Various changes needed to enable to run Toaster in the
Build Appliance:
1. Pre-install packages as specified by the file
"bitbake/toaster-requirements.txt"
2. Include pip3 in the image
3. Include tzdata in the image (needed by django)
4. Bump SRCREV to a commit with proper settings.py (ALLOWED_HOSTS)
for Django 1.8.16
5. Added README_VirtualBox_Toaster.txt to provide steps for
configuring VirtualBox network adapters (NAT or Bridged)
and steps to launch Toaster
[YOCTO#10767]
(From OE-Core rev: dffbac64bbf86c91247ba7373b3b5bd6af24103f)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously if IMAGE_TYPEDEP_* contained a conversion type of the form,
"foo.bar", the dependency on CONVERSION_DEPENDS_bar would not get added
to the task depends for do_rootfs.
[YOCTO #10883]
(From OE-Core rev: 037d39898e0e16c6d5b24a8d3844abfb328d3c14)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test that ensures if IMAGE_TYPEDEP_* contains a conversion type,
that the corresponding CONVERSION_DEPENDS_ for that type gets added to
the dependency tree for do_rootfs.
(From OE-Core rev: 9cf9c725f7d534c326ffd95ec539b041f4ad286f)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added <layer>/wic directory to the list of paths to look
for wks files. This makes wic behaviour consistent when
invoked manually and by bitbake.
(From OE-Core rev: d345985db69dc86e9a8f8e2506b250d8780374cb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These alternatives are only used to provide an unversioned brcmfmac-sdio.bin,
which was required by kernels prior to 3.13. As these alternatives all have the
same priority there's no determinism in which one is selected, and current
kernels (since January 2014) use the appropriately versioned firmware names.
(From OE-Core rev: 7ac00f2efee4973703ef9725c81242bd6eae36c0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the gummiboot project is no longer being maintained
and we are using systemd-boot as a replacement instead,
we can now clean up all remaining gummiboot files.
[YOCTO #10332]
(From OE-Core rev: 65eb3f51b70baaf24de871301a7247d5baed00ed)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10818]
There is a weird and intermittant error that can occur on any given
distribution that has a 4.3+ Linux kernel and a version 228+ systemd.
The error happens during an initial build of an image and indicates
that resources are unavailable. Investigation determines that
resources are available. The combination of the kernel and the
systemd in a distro is causing issues when a distro is upgraded.
yocto-project-qs:
I added a note in the two areas where the user is stepped through
the bitbake process to build an image. The note mentions the
possibility of the error, the host configuration situation, and a
couple work-arounds, which are to reboot the machine or to set the
"DefaultTaskMax" systemd parameter to "infinity".
ref-manual:
Added the same note in the "Building an Image" section.
(From yocto-docs rev: 3516803f9e6b5a29e4f95d31742c6e03ff63ef41)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 98ebe9acccceea2b833c1372a3e664befd1b6aef)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10621]
bmaptool is integrated into the OpenEmbedded build system but is
not documented. I added a new section describing how to flash an
image to media using the tool. Also, updated a small section in the
Wic part of the manual that used "dd" to flash an example. I added
a bmaptool counterpart here and referenced the reader back to the
main new section.
(From yocto-docs rev: 83a9a3aa5f20c7f389306eea9213eabea997aba1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7096]
Applied a couple review comments to the section to clarify where
to set key variables. Also fixed an incorrect variable name used
to specify the *.cpio file.
(From yocto-docs rev: 24861b36804cbd636aafc36b1918bcfe33ca3811)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6132]
No mention of how to make the target directory /var/log
persistent. I added a note to the "post-install-logging"
image feature that points to the new VOLATILE_LOG_DIR
variable description, which I added to the glossary.
(From yocto-docs rev: 5d2bdf49e569e44d02602501d72418f04dbe6e4a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10763]
The final example in the section describing how to create
the base recipe using receipetool create was wrong. I updated
it to use the -d option in addition to the -o opetion. I also
changed the description to match appropriately.
(From yocto-docs rev: 8cc6d5e21532eeaac0e6d9ace3e0b58803a9804e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7096]
We did not document how to create an initramfs image to be included
with a kernel build. Various variables sort of inferred the
knowledge. I created a new section in the "Common Tasks" section
of the dev-manual that describes how to create an initramfs image.
Also, I updated the kernel.bbclass reference section to point back
to the new "how-to" section.
Finally, I also created a bunch of cross-reference links from various
related variables back to the new "how-to" section.
(From yocto-docs rev: 289dfbd5d24241e42446a043104eecd6dca76f13)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This term was incorrect and I have replaced it with the
term "partitioned."
(From yocto-docs rev: 50dd5c6994a2f799fdaf1ccbf7138b0074e981ee)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
new information on how wic works
(From yocto-docs rev: 7b6a54a593a678442541b1fa6847498a792183c7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new variable points to the location of the wics kickstart
file.
(From yocto-docs rev: 80d18224140f95fdca0b4efad8f6a6e545ee4d56)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bbmake hasn't existed for a while (a decade+) so we should
probably remove the references.
(Bitbake rev: 4170cf874850b950f31d2e36c895c110c0b096c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These imports were from python 2.6 and earlier, 2.4 in some cases.
Drop them since we're all python3 now.
(Bitbake rev: 7ef12684e8647b006bf46cae695069d4bfece1cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new mtd-utils (version 2.0) has been autotooled so the test needs to touch
Makefile.am instead of Makefile.
(From OE-Core rev: acce512a0b85853b5acf2ef07e4163a3b4f33a98)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove "-e MAKEFLAGS=" from EXTRA_OEMAKE to fix:
ERROR: hdparm-9.50-r0 do_package: QA Issue: File '/sbin/hdparm.hdparm' from hdparm was already stripped, this will prevent future debugging! [already-stripped]
ERROR: hdparm-9.50-r0 do_package: Fatal QA errors found, failing task.
The "-e MAKEFLAGS=" would cause submake can't get vars from environment,
The git log said that it was added for fixing a QA warning, but
everything is OK after remove it now.
(From OE-Core rev: 6305c1361c0d1140e37513402532600528a63744)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes following error in configure:
FATAL ERROR: msgfmt does not seem to be installed.
attr cannot be built without a working gettext installation.
(From OE-Core rev: d044fad8a0ac5d57deb88b25106f3a39cb7c1636)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we can't inherit pythonnative, we need this dep explicitly.
(From OE-Core rev: 63530f59e43738bac081aaf3c89ec57006038dce)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It might not be speedy, but it does build now.
(From OE-Core rev: 79f7e215ee7c176f02efafe7359aaa77dbd9430c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly use strftime+strptime rather than snprintf+atol. This fixes the
build for X32, where long's size doesn't match that of time_t.
(From OE-Core rev: 72fa7d558a43ed053547ddc74972631504e40614)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apply patch to fix the X32 build from https://github.com/sjnewbury/x32
(From OE-Core rev: cdd6130255d8fc78b0a43fad410cde024cb1b9a5)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was casting to a pointer, and the pointer sizes are 32-bit on X32, not
64-bit. Adjust as appropriate.
(From OE-Core rev: d9dca61ed26af166df913f34bdce3f2830682b33)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should probably patch it to stop adding the -m argument to CFLAGS/LDFLAGS
in the first place, since we pass it in via CC, but this will do for now.
(From OE-Core rev: 5d2b0816a92965cdbbb2dca5d3009fbd5064b9ca)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the usual way this is handled in desktop distros (see debian, gentoo).
I wasn't able to track down a patch to add proper x32 support to ffmpeg. There
was, however, a libav patch series which may be worth investigating.
(From OE-Core rev: 94bfdb0accab0a2638e3bea1271cb80596f38e00)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The included libav lacks support for x32, so disable the assembly
optimizations.
(From OE-Core rev: 7bac614503d0d9fda03b087501690e5f8262d966)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
boost was adding -march/-mcpu itself, and adding -m32/-m64 itself as well.
Patch that behavior out, apply another similar patch from elsewhere, and
adjust BJAM_OPTS to fix the x32 build.
(From OE-Core rev: 2dc30ad281b625e0c4f2437879bce58245aa45b1)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use the correct time() definition with time_t rather than a long,
since long is 32-bit on x32.
(From OE-Core rev: 520cee660efa60e44dbf004a617c130597be6cae)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're targeting the x86_64 EFI ABI.
(From OE-Core rev: 24325410acb670a3e7bc626ac3607efa8df38dc5)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ordinary 64-bit binaries are expected for the bootloader.
(From OE-Core rev: 688a79b720044dd9fca3e95ff3d172252fba1e7a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
valgrind doesn't seem to support x32 at this time, even in current upstream.
(From OE-Core rev: 0203ae47dacc1a4b37007062f962fa8d4bd602e2)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
valgrind doesn't support x32 at this time, so skip it for that host.
(From OE-Core rev: b0764fc58e2ebe0555b71392a6fd177ecfd0be66)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream have removed the file from zlib.net as a new version has
been released, switch to fetching from the official sourceforge
mirror.
[YOCTO #10879]
(From OE-Core rev: bb99e4a620efd59556539c156cd98ea23aae74c8)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream has started using automake which means that the recipe must now
inherit from autotools and pkgconfig.
The source tree has been reorganised too which requires the paths in the
patches to be modified. None of the patches appear to have been applied
upstream.
(From OE-Core rev: dacf6ab5aaf8cc588280b92d64db2e28c6c07a22)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original configure script detects the header files
of openssl to set variable like 'HAVE_OPENSSL_AES_H' in
config.h and ignore the value of '--enable-openssl', this
may cause inconsistent build.
(From OE-Core rev: 17e34c083aa53914610d8eca2341e82d0e1208e2)
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing NSS on a read-only rootfs, the current postinstall
scriptlet exits after having run the signing part. This causes an error
when appending the task because the rest of the script is simply ignored
and therefore never run.
(From OE-Core rev: 8f782f7095e718dd9452055af53363beb6bdbece)
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Juro Bystricky
Randy Witt
Alejandro del Castillo
Chen Qi
Khem Raj
Ed Bartosh
Ross Burton
Alejandro Hernandez
Scott Rifenbark
Martin Vuille
Richard Purdie
Robert Yang
Denys Dmytriyenko
Christopher Larson
Joshua Lock
Mike Crowe
Haiqing Bai
David Vincent
Oleksandr Kravchuk