Found a couple more occurrences of old links to the machines
area of the downloads. Fixed them.
(From yocto-docs rev: 276352d49612bf77ed9e828c54bc1bc008345839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a couple of links for the yocto-1.1.1/machines area. These
links were old and pointing to yoctoproject.org/downloads. They
are now changed to http://downloads.yoctoproject.org/releases..
(From yocto-docs rev: cee9d5eb0b095ba647411abaf12f591e216e461f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that had a spacing problem and should not have
been linking to the manual in general. Fixed the spacing problem
and removed the links to the book in general.
(From yocto-docs rev: 0894e05dfa59b08f5c4e29a5aafbc2e5487f442c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another broken link to the Git documentation. They must have changed
this stuff up. So I set the link to point to the appropriate area in
the Git Community Book. Talks about distributed workflows.
(From yocto-docs rev: b668c8c65fdc51e0100e9ddd1c54e4926579bbe2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
there was a link to some Git documentation referencing workflows that
apparently had gone stale. I replaced the reference with a link to
the Git Community Book.
(From yocto-docs rev: 3a21f7454ec04e082d58646eecc1cffe3caa046c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Git Workflow was missing a pull line from the second (bottom) contrib
box into the project's master Git repository. I added the line.
(From yocto-docs rev: 3988e0197a7e3a6cde647f01da9ae41fd9465c75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the top-level directory created from unpacking the
edison-6.0.1 tarball from 'poky-1.1.1' to
'poky-edison-6.0.1'.
(From yocto-docs rev: 7af332806f1f4952f8e7672243d077e4ecde7fc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to change the "6.0" occurences to "6.0.1" in the examples.
(From yocto-docs rev: d6b40b3b0e98eba7f3221e79cb9612f8f10bffaf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pre-built section had a couple errors I discovered while trying
to verify the 1.1.1 release. One is a wording problem putting the
last set of commands into context. the other is that i needed
i586 as the expanded environment file in /opt/poky.
(From yocto-docs rev: d173f82e3e368b54889d6c1aa9bd51340e7e42be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates to 6.0 to make them 6.0.1 for the 1.1.1 release.
(From yocto-docs rev: 19c8fb554c620d78edc7a0330e76e31a2a374ad2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1".
(From yocto-docs rev: 3bd37946985b5a38860a61887d0bac4930c7cde1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1". Also the
release date changed to 17 February.
(From yocto-docs rev: 893d347409543cc690ab40b06384d4a0b1519ac0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1". Also the
release date changed to 17 February.
(From yocto-docs rev: 23938e6066b214aaba2e84fe4521504ad7f89b58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1". Also the
release date changed to 17 February.
(From yocto-docs rev: 8438b152ba13dab079b3918fecc418be5ddc19c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decision made to treat every release like a major release.
This caused a scrub through the manual for the string "1.1"
and "6.0" and changed to "1.1.1" and "6.0.1". Also the
release date changed to 17 February.
(From yocto-docs rev: d603f89d42442dee6287381e7a0bfb7ddcdc2353)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several changes made to turn "1.1" into "1.1.1" for the Edison
point release. There could be a couple more. I am waiting on
clarification from Beth and Jessica.
(From yocto-docs rev: 7a27eba984c4baf7dc22a61a18f9c902acc6f9d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the links to any YP manual for the 1.1.1 release now use
"http://www.yoctoproject.org/docs/1.1.1/....".
(From yocto-docs rev: 178d16e8693550341a4d307e36af934ce0bfe4c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All history table entries added for the five YP manuals.
At this commit the date was not known so a place holder date
of 12 January 2012 is in there. I needed to commit this
separately so that I could move onto other changes for the
docs.
(From yocto-docs rev: 4983a6d66d659aa7a0cc5d4953716a55f24fb03b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard reviewed the new sections and had a couple comments. There
was one technical error and he also wanted YP worked out when it was
being used in the context of the code that was doing the work here.
So I replaced with more generic terms or specifically called out
BitBake as the responsible software.
(From yocto-docs rev: 89641ffa35d7978961790d750ce84073dc8520c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more information about how BitBake actually runs a task.
The information has to do with how tightly BB controls the execution
environment of the build tasks to prevent contamination from the
build machine from leaking into the task execution environment.
This tight control actually causes some unexpected behavior during
builds. For example, when a user exports and BB_ENV_EXTRAWHITE
an environment item such as CCACHE_DIR, the effects of the environment
item never make it to the BB task execution environment. They only
make it to the data store. The user actually has to take some extra
steps to export that environment item into the task execution environment.
The added information I put into the "Running a Task" section describes
these extra steps.
Fixes [YOCTO #689]
Reported-by: Wolfgang Denk <wd@denx.de>
(From yocto-docs rev: f75a9d384c0d5ccaefe7ac2195917531b153cf5e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the tips and tricks section to include two sub-sections.
The first if the debugging stuff from Richard's email. The
second section is how to invalidate a section of the sstate
cache on a per-class basis.
Fixes [YOCTO #1500]
(From yocto-docs rev: e2cc31c112fc55c3f793f3c416311a1d317ceb37)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More work on this bug for sstate. This commit represents the third
pass through the new chapter four (Technical Details) that is
dedicated to YP components and sstate at the moment. The material
is unreviewed by Richard as of yet.
(From yocto-docs rev: ecaba811d3125e2ed1fc09df718d51e3eb30147f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed "versions" to "Versions" in the title.
(From yocto-docs rev: ce327ae04216e63315bcc735ba9b410582fe74b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Beefed up the introductory paragraph and I re-ordered the "Making and
Maintaining Changes" section towards the end of the chapter.
(From yocto-docs rev: a58c0e73d720ffb7a4931fbc196ea3831992b514)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Beefed up the introductory paragraph a bit.
(From yocto-docs rev: 99e0b95d4827dcc309ab0f212801fc86758a297d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a reference to the YP development manual in the introductory
paragraph.
(From yocto-docs rev: 977eb862e27e0f2165a2d38cdaff06271726e9fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list that describes the organization of the book needed the
"Technical Details" chapter added.
(From yocto-docs rev: bdaeb303e92f145fa6499e95ee88c629dd1c6486)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Long-term strategy for the YP Reference Manual is that it contains
reference material and not "how-to-information". A step in this
direction is to isolate any discussions on components and other
areas of YP that need talked about. So to start with, I have created
a new chapter for now named "Technical Details" that so far has
a discussion of some components and shared state. This is a
step in the direction of making this manual a reference manual and
not a "how to" manual.
Changes included removing redundant material from the 'usingpoky.xml'
chapter and also adding the new chapter 'technical-details' into the
'poky-ref-manual.xml' file used for the make.
(From yocto-docs rev: a01477f787768230bc25da2d094326922be23dd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed some comments that were buried in the file that were
notes for working on the sstate section.
(From yocto-docs rev: bd03315031bbb1b682dcd2253f85fc184822a28e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First draft of a re-write to the "Running a Build" section to try
and satisfy YOCTO #1500. I segmented the section into three areas
rather than a single area. This allowed me to create a sub-section
for the sstate stuff where it could be addressed on its own. I sent
the draft out to Richard and Mark H. and got feedback from RP that
is going to cause further changes. Thus, I am committing this partial
change.
(From yocto-docs rev: f040ed6979e988968863016103aa3ad4e7365159)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert identified this broken link to the stable Yocto Releases.
As Reported by: Robert P. J. Day
(From yocto-docs rev: acbcfe054ce345156346b3963b41e73f20b679cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split the instructions for getting the packages needed for Yocto
into sections that specifically support Ubuntu, Fedora, and openSUSE.
Also, added a couple packages to openSUSE. I did not implement a
suggested change to include a note indicating future support of
the dash shell since it probably is not good policy to document plans
as they change.
Reported-by: Darren Hart
(From yocto-docs rev: 215af24bd6f697e4a3650f4669e12c6e191e2dab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deleted the "www" from the URL to get the edison tarball. This fixed
the link.
Reported-by: William Mills
(From yocto-docs rev: aa19ff9bfb465b6a6623cda1c7a080a0c3924995)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added explanation about this class being configurable for
generating warnings or errors through use of the WARN_QA and
ERROR_QA variables. Also provided a list of tests that can
be tested for.
Fixes [YOCTO #1773]
Reported-by: Mark Hatle <mark.hatle@windriver.com>
(From yocto-docs rev: 2b15aa9076ec120d078bfcd570001a49e81df038)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL for the edision tarball was old and had been locked down in
the manual too early. It changed and now this fixes it.
(From yocto-docs rev: 8790b84e3a2d04e557f048e30085813a1e8fb003)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the Bug Tracking section to include rudimentary use of
Bugzilla for entering a new bug.
Fixes [YOCTO #237]
(From yocto-docs rev: 425965d7562f990c1f46901220caf4d79313336a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Tomer from Koko Fitclub reported that the link to the
ADT Installer tarball was broken. Fixed the link.
As Reported by: Michael Tomer <michael.tomer@kokofitclub.com>
(From yocto-docs rev: 0a78be08b9fd2223737c50f3d0d83d14f3099834)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Reported By: Robert P. J. Day.
Community member Robert P. J. Day scrubbed the Quick Start manual for Release
1.1. He found several areas that were incorrect. Many items were documented
pre-release and changed during the actual realeas. Naming conventions for
images and such had to be changed. Robert also found and suggested several
wording changes that resulted in clearer text.
I was not able to patch all the changes using the 'patch' command. I need to
work out some process issues still in order to apply patches directly to the
yocto-docs repository. Meanwhile, I hand-inserted the changes. Also, some
text changes were modified slightly by me to conform to the books style, etc.
Kudos to Robert for such a detailed look at the YP Quick Start.
(From yocto-docs rev: 50145cde42b6203412dbba227cde300d5b10111b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I somehow had that having a host with multiple cores and threads could
be used to increase the build time. It obviously should have been
"decrease". Kudos to Bill Fishburn for finding this goof.
(From yocto-docs rev: 8ca44aab26d4a48745dbd0cbaffa0fe9b28d7063)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Community member Robert P.J. Day pointed out that the URL used to
reference the Edison tarball in the manual was incorrect. It was
pointing to the old Poky area and not the Yocto-1.1 area. I have
updated the example 'wget' command with the correct URL.
(From yocto-docs rev: 402500c03a625dd7e2561775926e3a983daa0ab6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a missing section for installation of the Eclipse Yocto Plug-in.
This information is critical to the release. Jessica discovered the problem.
New section added that describes how to install the plug-in as a standard
"New Software" installation from within the Eclipse IDE.
(From yocto-docs rev: d4976ec56d39813a72519387897023f65a5884f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re-structuring of the web server that holds the documents created
some bad links. I thought I had gotten them all but apparently not.
this is a drawback of not being able to test things until after stuff
is done. In any case, I grepped through everything and this takes
care of it.
(From yocto-docs rev: cdbc3b3b7f6d6ff01024b977f966459cf414ad5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The restructuring of the web site where we store manuals broke some
links that were cut-and-pasted in from older work. These slipped by
me so not changing them would direct the user to a 1.0 version of
the externally referenced manual rather than the 1.1 version.
I also got rid of a visible "WRITER'S NOTE" in the document that
was left behind.
(From yocto-docs rev: 1508826312a2fe35e5d693821a4c7737baafcb2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to add some changes to the way we invoke qemu to show multiple
processor support. I needed the qemuparam "-smp 2". There are
other minor edits as well.
(From yocto-docs rev: 508863634ce537b0936f8e44f87b90bef678c122)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I somehow had either dreamed the word "einstein" into the release
for 1.1 and had it in there as part of the tarball name, etc.
I have replaced this obviously with "edison."
Other edits involved making the references to outside documents
more consistent.
(From yocto-docs rev: 2407b7dd89712c489d515e97d44e3c7dc0b64d20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the pathnames for kernel 3.0 from 2.37
(From yocto-docs rev: 220ce5fbb3663940b5940445190d30d98f58a438)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Richard Purdie