The fakeroot is already set in base.bbclass.
(From OE-Core rev: 507eaacf6f3c44038c60fd312a42123dc945ff7b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fakeroot is already set in base.bbclass.
(From OE-Core rev: 921470e9a949d296cc9b829a8002ff289f01bdb7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 7c55b6542c5ecb8258763b77e60faeb7f69cfd16)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use the official src rather than debian.
* It doesn't have a general license file, the license is embedded in the
files, which are "GPLv2+ | BSD-2-Clause".
* Supported aarch64 and arm.
* Remove parallel-make.patch that was accepted upstream. (From Saul)
(From OE-Core rev: e55b76cf3313c4ef9073f5fad06246c27282e7f3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Bug fixes in A2DP, OBEX, GATT, and mgmt
- Low Energy Secure Connections with 3.19+ kernels
See: http://www.bluez.org/release-of-bluez-5-27/
See: http://www.bluez.org/release-of-bluez-5-26/
(From OE-Core rev: beb79d7b8fa59947e1e3e979c2b0d6d637a2447f)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove old patches and rebase existing ones
Add libc for x86 for stack-protector bounce function (__stack_chk_fail_local)
(From OE-Core rev: 8017bfdaca1cdaa8bfd9178063967ec89a58be06)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libaio when built with pie and fpie does not link correctly with blktrace or ltp
so we need to disable those flags until a better solution comes along.
(From OE-Core rev: 4fbf13a6c28fc1170a4defbf50032546a14eaa59)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest version of usbutil (v008) uses the latest version of udev (v196 or greater)
which is only available as part of the systemd package. So add systemd as a DEPENDS and
REQUIRED_DISTRO_FEATURE.
Add v008 version of iconv.patch
COPYING file is GPLv2, but has newer formatting and address change.
(From OE-Core rev: 3d88f74833fafd5c928c64d9ecc0aa257b7bb0f6)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-ptest also needs a Python interpretter. Also remove the redundant
comment.
systemd-kernel-install is a bash script that can't be trivially ported to POSIX
sh.
(From OE-Core rev: 9f6b34493d332f9eff54c3eb2da9483a344e6d3c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: eb46e1d61f6658b921372354771102f91b177c66)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 70ca4ede24cd45057992580ab1a81e803a49a68b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Socat will look for openpty() in BSD headers before Linux headers, so if libbsd
is present at configure time then that will be used. We don't need to depend on
libbsd though, and leaving it floating can cause build errors, so tell configure
that the libbsd header isn't present.
(From OE-Core rev: 7defa2bb5b28ea69f749363a607a114cfa4ba4ed)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: b985f32a38b3809ea7f34b5946ac8e22a73f2741)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bump to version 7.40
(From OE-Core rev: d3704312252c1607883099063151c599cca81cbe)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* n is a tuple since this commit:
commit d3aa7668a9f001044d0a0f1ba2de425a36056102
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Mon Jul 7 18:41:23 2014 +0100
Subject package.bbclass: Improve shlibs needed data structure
since then 'n in private_libs' was always false and private libs
were always processed
* this is bad when we have libfoo in private libs, but also some package
providing libfoo, that way we ship own libfoo.so, but together with
runtime dependency on package providing libfoo
(From OE-Core rev: ec1d379683cedca4be1c252475d02c8041227142)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While directfd upgrade to 1.7.6, it always includes directfb++ utils
when C++ is used and set c++0x as c++ standard.
(In git://git.directfb.org/git/directfb/core/DirectFB.git
commit b444bcae3197be9faf883460dcc239ef757d5922, and commit
522beeb76f2a8d2dee30d928d2a5955bd06cf25c)
The directfd in qt4-embedded is c++, and there was a build failure:
...
| qdirectfbwindowsurface.cpp:336:69: error: in C++98 'rect' must be
initialized by constructor, not by '{...}'
| const DFBRectangle rect = { r.x(), r.y(), r.width(), r.height() };
...
The g++ used c++98 as default c++ standard, we should
explicitly set c++0x for directfd in qt4-embedded.
(From OE-Core rev: 833cb0e47f7542a67bdf943cede1754b7a20c1d9)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Drop fixsepbuild.patch which has been merged to 1.7.6
- Drop obsolete rename-no-instrument-function-macro.patch
(From OE-Core rev: 15c0ee00550b9e5aac04da598393a614a45bc8a9)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dropped Makefile from license check.
r127
added : lz4frame_static.h
r126
New : lz4frame API is now integrated into liblz4
Fixed : GCC 4.9 bug on highest performance settings, reported by Greg Slazinski
Fixed : bug within LZ4 HC streaming mode, reported by James Boyle
Fixed : older compiler don't like nameless unions, reported by Cheyi Lin
Changed : lz4 is C90 compatible
Changed : added -pedantic option, fixed a few minor warnings
r125
New 32/64 bits, little/big endian and strict/efficient align detection routines
(internal)
New directory structure
Small decompression speed improvement
Fixed a bug into LZ4_compress_limitedOutput(), thanks to Christopher Speller
lz4 utility uses lz4frame library (lz4io modified)
r124
New : LZ4 HC streaming mode
Fixed : LZ4F_compressBound() using null preferencesPtr
(From OE-Core rev: c40d785990ca361eb198b4a6ee92dcda5bf6d43d)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make grub, grub-efi grub_git use a grub2.inc to reduce the duplicated code.
* Make grub and grub-efi use the same patches since they use the same
source. (grub_git is different).
* grub-efi:
- Use autotools to replace autotools-brokensep
- Remove the DEPENDS of freetype, it should be a RDEPENDS.
- Remove grub-2.00-ignore-gnulib-gets-stupidity.patch since it is a
duplication of remove-gets.patch.
- Make grub-efi.rpm contain files rather than make an empty package.
* grub_git:
- Fix a SSE build failure.
[YOCTO #6310]
(From OE-Core rev: cf4aaed28a34cc652352f0817316187b72babc76)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python script:
pax-utils/usr/bin/lddtree
(From OE-Core rev: b972e7fc5774a6daf92511e897919ebad29f405b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Seed the xsltproc detection with "not found" to avoid determinism races with the
documentation which doesn't build correctly with our xsltproc.
(From OE-Core rev: 7bca8658c55223bf4b6f691e4a66a18675a1f762)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Always use use_icc to check if IceCC should be enabled. Move
ICECC_DISABLED variable checking to use_icc function. Also while we are
at it, fix condition in icc_is_allarch function.
(From OE-Core rev: 20b0168da47d6e30fcbaf6adab3bde0d398d0d00)
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some cases we want the manipulation cross-canadian performance
on TARGET_OS, there are also cases like meta-environment where we do not
want this manipulation.
We did try and use immediate expansion to avoid this problem and it
works in the non multilib case. If we have a multilib that used an
extension, like for example:
require conf/multilib.conf
MULTILIBS = "multilib:lib32 multilib:lib64"
DEFAULTTUNE = "mips32r2"
DEFAULTTUNE_virtclass-multilib-lib32 = "mips64-n32"
DEFAULTTUNE_virtclass-multilib-lib64 = "mips64"
then the n32 extension case will be misconfigured.
It turns out saving an unexpanded variable is hard. The best I could
come up with was:
SAVEDTOS := "${@d.getVar('TARGET_OS', False).replace("{", "*")}"
and then
localdata.setVar("TARGET_OS", d.getVar("SAVEDOS", False).replace('*','{'))
which is rather evil, I'd challenge someone to come up with a nicer way
of making it work though!
Rather than the above madness, we modify cross-canadian to make the
problamtic code conditional.
This fixes the original issue (where a linux-gnuspe target was seeing
'linux') of
http://cgit.openembedded.org/openembedded-core/commit/?id=0038634ee6e2b6035c023a2702547f20f67c103a
but also fixes the multilib one.
(From OE-Core rev: 85ff3d6491c54aa712ed238c561742cda4f4ba07)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deliver script ssh-copy-id from openssh which is useful to add an
authorized ssh key.
(From OE-Core rev: 16562034a2c28cbfc6c90f9324c42c08e0655b7d)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
guilt is no longer used to manage linux-yocto kernel pathes, so
we no longer need to export variables that it needed to locate
patches in the tree.
(From OE-Core rev: eb0209360d14b57fbef6fa20bdd9948e8337f24b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 6818]
Update do_unpack[cleandirs] to include the STAGING_KERNEL_BUILDDIR, and
add the same set of updated cleandirs for do_clean.
(From OE-Core rev: 0726f8099c1407eea9e53a62be94defbab32265e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since virtual/kernel do_compile modifies ${B}, we need to wait for
do_compile to copy everything across in order to ensure a deterministic
file set.
Currently, we race against the build and can see .debug directories, and
the do_compile dependency we will always see them. Add .debug to the
find path pruning.
(From OE-Core rev: 20dd877d36e85911b57bec079cf978a577fba866)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It hasn't actually been being enabled anyway: 'Disabling post unwind,
no support found.'. For now, turn it off because of [YOCTO #7129].
Fixes [YOCTO #7129].
(From OE-Core rev: d8c839afa96925b27909eb5a7b89ee83c87924bc)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perf can use either libdw or libunwind dwarf unwinders, or neither.
The perf-libunwind feature implies that if disabled, neither should be
used, so have it disable both libdw and libunwind DWARF unwinders if
disabled.
This fixes [YOCTO #7129].
(From OE-Core rev: 868dd446fa2732858813e96dd8f3f64b2a9ec339)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 3b3f7e785e279 [kernel: Rearrange for 1.8] began the process of
moving the kernel source and build artefacts out of sstate control and
into a shared location.
This changed triggered some workflow issues, as well as bugs related
to the kernel source containing build output, and hence being dirty and
breaking kernel rebuilds.
To solve these issues, and to make it clear that the kernel is not under
sstate control, we move the source and build outputs to:
work-shared/MACHINE/kernel-source
work-shared/MACHINE/kernel-build-artifacts
Where kernel-build-artifacts is the kernel build output and
kernel-source is kept "pristine". The build-artifacts contain everything
that is required to build external modules against the kernel source,
and includes the defconfig, the kernel-abiversion, System.map files and
output from "make scripts".
External module builds should either pass O= on the command line, or
set KBUILD_OUTPUT to point to the build-artifacts. module-base.bbclass
takes care of setting KBUILD_OUTPUT, so most existing external module
recipes are transparently adapted to the new source/build layout.
recipes that depend on the kernel source must have a depedency on the
do_shared_workdir task:
do_configure[depends] += "virtual/kernel:do_shared_workdir"
With this dependency added, the STAGING_KERNEL_DIR will be populated and
available to the rest of the build.
(From OE-Core rev: 6a1ff0e7eacef595738f2fed086986fd622ec32a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old Linux kernel versions rely on linux/version.h for modules; this
needs to be published for external modules to use. Copy it when
available.
(From OE-Core rev: 78226efe72c8221206594c70fa1d8742d4097af1)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the sstate hash changes for do_configure task, the do_configure
default implementation triggers the 'clean' to be run. For it to
succeed we need to have KERNEL_SRC defined in EXTRA_OEMAKE. Fixes
following error:
,----
| DEBUG: Executing shell function do_configure
| NOTE: make -e MAKEFLAGS= clean
| make -C M=.../tmp/work/... clean
| make[1]: *** M=.../tmp/work/...: No such file or directory. Stop.
| Makefile:20: recipe for target 'clean' failed
| make: *** [clean] Error 2
| ERROR: oe_runmake failed
`----
(From OE-Core rev: bc0f58f0713ea7db3c4c24a7d321435934d745d7)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
guile-2.0.11: guile: Files/directories were installed but not shipped
/usr/lib64/libguile-2.0*-gdb.scm [installed-vs-shipped]
This is because when there is no file in the directory:
for f in libguile-2.0*; do
[snip]
done
The f would be libguile-2.0* itself, make sure the libs are installed
firstly will fix the problem.
(From OE-Core rev: adf32ca3d0657cb5d363ae7a3fdb539c6627cf39)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A bug slipped in the toaster ui that prevented saving of
build configuration despite the data being retrieved
from the server. This patch fixes the shaming mistake.
[YOCTO #7117]
(Bitbake rev: 8118f465b9f87c66b2a741008f69198ac5fea901)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch modifies the all builds page by splitting the page
into two variants - the "interactive" (default) and "managed" mode
versions.
In the "managed" mode version, we display build requests instead of
builds, including the failed build requests that have no build
associated with them.
[YOCTO #6671]
(Bitbake rev: c5f5fb80308228585aa7ff9721352feb5ed9c961)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the layer compatibility configuration option from the layer
details as this is not in the design.
(Bitbake rev: c46492f5599da8af16af05ecc2d7aa7a8660416b)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds the layer details page which shows the metadata for the
layer such as layer description, machines associated with the layer as well
as the targets provided.
If the layer is an imported layer this page also allows you to update
the layer's configuration.
>From this page you can add/remove the layer from the current project
(Bitbake rev: c1442bc68ad8ba20c37b1a7cde1400297f4be811)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The import statements here are plain bizarre. Remove them, tweaking
some of the function calls to match current practices. I can't find any
reason these old imports are as they are.
(Bitbake rev: 4c2f1fe51a13ddc97e518327714292af46b9e1ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking at this function I had no idea what oldfn was, I doubt anyone
else would either without looking up what the caller does. "parentfn"
would seem a more appropriate name so rename it.
(Bitbake rev: fc70ed596703a1aa954223b169d4ad51193a6ec1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Benchmarks show that the introduction of pyinotify regressed
performance. This patch ensures we only call the add_watch() function
for new entries, not ones we've already processed which does improve
performance as measured by "time bitbake -p".
This doesn't completely remove the overhead but it does substantially
reduce it.
(Bitbake rev: 493361f35f6cc332d4ea359a2695622c2c91a9c2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The CVE fix introduced problems with entity issues, we observed this
when building the Yocto Docs in particular. Backport the fix from
upstream so we can build our docs correctly.
[YOCTO #7134]
(From OE-Core rev: af501bd51f9a86edd34e0405bc32dabe21312229)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemumips64 machine lacks a qemu system emulator,
so add it.
Fix for [YOCTO #7082].
(From meta-yocto rev: 881f334879a42934ba50281c558eefcd8a74ad9e)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We try and add watches for files that don't exist but if they did, would influence
the parser. The parent directory of these files may not exist, in which case we need
to watch any parent that does exist for changes. This change implements that fallback
handling.
(Bitbake rev: 979ddbe4b7340d7cf2f432f6b1eba1c58d55ff42)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Memory resident bitbake has one current flaw, changes in the base configuration
are not noticed by bitbake. The parsing cache is also refreshed on each invocation
of bitbake (although the mtime cache is not cleared so its pointless).
This change adds in pyinotify support and adds two different watchers, one
for the base configuration and one for the parsed recipes.
Changes in the latter will trigger a reparse (and an update of the mtime cache).
The former will trigger a complete reload of the configuration.
Note that this code will also correctly handle creation of new configuration files
since the __depends and __base_depends variables already track these for cache
correctness purposes.
We could be a little more clever about parsing cache invalidation, right now we just
invalidate the whole thing and recheck. For now, its better than what we have and doesn't
seem to perform that badly though.
For education and QA purposes I can document a workflow that illustrates this:
$ source oe-init-build-env-memres
$ time bitbake bash
[base configuration is loaded, recipes are parsed, bash builds]
$ time bitbake bash
[command returns quickly since all caches are valid]
$ touch ../meta/classes/gettext.bbclass
$ time bitbake bash
[reparse is triggered, time is longer than above]
$ echo 'FOO = "1"' >> conf/local.conf
$ time bitbake bash
[reparse is triggered, but with a base configuration reload too]
As far as changes go, I like this one a lot, it makes memory resident bitbake
truly usable and may be the tweak we need to make it the default.
The new pyinotify dependency is covered in the previous commit.
(Bitbake rev: 0557d03c170fba8d7efe82be1b9641d0eb229213)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need inotify support within bitbake and pyinotify provides the best
mechanism to add this. We have a few options:
a) Depend on pyinotify from the system
b) Add in our own copy
c) Only use pyinotify in cases like the memory resident server
For a), it would mean adding in dependencies, updating documentation and
generally creating churn for users as well as having implications for things
like the build-appliance recipe.
It turns out that glibc has the C functionality we need from version 2.4
onwards (2006) and that we just need a single python file for b), there
is no binary module needed. We therefore add in a copy of pyinotify 0.9.5
into the tree meaning we can depend on it simply and unconditionally.
c) is unattractive as we need fewer possible code paths, not more.
(Bitbake rev: d49004a4e247e3958a2f7ea9ffe5ec92794e1352)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When urls ends with trailing slash os.path.basename return "" [1]
and built urldata.localpath only with DL_DIR, it causes that
donestamp is built as DL_DIR + '.done' and seems that ssh resource
was already download.
[YOCTO #6448]
[1] https://docs.python.org/2/library/os.path.html#os.path.basename
(Bitbake rev: 47992591349bab2c12741b937096e41085399087)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>