The concept of directdisk image is overhauled as we are now
having a initramfs that can flash the next image through USB.
The dedicated E1/IP images are rarely to never used and did
probably bit-rot. For the next time we provide such a system
we can simply (write a script to) install the additional feed.
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS was set to '-n' which means
"Exit with failure if lease cannot be immediately negotiated."
What we'd rather want is for udhcpc to continue to run until a lease can
finally obtain. Otherwise we have a race condition in case the DHCP
server is not reachable for a few seconds during system boot, and end up
having a system that is permanently without an IP address.
This fixes ORT#639
The line doesn't have the signalling type set yet. It will be set
_after_ the rsl connection is considered up. This is addressing
RSL Connection failures like:
<0001> oml.c:1026 Rx IPA RSL CONNECT IP=1.2.3.4 PORT=3003 STREAM=0x00
<000f> input/ipaccess.c:921 cannot create RSL BTS link: trx_nr (0) does not refer to a signalling link
<0001> oml.c:1030 Error in abis_open(RSL): -22
<0001> oml.c:341 Sending FOM NACK with cause Message cannot be performed.
Without inheriting pkgconfig the PKG_CHECK_MODULES macro can not
be expanded in dizzy. Fix it. While being there use "autotools"
for the pcu and not autotools_stage.
We have changed the strategy to support multiple BTS with a single
build but don't remove support from files that are used with Edison.
Linux 3.10 and systemd were not used with edison though. So we can
remove it. As the sysmobts-2050 extended the sysmobts-v2 build most
of the -sysmobts-2050 changes are not needed anyway.
Fix the build by using a newer version and change the PR to be
a proper version number. I havent' checked if upgrading is possible
but is not a big concern right now.
This variable doesn't exist on dora and will not break things.
Fixes:
ERROR: Please ensure module rtfifo is listed in KERNEL_MODULE_PROBECONF since module_conf_rtfifo is set
We are currently using 1.5 (dora). Copy the bbappends to the
yocto-dizzy directory and update the version numbers. For busybox
enable all features that were enabled between dora and origin/master.
For opkg_svn.bbapend. In dizzy there is a version attached to it.
This means we need to remove it from the yocto-shared directory
and keep it everywhere else.
WARNING: FILESEXTRAPATHS-variable, must always use _prepend (or _append)
type of assignment, and don't forget the colon.
Please assign it with the format of:
FILESEXTRAPATHS_append := ":${THISDIR}/Your_Files_Path" or
FILESEXTRAPATHS_prepend := "${THISDIR}/Your_Files_Path:"
in your bbappend file
Creating a new file in /etc/sysmocom/backup.d/ that ends with .backup
will be read during the backup and then be restored. This way we can
easily extend the files to backup.