If '*' does end up in mirror urls accidently, some strange things
can break since supports_checksum() looks for this, ud.localpath can
then get ignored and this can lead to empty directories being downloaded
"successfully". '*' is a special case for file urls only at this point
so remove any entries that accidentlly make it in through url mapping.
(Bitbake rev: 1369bec2404d942acc3618a8d005ec6868dcfd41)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_ and LANG no longer need to be preserved from the external environment.
The value of _ changes between non-pseudo-wrapped and pseudo-wrapped
invocations (e.g. between "bitbake -p" and "bitbake target") and this
will currently trigger a full reparse in the absence of a whitelist
entry in BB_HASHCONFIG_WHITELIST, which is not ideal.
LANG used to be preserved in order to ensure the C locale was being
used for tools invoked by bitbake, however we now set LC_ALL in
bitbake.conf to take care of this.
Second part of the fix for [YOCTO #2600].
Acked-by: Jason Wessel <jason.wessel@windriver.com>
(Bitbake rev: 1c531dff2fb055ecab2d462027eecec3fabc2a44)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When writing mirror specifications, the current regexp syntax can be awkward
and hard to get it to do what you want. For example, extracting the 'basename'
of a repository:
PREMIRRORS = "git://.*/([^/]+/)*([^/]*) git://somewhere.org/somedir/\\2;protocol=file"
can now become:
PREMIRRORS = "git://.*/.* git://somewhere.org/somedir/BASENAME;protocol=file"
which is much clearer. A MIRRORNAME substitution is also added which contains
an encoded form of both host and path. One of the problems with the existing
regexp syntax is you couldn't access HOST information from PATH and vice-versa
which is an issue this patch also addresses.
Tests for the new syntax are also added.
(Bitbake rev: c6b1acbad7b3d2698530eb8b5249adb4ab95da21)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we build the mirror urls, its possible an error will occur. If it
does, it should just mean we don't attempt this mirror url. The current
code actually aborts *all* the mirrors, not just the failed url.
This patch catches and logs the exception allowing things to continue.
(Bitbake rev: c35cbd1a1403865cf4f59ec88e1881669868103c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two problems with the _logged_communicate that are both
caused as a result of buffering I/O issues:
1) log truncation when python fails
2) While a bitbake task is running it is impossible to see what is
going on if it is only writing a small incremental log that is
smaller than the buffer, or you get only a partial log, up until
the task exists. It is worse in the case that stderr and stdout
are separate file handles, because previous code blocks on the read
of stdout and then stderr, serially.
The right approach is simply to use select() to determine if there is
data available and also flush the log before exiting.
This is based on a patch from Jason Wessel <jason.wessel@windriver.com>
with some changes to flush upon exit, abstract the non blocking file
descriptor setup and drop the buffer size parameter.
(Bitbake rev: 361fb71e907aa84c28ecec79fefc6ca39c39172f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently its not possible to add arbitrary RDEPENDS to a specific task.
This can be useful and this patch adds functionality equivalent to the
'depends' task flag.
(Bitbake rev: db65080a6199baecc5c422294a4c4a9fd12dc29e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -l is specified and the source and destination are not on a common
filesystem an error occurs. The -l option is however the default for
git for local paths which the fetcher already now ensures in the
file:// case.
We can therefore safely drop the -l option.
(Bitbake rev: 3aeb268b2aaab4bb8b1cfff1450e0b76aa8ce855)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log a note when applying a taint to a task signature (e.g. when using
the -f or -C command line options) so that the user knows this has been
done.
(Bitbake rev: 0fd960fdea83874eedb541cbc2920257e0f3fb81)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
What is specified is a command (or "cmd" as in the help text for -f)
rather than a task - i.e. you specify compile, not do_compile, so change
the sentence to reflect that and reorder it slightly so it makes sense.
(Bitbake rev: 9ab269410ef5cd4753fe11ec74759f421685bb7b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This switches to use the hash based signature generatior and update
layout_abi to match stamp file layout changes.
Angstrom and Poky did this a while ago. This brings the OE-Core defaults
into line with what is the best common practise at this point. Its been
discussed on the mailing lists and by the TSC at length, this just completes
the transition.
(From OE-Core rev: 4199efed48005a62267fa3374c33b13627d85f44)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit fixes the guile compilation segfault on MIPS/PPC.
Tested by compiling guile with MACHINE=qemumips.
[Yocto #2478]
(From OE-Core rev: e2cc4a44d510e0d473d15f207c1c886db6a5ccf7)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many apps want to use the full GNOME icon theme and install it, but if our theme
doesn't inherit it the the icons are not available.
(From OE-Core rev: bece29110ead367fe501641ec83251e5f87f2430)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A file:// url should use "clone -l" to greatly speed
up the clone in the case of a kernel when it is local.
(Bitbake rev: 2bab2cc3ffe67ee2a308074a6e4c2c7be5636d2f)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 2149]
Use the new progressbar in Hob, so that we can reduce the maintenance
burden of the multiple GUIs.
(Bitbake rev: 6c0da26adbdcaa0c56737bacddb61678a9095e32)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For mirror mapping, we never use regexps for the type component of
the url. Doing so causes various slightly bizarre behaviour such as
https:// urls being translated to files:// urls which we have no handler
for. This patch forces the type matches to be direct, not regexp based
and gives the expected bahvriour.
(From Poky rev: 695d8aca0999d2d61970b990e83c3132ba6f12cb)
(Bitbake rev: 604df1b25cf114e083f52917df2df64e01279c25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ud.localpath as a basename when it points at a directory causes
problems. The supports_checksum() method gives a good indication of whether
ud.localpath can be used in the way we need.
(From Poky rev: 933ec8a44634e33f92f6f76de3a34094c3d63aa6)
(Bitbake rev: dcd79ae20ab2c72c3312b2251c2b6dc4cabe988e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only consider mirror tarballs when the source and target urls are of
differing types. We also should clear all url paramters when handling
mirror tarballs.
(From Poky rev: da140b8b0b3dda5429f9eee68829ef5247cdfe12)
(Bitbake rev: 7619dcad29a6c2405b15a8fbadfa11e81b399ae1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means that parameters in the source expression are used as part of the
match. Parameters in the destination are used explicitly in the final
url.
(From Poky rev: c465cb0c5c927dd41d96ad6d6fa1566349574bb7)
(Bitbake rev: 3c468ac3ed6d045561afce19b85ae9dd18d87cea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we only consider one pass through the mirror list. This doesn't
catch cases where for example you might want to setup a mirror of a mirror
and allow multiple redirection. There is no reason we can't support this
and the patch loops through the list recursively now.
As a safeguard, it will stop if any duplicate urls are found, hence
avoiding circular dependency looping.
(From Poky rev: 0ec0a4412865e54495c07beea1ced8355da58073)
(Bitbake rev: e585730e931e6abdb15ba8a3849c5fd22845b891)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With support for things like git:// -> git:// urls, we need to be
more explicity about the mirrortarball check since we need to fall
through to the following code in other cases.
(From Poky rev: 28e858cd6f7509468ef3e527a86820b9e06044db)
(Bitbake rev: a2459f5ca2f517964287f9a7c666a6856434e631)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are no functionality changes in this change
(From Poky rev: d222ebb7c75d74fde4fd04ea6feb27e10a862bae)
(Bitbake rev: db62e109cc36380ff8b8918628c9dea14ac9afbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This assists with build reproducuility. It also avoids errors if cwd
happens not to exist when we call into the fetcher. That situation
would be unusual but I hit it with the unit tests.
(From Poky rev: 86517af9e066c2da1d580fa66b7c7f0340f3403e)
(Bitbake rev: b886c6c15a58643e06ca5ad7a3ff1f7766e4f48c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new command line option forces the specified task and all dependent
tasks up to the default task to re-run. This means that the following
single step:
bitbake -C compile somerecipe
is equivalent to the following two steps (with the recent change to -f):
bitbake -c compile -f somerecipe
bitbake somerecipe
Note that to work this option needs full hashing enabled (i.e.
BB_SIGNATURE_HANDLER must be set to a signature handler that inherits
from BasicHash). If this is not the case, -C effectively does nothing.
Based on a previous implementation of this option by Jason Wessel
<jason.wessel@windriver.com>.
Implements [YOCTO #2615].
(Bitbake rev: 2530e0faada5775897cfd1b93aba6925826dca73)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -f is specified, force dependent tasks to be re-run next time. This
works by changing the force behaviour so that instead of deleting the
task's stamp, we write a "taint" file into the stamps directory, which
will alter the taskhash randomly and thus trigger the task to re-run
next time we evaluate whether or not that should be done as well as
influencing the taskhashes of any dependent tasks so that they are
similarly re-triggered. As a bonus because we write this file as
<stamp file name>.taskname.taint, the existing code which deletes the
stamp files in OE's do_clean will already handle removing it.
This means you can now do the following:
bitbake somepackage
[ change the source code in the package's WORKDIR ]
bitbake -c compile -f somepackage
bitbake somepackage
and the result will be that all of the tasks that depend on do_compile
(do_install, do_package, etc.) will be re-run in the last step.
Note that to operate in the manner described above you need full hashing
enabled (i.e. BB_SIGNATURE_HANDLER must be set to a signature handler
that inherits from BasicHash). If this is not the case, -f will just
delete the stamp for the specified task as it did before.
This fix is required for [YOCTO #2615] and [YOCTO #2256].
(Bitbake rev: f7b55a94226f9acd985f87946e26d01bd86a35bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is important that the environment uses a host gcc when running the
adt installer. I put some text in noting that.
(From yocto-docs rev: 7f63662913d6d79843e1bdcadc49bb120bb72688)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor typoes in first couple chapters
(From yocto-docs rev: 36618cc6a261a994b00c5c524c76cbf3952a2eae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sections describing how to debug remotely and how to use the
oprifiler have been deleted. these sections are now in the YP
Development Manual.
(From yocto-docs rev: 5f277a38a7afe1cc06eafe2ef1b07cc24c8ec546)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the sections on remote debugging and using the profile out of
the YP Reference Manual and into the YP Development Manual. These are
now two sections in the "Common Tasks" chapter.
(From yocto-docs rev: 42640bf69aa05c56eb112c10b6d7b96069173785)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, xinetd cannot start if no service enabled.
# /etc/init.d/xinetd start
# ps aux | grep xinetd
# cat /var/log/syslog
xinetd[862]: 862 {init_services} no services. Exiting...
So add -stayalive option by default, as most distos do.
(From OE-Core rev: 53b6da085bfa78885f68b5d7db40d8c4e3f2f5bb)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 17084891c0aa9114805f022ea185108e834e4fcd)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to recommend Python as it isn't used, and specifying the connman plugins should be done by the image.
Add a dependency on connman itself as otherwise connman-gnome doesn't do much.
(From OE-Core rev: f399346a1806385458536a8401a48fbeeaf64d24)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patches that have been merged upstream, or are not relevant any more.
License checksums changed because the (C) years were updated.
(From OE-Core rev: d7e7d38a2beded17937e330adf4edb89807bfdd4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wifi, bluetooth and 3g used to be plugins so were packaged separately, but not
anymore.
(From OE-Core rev: be2ce372863ef56a33ad4e4d4ddeec22873a6b8b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dnsproxy and ntpd don't exist anymore, and the client is almost entirely useless.
(From OE-Core rev: ed328572c7c286ecc2b27bb89eb8d795eda9bb8c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Paul Eggleton
Bogdan Marinescu
Ross Burton
Saul Wold
Jason Wessel
Kang Kai
Scott Rifenbark
Robert P. J. Day
Valentin Popa
Xin Ouyang