creating an image that will run as a
container image inside a host with no knowledge of the parent's
kernel.
(From OE-Core rev: ca641aedff5f6bd155796ead02cb2eb871f8c17a)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
update to 3.3.12 to fix some bugs.
http://article.gmane.org/gmane.comp.encryption.gpg.gnutls.devel/7967
(From OE-Core rev: 894edb243a984654bb929bbbaf299d89167801f1)
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL http://kernel.org/pub/linux/utils/kernel/pcmcia/pcmciautils-018.tar.bz2, attempting MIRRORS if available
The pcmciautils-018.tar.bz2 is gone from kernel.org.
(From OE-Core rev: 315b22be7540c18d53477738647bf184ecdfb837)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL http://www.latencytop.org/download/latencytop-0.5.tar.gz, attempting MIRRORS if available
Its homepage is also down, but can't find a proper one atm.
(From OE-Core rev: 1f6a21b76210efa8d323014263d5656c61131803)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL ftp://ftp.suse.com/pub/people/kukuk/pax/pax-3.4.tar.bz2, attempting MIRRORS if available
(From OE-Core rev: 3fa94ef9685651b9fe812e122748ebac1cf66471)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL http://primates.ximian.com/~flucifredi/man/man-1.6g.tar.gz, attempting MIRRORS if available
Its HOMEPAGE is also down, but can't find one for it.
(From OE-Core rev: 787f735c4f66fc498d86b468c862ceed25ed80de)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL http://download.berlios.de/cwautomacros/cwautomacros-20110201.tar.bz2, attempting MIRRORS if available
(From OE-Core rev: bfc6f30ff39994ee468f471e6b41f46e7acc088f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL ftp://ftp.uni-erlangen.de/pub/Linux/LOCAL/dosfstools/dosfstools-2.11.src.tar.gz, attempting MIRRORS if available
And add a HOMEPAGE for it, there is no dosfstools 2.11 on its official
page (but 3.x).
(From OE-Core rev: cba73a598abc396fae4fb582be98fc04cb2a580f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: Failed to fetch URL ftp://ftp.debian.org/debian/pool/main/b/base-passwd/base-passwd_3.5.29.tar.gz, attempting MIRRORS if available
(From OE-Core rev: 9ac88e3a9ac36ed83f01ac21db57a3c01a24385e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old ones are invalid, fixed:
WARNING: Failed to fetch URL ftp://ftp.berlios.de/pub/cdrecord/alpha/cdrtools-3.01a20.tar.bz2, attempting MIRRORS if available
(From OE-Core rev: dd8c87987b2d228ec1c8b48d207767fb146ae0fd)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: QA Issue: perf rdepends on numactl, but it isn't a build dependency? [build-deps]
The numactl is in meta-oe.
(From OE-Core rev: 175d6b4e598f78dfa17c101a36a82c0951615b7a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: QA Issue: screen rdepends on libutempter, but it isn't a build dependency? [build-deps]
The libutempter is in meta-oe.
(From OE-Core rev: 9672cf6ea4e35ffa45b9d624b3822df31533db19)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An invalid value in IMAGE_FSTYPES was triggering a traceback. Add a
check and a reasonable error message instead.
(From OE-Core rev: f38c35b925d6eab0d5a41b8592b0eb8b0a3b7b72)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the rewrite of the image construction code in python a few
releases ago, we remove a couple of packages from the image as one of
the final steps when constructing the image (notably update-rc.d and
run-postinsts). However, because of the order of operations, these
packages are still listed both in the buildhistory
installed_package*.txt files and in the manifest file created next to
the image, which is wrong.
There were two possible solutions to this: (1) change the order such
that the uninstallation occurs before calling ROOTFS_POSTPROCESS_COMMAND
or (2) add another hook variable in such that we can have the
package list collection code run at the right time. Because it's
currently possible (but very much not recommended) to install additional
packages within ROOTFS_POSTPROCESS_COMMAND, which may have postinstall
scripts and thus require the packages we would otherwise uninstall if we
were to take option 1, option 2 is really the least likely to cause
problems. Therefore, add ROOTFS_POSTUNINSTALL_COMMAND and make the image
and buildhistory classes use it.
Fixes [YOCTO #6479].
(From OE-Core rev: b198a189228648057c3be7d068598f50841b3bf9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you add an item to EXTRA_IMAGE_FEATURES in your local.conf that is
not supported by image.bbclass itself (such as "tools-sdk" which is
implemented in core-image.bbclass), it can be somewhat annoying to have
the parse fall over if you have a recipe that inherits image.bbclass
only. Change the error from bb.fatal to skip the recipe instead so that
you only see the error when attempting to build the recipe, plus add a
bit of logic to report if the feature is coming in via
EXTRA_IMAGE_FEATURES.
Fixes [YOCTO #5023].
(From OE-Core rev: cbe9d2f748125aa2dffc829570d46f8dbc1781a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename it to _uninstall_unneeded.
(From OE-Core rev: cb217f442b8143d88112bebe4011051efbd905a3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the daisy (1.6) timeframe, when we rewrote the image construction in
Python, we neglected to reimplement the support for the little used and
undocumented variable MACHINE_POSTPROCESS_COMMAND, and apparently nobody
noticed. We have a better method for implementing machine-specific image
formats that is in wider use (i.e. add a custom class which implements
the new image type, add the class to IMAGE_CLASSES and the type to
IMAGE_FSTYPES), and we now also have wic. Thus it makes more sense to
just call this variable unsupported now and drop the sole remaining
reference to it.
(From OE-Core rev: 46fef857d6c4ac25d89b71b542b019d0ed068c19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a log data cannot be decoded to utf-8 or read then handle this
gracefully. This can happen if a log file contains binary or something
goes wrong with the file open process.
(From OE-Core rev: 787ffc5e12f1639aa5e0917bb23deced53a0478e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added back in the depths of history (around 2006 in OE-Classic)
when apparently the host sed couldn't always be relied upon. We now call
the host sed all over the place without this dependency and don't have
any problems. On the other hand, having it around can lead to races
where we're calling sed in one task and staging it to the sysroot in
another, the result being nasty failures compiling binutils for example.
Since it isn't needed, let's just drop it completely.
Fixes [YOCTO #7264].
(From OE-Core rev: 863a3966e1a200e7a15fbdbb8e04dce6e3f6c1a2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The newer btrfs-utils needs an empty file to build the filesystem in, so
create an empty file and use it for the mkfs to build the fs in.
[YOCTO #6804]
(From OE-Core rev: 224c24d8a8ea6230ed56ea61cdb86e78c5ec4311)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes affecting future time stamps
The Mexican state of Quintana Roo, represented by America/Cancun,
will shift from Central Time with DST to Eastern Time without DST
on 2015-02-01 at 02:00. (Thanks to Steffen Thorsen and Gwillim Law.)
Chile will not change clocks in April or thereafter; its new standard time
will be its old daylight saving time. This affects America/Santiago,
Pacific/Easter, and Antarctica/Palmer. (Thanks to Juan Correa.)
New leap second 2015-06-30 23:59:60 UTC as per IERS Bulletin C 49.
(Thanks to Tim Parenti.)
Changes affecting past time stamps
Iceland observed DST in 1919 and 1921, and its 1939 fallback
transition was Oct. 29, not Nov. 29. Remove incorrect data from
Shanks about time in Iceland between 1837 and 1908.
Some more zones have been turned into links, when they differed
from existing zones only for older time stamps. As usual,
these changes affect UTC offsets in pre-1970 time stamps only.
Their old contents have been moved to the 'backzone' file.
The affected zones are: Asia/Aden, Asia/Bahrain, Asia/Kuwait,
and Asia/Muscat.
(From OE-Core rev: 4ee327602a0cc3200b5d6490ef2f115768cff2f4)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes affecting code
tzalloc now scrubs time zone abbreviations compatibly with the way
that tzset always has, by replacing invalid bytes with '_' and by
shortening too-long abbreviations.
tzselect ports to POSIX awk implementations, no longer mishandles
POSIX TZ settings when GNU awk is used, and reports POSIX TZ
settings to the user. (Thanks to Stefan Kuhn.)
Changes affecting build procedure
'make check' now checks for links to links in the data.
One such link (for Africa/Asmera) has been fixed.
(Thanks to Stephen Colebourne for pointing out the problem.)
Changes affecting commentary
The leapseconds file commentary now mentions the expiration date.
(Problem reported by Martin Burnicki.)
Update Mexican Library of Congress URL.
(From OE-Core rev: ccc543570b96bb1f1efefd5ed79469da142cafd3)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build Appliance includes a more recent
version of poky, up to commit:
afe85485fe.
Fixes [YOCTO #7228].
(From OE-Core rev: 4d1cfbfde4be2b0f19f40fbf46f880b658afaeb8)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang
Peter A. Bigot
Cristian Iorga
Richard Purdie
Saul Wold
Ross Burton
Paul Eggleton
Paul Gortmaker
Ricardo Ribalda Delgado
Aníbal Limón
Denys Dmytriyenko
Belen Barros Pena
Andre McCurdy
Nathan Rossi
Bruce Ashfield
Armin Kuster
Tomas Novotny
Marco Trillo
Ricardo Neri
Rob Woolley
Andreas Müller
Nicolas Dechesne
Ash Charles
Dan McGregor
Alejandro Hernandez
Pengyu Ma
Khem Raj
Chen Qi
Timo Mueller
Chunrong Guo
Paul Barker
Jackie Huang
Rodrigo Chiossi
Martin Jansa
Bian Naimeng
Michael Wood
Sona Sarmadi
Armin Kuster