And rebase the patches to the newer source code
This patch is upstream hence deleting it from the recipe.
binutils/110-arm-eabi-conf.patch
(From OE-Core rev: 715bcfe3701e5ee3e12ee4af9c868a9bbf441525)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Patch to disable the XML::Parser check in the target
intltool.m4, this check will find the host (not native)
XML::Parser if it's installed possibly causing Host
contamination, but will also fail configuration if XML::Parser
is not installed on the host.
Since we know that XML::Parser is installed on the image, we don't
really need this check, so comment it out.
From RP in mail thread:
> If the recipe needs perl for
> some other reason than intltool, it needs perlnative but it if only
> needs perl for intltool, we shouldn't need the dependency. The .m4 macro
> checks are well intended but don't fit the way we use perl. I really
> don't want to end up in a position where intltool automatically means we
> have to add perlnative as a dependency and we've previously seen many
> problems related to that.
(From OE-Core rev: 264fb6c5a4875cd8969a24a9f0301ed916ab827b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch introduces a distro feature which enables gcc to produce
both 32bit and 64bit code, and enables binutils to operate on both
32bit and 64bit binaries. It differs from multilib toolchains in
that it does not require to compile a version of the libc for each
architecture variant. However, the code produced for the secondary
architecture will not be linkable against the libc.
v2: - Renamed the feature name from "biarch" to "multiarch". The GCC
installation manual claims that the mips-linux can be made a tri-arch
compiler (http://gcc.gnu.org/install/configure.html)
- For x86_64, the compiler is made bi-arch by default, so nothing
has to be done in particular.
- I analyzed the gcc/config.gcc from GCC sources and added in this
patch all the architectures that could be made biarch with the version
of gcc currently used in OE, which are powerpc, and sparc, in addition
to x86. mips and s390 will probably be supported in future versions of
gcc. For x86 and sparc, only the --enable-targets=all option is valid
to make this work (this option doesn't have any other side effects than
making the compiler bi-arch). For powerpc, I used the
--enable-targets=powerpc64 option (although 'all' also works).
Note: - Untested on powerpc and sparc. But I believe it works the same
as with x86.
- gcc in meta-toolchain is also made multiarch.
(From OE-Core rev: 99e295ef30ba02db3966c66619807c037ef5089f)
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a patch unixccompiler.patch where we try to throw away
everything except first element of CC string but this does not
work if gcc is prepended with something e.g. CC="ccache gcc"
then the logic fails and it ends up in some modules failing on
you silently (_sqlite3) in my case.
The fix here is to drop basename so we keep the whole
string as it is and then the detection function searches
for gcc string in the whole CC. This works in both cases
one the original intent of the patch and the second described
above. One place where it will fail is if someone has non-gcc
compiler installed in some subdir which has gcc in it e.g.
/usr/gcc/fakecc but for OE this should never happen. Ideally
the the detection logic should have tried to execute gcc
and then parsed --version output or something.
(From OE-Core rev: 9b13b9024d24953dedb35f62d3d8b06a29036992)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When I was trying self-hosted-image, eglibc's do_install failed in the target:
ERROR: cannot stat bootparam_prot.h:
the cause is: rpcgen doesn't work properly: rpcgen can't exec /lib/cpp since
it doesn't exist.
According to http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/lib.html:
"if a C preprocessor is installed, /lib/cpp must be a reference to it, for
historical reasons. The usual placement of this binary is /usr/bin/cpp".
Typical distros, like Ubuntu, openSuSE, Fedora and RHEL, all comply with
the rule.
Actually in meta/recipes-devtools/gcc/gcc-package-target.inc, we do try to
package ${base_libdir}/cpp:
FILES_cpp = "\
${bindir}/${TARGET_PREFIX}cpp \
${base_libdir}/cpp \
${libexecdir}/gcc/${TARGET_SYS}/${BINV}/cc1"
But unluckily we didn't create a symbol link in do_install.
This patch adds the symbol link.
(From OE-Core rev: 58fb9fbce2af05a469691390e75aebb2de16ca96)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1174]
Rpm logs will grow indefinitely, so change the config to flush those old logs.
(From OE-Core rev: e2c4dff079722f256ddcab9630b5b3f8f6421cc9)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no point in having "executable" binaries in the .libs
directory linked with different rpaths to the target which
could concivably be run on the build system when cross compiling.
This patch removes the extra rpaths ($compile_rpath) so that the
output from the "link" stage can be used on the target. We can then
avoid having to "relink" during the install stage.
This saves some build time (do_install is over 2 minutes faster for
pulseaudio).
This patch also removes an annoying "seems to be moved" warning
which is totally bogus in the sysroot case.
(From OE-Core rev: 0a1dedeb8eea4e230b47d1516b3e6e90495fe49d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
apt wasn't building on modern libc/compiler combinations due to missing
header includes.
The libcpp version was also being hardcoded, this patch generates it
dynamically to work on different host systems which no longer have
this.
(From OE-Core rev: ca8237ee51053d70b5e7579c224a824db2be76b2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport fix for PR 47551 fixes the ICE seen on armv7-a/qt4-x11-free
Bump up SRCREV past gcc 4.6.2 release
(From OE-Core rev: dd2fdf9f5a3923c37e4ea2e46e347bb0657c2f5b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should be using libtool-cross for cross compiling but
were not. This patch sets datadir so libtoolize ends up
containing correct paths. It then installs libtoolize.
The path ltmain.sh was installed to was incorrect and this is fixed.
We also now install all the libtool m4 macros and config files.
(From OE-Core rev: d52bdbee35bb6edc55eed613f869e46d0c0a2f31)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all the upstreamed and not needed patches.
(From OE-Core rev: 2f7b3710d2879ae55ec7e5d0b11958a29cfe96e5)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg-native's update-alternatives is broken for offline work so
don't install it.
Also list update-alternatives in the multiprovider whitelist to
avoid unwanted multiple provider warnings when multiple package
backends are enabled.
(From OE-Core rev: 300336fc4a310ed16a14ad041744708d54aae189)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: da7bf75bcdd5759a0f551dcb7a0326aa2f40921c)
Signed-off-by: Michael Brown <Michael_E_Brown@dell.com>
Port patch from base openembedded. Since 4.6 already has fixes for config.gcc,
the fix only requires a one line change to gcc-cross4.inc.
The patch was imported from the OpenEmbedded git server
(git://git.openembedded.org/openembedded) as of commit id
3aa8afe97e9cf1340feb9c4442a6ed88b7e32c96.
gcc-4.5: Fix toolchain builds for SH4/SH3
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a yoctoproject.org based tarball since gnu-config is required very
early on in the native build process, we do not want to rely on git, which
can cause a circular dependency issue.
(From OE-Core rev: 63fbf7dffb07c9adc3e4fbb504dcb81ea335e859)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Licence has update timestamp and Copyright year.
This change needs a coresponding change to ASSUME_PROVIDED
to add git-native
(From OE-Core rev: b6c2631209181f43bbe54bb41b0a668f5b9e1383)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* intentionaly with negative D_P, bitbake fetcher should be improved to
detect old checkout with newer subversion available or vice versa and
do svn upgrade automaticaly or show better error, but subversion as
client for target or -native for distributions which explicitly say
they want 1.7 (with PREFERRED_VERSION) can be available already from
oe-core.
* be aware that checkouts from 1.7.0 are not compatible with older
subversion clients (ie when builder populating distro PREMIRROR is
using 1.7.0 all builders need to have also 1.7.0)
* and also 1.7.0 client needs to call svn upgrade in checkout first in
order to use it (so if PREMIRROR has tarball from 1.6.x it won't work
on client using 1.7.0 unless fetcher2 is improved to detect this and
call svn upgrade)
* tested on SHR distribution
http://wiki.shr-project.org/trac/wiki/Building%20SHR#subversion1.7inshr-chroot
* only missing part is to add subversion-native dependency, so that
native subversion is built, before building ie elementary (because EFL
are using svnversion from configure.ac to detect source revision and
.svn dir needs to be from compatible version).
* read http://subversion.apache.org/docs/release-notes/1.7.html
(From OE-Core rev: d092efd48d831c762747d2f6e1c6018402c3ee0f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The version of dpkg the updates-alternatives-dpkg recipe pointed
at no longer used a perl script but a compiled binary. This meant
the "all" architecture field was invalid, as as the sed operation
during do_patch. All things considered the separate recipe was
pretty pointless.
This patch moves update-alternatives back to being built as part
of the dpkg recipe. It also moves various functionalty to the .inc
file which it belongs and fixes building and packaging of the dpkg
perl modules.
(From OE-Core rev: fad496c759066d53bebf9b8cebc63e6478c91d19)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This path should be valid for a longer time, as only the current
release stays in main directory.
(From OE-Core rev: 4013de36a60b8f69f04e58cf5751efaf0d26d5ea)
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When extracting packages onto the target system in particular, we
really want to ensure the name fields in the tarball are used over
and above the numerical uid/gid values. This patch adds this
functionality to opkg and ensures package upgrades work correctly
permission wise.
(From OE-Core rev: f2316ff39670ed99382411e15ac035550360fbdd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1755]
We change the want the RPM rootfs install works to install pre and post install
scripts. The new method uses a script helper that is invoked by RPM outside
of the normal chroot.
The wrapper is dynamically generated prior to the install starting. It will
check the return code of the script. If the script fails, it will store a copy
to be executed on the first system boot. This is similar to the previous
mechanism.
In addition, a line of debug was added to the scripts as written by package_rpm
to list which package and which script for later debugging, if necessary.
(From OE-Core rev: 3e7120d6a9fd5e46214673d0a6e1085a7314ff42)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 23d2eaf9 ('skip setup.py 'import check' when cross-compiling')
neglected bumping the PR, this adds it.
(From OE-Core rev: 87f42a7f899ecaba8ca8d11c09752b6019feb9d5)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've had the check for dash as /bin/sh for a long time. Dash has been
around long enough now that most major issues have been identified and
fixed from build perspective.
This patch fixes a bashism in the openjade-native recipe. It also
adjusts libtool so that the header at the script is used and not the
value of $SHELL. This is because many Makefiles change $SHELL so dash
can get used to execute what is otherwise configured as a bash shell
script. Since we don't need to execute scripts this way on any system I'm
aware of us building upon, the simplest fix is just to remove $SHELL.
With these two changes the dash check can be removed and we can allow
builds with dash as /bin/sh
(From OE-Core rev: 07ded02ffd37b4fe60a6210dbf56490ea306f0b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Note: I know I need to add the description of the libtool change above
into the prefix.patch]
build_extension() in setup.py, as part of the build process, does an
'import check' on the built extension. The import check in turn
dlopen()'s the shared library associated with the extension, which
isn't something that makes sense if that library was cross-compiled
for a different architecture.
This was noticed with an x86_64 target that was compiled with avx
support, because it caused 'illegal instruction' exceptions:
| /bin/sh: line 1: 14575 Illegal instruction ... -E ./setup.py -q build
For other target architectures, it doesn't necessarily cause illegal
instruction exceptions, but still fails. For example, on arm, the
failure pathway causes this warning:
*** WARNING: renaming "cmath" since importing it failed: .../cmath.so:
wrong ELF class: ELFCLASS32
This patch to setup.py and the associated recipe changes allow the
whole 'import check' logic to be skipped when cross-compiling.
(From OE-Core rev: 25fae81538a92e15eab3fc169ebce44505f67839)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a new feature, PSEUDO_UNLOAD, which can be used to eliminate
overhead of LD_PRELOAD when no longer necessary.
Also the, clone(2), support on Linux has been updated to resolve some
potential defects in the previous implementation.
(From OE-Core rev: 77fe9dd8fa0393132ac6aba00d5659c6781fbbde)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* move 2to3 to separate package and include lib2to3 (was in python-misc)
* fix pattern for python-unittest (was in python-misc because it's in subdirectory now)
* add pydoc_data to python-pydoc (was in python-misc)
* add more stuff to smtpd, audio, codecs, ctypes, html, io, json, mime,
pickle, stringold, xmlrpc
* move all FILES_ details from python recipe to manifest generator so it's in one place
* added manual line break in FILES_${PN}-core, because git send-email
doesn't like too long lines
$ git send-email -1 dfaae65839f0ab23e5b2ae2a68df0f370bca84d2
fatal: /tmp/k8zbDajUNP/0001-python-improve-packaging.patch: 64: patch contains a line longer than 998 characters
(From OE-Core rev: f17f6b28ed2f62250f8690617e9126a43c3a8020)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When analysing our build performance, its apparent that binutils-cross
takes an age to get built. This is due to its dependencies on
flex-native and bison-native which in turn depend on gettext-native.
gettext-native is problematic as it has a significant dependency chain
of its own and takes an age to build. What is worse is that we never
care about the native language support in -native and -cross packages
since we always force the C locale.
This patch therefore disables nls for all -native packages (its already
disabled for -cross) and adds a new gettext-minimal-native package which
contains the m4 macros to keep autoconf/automake happy.
This means we gain a significant build time speedup by the removal of
gettext-native from most dependency chains (only being part of gettext
for the target now).
For now the LICENCE field says GPLv3, the macros are actually under a
FSF MIT like licence so we need to update this part of the patch in due
course.
(From OE-Core rev: 01b2a16beb4a924077b74943ad4d6e7976563ff1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mke2fs.conf, which contains defaults for filesystem formatting options,
ought to be shipped along with mke2fs itself.
(From OE-Core rev: 8153b037411905e141350cc28f4351e21219a536)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* -L. is needed to find right libpython
* -L${STAGING_LIBDIR} is needed ie for python-zlib to find right zlib
(From OE-Core rev: dac48ff1192cd6e4d39aa6e1696e91336d371d97)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it needs to be regenerated to actually package something
(From OE-Core rev: 0a4ac566987950815fc1ae8a0ec0496bd42a46ed)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebased these patches to the newer code
modified: python-native/nohostlibs.patch
modified: python/01-use-proper-tools-for-cross-build.patch
modified: python/06-avoid_usr_lib_termcap_path_in_linking.patch
modified: python/06-ctypes-libffi-fix-configure.patch
modified: python/multilib.patch
Deleted these patches are the are now upstream
deleted: python/02-remove-test-for-cross.patch
deleted: python/security_issue_2254_fix.patch
Added this patch to python-native
new file: python-native/multilib.patch
Updated site config file for python
modified: ../../site/common-linux : add ac_cv_have_long_long_format for python
avoid this error in python:
Include/pyport.h:243:13: error: #error "This platform's pyconfig.h needs to define PY_FORMAT_LONG_LONG"
Updated default python version
modified: ../../conf/distro/include/default-versions.inc
(From OE-Core rev: b284e9a512860b8a8380be80f96cebce6b92ff80)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Got errors that we were unable to find -lreadline, this fixed the
issue
(From OE-Core rev: ddc9a58b8553599d2328ac1c4449b41681ae45d1)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this isn't probably complete list.. just what failed here
(From OE-Core rev: f586aaa8d00361a9597a546d665077c75cf4d520)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix is needed for gold to work. Otherwise
connman fails to build since it used hidden weak
symbols.
See
http://gcc.gnu.org/bugzilla/PR32219http://www.cygwin.com/ml/binutils/2008-02/msg00239.html
The fix proposed to gcc had reviews which were not addressed hence the
patch is not yet
applied to gcc upstream.
connman can also have workaround by changing the visibility of these
symbols to be default
__attribute__ ((weak, visibility("hidden")))
to
__attribute__ ((weak, visibility("default")))
in include/plugin.h
(From OE-Core rev: 3cb2b003db7371b3a47d02c08352a262e1e419b4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
parallel build fix patches are not needed as they are upstream now.
Got a new set of debian patch set for 5.14.2
perl-rpdepends: fix the autogenerated rdepends mistakes
take out some mdoules which are not going to be built.
[Saul Wold: Remove debug]
(From OE-Core rev: 8dc5f118832a4aca906239ffed82f72497c37f8e)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update ccache to 3.1.6 from 3.1.5.
(From OE-Core rev: e3d3c30f7ce7461290923a2b490e690ff5d166bc)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update liburi-perl to 1.59
(From OE-Core rev: b3cbb5a8e8aeeb3a55649dba1aca73595305309e)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the LICENSE.txt has added 2011 year to the copyright line he nce the MD5 sum is different.
(From OE-Core rev: bd34ca3f4912cf957fb3b46c31c757d284dfc4c7)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ccmake fails to build due to an as-needed type error with -ltinfo. Disable
it for now since the build fails and cmake is what we need for target
sdk.
(From OE-Core rev: 2adc9a3f1f1db284f7d91193ad77b3524e0e0d2c)
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This way autom4te uses m4 as it finds it in the PATH, rather than
hardcoding any particular path.
(From OE-Core rev: fd6c84249b7bbb5f51d829cf96cae52fe88f456c)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
and nfsroot mount without the need to talk to an RPC info
server as long as the port numbers for mountd and nfsd
are known in advance.
This patch updates the qemu startup scripts and the
user mode NFS server to have the ability to start
without the need to use rpcbind or portmap services.
(From OE-Core rev: 3b1346c607c41a2d592c48594457c32153cb2314)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We force the C locale when running builds for determinstic error messages. We
therefore have no need to NLS support in binutils cross or gcc cross.
We also don't need the standard base/autotools dependencies for our
toolchain components since we don't autoreconf these.
This patch turns off nls and cleans up some of the dependencies resulting
in a slightly less convoluted set of build dependencies.
(From OE-Core rev: 54a3e2ee37003fc56af0339f857b0b6442790c26)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These packages need these deps for the RPM generation stage:
error: Failed dependencies:
| /usr/bin/python is needed by nfs-utils-1.2.3-r2.ppce5500
| /usr/bin/perl is needed by util-linux-2.19.1-r4.ppce5500
| /usr/bin/perl is needed by strace-4.5.20-r2.ppce5500
(From OE-Core rev: 9c9ea24b115a9bb87df1323b5f185ce426262aec)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
currently we have allarch type of recipes, which may still have
architecture dependency, like x11-common. So we need to drop the
handling to allarch in multilib case.
Also remove the PV postfix in python-pygobject DEPENDS, since multilib
code will treat a native package multilib capable.
[YOCTO #1497]
[YOCTO #1498]
(From OE-Core rev: 64c0279e6b0d2325a326058476228360898550f3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm-native was reading from /usr/share/misc/magic which is wrong
it needs to be set to read from the sysroot. This also adds wrappers
to the rpm-build tools to ensure they know were to find the macros that
point to the right directories.
Fixes [YOCTO #1532]
(From OE-Core rev: e94d1e7ac1b7952690c37554e618f84b84e561a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depending upon what hash style is in use this uses
the right flag for setting the hash style type. This
fixes the QA errors about missing GNU hash style reported
in gcc-runtime build particularly libgcc
(From OE-Core rev: f8edd9b872bcf14da037bd0b501ccc8c6fcc79bf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes two QA warnings:
a) Debug files being contained in the main package (by adding
an appropriate FILES expression)
b) Stop hardcoding the RPATH in the nativesdk case since our
path is on the loaders default search path
(From OE-Core rev: 1577975202437f8f89ef24a5e4d3f6c6c8a88c5c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
a) There is a QA warning from a .so being present in a main package.
In the case of the plugin library for gcc, this is allowed.
b) Remove the unwanted libiberty.a file with the strange path. We
don't need/want this and this removes an unpackaged file warning.
(From OE-Core rev: ca36a3edf9cede9fa0d73ba1a9538ab467cb5e3c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First, this lib is usefull for coverage analysis-enabled building.
Second, this fixes the warning about unpackaged files in libgcc recipe.
(From OE-Core rev: 2a807a98d8be3f486e703321773db32657c71d9e)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Long time ago a066e7ca90a28d5681c5fa895a29e999ed7c88b was committed to
address possible problems with compilation of nscd during
eglibc-nativesdk build. Problems were related to the way gcc searches
for headers to check if it should enable it's own stack smash protection
bits or it can relay on eglibc for it.
However after 934d38530c9a67562e53d4034aee5531f0f26750 things got
broken, as for gcc-crosssdk-intermediate packages:
1) EXTRA_OECONF is ignored
2) headers are installed in a different location than expected by that
patch.
This results in eglibc-nativesdk build broken on some systems (e.g. mine
Debian x86_64 squeeze). Fix that by providing with-headers options to
crosssdk-intermediate gcc configuration.
(From OE-Core rev: 63494d638b7a9b88a5b7d7a02d2afcb3aa0fa064)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no point in downloading a tarball with no clear upstream (other than
icecc itself) and then patching it. Rather put new script in the source tree.
(From OE-Core rev: 409fa8ca4d37ad407faaa2a8935e9d2bb89776c9)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libtool was being to aggressive in adding rpath to binaries. This
change stops it adding them if that path the default search path.
(From OE-Core rev: 99d1e3ee56c326b3ab68913e68d133a63f334696)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1514]
Without a native dependency on libxml-parser-perl-native,
shared-mime-info-native can fail its do_configure task.
checking for XML::Parser... configure: error: XML::Parser perl module is
required for intltool
Testing: Successfully built shared-mime-info and shared-mime-info-native for
qemuppc.
(From OE-Core rev: 51b1df89828e677232e125181209b26d3c5ec928)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Joshua Lock <josh@linux.intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
CC: Koen Kooi <koen@dominion.thruhere.net>
CC: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some scripts are necessary to develop programs with libcom_err and
libss. Include those into e2fsprogs-dev package.
(From OE-Core rev: 46332c2313abb273f6fc889fac4daa91cf43faa3)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
icecc-create-env(-native) is a native package. But if it doesn't have
the -native suffix, some dependency tracking stuff in oe-core (in
nativesdk.bbclass) get's crazy about it, trying to generate dependencies
to icecc-create-env-native packages. To fix that simply add -native
suffix to this package.
(From OE-Core rev: 83f9ebe9afb8bec4531899f8001a585c974e1db4)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default cgi.py attempts to use /usr/local/bin/python as its
interpreter. However, on my Linux systems, including OE-Core,
python is installed into {bindir}. Adjust this one file based on
the comment at the top of the upstream file.
This resolves an issue where a runtime dependency discovered during
RPM packaging breaks the rootfs construction.
(From OE-Core rev: 1da01664963b9c6a6df171dcd0fbb1406544035b)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A small number of target installed programs, "${bindir}/pod*",
were incorrectly using the perl-native paths to access perl. This
caused a dependency failure during RPM rootfs install, and also
prevented those specific components from functioning.
(From OE-Core rev: 7b8db36e088e3e9cd585e8d8dde1c1c2860c3c2e)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously python dependencies were of the format "python(abi) = ..."
This format is not yet supportable within OE, so revert to a form
we know we can handle.
Introduce a change to package.bbclass that ensures it will causes the
sstate-cache's "package" to invalidate. Since pythondeps changed, the
output of rpmdeps changes, which causes the per-file dependency
information to change.... thus we need to invalidate the cache!
(From OE-Core rev: 30064a98dc9049db4a37f119d15fbb59aa3c8377)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
IceCC needs tarballs with toolchains to work correctly. This is a
version largely based on one from org.openembedded.dev, plus a patch to
support recent compilers, LTO, etc.
(From OE-Core rev: 49d25ab464e0e02bb910a75791077b1393d22b6e)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* upstream detection seems to be doing its job right now
* I don't see how this is supposed to work
-- neon_config="$withval/bin/neon-config"
-+ neon_config="env env PKG_CONFIG_PATH=${withval}:${PKG_CONFIG_PATH} pkg-config neon"
when neon_config should be sysroots/nokia900/usr/bin/crossscripts/neon-config
"
(From OE-Core rev: 6466de31048260089b8988280f77efdb14ac2f21)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1473]
From the upstream cross prelink respository:
Fix printf typecast problem
Without this fix the printed TLS(...) information is incorrect, which
causes the core prelinker code to incorrectly prelink. This bug triggers
primarily on x86 (32-bit) hosts, targeting x86 (32-bit) targets and arm
targets.
(From OE-Core rev: 2fc778068ebbd97b0fb473fb35a3eca03da86542)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1070].
The pkg_postinst_dpkg seems buggy, e.g., for dpkg-native,
${IMAGE_ROOTFS}/${sysconfdir}/rcS.d doesn't exist.
I think OE's version(do_install_prepend) at
http://git.openembedded.org/cgit.cgi/openembedded/tree/recipes/dpkg/dpkg.inc
is correct, so let's change to OE's version.
And, bth dpkg and update-alternatives-cworth supply
/usr/bin/update-alternatives and this causes conflict. e.g., bug 1070.
We can resolve the issue by ask dpkg not to supply the binary.
(From OE-Core rev: c7af358ec427487ccc053316d2f68f6121b97181)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This relocation issues caused following bug and introduce one partial fix bb024d:
[YOCTO #1440]
But the environment val hacking is not working all the time, as nsgmsl may
append wrong path in some case. This fix use search directory "-D" as solution.
And more important, change the iputils' way to make doc: Use the sysid in
current directory instead of parent directory, as "../" is also appended to the
search directory then lead searching failure.
(From OE-Core rev: a5aeb873b943300e18493031ffa9e9f8ab56c2d2)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
CC: Saul Would <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch causes the linuxdoc-tools-native to fail, cause it's
overriding the SGML_CATALOG_FILES, need to find a better way to
set the CATALOG_FILE information for opensp / nsgmls
(From OE-Core rev: e9ecf5f22b5aa1f58b3104f7d058d04ab08e8839)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
This reverts commit bb024d7a8c.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add link for python2 as some configuration tools search from a python2
and could find the host python instead of the python-native.
(From OE-Core rev: ae4db0bacb9d40489499f77905f26502f3bcaa19)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1381]
This patch came from from GCC Bugzilla via Khem
Cc: Khem Raj <raj.khem@gmail.com>
(From OE-Core rev: 61dac2f6f68bc46d8f3f6f7a8757924f103c7c54)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1374] - Fixes underlying issue
[YOCTO #1331] - Detects bad GNU_HASH tables
Update to the latest upstream version. This includes a number of
generic fixes, as well as a complete refresh of the prelink-rtld.
(Prelink-rtld is similar to the ld.so/ldd functionality on a normal
system.)
The new prelink-rtld update syncs to eglibc-2.13 and enables new
symbol resolution, include GNU_UNIQUE, that was causing problems on
x86_64 and potentially other architectures with C++.
An assert has been added to also detect a bad GNU_HASH situation
which was detected on some PPC64 systems. The underlying problem is
within the toolchain, however prelink was making it worse leaving the
problem undetected.
(From OE-Core rev: 4f401134694bbc1de532aaaab6c9a761649725a1)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mtd-utils 1.4.6 is the lastest release of mtd-utils
at this time.
(From OE-Core rev: e43bec6c7dce3c6f9af5a0c5b7e5c6f740f89996)
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a wrapper for git to set GIT_EXEC_PATH and GIT_TEMPLATE_DIR so
that git-native is relocatable.
Fixes specific example given in [YOCTO #1137]
(From OE-Core rev: 9a3e25b5a3aa5e3b6ba543c4f789f66b240b38a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1440]
This fixes a problem where the native nsgmls has a path hard coded into
it, therefor add a wrapper to set the environment with the correct
paths for catalog files.
(From OE-Core rev: ce236234831ebc05ffdf1e0a368692ac2818a388)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 35fa8dc5f7 changed the gcc recipes to use
baselib for the compiler location. This is fine as long as baselib happens to
match the platform multilib definition which is enabled at the time.
This patch fixes things so that gcc will honour whatever ${base_libdir} is
set to re-allowing suitable customisation of the system layout.
[YOCTO #1362]
(From OE-Core rev: bc5f293b151b9ba0d6660814d88ee5041efce318)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently in the native case we have a path that can easily exceed the
interpretor limit so use "env nativeperl" in that case.
This patch also fixes up the target version's interpretor path but
to do this we need to bypass the configure checks.
(From OE-Core rev: b9fa8fd4f09b68cbcc12b557451a58a1f218d7f3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* because 7.3 archive is not fetchable anymore
(From OE-Core rev: c27690a04acf3870f6e0133cd05ba93d6c66126e)
Signed-off-by: Sebastian Krzyszkowiak <dos@dosowisko.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2.21.1 has disappeared upstream. There is no ChangeLog information for
2.21.1a, however diff reports only the addition of some cpu/opc files in
cgen/ subdirectory; the source code is otherwise identical.
(From OE-Core rev: 4ecf379aba11983b66be4fbe26e65aa28740ddfd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package files disappearing during index generation don't cause a fatal
error. Make package file disappearing during filelist generation also
a non-fatal error.
(From OE-Core rev: f55c96b6d53ecff865145fa22f286c89c7336515)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because of the gcc-crosssdk bug, cmake-nativesdk needs to search gcc
standard paths itself. Right now it was fixed, so remove the additional
CXXFLAG for cmake-nativesdk.
(From OE-Core rev: bac15cc98e136892d4c09f2470622965bd9dbbeb)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gcc-poison-parameters was added specifically to deal with an issue
on ppc targets and a bug when we build with -Os -frename-registers.
This bug below reports the issue and is fixed in gcc-4.6.x/mainline:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44618
Backport patch to gcc 4.5.1.
(From OE-Core rev: fef385e37e82a0eec743fbd1da11021b9e7158b5)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gcc-poison-parameters was added specifically to deal with an issue
on ppc targets and a bug when we build with -Os -frename-registers.
This bug below reports the issue and is fixed in gcc-4.6.x:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44618
(From OE-Core rev: 0fabe078a31591f41c3fdabe5aa9de1111ef82c7)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug [YOCTO #1386]
1) Add the following lines to conf/local.conf:
SDKGCCVERSION="4.5.1"
GCCVERSION="4.5.1"
2) bitbake meta-toolchain
The we will notice the error that sed can't find the directory:
${TMPDIR}/work-shared/gcc-${PV}/gcc-${PV}-${PR}
we had changed the name of S from gcc-${PV} to gcc-${PV}-${PR}, but didn't
update meta/recipes-devtools/gcc/gcc-common.inc, so fix S in gcc-common.inc
would make it work.
(From OE-Core rev: 282773ff3e0f365c08ae7e8fe759029f33e575b1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1380] Removed the hard coded repo url in opkg configuration
files.
(From OE-Core rev: 125eae393a3448e1ff5f3c2cf782ed7b3aa23920)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In certain combinations of build/host/target, they can end up
inadvertently prefixed, breaking the assumptions in the recipe.
(From OE-Core rev: a00600b853570b6090e68d20f22bb5ef5435e0ea)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some place pnum=1 is used which is removed as well since
striplevel=1 is default
(From OE-Core rev: 4e108857e0d40105f7ecbc55e99bd6c367bb7386)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libgcc now uses shared work directories so we cannot mark
these tasks as noexec. If we do, the tasks may not run
and hence gcc may not get patched for example which
results in failures.
This patch simple removes the flags since they're unneeded.
(From OE-Core rev: e2c03b2a80efeeea2298bdba385671d0ae208e95)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On e.g. Debian libql is found under /usr/lib/x86_64-linux-gnu/libGL.so.
Use a wildcard to match different locations, as uname -i only return unknown on Debian.
(From OE-Core rev: 32f74152dfe583f005c8654910b15cd7d0e3d421)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1157] [YOCTO #829]
This is a common issue to the packages which using 'MakeMaker.pm' to
generate their Makefiles. The function 'find_perl()' in 'MM_Unix.pm'
will be used to figure out the path/link of 'PERL/FULLPERL', but it
always find the 'perl.real' instead of perl wrapper.
Just update it to find the perl wrapper correctly.
(From OE-Core rev: f1d4fb02d9952138acab6d647ce8975363dfdbab)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1330]
If tcf-agent's do_compile happens before openssl does populate_root, we'll
get such a compilation failure:
framework/channel_tcp.c:34:27: fatal error: openssl/ssl.h: No such file or directory
Thanks Kumar Gala for reporting this!
(From OE-Core rev: 9314d5844a16812bb66e8c9c471ee9fd70a574c2)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It requires libx11 and libGL(if enabled GL) for building, which introduce extra
dependence in qemuppc target. Futhermore, qemu's GL code is x86-oriented, thus
some hacks needed for building in qemupcc. For simplicity, just make qemu GL's
code for native only, so that qemu building is okay in world build.
[YOCTO #1011] got fixed.
(From OE-Core rev: e744d4e2d33d914b2ca31be2d4eadab9fbcc3251)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License is GPLv2 change it.
Defining PERL for native intltool is not needed anymore
(From OE-Core rev: d4b4ecb33c727ed54ab52de79e69cd3f0d14fb35)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old valgrind package do not support for Linux kernel 3.x, only for
kernel 2.4 and 2.6. Now adding the configuration to the configure.in
file to support Linux kernel 3.0.
This commit fixes the problem in valgrind [YOCTO #1129]
(From OE-Core rev: 5fc1e6d27f52e2032aa7a8ca20bb90d939d03c77)
Signed-off-by: Lin Tong <tong.lin@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As we tweak libdir we need python libs that utilize configure to respect
it setting. By updating the python.m4 template, when we regen automake
files they will than respect the setting of libdir which is standard for
any autotools based recipe.
(From OE-Core rev: d300cfe603b00fc963f7ed874563016fcbcc47a8)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1352]
Fix the canonical arch --target processor to work with the way OE
handles the GNU canonical arch.
Also cleanup a number of files that are no longer used, and refactor
the no-loop patch into the "no-loopmsg" patch.
(From OE-Core rev: 25904ad2bdeadda9189805bb7a210eafe5795024)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We ensure that:
* the shared work directory contains PR and ensure PR values are consistent across gcc builds
* the regexp to handle library directories is in a specific task and run once
This avoids breakage that was seen in incremental builds after commit
be1f70d68b where the interpretor could
become corrupted. This was due to the sed expression corrupting
the source directory.
(From OE-Core rev: 970af6b09e1d69041b0d82fa56ace19543405eb1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On ubuntu 11.10 libGL is not in
/usr/lib/`uname -i`-linux-gnu/ directory
so we search this dir too.
(From OE-Core rev: ced947e989dfbca8055fe57e14207cb6f1357430)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has one upstream patch removed and a couple rebased
(From OE-Core rev: e1e9ee24e82e0ad45cf18387e131d2365c8e77b4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The CC variable sometimes add option information after compiler name, but python can't get the real compiler name if those information added.
Fix this issue by dropping the option information when finding compiler name.
(From OE-Core rev: 461df79fbb655e4c6894d9a9e9ce52656b96303d)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than tweaking MULTILIB_DIRNAMES & MULTILIB_OSDIRNAMES like is
done for x86-64 via 64bithack.patch. We can just go with gcc defaults
and utilize ${base_lib} for where to find gcc libs.
(From OE-Core rev: cfcc282efef30ea1988ccbe14835254a999584ea)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1336] Corrected the wrong dependency on non-native for -native
packages for the following recipes:
- util-macros
- intltool
(From OE-Core rev: e33bd6024c5f4cdd5c16d51e9b5c75ec4e1f1fb8)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implements basic e5500 enablement in gcc, with a scheduler, -mcpu
flag, etc...
(From OE-Core rev: b4f6fb7033d3798cae32d42bce5a0f8402ad57c1)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle multlib or cases that baselib is lib64.
(From OE-Core rev: 82db6bda2b60f0a4756f1d604a5dd1369fcc8a19)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code is only relevant for AIX and causes
problems with OE QA sniffer which detects -L/usr/local/lib
on linker commandline during cross compile and rightly barfs
This only happens when getloadavg() is not found in libc
so we do not reach that code with eglibc but only with uclibc
(From OE-Core rev: f235366c8a39679aa5beadf54a5e0ab7ece90d16)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edit summary field s/produced/produce/
Fix the license related warning
WARNING: autoconf-native: No generic license file exists for:
GPLv2|GPLv3 at /b/openembedded-core/meta/files/common-licenses
WARNING: autoconf-native: There is also no SPDXLICENSEMAP for this
license type: GPLv2|GPLv3 at
/b/openembedded-core/meta/files/common-licenses
(From OE-Core rev: b4cc493d5666ea82312b03e7ae7efb2d7099974b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add powerpc e5500 core support to binutils so its recognized by
assember, etc. The e5500 is a 64-bit core from Freescale utilized in
the P5020 SoC.
(From OE-Core rev: 3952db3f254e5c57a13e3a8244c76405aa3db00d)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* This is 0479b70418ef553859029911c57c63a7aaebe299 from OE. flex-native is needed to build bison. The dependency was being satisfied indirectly but we need to add it explicitly.
(From OE-Core rev: 344d5789e688bcbc566ae336f1f821110a2e4feb)
Signed-off-by: Noor, Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in multilibcase, PN has multilib prefix, so it is not
correct to use PN in SRC_URI and S. instead, we've
dedicately pruned multilib prefix in BPN, so BPN is
the right alternative for PN.
(From OE-Core rev: d6dca85028640034b1a5356920aad3268bd4f1c2)
Signed-off-by: Yu Ke <ke.y@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When supporting multilib, ${PN} will be extended with MLPREFIX. However
if a package name contains ${PN} with styles like lib${PN}, such
extension will cause error. Use BPN in this case.
(From OE-Core rev: fbb734e5753655de30c82c0a036c9043820e02cb)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
openjade-native should RDEPENDS on sgml-common-native but not
sgml-common
(From OE-Core rev: 3f7809ba54bc4941c42071728cee1b286c1e87f6)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not appropriate to require xxx.bb in xxx-native.bb, causing that
xxx-native depends on target recipe.
Use BBCLASSEXTEND to solve this issue.
(From OE-Core rev: aa8f6b64055c6576bcdb63d3bbf9ab47b87c0d59)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tcl's doesn't utilize ${baselib} for platform independent files but
defines it as follows:
TCL_LIBRARY = $(prefix)/lib/tcl$(VERSION)
Match that so if ${baselib} is not just /lib things work properly.
(From OE-Core rev: df4ed0bfc6396a0d6df0b5bfd1b3114edab90dc0)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sed regex in do_configure_prepend was producing the following result:
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR "/lib64/ld-linux-x86-64.so.2"
instead of removing the leading "/lib" or "/lib64".
Now we have it do:
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR "ld-linux-x86-64.so.2"
Additionally, with the regex fixed the manipulation of SYSTEMLIBS_DIR
needs to be removed.
(From OE-Core rev: b343436d03fa5690b16ee8ef5d4a738c5194b301)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a fixup for trying to create ustar archives when the users
UID or GID is larger than the format allows.
(From OE-Core rev: 7a092818f901c5c860e82f573534cd505d9fb959)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reads the sgml-docbook.bak and adds the entries into sgml-docbook.cat since
this occurs out of order during shared state sysroot populate.
(From OE-Core rev: 87d68520c190007869ed1877fbb40eef23763524)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch writes a sgml-docbook.bak that is read by the sgml-common during a shared
state sysroot populate, because it comes out of order.
(From OE-Core rev: b372198fe3c9d8be18bd15545fb0bc4dd9d5aa68)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch writes a sgml-docbook.bak that is read by the sgml-common during a shared
state sysroot populate, because it comes out of order.
(From OE-Core rev: 4d4047c7b997a9cee96f170c203315cbd82ff084)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch writes a sgml-docbook.bak that is read by the sgml-common during a shared
state sysroot populate, because it comes out of order.
(From OE-Core rev: 457f30a389031947f037bd7ea1217c190c2089c1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we now handle GLIBC_DYNAMIC_LINKER in gcc-configure-common.inc:
's#\(GLIBC_DYNAMIC_LINKER[^ ]*\)\( *"/lib.*\)#\1 SYSTEMLIBS_DIR\2#'
we can drop the patch which changes a hardcoded value for this.
No PR bump since there is no code change resulting from this, its just
a cleanup.
There is still a valid question over the remainder of this patch and its
interaction with multilib configurations.
(From OE-Core rev: 036faf66c3889cd8bf4cd3c9b97c80f008f3c6e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the core multilib class which can be used along with a
parameter specifying the mutlilib to use in BBCLASSEXTEND.
The MLPREFIX variable is added and can be used in cases where its too
difficult to dynmaically work out where a mutltilib prefix is needed
to be added to a variable.
This includes:
* SHLIBSDIR and PACKAGE_ARCH fixes from Lianhao Lu.
* PACKAGE_DYNAMIC mapping from Yu Ke
* PACKAGE_INSTALL mapping from Yu Ke
* RPROVIDES mapping from Yu Ke
* TARGET_VENDOR fix from Mark Hatle
* Ignorning *-native-runtime dependnecies as well as *-native from Yu Ke
* Map PKG and ALLOW_EMPTY from Dongxiao Xu
* Ensure RCONFLICTS and PKG field dependencies are remapped (from Dongxiao Xu)
* Ensure PN and MLPREFIX are set at the same time to ensure consistent BPN values (Yu Ke)
(From OE-Core rev: 5d9453049915db48ec4b5972e12287417ebb61a2)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Xu Dongxiao <dongxiao.xu@intel.com>
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to include file class and file color in order to do the conflict
resolution required with a multilib design. This is normally disabled when
we don't use the internal dependency generator, patch enables it in
all cases.
(From OE-Core rev: 4c43ea3440ecca02d2945b02017f56a8de9ff808)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When linking with gcc, the parameter is read from left to write, if *.o
calls a function contained in libxxx, the parameter order should be
"gcc ... *.o -lxxx".
This commit fixes the problem in distcc.
(From OE-Core rev: 782499eaa817f1beecc0aea5bfa075196f8e2a53)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bfd.h conflicts between 32-bit and 64-bit versions.
(From OE-Core rev: cd2975f7ad380aaac8c88bc151a2c34a42d4c540)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is this discrepency in spelling. Lets fix it in
core. There are lot of layers using SITEINFO_ENDIANNESS
This was shielded since meta-oe had its own copy of
siteinfo class. But that class has now been deleted in
favor of oe-core
(From OE-Core rev: 54a54778fad39931ac7d43daaf37ce7c1946a29b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl-dynloader.patch can't support lib64 lib32, libx32, etc.
Relax the regular expression to fix this issue.
(From OE-Core rev: 7ebc7a5cb30e13217dc297994a6d9656b52bacba)
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1250]
This added function will install a private install-catalog binary so that shared state
can find the binary as there is not a guarantee.
(From OE-Core rev: b3e68f112cff5f15b5245582eee7e087acbad2fa)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1250]
This added function will install a private install-catalog binary so that shared state
can find the binary as there is not a guarantee.
(From OE-Core rev: b4eef2e1bed0536325342ca884ee0905b7e79ada)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1250]
This added function will install a private install-catalog binary so that shared state
can find the binary as there is not a guarantee.
(From OE-Core rev: 188ac8c8fe7a004c576190c42d0f33d00ea88c60)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base gcc package is missing liblto_plugin.so. If we try a simple
hello world compile we get something like:
root@p5020-ds:~# gcc hello.c
gcc: fatal error: -fuse-linker-plugin, but liblto_plugin.so not found
compilation terminated.
We need to include liblto_plugin.so in the base gcc package and not
gcc-dev.
(From OE-Core rev: 282326a188467edf6caef21b07a7e51288674245)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This Fixes bug: [Yocto #1254]
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2011-1015
Issue #2254: Fix CGIHTTPServer information disclosure. Relative paths are
now collapsed within the url properly before looking in cgi_directories.
(From OE-Core rev: 43e7ec07065e58128819b0bb359358ce42628672)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required especially on uclibc systems where BSD compatible
obsolete functions are disabled by kconfig. Therefore we check
if the macro is undefined then we define it. Therefore eglibc/glibc
builds should work as they use to.
(From OE-Core rev: 60d91ffc6367fe11ced5890240c6b65ada66621e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
intltool recipe was using perl from the host instead of perl from
poky. This forces the recipe to use poky's perl (along with perl
modules it pulls in)
(From OE-Core rev: fd39130db3f3e66cd6be25dfbbe9cd1e7a21ff26)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is 5396e0868cf89787746fa6341ddb1f271a770595 in oe.dev but here we
instead use the nativeperl wrapper.
(From OE-Core rev: a788f8262481706d5311eb9b2573f2d69ab2a5d6)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On hosts where we may already be past the #! limit this is required
and this is safe on the target as well. This is be7fe31 in oe.dev.
Related to this we now bump all PRs for recipes that inherit cpan.
Note that in oe.dev we mangle for perl but here we use the new
nativeperl script.
(From OE-Core rev: 682a213dc732074985bf86f508305fc6eafe18d9)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need this to allow for scripts to do #!/usr/bin/env perl-native
and not require an 'inherit perlnative' per user of a package.
(From OE-Core rev: 48c1e10f53894e666283aac086e61444d2c1ed69)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is dd33ced4b8123600efa1f67f704aec13b0842ad1 in oe.dev and needed
for building in deep paths.
(From OE-Core rev: 339d039a9b2f0e97f25781ccf6937f1050d83989)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the library is installed without execute permission then package.bbclass
will not consider it for stripping. This is particularly unfortunate because
there seems to be a bug somewhere else which is causing all DSOs to end up with
a NEEDED dependency on libgcc_s, even if they don't actually require it, and
hence it is getting installed in all images (for uclibc on i586 at least).
(From OE-Core rev: b3724a67ad70f509181555e6be98e1eb3b184bb7)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several users reported issues with pseudo on CentOS 5.x hosts, Matthew
McClintock tracked the issue to the realpath_fix.patch and Mark Hatle
supplied the included fix.
CC: Matthew McClintock <msm@freescale.com>
CC: Mark Hatle <mark.hatle@windriver.com>
(From OE-Core rev: 46b2bc1d4694f927bc3d6c108309615a4903cede)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a 'side port' of current oe.dev versions. PR is kept in sync
but we drop out the target recipes in order to punt on potential perl
problems. Here we do re-configure as we don't have a dance with
perl-native to deal with. Now that we can build it, don't require it.
(From OE-Core rev: 9673d7aa1f9e1c88ba69047b2e22636c755edaaa)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add fix for PR45886 as proposed in
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=45886
(From OE-Core rev: d639fad9ce510e0a1c64c66bbda48b4a2436327b)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add fix for PR45052 as proposed in
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=45052
(From OE-Core rev: 296b2e7d90f11dc50d8c2e90bd2062733fd3d47c)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add fix for PR45094 as proposed in
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=45094
(From OE-Core rev: 2f1f920415dcf7f899d173352bf8924714352158)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add fix for PR44606 as proposed in
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44606
(From OE-Core rev: 5ec03dc1f80e437d5660aa3e0c7db9b561603d49)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add fix for PR44290 as proposed in
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44290
(From OE-Core rev: 94311ba57cd95b6b163d162587c6318da8c3b16a)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add fix for PR43810 as proposed in
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43810
Building on powerpc-eabi* with --enable-target-optspace
still fails for me though.
(From OE-Core rev: 7dc3865dd88cec50e4fb0660ea678736ec0eb46c)
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The e500v2 core utilizes a unique floating point programming model / ABI.
We utilize TARGET_FPU = "ppc-efd" to distinguish this choice (Embedded
scalar single-precision floating-point). When building the toolchain for
this ABI we need configure gcc with --enable-e500_double.
(From OE-Core rev: 5136c4ad6279c1593301f6dde9b959ad26a2fd0f)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This needs libuuid bits in order to build.
(From OE-Core rev: 24ecee09541a3f620497bc77f142493ef28e1a50)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
current RRECOMMENDS_perl-modules replace the hardcode "perl-dbg",
"perl-misc" etc. which does not work in multilib case. Instead, it
should replace the "lib64-perl-dbg", "lib-64-perl-misc". without
doing this, current code will produce RRECOMMENDS=lib64-lib64-xxx etc
This patch revise the code to fix this issue
(From OE-Core rev: d76ede1e696d52c08ede8b6e539cb0895ee73b2f)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Xu Dongxiao <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes:
| rm: cannot remove `/OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-4.5-r39.1+svnr175127/image/usr/libexec/gcc/arm-angstrom-linux-gnueabi/4.5.4/*.la': No such file or directory
| ERROR: Function 'do_install' failed (see /OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/gcc-4.5-r39.1+svnr175127/temp/log.do_install.19514 for further information)
NOTE: package gcc-4.5-r39.1+svnr175127: task do_install: Failed
(From OE-Core rev: 4db073061bdd1d3361ff90d309049a1621f06704)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set SRCREV to match the point at which 4.6.1 was released, update PV appropriately.
(From OE-Core rev: d575031f3bcd7acbc7dae25f17a60f0d493643fb)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch from SITEINFO_BITS / SITEINFO_ENDIANESS rather than
siteinfo_get...
(From OE-Core rev: 615f05dc46afa14ea4fca49a551278b92d2c99d3)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To fix these package qa warnings
WARNING: For recipe binutils, the following files were installed but not shipped in any package:
WARNING: /usr/bin/ld.bfd
WARNING: /usr/bin/elfedit
(From OE-Core rev: 2365c6830119f9242aae3450488183ec11fe9c1d)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm default will use /usr/lib if the --with-path-lib is not specified.
this will not work in non /usr/lib libdir case.
so this patch add the --with-path-lib to fix this issue.
(From OE-Core rev: f707953372dd0962efb5cb8daeb422743376bc29)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the config.sh is hardcoded to be /usr/lib, which does not work in non
/usr/lib libdir case.
This patch replace the hard code /usr/lib with ${libdir} to fix this issue
(From OE-Core rev: 603c5a241f0549da00334ac62dcbd1b0a72b6c82)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the get_python_lib() use hard code "lib". when other recipe
building use python-native, the STAGING_LIBDIR is non /usr/lib,
so the hard code "lib" will break the build
This patch replace the hardcoded "lib" with value from libdir
to fix this issue.
(From OE-Core rev: ab4ae436126f20b404375c9ae77cf66cfe31ea34)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python has several place hard code "lib" which breaks build
when libdir=/usr/lib64. SUSE has a patch to fix this issue.
So this patch add the SUSE patch to address this issue
(From OE-Core rev: c97ab268d6a7092a89c8b0051924a2acc2d86d9c)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1233]
This fix directly packages the contents in and adds the lib*.so
correctly to the -dev package.
(From OE-Core rev: d3c5f93714165e5c089ce80194f2be07e31d920c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a recipe that provides the nativesdk and target versions of
CMake.
This recipe is based on code from OpenEmbeeded (rev
b1f2e1501c19540617a829b37415c0616101c7ad).
(From OE-Core rev: ea25292bbf53c7542578e5d9f4ae0531f9d78374)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc recipes has changed, currently ${PV} is 4.6 and ${BINV} is 4.6.1 version.
Fix these QA warnings.
WARNING: For recipe gcc-runtime, the following files were installed but not shipped in any package:
WARNING: /usr/share/gcc-4.6.1/python/libstdcxx/__init__.py
WARNING: /usr/share/gcc-4.6.1/python/libstdcxx/v6/__init__.py
WARNING: /usr/share/gcc-4.6.1/python/libstdcxx/v6/printers.py
(From OE-Core rev: e29a8601c7b028696527c70aa0d4862157ce2d81)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* use INC_PR;
* show configure's failure on error;
* gather major version from PV;
(From OE-Core rev: c9d1e68a137960b6cdc81b875c087a8c1031dcbc)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This resolves unpackaged file QA warnings and an empty -doc package.
(From OE-Core rev: 1b44053f6c4ac33d5058183e6634b1ba831ae601)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, we stash libgcc if PN is gcc-cross or gcc-crosssdk. This patch
changes it to work for *gcc-cross and *-gcc-crosssdk which means it
will patch for multilib extended toolchains.
(From OE-Core rev: a39cbed2ec887fb83335ba93e92d971c84a0f4d8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a QA error.
(From OE-Core rev: 6d284d656e129be526e272f61405d1b004fe0ec9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes in commit 553a92c442bc3a35d1520a22e640a3a0e377b8f7 were not applying correctly
due to the error: "find: paths must precede expression"
This patch corrects the find syntax.
[YOCTO #1199]
(From OE-Core rev: b8d72e3af93ff9e2808fef4fe7b9d00b68bf9715)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing list, this variable isn't useful and if wanted
would be better implemented by distros using pn-X overrides.
This patch executes:
find . -regex ".*\.\(bb\|inc\)$" | xargs sed -i '/^PRIORITY = ".*"$/d'
against the tree removing the referenced. Thanks to Phil Blundell for
the command.
(From OE-Core rev: d122343362669c683acc4af295971a62cbc823fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix these kinds of Package QA warnings before they are converted into fetal errors:
WARNING: QA Issue: package perl-module-compress contains bad RPATH /build_disk/poky_build/build0/tmp/sysroots/qemux86/usr/lib in file /build_disk/poky_build/build0/tmp/work/i586-poky-linux/perl-5.12.3-r1/packages-split/perl-module-compress/usr/lib/perl/5.12.3/auto/Compress/Raw/Zlib/Zlib.so
This fixes this warning for perl recipe as well as libxml-parser-perl recipe.
It is a fix to MakeMaker within perl, so all such perl recipes will get
fixed with this perl fix.
(From OE-Core rev: a67e0c0e01a22718a617a82f54575b77928249ee)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
But ensure that gcc-cross-intermediate always uses ld.bfd since
(e)glibc won't build with gold.
(From OE-Core rev: 207a9013670560d62c793a66f01e19f4760a71a8)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ccache as a native tool and put its recipe files to:
'meta/recipes-devtools/ccache'.
(From OE-Core rev: 43416be5ccb66f93e395fdd8d0e19327f848cbe2)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake now allows the umask to be specified per task. The
following tasks will have a umask of 022 set by default:
do_configure
do_compile
do_install
do_package
do_populate_sysroot
do_rootfs
do_configure and do_compile need a umask of 022 set because -many- recipes
directly copy generated files out of recipe's build directory. Instead of
fixing each existing and future recipe, it was shown to be much easier to
just set the umask.
(From OE-Core rev: 0cfa7ebcf661aa0645c6d4d858b04946ebacb7e4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added these patches to the recipe to get it to work as desired:
Upstream patches from tmp & for-dragonn branches of repository http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
Also included the debian patches.
Nitin's patch to make the makefile cross friendly
And Xin Zhong's patch to improve mkfs.btrfs
(From OE-Core rev: 57a2140dc9673c65fea088fbd024fbd002e6937b)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix configure and Makefile to read the defaults.h and t-oe from ${B},
so that the ${S} can be shared.
* Change ${S} to the shared source directory.
(From OE-Core rev: c1ec5100da76d35afb91de7353599564e5b653dc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix configure and Makefile to read the defaults.h and t-oe from ${B},
so that the ${S} can be shared.
(From OE-Core rev: d8c6f6e01421455db30eeb4b0882720874dcb31b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patched is derived from Richard, make gcc use the shared source
directory during the different building:
1) Make gcc-cross, gcc-cross-initial, gcc-cross-intermediate and
gcc-runtime share the same source directory.
2) The source directory is ${TMPDIR}/work-shared/gcc-${PV}, for example:
tmp/work-shared/gcc-4.5.1
3) Fix do_clean to clean the shared source directory and stamps
4) gcc uses sed and creates config files against ${S} which means the
directory should not be shared. Change the way to make it work:
* The configure option --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS}
can replace the sed command, see the code in configure:
if test "x$with_headers" != x; then
glibc_header_dir=$with_headers
This has the same effect as the sed command:
sed -i 's:^\([ ]*\)glibc_header_dir=\"${with_build_sysroot}/usr/include\": ...
so add the --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS} to
gcc-configure-cross.inc( not add to gcc-configure-common.inc, since
not all the gcc building need this, the one which has its own do_configure
doesn't need it).
* Move t-oe from ${T} to ${B}/gcc, so that the patched Makefile.in
can read it easily, please see the commit for gcc-4.5.1 and
gcc-4.6.0.
* Use the defaults.h in ${B}/gcc instead of ${S}/gcc, and the patched
configure.ac(configure) can read it correctly, please see the
commit for gcc-4.5.1 and gcc-4.6.0.
* The gcc-crosssdk.inc used sed to edit ${S}/config/*/linux*.h
to change the GLIBC_DYNAMIC_LINKER, which made the source
incompatible. To make the source compatible:
- Use:
sed -i ${S}/gcc/config/*/linux*.h -e \
's#\(GLIBC_DYNAMIC_LINKER[^ ]*\)\( *"/lib.*\)#\1 SYSTEMLIBS_DIR\2#'
so entries in the files that look like:
#define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
would become
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
and we define SYSTEMLIBS_DIR in defaults.h.
NOTE:
#define GLIBC_DYNAMIC_LINKER64 (SYSTEMLIBS_DIR "/ld-linux-x86-64.so.2")
doesn't work in in the following define:
#define LINUX_DYNAMIC_LINKER \
CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
so use
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
5) Add do_configure_prepend to gcc-configure-common.inc and remove the
one in gcc-crosssdk.inc, this makes it easy to share the source,
otherwise we need do extra changes in gcc-configure-sdk.inc.
6) Use "cat > file <_EOF" to replace the "echo > file"
(From OE-Core rev: 934d38530c9a67562e53d4034aee5531f0f26750)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold
Nitin A Kamble
Matthew McClintock
Julian Pidancet
Koen Kooi
Khem Raj
Dexuan Cui
Mei Lei
Scott Garman
Richard Purdie
Michael Brown
Martin Jansa
Jan Luebbe
Mark Hatle
Tom Zanussi
Paul Eggleton
Cliff Brake
Wenzong Fan
Kang Kai
Philip Balister
Christopher Larson
Jason Wessel
Dongxiao Xu
lumag
Darren Hart
Zhai Edwin
Denis Carikli
Jessica Zhang
Sebastian Krzyszkowiak
Kumar Gala
Robert Yang
Lianhao Lu
Chris Larson
Anders Darander
Lin Tong
Noor, Ahsan
Yu Ke
Tom Rini
Phil Blundell
Joshua Lock
Ilya Yanok
Otavio Salvador
Phil Blundell