On terminating the connection to the server, we were disabling SIGINT -
and this is executed on the UI side. I'm not sure whether the intention
here was to undo the SIGINT disabling we did in the server, and it was
just a mistake that it disabled rather than restored and it's run on the
wrong side, or whether we wanted to stop the user from breaking out of
the shutdown code - the commit message provides no clues either way.
Regardless, we do not want to permanently disable Ctrl+C here - it's
legitimate to terminate the connection to the server and then
re-establish it within the same process; at least currently, devtool
modify by virtue of using tinfoil in two separate parts of the code does
this, and the result of this disabling is that during the second tinfoil
usage we can potentially be parsing all recipes without the ability to
easily interrupt the process.
(Bitbake rev: 58c60a951229dcbd8253863fb24228d046c23f6e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you run the setVariable command to set variables then you end up
causing the basehash to not match the previously computed values, which
triggers error messages. These mismatches are expected, so add a means
of disabling them.
(Bitbake rev: 5a80c0e210f26526afbe8f266b7b1a9c03334967)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the client to set variables with the setVariable command and have
those changes take effect when running tasks. This is accomplished by
collecting changes made by setVariable separately and pass these to the
worker so it can be applied on top of the datastore it creates.
(Bitbake rev: 69a3cd790da35c3898a8f50c284ad1a4677682a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The COW object used within VariableHistory can't be serialised itself,
but we can convert it to a dict when serializing and then back when
deserialising. This finally allows DataSmart objects to be serialized.
NOTE: "serialisation" here means pickling, not over XMLRPC or any other
transport.
(Bitbake rev: bbbb2a53d5decf3b613a92c4ff77c84bfc5d4903)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want to use this function/command internally, we don't want this
warning shown.
(Bitbake rev: 5cfbb60833e7b12d698c1c2970c17ccf2a4971bf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you're expanding a value that refers to the value of a variable in
python code, we need to ensure that the datastore that gets used to get
the value of that variable is the client-side datastore and not just the
part of it that's on the server side. For example, suppose you are in
client code doing the following:
d.setVar('HELLO', 'there')
result = d.expand('${@d.getVar("HELLO", True)}')
result should be "there" but if the client part wasn't taken into
account, it would be whatever value HELLO had in the server portion of
the datastore (if any).
(Bitbake rev: cbc22a0a9aadc8606b927dbac0f1407ec2736b35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not really practical for us to parse recipes on the client side, we
need to do it on the server because that's where we have the full python
environment (including any "pure" python functions defined in classes).
Thus, add some functions to tinfoil do this including a few shortcut
functions.
(Bitbake rev: 8f635815d191c9d848a92d51fdbf5e9fd3da1727)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the purposes of server-side parsing and expansion allowing for
client-side use of the datastore, we need a means of sending a datastore
from the client back to the server, where the datastore probably
consists of a remote (server-side) original plus some client-side
modifications. To do this we need to take care of a couple of things:
1) xmlrpc can't handle nested dicts, so if you enable memres and simply
try passing a serialised datastore then things break. Instead of
serialising the entire datastore, just take the naive option of
transferring the internal dict alone (as a list of tuples) for now.
2) Change the TinfoilDataStoreConnector object into simply the handle
(number) when transmitting; it gets substituted with the real
datastore when the server receives it.
(Bitbake rev: 784d2f1a024efe632fc9049ce5b78692d419d938)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite tinfoil as a wrapper around the UI, instead of the earlier
approach of starting up just enough of cooker to do what we want. This
has several advantages:
* It now works when bitbake is memory-resident instead of failing with
"ERROR: Only one copy of bitbake should be run against a build
directory".
* We can now connect an actual UI, thus you get things like the recipe
parsing / cache loading progress bar and parse error handling for free
* We can now handle events generated by the server if we wish to do so
* We can potentially extend this to do more stuff, e.g. actually running
build operations - this needs to be made more practical before we can
use it though (since you effectively have to become the UI yourself
for this at the moment.)
The downside is that tinfoil no longer has direct access to cooker, the
global datastore, or the cache. To mitigate this I have extended
data_smart to provide remote access capability for the datastore, and
created "fake" cooker and cooker.recipecache / cooker.collection adapter
objects in order to avoid breaking too many tinfoil-using scripts that
might be out there (we've never officially documented tinfoil or
BitBake's internal code, but we can still make accommodations where
practical). I've at least gone far enough to support all of the
utilities that use tinfoil in OE-Core with some changes, but I know
there are scripts such as Chris Larson's "bb" out there that do make
other calls into BitBake code that I'm not currently providing access to
through the adapters.
Part of the fix for [YOCTO #5470].
(Bitbake rev: 3bbf8d611c859f74d563778115677a04f5c4ab43)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In memory resident mode we don't really want to actually shut down since
it's only the client going away.
(Bitbake rev: 74db369c46043116359101cab70486afd82372c0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows you to maintain a local reference to a remote datastore. The
actual implementation of the remote connection is delegated to a
connector object that the caller must define and supply. There is
support for getting variable values and expanding python references
(i.e. ${@...} remotely, however setting variables remotely is not
supported - any variable setting is done locally as if the datastore
were a copy (which it kind of is).
Loosely based on an earlier prototype implementation by Qing He.
(Bitbake rev: a3edc3eefa2d03c4ad5d12187b32fa4dc495082a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you send back a string here you get "TypeError: 'str' does not
support the buffer interface" errors in bitbake-cookerdaemon.log and
"IncompleteRead(0 bytes read, 22 more expected)" errors on the client
side.
(Bitbake rev: 0d659a7dfe5fb096f8aa4380320f9e2a464b3cb5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're in observe-only mode then we cannot run commands that would
affect the server's state, including getSetVariable, so prevent that
from being called in observe-only mode.
(Bitbake rev: 2c5a8661430edebff67ab4a108995033d182b5d6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow you to specify -q / --quiet more than once to reduce the messages
even further. It will now operate as follows:
Level Option Result
----- ------ ----------------------------------------
0 Print usual output
1 -q Only show progress and warnings or above
2 -qq Only show warnings or above
3+ -qqq Only show errors
(Bitbake rev: 6cf2582e17c28ca04f5cfb59858c4a9778c700d4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no "datasmart" member, only dataroot. This dates back to the
original implementation of variable history support - it's surprising we
haven't noticed the issue until now, but I guess it's rare to change a
copy of a datastore in a manner which using the old reference would
cause an issue.
(Bitbake rev: febd5534b07edfdef15cedb0578730c582c7373f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If many files change and the inotify queue overflows, rather than print
a traceback, invalidate the caches and warn the user.
[YOCTO #10676]
(Bitbake rev: 058f8517c041b80e8b591ad7d34a68281b2d03fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The processing of the "do_" prefix to tasks is currently inconsistent
and has resulted in "bitbake world -g" being broken as task prefixes
don't get handled correctly.
Make the "do_" task prefix handling consistent through various codepaths.
[YOCTO #10651]
(Bitbake rev: 3d7186353e804c9410096c408bc337a98c8b33fe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now have code in OE that needs BB_TASKDEPDATA for setscene tasks. Therefore
generate and send this data. In this case its a "pre collapsed" tree
but that is fine for the use cases in question.
(Bitbake rev: 38b857d086af43af6ea3aa60d3876a2c9b225401)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to know the task hash in code using TASKDEPDATA so add this
data to the data structure. The recipe specific sysroots in OE
need this data.
(Bitbake rev: 758867e8dc74283bb1f031e158ec54cefdd5c2a6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We assume that the value taken by variable v can be string,
integer or any type which can be marshalled by xmlrpc. This
change would help us to convert the non marshallable types
to string. So that we don't get exception from xmlrpc.
[YOCTO #10740]
(Bitbake rev: efb0e47479b3526bc047112f7200087c5844bba4)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parameters to Python string formatting need to be inside a tuple.
(Bitbake rev: 3c82af11b89cf251c3e56725a1eed2d3f4bd835b)
Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current disk usage is interesting and may be worth logging over
time as part of the build statistics. Instead of re-implementing the
code and the configuration option (BB_DISKMON_DIRS), the information
gathered by monitordisk.py is made available to buildstats.bbclass via
a new event.
This has pros and cons:
- there is already a useful default configuration for "interesting" directories
- no code duplication
- on the other hand, users cannot configure recording separately from
monitoring (probably not that important)
(Bitbake rev: f065ac17d0031dca6309ddbff18c8792630de865)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to encode and decode the hash key as a single string,
a tuple works just fine. Iterating over entries can be written more
concisely.
Entries in the stat results are integers, not floating point values.
(Bitbake rev: 3c943e989964382c0b819d92de26a0c914ebed33)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hooking the disk monitor into the regular heatbeat event instead
of the runqueue solves two problems:
- When there is just one long running task which fills up the disk,
the previous approach did not notice that until after the completion
of the task because _execute_runqueue() only gets called on task
state changes. As a result, aborting a build did not work in this
case.
- When there are many short-lived tasks, disk space was getting
checked very frequently. When the storage that is getting checked
is on an NFS server, that can lead to noticable traffic to the
server.
(Bitbake rev: 4547eea26803a9cd355d8b045197bcbdbb36a9ad)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intended usage is for recording current system statistics from
/proc in buildstats.bbclass during a build and for improving the
BB_DISKMON_DIRS implementation.
All other existing hooks are less suitable because they trigger at
unpredictable rates: too often can be handled by doing rate-limiting
in the event handler, but not often enough (for example, when there is
only one long-running task) cannot because the handler does not get
called at all.
The implementation of the new heartbeat event hooks into the cooker
process event queue. The process already wakes up every 0.1s, which is
often enough for the intentionally coarse 1s delay between
heartbeats. That value was chosen to keep the overhead low while still
being frequent enough for the intended usage.
If necessary, BB_HEARTBEAT_EVENT can be set to a float specifying
the delay in seconds between these heartbeat events.
(Bitbake rev: 7cf22ea057d28c54bd98dc1ab7a43402a29ff1f5)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BBVERSIONS is moderately horrible and it doesn't appear to be actually used by
anyone, so remove it to simplify the finalise codepaths.
(Bitbake rev: 0bb188f01e396052b127e170a25246d79a6d6741)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For shell constructs like
echo hello & wait $!
the process_tokens() method ended up with a situation where "token"
in the "name, value = token" assignment was a list of tuples
and not the expected tuple, causing the assignment to fail.
There were already two for loops (one in _parse_shell(), one in
process_tokens()) which iterated over token lists. Apparently the
actual nesting can also be deeper.
Now there is just one such loop in process_token_list() which calls
itself recursively when it detects that a list entry is another list.
As a side effect (improvement?!) of the loop removal in
_parse_shell(), the local function definitions in process_tokens() get
executed less often.
Fixes: [YOCTO #10668]
(Bitbake rev: d18a74de9ac75ba32f84c40620ca9d47c1ef96a3)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function is simplified by not trying to handle replacing the regex
and just compiling and using it for matching.
- Fix typo in logger output with undefined variable
- Fix pyflake errors
(Bitbake rev: ea298ece8d678889cd5bcde46e00545e9a73edb9)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplify the layer event information to layer version object in toaster
function. Previously this attempted many different methods of trying to
obtain the correct layer from toaster by manipulating the data from the
event or the data from the known layers to try and match them together.
We speed up and simplify this process by making better use of django's
orm methods and by working down the most likely matching methods in order
of accuracy.
[YOCTO #10220]
(Bitbake rev: 6935cc06974ea94c9971ede89b6e8f0eae9c195b)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the unidentified layers issue by making the
toaster-custom-images layer a local layer. By doing this we also fix the
git assumptions made for the local layers which stop recipes and other
meta data being associated with them. This also removed some of the
special casing previously needed when we didn't have the concept of a
local (non git) layer.
Also rename created flag var to a have a different var for each returned
value so that the same value isn't used multiple times.
[YOCTO #10220]
(Bitbake rev: ba5332d4960d7f4f79aef63136796e2fa67284e3)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
(Bitbake rev: c19baa8c19ea8ab9b9b64fd30298d8764c6fd2cd)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(Bitbake rev: 3b45c479de8640f92dd1d9f147b02e1eecfaadc8)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The call of methods iteritems() and itervalues() in sample codes were
replaced by items() and values() to convert to Python 3 by Bitbake rev
d0f904d407f57998419bd9c305ce53e5eaa36b24. But the methods iteritems()
and itervalues() belong to class COWDictMeta not class dict or set. The
modifications should not be made in purpose that it fails to run sample
codes, so revert them.
(Bitbake rev: d140f0ee6f301264e226914766d9f63558acfd6c)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Error handling only caught the cause where a dependency did not have
any colon, but ignored the case where more than one was given. Now
"pn:task:garbage" will raise an error instead of ignoring ":garbage".
The error message had a misplaced line break (?) with the full stop
on the next line. Indenting the explanation with a space might have
been intended and is kept.
split() was called three times instead of just once.
Instead of improving the two instances of the code (one for 'depends',
one for 'rdepends'), the common code is now in a helper function.
(Bitbake rev: 063d255fdcb3f79b2d1b0badedc80384b295a3f5)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 260ced745 added __BBTASKS, __BBANONFUNCS, __BBHANDLERS to the
data that gets hashed, but only after reordering these lists. The
intention probably was to make the hash deterministic, but that's
unnecessary (the content of the variables should already be
deterministic) and hides potential reasons that might require
re-parsing.
(Bitbake rev: 3511d464f3a9d8b4334cda384b35016de69ce49e)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been building to this for a while, default to return expanded
values for getVar/getVarFlags.
We can then go through and remove the "True" option to many of the
calls to this function, all function calls should have a default by now
though since the parameter has been required for a while.
(Bitbake rev: caf5bb9b7fe254bca9da077ebcb84a37d1f96dd4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old style bb.data.getVar/setVar API has long since been deprecated in
favour of d.getVar/setVar and friends.
Now we're about to change the default expansion parameter, drop the old APIs
to simplify the transition and ensure everyone is using the new style functions.
Conversion is trivial if there are remaining stragglers.
I've left bb.data.expand() for now since its more widely used but would make a good
follow up patch series.
(Bitbake rev: 1825604d46fcd29fad6cfd325f1cb1e1b457d2c9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old style bb.data.getVar/setVar API is obsolete. Most of bitbake
doesn't use it but there were some pieces that escaped conversion. This
patch fixes the remaining users mostly in the fetchers.
(Bitbake rev: ff7892fa808116acc1ac50effa023a4cb031a5fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If ud.ignore_checksums is set (which we currently use to suppress the
warnings for missing SRC_URI checksums when fetching files from
scripts), then if we're fetching an npm package we should similarly
suppress the warnings when NPM_LOCKDOWN and NPM_SHRINKWRAP aren't set.
At the same time, make any errors reading either of these files actual
errors since if the file is specified and could not be found, that
should be an error - not the exact same warning.
Fixes [YOCTO #10464].
(Bitbake rev: cefb8c93c8299e68352cf7ec5ad9ca50c0d499ed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be error when BBFILE_PATTERN = None:
BBFILE_PATTERN_foo not defined
This is the correct behaviour, but when the layer sets BBFILE_PATTERN = "",
it would match all the remaining recipes, and cause "No bb files matched BBFILE_PATTERN"
warnings for all the layers which behind it.
When a layer sets BBFILE_PATTERN = "" (for example, a layer only
provides git repos and source tarballs), now it means has no recipes.
This is different from BBFILE_PATTERN_IGNORE_EMPTY, the later one means
that it *may* not have any recipes.
(Bitbake rev: 91c3b34625fac2a0f093a4b46a46e89f813e7972)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Like for buildhistory, warn if buildstats is missing from INHERIT.
CC: Joshua Lock <joshua.g.lock@linux.intel.com>
(Bitbake rev: 3570a8cf94354c8ab07513c304ebae33623fea33)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were presuming that all the layer dependency information was of the
form "^/path/to/layer" to we were just stripping the leading "^" off of
the layer information when we were matching the layer priorities to the
toaster database. This patch splits out the priorities layer match which
gets a regex from the task/recipe match which is gets a path.
(Bitbake rev: e23b574fe52f416184ee43838b8ab28b5b8eb71d)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a bug where a totally wrong value of a variable would be exported if
an exception happened during d.getVar(). Also, print a warning if an
exception happends instead of silently ignoring it. It would probably be
best just to raise the exception, instead, but use the warning for now
in order to avoid breaking existing builds.
[YOCTO #10393]
(Bitbake rev: f639f06cfa280adcc25438387567966271b9b2c3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We recalculate the taskhash to ensure the version we have matches
what we think it should be. When we write out a sigdata file, use
the calculated value so that we don't overwrite any existing file.
This leaves any original taskhash sigdata file intact to allow a
debugging comparison.
(Bitbake rev: 291353b711670ce2da3d45617fc96520bdf09d3f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake can parse metadata in the cooker and in the worker during builds. If
the metadata isn't deterministic, it can change between these two parses and
this confuses things a lot. It turns out to be hard to debug these issues
currently.
This patch ensures the basehashes from the original parsing are passed into
the workers and that these are checked when reparsing for consistency. The user
is shown an error message if inconsistencies are found.
There is debug code in siggen.py (see the "Slow but can be useful for debugging
mismatched basehashes" commented code), we don't enable this by default due to
performance issues. If you run into this message, enable this code and you will
find "sigbasedata" files in tmp/stamps which should correspond to the hashes
shown in this error message. bitbake-diffsigs on the files should show which
variables are changing.
(Bitbake rev: 857829048c14338132784326ba98a71f12192db8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
(Bitbake rev: 8b879fd81fdcf86645cfabad0f54454ba573df52)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The whitelist checks for BB_SETSCENE_ENFORCE were running for every call
to execute(). Since the task list doesn't change for each call into
execute, the checks only need to be ran once.
[YOCTO #10369]
(Bitbake rev: f65e631ab6705dfd9188f19ee423eca33bca7d7d)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this the UI just sits there doing nothing. Showing an
infobar in-UI would be nicer but not much more useful since currently
user couldn't do anything in-UI to fix the situation. Implementation
is based on the one in knotty.
Fixes [YOCTO #9288]
(Bitbake rev: eee9231a543f1d0b9ef3cd8377fc46fd23afb97b)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Either using the memres script or the bitbake call with --server-only
if the port is a string instead of a number then the process hangs
indefinitely causing a loop that never ends.
Add a check at the beginning for the port being a number otherwise
show an error message and exit cleanly.
[YOCTO #10397]
(Bitbake rev: 35927a98daeeb854ef5782e900206af6cd96b3d7)
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some task id manipulations were suboptimal:
* taskfn_fromtid and fn_from_tid were effectively the same function
* many calls to split_tid(), then taskfn_fromtid()
* taskfn_fromtid() called split_tid() internally
This patch adds split_tid_mcfn() to replace split_tid() and returns the
"taskfn" variant being used in many places. We update all core calls
to the new function and ignore the return values we don't need since the
function call overhead of the split_tid wrapper is higher than ignoring
a return value.
The one remaining standalone use of taskfn_fromtid is replaced with
fn_from_tid. I couldn't see any external usage so it was dropped.
There is external usage of split_tid so a wrapper remains for it.
Combined together these changes should improve some of the runqueue task
manipulation performance.
(Bitbake rev: 1bf2ef874fbe47f1320007efa0bdeef8d630b8a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
`if w in self.rq.worker` when w *is* self.rq.worker doesn't make a great deal
of sense, and results in this error:
File ".../poky/bitbake/lib/bb/runqueue.py", line 2372, in runQueuePipe.read():
name = None
> if w in self.rq.worker:
name = "Worker"
TypeError: unhashable type: 'dict'
Most likely this was meant to be 'is' rather than 'in', but rather than
checking after the fact, just include the name in the iteration, instead.
While we're here, also clean up and fix the broken error message.
(Bitbake rev: 267e025cad44c8bd0fb157f1f7a2e08df117ba84)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the ability to pass default signal handler for SIGWINCH in BBProgress
because with multiple instace of BBProgress the original signal handler
set by TerminalFilter (sigwinch_handle) is lost.
This is a fix for stack trace due to multiple async calls of ProgressBar
_handle_resize (ioctl to terminal fd), see:
NOTE: Executing SetScene Tasks
Fatal Python error: Cannot recover from stack overflow.
Current thread 0x00007f70a4793700 (most recent call first):
File
"/home/alimonb/repos/poky/bitbake/lib/progressbar/progressbar.py", line
183 in _handle_resize
File "/home/alimonb/repos/poky/bitbake/lib/bb/ui/knotty.py", line 58
in _handle_resize
File "/home/alimonb/repos/poky/bitbake/lib/bb/ui/knotty.py", line 60
in _handle_resize
...
File "/home/alimonb/repos/poky/bitbake/lib/bb/ui/knotty.py", line 60
in _handle_resize
...
Aborted
(Bitbake rev: 812bd49cb569379ee90d5be28a4b6e60645f1e54)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the correct method to get a message value from the LogMessage object
rather than constructing it ourselves which is not recommended. This
causes an exception when the msg contains a '%' such as when there are
wildcards in file names (something2.%.bbappends)
(Bitbake rev: 11b3b6a7087554d14a2812a9ae463dce740b879e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't always want a traceback when an exception is raised by the
TaskStarted event handler. Silently return if we get a SystemExit or
HandledException, and print the error and return for FuncFailed.
This is done via a separate try/catch block, to avoid firing TaskFailed if all
the TaskStarted event handlers didn't complete, otherwise the bitbake UIs get
unhappy.
(Bitbake rev: ca5b788280ad4303cc08a376e847cbbeda31970c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use logger.addHandler(), rather than assigning an array of Handlers
to the loggers handlers property directly, to avoid a warning from
Python 3 about unclosed files:
$ bitbake
Nothing to do. Use 'bitbake world' to build everything, or run 'bitbake --help' for usage information.
WARNING: /home/joshuagl/Projects/poky/bitbake/lib/bb/event.py:143: ResourceWarning: unclosed file <_io.TextIOWrapper name='/home/joshuagl/Projects/poky/build/tmp/log/cooker/qemux86/20161004094928.log' mode='a' encoding='UTF-8'>
logger.handlers = [stdout]
(Bitbake rev: 1e23b1f1a80066223b98e18b163840051ac74944)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cases there is a need to fire bb events into multiple
python threads so locking is needed (writing to a fd/socket).
Adding a helper functions for disable/enable by request to avoid
overhead.
[YOCTO #10330]
(Bitbake rev: a583dc0b296415ec904c081c4de96ceef46732a8)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value used for exclusion was always being expanded. This is actually
a bad idea since in most cases you'd want to exclude an unexpanded
value and makes it impossible to use the variable as intended.
This adjusts things so the value is not expanded and we can correctly
remove things from checksums much more easily.
(Bitbake rev: 81bc8201c475d2b6bef0168573915ad0140f6dad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Error message
ERROR: Unprocessed MetadataEvent <bb.event.MetadataEvent object at 0x7f750e671a58>
doesn't give a lot of information about the event. It just prints
event object, which is always bb.event.MetadataEvent.
Including event type into the error message should make it more
informative:
ERROR: Unprocessed MetadataEvent TaskArtifacts
(Bitbake rev: 603c7c13536d3fa1786270e863688c1d2e511196)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New MetadataEvent 'TaskArtifacts' causes this error.
Processing of this event will hopefully be implemented in future.
For now it should be enough to just skip it.
(Bitbake rev: 114a3fe3f23ef09782c5aa18f425d0d0dbdfdd35)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the bug in processing EnvironmentError exception,
toasterui ignores it. As EnvironmentError is a base for OSError
and IOError this means that all OSError and IOError exceptions
were silently ignored.
(Bitbake rev: c8f4ca008bf9396b0ed45d44bfe2220c82a614a9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Buildinfohelper assumes that all files mentioned in
manifest exist in deploy/ directory, which is not always
the case. Toaster crashes with OSError trying to
call os.stat on non-existing file.
Checking if file exists before processing it should
fix this.
[YOCTO #10185]
(Bitbake rev: 54565e7ca84d2722a2454e7fa52cda564b28b527)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the worker fails to launch, ensure the task is shown as failed rather
than a confusing "all succeeded" message.
Patch from Juro Bystricky
[YOCTO #10335]
(Bitbake rev: 0e9a2ff96d138641501874a1cd7aa6cc7e94d727)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to obtain the current directory from a directory
that does not exist anymore, an exception is raised.
This patch handles such exception.
[YOCTO #10331]
(Bitbake rev: 4bcf77589312d9936340d8c308006c2fc9baf67c)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When calculating how many lines we'd printed we weren't properly taking
the progress bars into account, with the result that sometimes if the
last line printed on the terminal wrapped to the next line (which is
possible) we backed up less lines than we should have.
Additionally, we should always print a newline after updating the
progress bar - there's no need to check if there wasn't output (there
always will be courtesy of our overridden _need_update()) and we now
allow the line to wrap so we don't need to check the other condition
either.
Hopefully this will fix [YOCTO #10046].
(Bitbake rev: 326d18d96faf02675ba34ad3c3a20cd424b39b91)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its often useful to know how long a task has been running for. This patch
adds that information to the task display, updating every 5s if there
were no other updates so the user can see how long tasks have been running
for.
[YOCTO #9737]
(Bitbake rev: 6c42025e5dd7761213be3f82f3252a7892d2239d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A "bitbake world -c unpack" currently breaks as not all tasks have an
unpack task. This change allows addition of world targets only if the
specified task exists which makes certain commands possible when otherwise
you just get errors which can't easily be avoided.
(Bitbake rev: ca4f5e6d01b5c8cf315f59bc86194d63c0d3d042)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you use the subdir parameter in a SRC_URI and pass an absolute path
then it gets appended to the unpack directory instead of being used directly.
This is inconvenient as it may be useful to use ${S} when you want to unpack a
file into the source tree.
Change this behaviour so that absolute paths are used directly instead of being
appended to the root directory. To ensure that recipes cannot write files to an
arbitrary location enforce that the subdir starts with the unpack root.
(Bitbake rev: c3873346c6fa1021a1d63bddd9b898a77c618432)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want a traceback for this exception, we need to catch it, fire
TaskFailed, and return failure.
(Bitbake rev: 63966ada459d44d3dc7817ad2a026a22e8f6700f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you "bitbake glibc-locale" then delete the libpcre-native sstate
and "bitbake glibc-locale -C package_write_rpm", it will fail with
rpmbuild missing the libprce library.
The reason is that libpcre-native fails to install from sstate (since
it isn't present) but doesn't get built and hence rpm-native tries to
run without its dependencies.
The simplest fix is not to add "covered" tasks which have failed to
install sstate. I can't help feeling there is more to this issue but
this does fix the current problem and shouldn't have adverse affects.
It is an unusual situation to have missing dependencies in sstate since
they're usually all present or not at all.
I've taken the opportunity to remove some old cruft from when we had
numeric task ids, the code can be simpler now.
(Bitbake rev: ba566b46d530b495f12f3a74f76434717b22a020)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the layer is local source don't try and work out the location of
the layer by using the git information (getGitCloneDirectory)
[YOCTO #10199]
(Bitbake rev: 3dfea5214d4bd006e26630e5024774ecb84ea527)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to lock build environment before changing
build status as this operation is very fast. However, there
is a need to unlock it after changing build status.
Explicitly unlocked BuildEnvironment after build reaches
final status SUCCEEDED, FAILED or CANCELLED. This should
allow runbuilds process to pickup next build faster.
(Bitbake rev: faa88272d656640c039572c5c8f3e6c56535b6f7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Called signal_runbuilds API when build is scheduled, cancelled or
finished to notify runbuilds process about builds status change.
[YOCTO #8918]
(Bitbake rev: fe08f0fa4b328908e73695ebbceca87bc86a49f9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The event handling 'Exception' was catching and triggering a backtrace. This
trace was obscuring any errors from an event handler that had raised the
BBHandledException, which should indicate do not print additional information.
(Bitbake rev: 51ca5193a5674b27d816140b0254f485912177a2)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add recommended layers to collection_depends[] so that dynamic
priority assignment will work for both depends and recommends.
Recommended layers do not cause an error or warning
if they are not in the collection list, but debug messages
are output for level 3 and above.
explode_dep_versions2 returns a dictionary, so we
change the variable deplist to depDict. The dictionary
values are lists which are either empty or contain only one
version specification.
(Bitbake rev: 20cdc3d609f8aea992f97c3db336574d3a549973)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Task name was incorrectly added to the targets that already
contained :task suffix and fired with BuildInit event. This
caused Toaster to create incorrect Target objects and show
them in UI.
[YOCTO #10221]
(Bitbake rev: b7faf1af3bd3110fba347fbe6e432fc4ee66590a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Users are surprised when dirs/cleandirs aren't acted upon for
empty functions. This reorders the code slightly so that those
flags are acted upon for empty functions as there are cases where
this is expected.
[YOCTO #10256]
(Bitbake rev: 5bf874673d75b5f4ff2b34f0ab8502558ee84d00)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The implementation of SRCREV_FORMAT has at least two issues:
1. Given two names "foo" and "foobar" and SRCREV_FORMAT = "foo_foobar",
"foo" might currently get substituted twice, and "foobar" not at
all.
2. If the revision substitued for some name happens to contain another
name as a substring, then that substring might incorrectly get
replaced.
Fix both issues by sorting the names with the longest ones first and
replacing all names at once with a regular expression. This was inspired
by
http://stackoverflow.com/questions/6116978/python-replace-multiple-strings.
(Bitbake rev: 8e6a893cb7f13ea14051fc40c6c9baf41aa47fee)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we've already fetched a particular URL then we do not need to do so
again within in the same operation. Maintain an internal list of fetched
URLs to avoid doing that.
(Bitbake rev: b4705c80add1f618c11a9223cdd9578d763b50ec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All logging messages are printed on stdout when processing
UI event queue. This makes it impossible to distinguish between
errors and normal bitbake output. Output to stderror or stdout
depending on log level should fix this.
(Bitbake rev: 56ac0d4c7a5f47aeb707b15a0c305d9f73aae945)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake collects all events in special event queue when called with
-w option. However, it starts to write events to the eventlog only
after BuildStarted event is received. In some cases this event is
not received at all, e.g. when bitbake is run with --parse-only
command line option.
It makes sense to write all collected events when CookerExit event
received to make sure all events are written into the eventlog even
if BuildStarted event is not fired.
[YOCTO #10145]
(Bitbake rev: 57912de63fa83550c0ae658eb99b76e9cc91a8d1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When converting variable history file names to relative
paths, keep the layer directory's name so that the user
can distinguish between conf files with the same name.
[YOCTO #8188]
(Bitbake rev: 59561d652af91c2099b735084f0e44275d68e637)
Signed-off-by: David Reyna <david.reyna@windriver.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No functional changes, just make a couple of minor tweaks to the
comments for edit_metadata():
* There are four elements to be returned by the callback function
* Add an example return statement for when you don't want to modify the
value
(Bitbake rev: 99675c19375c96140bc8ae8f9fc3a1945a77cebb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The correct name of the parameter is "version" not "ver" so ensure we
aren't misleading the user by giving the latter in an example.
(Bitbake rev: 14c045c6a20993d389b91ae2459d811a1430a7b2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow using a top-level shrinkwrap file with one or more npm://
dependencies, i.e. if the module isn't found at the top level then look
one level down.
Part of the fix for [YOCTO #9537].
(Bitbake rev: f7de3f8b5f628dee043fe783148812914ab20813)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"npmpkg" can be a default, but it should respect the subdir parameter as
with other FetchMethods. This allows us to have more than one npm://
entry in SRC_URI without nasty hacks.
Fix required in order to support [YOCTO #9537].
(Bitbake rev: e6a94d2091ec5d42f25102334a8492a731b8dec3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You cannot set a URL-specific value in an object-level variable on
the FetchMethod in urldata_init() or the result is the value specific to
the last URL will be the one that gets set. This prevented fetching more
than one npm:// URL correctly - the other tarballs would not download to
the correct location and do_unpack failed to find them as a result.
Fix required in order to support [YOCTO #9537].
(Bitbake rev: 1435b49ea7d0f9d4cc4a665fb2aa83d1eea7900f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were downloading into the current directory here, which is fine if
that current directory can be expected to be the right place - but
that's not true when called from recipetool within OE. We should
explicitly specify the directory to run the command in and then there
won't be a problem.
(Bitbake rev: 0ddaf725e5a0675b252b7f80b1706370e478175b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ud.pkgdir argument was being passed as the 'quiet' argument to
runfetchcmd, not the 'workdir' argument, resulting in fetching the svn module
into the root of DL_DIR, not where it belongs.
Cc: Matt Madison <matt@madison.systems>
(Bitbake rev: dc756510a95f88b192352be6fcd1d5d77852c348)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, there is a check to remove the TOSTOP attribute from
a tty to avoid hangs. It assumes that sys.stdout will have a
file descriptor and this is not always true, some IO classes
will throw exceptions when trying to get its file descriptor.
This will add a check for such cases and avoid throwing an
exception.
[YOCTO #10162]
(Bitbake rev: cb4f8f6efa28ef2b13bc738a0118b876baa15b3e)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because some image_license.manifest files contain multiple
FILES lines, and because those lines can sometimes not contain
a list of files (i.e. they look like "FILES:\n"), we were
resetting the list of kernel artifacts when we hit the second
"empty" line.
Fix by ignoring any FILES line which doesn't list files, and by
appending any files found in a valid FILES line, rather than
overwriting the existing list.
[YOCTO #10107]
(Bitbake rev: 927ec3524625ac731326b3c1c1361c2a4d2bd9e1)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If http basic auth creds were added to sstate mirrors like so:
https://foo.com/sstate/PATH;user=foo:bar;downloadfilename=PATH
The sstate mirror check would silently fail with 401 unauthorized.
This patch allows both the check, and the wget download to succeed by
checking for user credentials and if present adding the correct
headers, or wget params as needed.
[ YOCTO #9815 ]
(Bitbake rev: cea8113d14da9e12db80a5b6b5811a47a7dfdeef)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't execute the same task for the same package_arch multiple
times as the current setup has conflicting directories. Since
these would usually have the same stamp/hash, we want to execute in
sequence rather than in parallel, so for the purposes of task execution,
don't consider the "extra-info" on the stamp files. We need to add
a parameter to the stamp function to achieve this.
This avoids multiple update-rc.d populate_sysroot tasks executing in
parallel and breaking multiconfig builds.
(Bitbake rev: a9041fc96a14e718c0c1d1676e705343b9e872d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need a separate fetcher cache per multiconfig as the revisions and other
SRC_URI data can potentially be different. For now, this is the simplest way
to achieve that and avoids linux-yocto kernel build failures when targeting
multiple machines for example.
(Bitbake rev: d98cc31d6668bc1d6372664593126b5e5132ef2c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Parsing a recipe is such a common task for tinfoil-using scripts, and is
a little awkward to do properly, so add an API function to do it. This
should also isolate scripts a little from future changes to the internal
code. The first user of this will be the OpenEmbedded layer index update
script.
Part of the fix for [YOCTO #10192].
(Bitbake rev: 39780b1ccbd76579db0fc6fb9369c848a3bafa9d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To accommodate the OpenEmbedded layer index recipe parsing, we have to
have the ability to pass in a custom config datastore since it
constructs a synthetic one. To make this possible after the multi-config
changes, rename the internal _load_bbfile() function to parse_recipe(),
make it a function at the module level (since it doesn't actually need
to access any members of the class or instance) and move setting
__BBMULTICONFIG inside it since other code will expect that to be set.
Part of the fix for [YOCTO #10192].
(Bitbake rev: 5b3fedfe0822dd7effa4b6d5e96eaf42669a71df)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since calling the shutdown() function is highly recommended, make
tinfoil objects a little easier to deal with by adding context manager
support - so you can do the following:
with bb.tinfoil.Tinfoil() as tinfoil:
tinfoil.prepare(True)
...
(Bitbake rev: f59bc6be2b4af1acdcf6a1b184956b5ffd297743)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the fetchers all preserve the current working
directory, the cwd changes in the try_mirror_url,
download, and checkstatus methods are no longer needed.
(Bitbake rev: 0ed8975c42718342a104a9764a58816f964ec4ea)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: deab9a30987b225922490ca186c5307c15d45b82)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the methods in all fetchers so they don't change
the current working directory of the calling process, which
could lead to "changed cwd" warnings from bitbake.
(Bitbake rev: 6aa78bf3bd1f75728209e2d01faef31cb8887333)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* unify the format how the task is described
* don't show taskid followed by taskstring as the taskstring is
different only for setscene tasks (by _setscene suffix)
* the duplicated output was introduced by:
2c88afb taskdata/runqueue: Rewrite without use of ID indirection
as reported and confirmed as a bug here:
http://lists.openembedded.org/pipermail/openembedded-core/2016-June/123148.html
* show:
NOTE: Running task 541 of 548 (/OE/build/oe-core/openembedded-core/meta/recipes-core/zlib/zlib_1.2.8.bb:do_package)
instead of much longer:
NOTE: Running task 541 of 548 (ID: /OE/build/oe-core/openembedded-core/meta/recipes-core/zlib/zlib_1.2.8.bb:do_package, /OE/build/oe-core/openembedded-core/meta/recipes-core/zlib/zlib_1.2.8.bb:do_package)
and similarly for failed tasks:
ERROR: Task (virtual:native:/OE/build/oe-core/openembedded-core/meta/recipes-core/zlib/zlib_1.2.8.bb:do_install) failed with exit code '1'
instead of much longer:
ERROR: Task virtual:native:/OE/build/oe-core/openembedded-core/meta/recipes-core/zlib/zlib_1.2.8.bb:do_install (virtual:native:/OE/build/oe-core/openembedded-core/meta/recipes-core/zlib/zlib_1.2.8.bb:do_install) failed with exit code '1'
(Bitbake rev: 696693d45f5eff1226866ed79dbfb67161d8cd3f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce a new 'usehead' url parameter for git repositories. Specifying
usehead=1 causes bitbake to use whatever commit the repository HEAD is
pointing to. Usage of usehead=1 is only allowed for local git
repositories, i.e. it must always be accompanied with protocol=file url
parameter.
[YOCTO #9351]
(Bitbake rev: 2673fac5a9d06de937101e3fb2ddf1e60ff99abf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set this env variable to 'yes' to preserve temporary directories used by
the fetcher tests. Useful for debugging tests.
(Bitbake rev: 04132b261df9def3a0cff14c93c29b26ff906e8b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the notion of supporting multiple configurations within
a single build. To enable it, set a line in local.conf like:
BBMULTICONFIG = "configA configB configC"
This would tell bitbake that before it parses the base configuration,
it should load conf/configA.conf and so on for each different
configuration. These would contain lines like:
MACHINE = "A"
or other variables which can be set which can be built in the same
build directory (or change TMPDIR not to conflict).
One downside I've already discovered is that if we want to inherit this
file right at the start of parsing, the only place you can put the
configurations is in "cwd", since BBPATH isn't constructed until the
layers are parsed and therefore using it as a preconf file isn't
possible unless its located there.
Execution of these targets takes the form "bitbake
multiconfig:configA:core-image-minimal core-image-sato" so similar to
our virtclass approach for native/nativesdk/multilib using BBCLASSEXTEND.
Implementation wise, the implication is that instead of tasks being
uniquely referenced with "recipename/fn:task" it now needs to be
"configuration:recipename:task".
We already started using "virtual" filenames for recipes when we
implemented BBCLASSEXTEND and this patch adds a new prefix to
these, "multiconfig:<configname>:" and hence avoid changes to a large
part of the codebase thanks to this. databuilder has an internal array
of data stores and uses the right one depending on the supplied virtual
filename.
That trick allows us to use the existing parsing code including the
multithreading mostly unchanged as well as most of the cache code.
For recipecache, we end up with a dict of these accessed by
multiconfig (mc). taskdata and runqueue can only cope with one recipecache
so for taskdata, we pass in each recipecache and have it compute the result
and end up with an array of taskdatas. We can only have one runqueue so there
extensive changes there.
This initial implementation has some drawbacks:
a) There are no inter-multi-configuration dependencies as yet
b) There are no sstate optimisations. This means if the build uses the
same object twice in say two different TMPDIRs, it will either load from
an existing sstate cache at the start or build it twice. We can then in
due course look at ways in which it would only build it once and then
reuse it. This will likely need significant changes to the way sstate
currently works to make that possible.
(Bitbake rev: 5287991691578825c847bac2368e9b51c0ede3f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you don't do this, with Python 3 you get a warning on exit under some
circumstances.
(Bitbake rev: 49502685df3e616023df352823156381b1f79cd3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
unset VAR
will clear variable VAR
unset VAR[flag]
will clear flag "flag" from var VAR
(Bitbake rev: bedbd46ece8d1285b5cd2ea07dc64b4875b479aa)
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than passing in a datastore to build on top of, use the data builder
object in the cache and base the parsed recipe from this. This turns
things into proper objects building from one another rather than messy
mixes of static and class functions.
This sets things up so we can support parsing and building multiple
configurations.
(Bitbake rev: fef18b445c0cb6b266cd939b9c78d7cbce38663f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some cases we want to parse recipes without any cache
setup or involvement. Split out the standalone functions into
a NoCache variant which the Cache is based upon, setting the scene
for further cleanup and restructuring.
(Bitbake rev: 120b64ea6a0c0ecae7af0fd15d989934fa4f1c36)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather that the current mix of static and class methods, refactor
so that the cache has the databuilder object internally. This becomes
useful for the following patches for multi config support.
It effectively completes some of the object oriented work we've been
working towards in the bitbake core for a while.
(Bitbake rev: 7da062956bf40c1b9ac1aaee222a13f40bba9b19)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needing to access these static methods through a class doesn't
make sense. Move these to become module level standalone functions.
(Bitbake rev: 6d06e93c6a2204af6d2cf747a4610bd0eeb9f202)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simple refactoring to allow for multiconfig support.
(Bitbake rev: 266b848da40904446eb1d084bbdc5307a9b45197)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of multi-config and the possibility of distributed
builds we need arrays of workers rather than the existing two.
This refactors the code to have a dict() of workers and a dict of
fakeworkers, represented by objects. The code can iterate over these.
This is separated out from the multi-config changes since its separable
and clearer this way.
(Bitbake rev: 8181d96e0a4df0aa47287669681116fa65bcae16)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current codepaths are rather confusing. Stop passing these
as parameters and use the ones from when the object is created.
(Bitbake rev: 8c992c148d9619b10eeae8bbd9376ecf408037a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added to enable the usage of git through proxies.
(Bitbake rev: 449fc52e483a3bf1cec1c5d8cf8c3946ec5292ab)
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's not a whole lot of point showing how many tasks are running when
we're in quiet mode, it just looks a bit strange particularly when it's
not running any tasks.
(Bitbake rev: 5317200d9cd73c6f971bc1b0cfe8692749e27e3a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we have the task number here we need to subtract 1 to get the number
of tasks completed.
(Bitbake rev: 7c78a1cd3f0638ae76f7c7a469b7f667c7c58090)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple of fixes for the "Initialising tasks" progress bar behaviour:
* Properly finish the progress bar when using bitbake -S
* Finish the progress bar before calling BB_HASHCHECK_FUNCTION (so that
in OE when that shows its own "Checking sstate mirror object
availability" progress bar it gets shown on the next line as it
should).
(Bitbake rev: de6759d8e9990e426e6d6464a2e05381cd4c12d6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The CUPS ipptool URL we were checking now redirects to github where the tarball
isn't present, so remove it from the test suite.
(Bitbake rev: 4b50895fb3462b21e3874a2e99c363c8d05e89e6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds handling of the non-git layers to create and update the
corresponding layer objects in Toaster.
(Bitbake rev: 0a9b5d7d9655dbb09d458fc6e330e932f0f9dab6)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many of the methods in toasterui and buildinfohelper rely
on the internal state of the buildinfohelper; in particular, they
need a Build object to have been created on the buildinfohelper.
If the creation of this Build object is tied to an event which
may or may not occur, there's no guarantee that it will exist.
This then causes assertion errors in those methods.
To prevent this from happening, add an _ensure_build() method
to buildinfohelper. This ensures that a minimal Build object
is always available whenever it is needed, either by retrieving
it from the BuildRequest or creating it; it also ensures that
the Build object is up to date with whatever data is available
on the bitbake server (DISTRO, MACHINE etc.).
This method is then called by any other method which relies on
a Build object being in the internal state, ensuring that the
object is either available, or creating it.
(Bitbake rev: 0990b4c73f194ec0be1762e4e48b1a525d8349fb)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify buildinfohelper and toasterui so that they record the
recipe parse progress (from ParseProgress events in bitbake)
on the Build object.
Note that because the Build object is now created at the
point when ParseStarted occurs, it is necessary to set the
build name to the empty string initially (hence the migration).
The build name can be set when the build properly starts,
i.e. at the BuildStarted event.
Then use this additional data to determine whether a Build
is in a "Parsing" state, and report this in the JSON API.
This enables the most recent builds area to show the recipe
parse progress.
Add additional logic to update the progress bar if the progress
for a build object changes.
[YOCTO #9631]
(Bitbake rev: f33d51d46d70e73e04e325807c1bc4eb68462f7b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In situations where a bitbake run fails before the build
properly starts and BuildStarted is fired, a UI has no way
to get at the targets passed to the build. This makes it
difficult for the UI to report on the targets which failed.
Fire a BuildInit event before running buildTargets() or
buildFile(). This enables a UI to capture targets passed to
buildTargets(), even if the build fails (e.g. the targets
themselves are invalid).
[YOCTO #8440]
(Bitbake rev: ac02fda870965bf7d44ff5688eda54d2d11ab9c7)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git annex fetcher needs git annex to be initialized. Previously
it was using 'git annex sync' to do this, but that has the downside
of moving the checkout to the tip of the default branch. This means
that tags, SRCREV, etc don't work in the gitannex case.
(Bitbake rev: c1a57e2dd7fc96834643be5591a96f239215481a)
Signed-off-by: Terry Boese <terry.boese@vecima.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Revision d0f904d407f57998419bd9c305ce53e5eaa36b24 accidentally broke
items() and values() and made them cause stack overflows. Undo that
breakage.
(Bitbake rev: 88c5beca705efa7df4a96fb2aaf3f13c336ac328)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Starting from tar 1.29 the --exclude option won't work
anymore if is not used before the path. There are some
fetch modules that copy the ptest using tar and --exclude
option. This fixes these for bitbake.
[YOCTO #9763]
(Bitbake rev: cc71d5d9da71ea5f21d02f3b2fbf119bd2d794f0)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If using OE's externalsrc with a source tree that is not tracked by git
and contains broken symlinks, you can receive "TypeError: unorderable
types: NoneType() < str()" within the file checksum code due to:
checksums.sort(key=operator.itemgetter(1))
Don't add files with no checksum to the checksums list in order to avoid
this.
(Bitbake rev: 484fe5a3f5b840e5422cbdff0eef9aecfe944a19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If better_exec() throws a subprocess.CalledProcessError then show the output to
the user as it likely contains useful information for solving the problem.
(Bitbake rev: 8a6424ed871c3cbacd21cae8bc801197f83d67a6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While switching from master to krogoth build with a common download directory,
got a large number of warnings like the one listed below:
WARNING: freetype-2.6.3-r0 do_fetch: Couldn't load checksums from
donestamp /home/maxin/downloads/freetype-2.6.3.tar.bz2.done: ValueError
(msg: unsupported pickle protocol: 4)
These warnings are caused by the difference in pickle module
implementation in python3(master) and python2(krogoth). Python2 supports
3 different protocols (0, 1, 2) and pickle.HIGHEST_PROTOCOL is 2 where as
Python3 supports 5 different protocols (0, 1, 2, 3, 4) and
pickle.HIGHEST_PROTOCOL is obviously 4.
My suggestion is to use 2 since it is backward compatible with python2
(all the supported distros for krogoth provides python2 which supports
pickle protocol version 2)
(Bitbake rev: cc67800f279fb211ee3bb4ea7009fdbb82973b02)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that the logging FIFO doesn't do a complete read (or the sender a
complete write) with the result that an incomplete message is read in bitbake.
This used to result in silently truncated lines but since 42d727 now also
results in a warning as the start of the rest of the message isn't a valid
logging command.
Solve this by storing incoming bytes in a bytearray() across reads, and parsing
complete messages from that.
[ YOCTO #9999 ]
(Bitbake rev: 508112793ee7ace613f07695222997309a2ca58f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need to keep track of layerindex data in our database. And
using branch==release is very confusing in the schema. Instead use the
existing Release definition to keep track of which release a
layer_version is for.
Remove the Branch model and all references to it.
Create a migration path to convert from up_branches to their
corresponding releases.
(Bitbake rev: f8f4cffe6fd371f3a7e63690c68f3fcb5dc1f297)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In MultiStageProgressReporter, set a guard when we start the progress
so that it can't happen more than once. This fixes "Initialising
tasks.." being shown twice in succession when running bitbake in
non-interactive terminal mode.
(Bitbake rev: 923e68e069127ee7f6e11b91eb1cfa09d502a110)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that progress information we can extract from a task is
rarely apportioned closely enough to the time taken for the ETA to be
accurate, so showing it is going to be misleading most of the time for
anything but the most basic of examples. Let's just remove it and avoid
misleading (or worse, annoying) the user.
Fixes [YOCTO #9986].
(Bitbake rev: 235db4870b11db97250979e647b54cdb5ce4fbb6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify custom widgets then we don't want to assume where the
"extra" position is - you should have to specify it, and if it isn't
specified it shouldn't just wipe out the last widget or you can start to
see odd behaviour if you're modifying the code.
(Bitbake rev: 19e33c10feb1637589ceb05b5e8d58b1e012ccb8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using a PREMIRROR with plain (non-unpack) files, a SRC_URI like
SRC_URI = "file://devmem2.c"
will cause devmem2.c to be a symlink in the WORKDIR pointing to the
local PREMIRROR.
Trying to apply a patch on this file will either modify the file on
the PREMIRROR or will fail due to sanity checks:
ERROR: devmem2-1.0-r7 do_patch: Command Error: 'quilt --quiltrc /cache/build-ubuntu/sysroots/x86_64-oe-linux/etc/quiltrc push' exited with 1 Output:
Applying patch devmem2-fixups-2.patch
File devmem2.c is not a regular file -- refusing to patch
(Bitbake rev: cfd481fe9799e7a4c6bfac32e56cc91cfcd81088)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason the data written in this way is coming back out the
files out of order. I've not been able to simplify the test case to a
point where this was standalone reproducible. Simplify the code and
write out the cache files sequentially since this seems to avoid the
errors and makes the code more readable.
(Bitbake rev: 14ec47f5f0566dbd280fae8a03160c8500ad3929)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've seen cache corruption where the pairs come out in a different
order to the way we saved them for unknown reasons. Add better sanity
checking to give a more user friendly error rather than a crash/traceback.
Also allows the system to reparse and recover.
(Bitbake rev: 4be4a15491530bd6dc018033ad3d4b2562ab6e23)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we no longer have random data like version fields in these structures
and we can assume any extra cache data subclasses our class, simplify the
code.
This is mostly reindenting after removal of the pointless type checks.
(Bitbake rev: 5eb36278ac9975de1945f6da8161187320d90ba7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Richard Purdie
Sujith H
Ismo Puustinen
Patrick Ohly
Ross Burton
Markus Lehtonen
Michael Wood
Joshua Lock
Kai Kang
Robert Yang
Olaf Mandel
brian avery
Aníbal Limón
Randy Witt
Jussi Kukkonen
Benjamin Esquivel
Christopher Larson
Ed Bartosh
Juro Bystricky
Mark Hatle
Joe Slater
Ulf Magnusson
David Reyna
Mariano Lopez
Elliot Smith
Stephano Cetola
Matt Madison
Jonathan Liu
Martin Jansa
Jérémy Rosen
Francisco Pedraza
Ulrich Ölmann
Terry Boese
Maxin B. John
Mario Domenech Goulart
Enrico Scholz