Converted to Yocto Project from Poky.
(From yocto-docs rev: 0263e8b29efeff051184ce1700da9559ea511faf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the profiling sections to reflect Yocto Project rather than
Poky.
(From yocto-docs rev: 4f2c3bc93d97a6a8676fdd14ff9061bb92bdf5c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added emphasis to a bulleted list and I also updated a section title
to reflect Yocto Project instead of Poky.
(From yocto-docs rev: f967aff5c0a0047ef44145c6a95da84e57c255b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote and reorganzied this chapter to reflect the book as
a Yocto Project Reference Guide.
(From yocto-docs rev: ef3c3955ab0cedb57d9ae48041ed94806fe34001)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the title to refelect the Yocto Project and not Poky.
(From yocto-docs rev: 151c1925659e986b27866fed5abfcba96744b204)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each of these chapters needed the title changes to reflect Yocto
Project and not Poky.
(From yocto-docs rev: a6d8d01b20af334ca9950c4287d61a728532f652)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General re-write to make the chapter Yocto Project friendly.
Weeded out the references to "Poky."
(From yocto-docs rev: ac4fc6082f458e5ee60962693ee332bbf1e3c1a9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1001 - created a new section to address this issue. This is the
first draft. Darren to provide review comments.
(From yocto-docs rev: fc2aee572cc3e620684533a12a2d8436dc0abe32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not sure if I need to commit these again. They are showing up in the
git status command so I might have updated them and forgot to commit
them. Doing so to be sure.
(From yocto-docs rev: 75c87592c10647ec09f42a1363a8ae123cd6e33d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a comprehensive pass through this entire section that incorporates
understanding given to me by Scott Garman. I have added more detail and
text that helps the non-developer understand what is fundamentally going
on.
(From yocto-docs rev: 124c722ccf0316f6e62790ca77c88d0444559378)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a reference to the Image appendix for the description of
images. Also, added a new term "meta-toolchain."
(From yocto-docs rev: a9c1110ec7499afa669416c00bc81573fcbf920d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more general description of what this section's purpose it.
I felt it was missing some basic information and making too many
assumptions.
(From yocto-docs rev: 4a5faeecc616313147283e50fe947c68555f55a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems that this manual should be named the yocto project reference
manual as we slowly try to rid ourselves of the "Poky" term.
(From yocto-docs rev: c9d30285adf83bbcfc06233be54aec4203cbfd13)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" docbook statement
does not display correctly. I changed this to "--".
(From yocto-docs rev: b0596e0ce370d6c6e1680e89d9c5a5b9da26dd93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" statement does not
display correctly. I changed this to "--".
(From yocto-docs rev: ae3a5bc15d30668b6f9048245f70dcd82f89da32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In anticipation of 1.1 I have changes several filenames that
had "1.0" to include "1.1" instead. I am unsure if the names are
correct at this time. I will need to check them when the release is
created.
(From yocto-docs rev: ae50f920c5cf18f6c0494280a453feb41ef56d83)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" docbook statement
does not disply correctly. I changed them to "--".
(From yocto-docs rev: 8aea27a6de1ca2d5dffc84cfb7a26d29c3eb0e8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" docbook command
does not display. I changed this to "--".
(From yocto-docs rev: b5f42fad0c7447a480e0557988f868ef4833abbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are examples that use "1.0". i have changed these to "1.1"
in anticipation of the 1.1 release. At the time of the change I don't
know if the actual file names i put in are correct. I need to check them
when Beth sends me the real stuff.
(From yocto-docs rev: 3d5bd0bd38fd2d99e7d5cbb6bedf0fde0fdd5fa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Errors caught by Robert P. J. Day:
1. An extra ">" character removed.
2. Overly long commands changed to use the continuation symbol.
(From yocto-docs rev: e84b7d5a46817fdc9c0f55242840989cbe8494c7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-n is not a POSIX option and does not work on some systems (e.g. Debian
Lenny); in any case it is not strictly necessary here, so remove it.
(From OE-Core rev: 13e14763f14b5b84051ecb158404dcef937cc4e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
combo-layer's hook scripts are intended to modify patches as they pass
through; the default one adds a prefix with the component name and
a line with the component repo revision before the Signed-off-by;
however the script was also unintentionally modifying the contents of
patches *within* the patches passing through it, which resulted in
unexpected failures when the combo-layer script attempted to use
"git am" to apply them.
(From OE-Core rev: e7aae45414e4597e9244f86a81fbc940f73785c8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to a proper sentence and add a reference to the
COMMERCIAL_LICENSE variable so that the user knows where this can be
controlled.
Addresses remainder of [YOCTO #846]
(From OE-Core rev: 463d1719cc627ef22089282acfe70d7fcb835419)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* if there is multiple .bbappend files with FILESEXTRAPATHS_prepend := "/:"
then the one parsed last is causing trailing ':' and that's causing empty element in
path = extrapaths.split(:) + path
* it's hard to keep all .bbappends from foreign layers to follow this rule, so it's better
to be able to handle trailing ':'
(From OE-Core rev: 3b5591d423324da076d038ad335af47b616a7903)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add libsdl into sato image since some 3D graphics testing needs it.
(From OE-Core rev: 0934dc7c421ea6fb8f16ce535be72dda9ecb17de)
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We already enable target version for libsdl and use BBCLASSEXTEND
to enable nativesdk. No need to inherit nativesdk then.
(From OE-Core rev: f3945cf1a9d33438afbcb28ee35edc10b9d047d9)
Signed-off-by: Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Save the kernel image name into sysroot so it can be used during image
build if need. This is used by O.S. Systems products and probably
useful to others.
(From OE-Core rev: 19a587cb98a20f0e659483541fc8cec874f6afa9)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug [YOCTO #1386]
1) Add the following lines to conf/local.conf:
SDKGCCVERSION="4.5.1"
GCCVERSION="4.5.1"
2) bitbake meta-toolchain
The we will notice the error that sed can't find the directory:
${TMPDIR}/work-shared/gcc-${PV}/gcc-${PV}-${PR}
we had changed the name of S from gcc-${PV} to gcc-${PV}-${PR}, but didn't
update meta/recipes-devtools/gcc/gcc-common.inc, so fix S in gcc-common.inc
would make it work.
(From OE-Core rev: 282773ff3e0f365c08ae7e8fe759029f33e575b1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to pickup the kernel.org -stable update for
3.0.3
(From OE-Core rev: 450b6eded024c365d0ad4808b492d73c4cd02f6d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the preparation of some linux-yocto extension documentation it
was clear that some variables are being defined in each recipe, when
they don't have to be. Moving the defaults into linux-yocto.in and
allowing them to be overidden in recipes simpifies the reuse of the
base infrastructure.
(From OE-Core rev: 0ca26544efe8d650f36db9dc1c3b3a15110d7e31)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1380] Removed the hard coded repo url in opkg configuration
files.
(From OE-Core rev: 125eae393a3448e1ff5f3c2cf782ed7b3aa23920)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In certain combinations of build/host/target, they can end up
inadvertently prefixed, breaking the assumptions in the recipe.
(From OE-Core rev: a00600b853570b6090e68d20f22bb5ef5435e0ea)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some place pnum=1 is used which is removed as well since
striplevel=1 is default
(From OE-Core rev: 4e108857e0d40105f7ecbc55e99bd6c367bb7386)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable machines or distros to select the hard floating point abi for cortexa8
machines. I left out the arm7a thumb+neon combinations as they were not
present in the original non-hf set.
(From OE-Core rev: c70ebd6f8ff34071febeb132c8bc4df220e328da)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A closing quote was missing for an AVAILTUNES append operation, add it.
(From OE-Core rev: 7d46901840795638ff184a43e65299446fbd0b4e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If IMAGE_FSTYPE is empty and the user has opted to build an image warn
them and prevent the build.
Fixes [YOCTO #1267]
(Bitbake rev: 023edbe6d04f25c7e0e7b615eb06cd3727c665cb)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were setting the value as a list when a string is expected
(Bitbake rev: fc3bb3a4f04f64c6d47c7bf040b7522e9204a458)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Paul Eggleton
Martin Jansa
Jiajun Xu
Otavio Salvador
Robert Yang
Bruce Ashfield
Saul Wold
Lianhao Lu
Chris Larson
Khem Raj
Darren Hart
Richard Purdie
Joshua Lock