This is helpful when debug.
(From OE-Core rev: eef945787b5717bbb5d3bbddc446d4da86e3eb62)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The TOOLCHAINEXT_OUTPUTNAME is different from TOOLCHAIN_OUTPUTNAME, it
is used for eSDK only, so that it doesn't mix with SDK, use "?=" for it
so that other conf file can define it.
If we don't use "?=" here, then we need use forcevariable to redfine it:
TOOLCHAINEXT_OUTPUTNAME_forcevariable = "foo"
(From OE-Core rev: 933539a07af3f1cca79e49b0ea92cb7699095f96)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
(From OE-Core rev: e47d21624dfec6f71742b837e91da553f18a28c5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We strip the TOOLCHAIN_OPTIONS and HOST_CC_ARCH from CC/CXX in cmake.bbclass
whereas CFLAFS and CXXFLAGS assume that TOOLCHAIN_OPTIONS are
part of CC/CXX variables, this causes compile failures when cmake
is running compiler tests during configure on some architectures
especially armhf, because hf ABI information -mfloat-abi is part
of TOOLCHAIN_OPTIONS, so what happens is that testcase gets compiled
without hard-float, howver, during linking the float ABI option
is passed via LDFLAGS, now linker rejects this and fails like
/mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: error: cmTC_27947 uses VFP register arguments, CMakeFiles/cmTC_27947.dir/src.cxx.o does not
mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: failed to merge target specific data of file CMakeFiles/cmTC_27947.dir/src.cxx.o
collect2: error: ld returned 1 exit status
This means that CMake now fails the configure time test too
which is not right, e.g. it might disable features which actually do exist
and should be enabled e.g. in case above it is resulting as below
Performing C++ SOURCE FILE Test HAS_BUILTIN_SYNC_SUB_AND_FETCH failed with the following output:
Its actually a bug in CMake see
https://gitlab.kitware.com/cmake/cmake/issues/16421
CMake is ignoring CMAKE_CXX_FLAGS when using CHECK_CXX_SOURCE_COMPILES
function.
Until it is fixed upstream, we add HOST_CC_ARCH and TOOLCHAIN_OPTIONS
to CFLAGS and CXXFLAGS, so that we can ensure that compiler invocation
remains consistent.
(From OE-Core rev: 826f3cdb474b5728b22f08d2342fc90235ca9e7d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a systemd service file has changed it is required to reload
systemd's configuration. Otherwise changes to a service file will not be
picked up during package upgrade.
(From OE-Core rev: 94efe6d1d7893e241bcf98eff80ac8d8fbf2e885)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb.data API is deprecated, use d.getVar instead.
(From OE-Core rev: 3246319233fd111d42e0a2c2b0d6983a604d5b81)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes a crash in exception handler. All bb logging functions need an
string instances as arguments.
(From OE-Core rev: a675b2c89e477af088faee9b3be96eae19a85f0b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Contrary to the CVE report, the vulnerable trace functions
don't exist in readline v5.2 (which we keep for GPLv2+
purposes), they were added in readline v6.0 only - let's
whitelist that CVE in order to avoid false positives.
See also the discussion in
https://patchwork.openembedded.org/patch/81765/
(From OE-Core rev: b881a288eec598002685f68da80a24e0478fa496)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Reviewed-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When staging changes in a layer using git add, image-buildinfo
doesn't detect this as a modification, because of the way it
uses git diff.
Surely, merely staging, but not committing changes to git
should not result in image-buildhistory assuming that the
git repository hasn't been modified compared to the branch
HEAD, this state should be treated similarly to modifications
being unstaged.
We have to use both, git diff and git diff --cached to get the
desired result.
(From OE-Core rev: b46906889665f6ab72bccee608276646cda50140)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Reported-by: Lukasz Nowak <lnowak@tycoint.com>
Reviewed-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously do_populate_lic would bail writing the license files (such as the MIT
license text) to deploy/licenses/${PN}/ if there were no files listed in
LIC_FILES_CHKSUM. In general this isn't a problem since LIC_FILES_CHKSUM was
effectively a required field, and for packages which don't have traditional
content was generally set to a separate license such as
${COREBASE}/meta/COPYING.MIT.
However LIC_FILES_CHKSUM is now only required if there are sources in SRC_URI,
so oe-core b18fa5f removed these now redundant values. The unexpected side
effect of this is that that recipes that generate their content (such as
os-release) or are otherwise "interesting" (such as perf) don't have their
license files copied over, resulting in warnings from do_rootfs.
Resolve this by not returning early if LIC_FILES_CHKSUM is empty, and always
copy the references license files.
(From OE-Core rev: 94f5ac0651249cb98fb8d1308b7c0d10605d5a1e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems that possibly due to OE-Core commit
ac59063bee0e32d0737340974f657341717a6abe, binaries produced without
uninative aren't compatible with the uninative glibc. I did try earlier
to ensure that the eSDK could work without uninative since the default
configuration in OE-Core does not enable it, but it seems like I didn't
go far enough. Given the practical considerations, just give up and
require uninative to be enabled in order to build the eSDK. I'm not
particularly happy about this, but I don't seem much of an alternative.
Fixes [YOCTO #10566].
(From OE-Core rev: b59eee7bebd413c7abe5626f69508e1fe47dd0ac)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you are using a repository which contains a .templateconf file that
sets TEMPLATECONF to point into a layer it contains, but you aren't
using that layer in your bblayers.conf, the eSDK would produce an error
during the preparation step of the installation. An example would be
using the poky repository but setting DISTRO to your own custom distro
and removing meta-poky from your bblayers.conf. The eSDK doesn't
support creating new build directories, so we don't care about the
templates and can thus force a known good value to prevent this from
happening.
Fixes [YOCTO #10568].
(From OE-Core rev: 5ee32191a18013061dfa72e64713a94c5d321496)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class clearly intends build tools to depend upon the dummy texinfo, but it
does so using the class-cross override for cross recipes, and libtool-cross
doesn't inherit cross. Add a special case to cover this.
(From OE-Core rev: 26343dc11725c4c15b78b8d45ff7d2fb8d35ef6e)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make it clear that SDK testing can use any valid image.
(From OE-Core rev: d190c69347921a626665a53469dcf99b3c86994b)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
open() is default to 'rt' which may cause decoding errors when open
binary file:
$ bitbake xcursor-transparent-theme
[snip]
Exception: UnicodeDecodeError: 'utf-8' codec can't decode byte 0xfd in position 18: invalid start byte
[snip]
(From OE-Core rev: ddbab61f47efd9b4fde38ef8f0f3482c78abe37c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SDK_OLDEST_KERNEL currently only controls the check on SDK installation,
however as with OLDEST_KERNEL it should be controlling the OLDEST_KERNEL
value for building glibc used in the SDK. Thus, set it in
nativesdk.bbclass. This means we need to move the default to
bitbake.conf so that it can be seen in both places.
Also set a more reasonable default for SDK_OLDEST_KERNEL for x86/x86-64 as
glibc 2.24 still supports back to 2.6.32 there and there are still
people wanting to build SDKs that will install on older distros (e.g.
CentOS 6). However it's not possible to set this with overrides since
there aren't any for the SDK_ARCH, however we can instead set the variable
from conf files in conf/machine-sdk especially as there is now a soft
default for SDKMACHINE.
Fixes [YOCTO #10561].
(From OE-Core rev: 42d5781e31c5bf76b5b7e27abed4f6f3fd65bf40)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you used an & character in SDK_TITLE (possibly indirectly from
DISTRO_NAME) then sed interpreted this as a directive to paste in the
replaced string (@SDK_TITLE@ in this case). Escape any & characters in
SDK_TITLE to avoid that.
(From OE-Core rev: acb85689c13cfdac21435509001048af5c3a7e99)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that out of tree building is enabled, ${B} must be used instead of
${S} as the path for UBOOT_BINARY.
(From OE-Core rev: 1fe17c52e4d7ce1b9d69aaa2cd9d4b351a4b2603)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting up the vardeps on write_qemuboot_conf forces the updating of
variables in qemuboot.conf when machine/deploy configuration changes.
This is particularly useful when developing or setting up the qemuboot
(e.g. changing QB_* variables) for new targets or when changing
deployment variables (e.g. KERNEL_IMAGETYPE).
(From OE-Core rev: c568f6ce06512a108cada5c7100eb1f6de73f2ff)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "npm install" instead of "cp -a" is the more correct thing to be
doing here, and ensures that symlinks for executable scripts are put
into ${prefix}/bin. (I'd prefer ${bindir}, but npm does not allow
specifying paths at that level - only a prefix.)
Fixes [YOCTO #10460].
(From OE-Core rev: 90cb980a1c49de99a0aec00c0cd5fc1e165490a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you set LIC_FILES_CHKSUM to point to a relative symlink then you'll
get "Could not copy license file" warnings in copy_license_files() since
the symlink won't be valid after it's copied. If the source is a symlink
then we need to dereference it first.
I encountered this when I used recipetool on the sources for capnproto,
where the c++ directory contains a LICENSE.txt symlink to the LICENSE
file in the parent directory, and this symlink ends up being pointed to
in LIC_FILES_CHKSUM.
(From OE-Core rev: c4d3b1e9c37b920444e53d3231552da18d101882)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
(From OE-Core rev: 988349f90c8dc5498b1f08f71e99b13e928a0fd0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't remove sigdata files, we also shouldn't remove sigbasedata files
as this hinders debugging.
(From OE-Core rev: 1ebd85f8dfe45b92c0137547c05e013e340f9cec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change to get rid of FuncFailed exceptions changed the behavior
of how missing uid/gid error are be handled. Instead of catching
the exception and handling that via bb.parse.SkipPackage(), a fatal
error was called.
This won't work with recipes that are unused and therefore do not have
UID/GIDs defined. The problem triggers when parsing all recipes (e.g.,
oe-selftest runs bitbake -p).
The right way to handle this is to raise bb.parse.SkipPackage(). This
will error correctly once the recipe is needed.
(From OE-Core rev: 55384cfc743a12a78bef736ee08ed453b6a6a21e)
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class enables 'manpages' feature in packages if 'api-documentation'
is in distro features. This ensures that manpages are always built
and installed when API documentation feature is enabled.
(From OE-Core rev: 1587777f1c54137eb3dacbeb427d2f6814af1713)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed to use lz4 as lz4c seems to be deprecated.
Removed use of redirection in favor of using output file.
As Linux kernel supports only legacy format for initial ramdisk add
COMPRESS_CMD_lz4_legacy mode in case some users are using newer format.
(From OE-Core rev: 0ce5ccc7ec81a1e875c025fa0b384afdbe77fa45)
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildhistory was writing srcrevs.values() as SRCREV when only one
srcrev/branch exists. This returns a view of the dictionary values in python
3, and used to return a list in python 2, neither of which is an appropriate
value for SRCREV. It was resulting in latest_srcrev files like this:
# SRCREV = "346584bf6e38232be8773c24fd7dedcbd7b3d9ed"
SRCREV = "dict_values(['346584bf6e38232be8773c24fd7dedcbd7b3d9ed'])"
Which in turn would result in invalid output in buildhistory-collect-srcrevs.
Fix by calling `next(iter())` on the `.values()`
(From OE-Core rev: ef826a395612400924bbe49859d256b237ff59e1)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow for more flexibility and overrides in BSP
layers.
(From OE-Core rev: 1886ab2f1dc1e3b5758a85604998e8deb9198f5e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After 0d6b7276003f1afabc6de683f663540327d52bdc, the exceptions are
correctly checked if the rootfs size check fails. In case of a
failure a build error is triggered.
However, there are cases where this is known to fail (e.g.,
with meta-swupd the rootfs for swupd images is other than IMAGE_ROOTFS).
Because of that, check IMAGE_ROOTFS exists before trying to get the
size of it. Also, in case of any error catched as err, simply print
out a warning.
(From OE-Core rev: b4929542ff01a24bea5edd1c40e3174f55e213ff)
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
MACHINE = "qemumips64"
DEFAULTTUNE = "mips64-o32"
$ bitbake linux-yocto
ERROR: linux-yocto-4.8+gitAUTOINC+03bf3dd731_674818dad5-r0 do_package_qa: QA Issue: Bit size did not match (32 to 64) linux-yocto on
/work/qemumips64-poky-linux/linux-yocto/4.8+gitAUTOINC+03bf3dd731_674818dad5-r0/packages-split/kernel-module-parport/lib/modules/4.8.0-yocto-standard/kernel/drivers/parport/parport.ko [arch]
The mips64-n32 works since it would set ABIEXTENSION to "n32" so that
TARGET_OS is linux-gnun32, and it will skip the check, but "mips64-o32"
doesn't set ABIEXTENSION to "o32", "n32" or "32", so the error happend.
Skip the check if mips64.*32 matches DEFAULTTUNE can fix the problem.
Another way to fix the problem is define ABIEXTENSION to "o32" or "32"
for mips64-o32, but that may make things confused since "o32" is purely
32 bit.
[YOCTO #10305]
(From OE-Core rev: 4e61d8d6f4619dbfaeb5ca642449de7cf4b3e92d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The eSDK generation assumes that DL_DIR is downloads/ under the build directory,
and puts files such as a freshly buily uninative tarball in there expecting
bitbake will find it later.
Whilst ${TOPDIR}/downloads/ is in fact the default value for DL_DIR in
bitbake.conf, and any instances of DL_DIR are removed from the original
local.conf, there is still the possibility that other layers could contain a
site.conf that assigns DL_DIR.
If this happens the errors are quite mysterious as it fails to find the
uninative tarball and so the hashes all change, and eSDK building fails.
Ensure that this cannot happen by explicitly assigning the DL_DIR that we
require, instead of assuming that the default value will be used.
[ YOCTO #10439 ]
(From OE-Core rev: bc2e6f5eab47e869dbc4a3eacfe759b9b1cacaee)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* syslinux config hardcodes kernel image as /vmlinuz add warning message
when the selected image doesn't exist and allow to select different image
with VM_DEFAULT_KERNEL variable (qemuboot.bbclass is using QB_DEFAULT_KERNEL)
(From OE-Core rev: e6b21d1b3716ee6f4aec1674e56f06b2963a7968)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To produce certain types of images wic uses do_bootimg results
to assemble final image. For example, it copies BOOT/EFI directory
produced by do_bootimg to boot partition for every EFI image.
The tricky part of this is that do_bootimg task is not always run,
so we can't always make do_image_wic depend on do_bootimg. We only
need to do it if do_bootimg present in task graph.
Thank to Cristopher Larson for this fix.
(From OE-Core rev: 1a961b4becf677c9eb07c5b24a8ddb75044663d1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "mips" and "mipsel" to "machdata" table.
Although there is a way to add entries to the "machdata" table
from a BSP without modifying the insane.bbclass directly, MIPS is
already supported in poky and as such the relevant entries should be
present in insane.bbclass.
(From OE-Core rev: 3ba03d1affa6f647e9a03c8ba4389606a0da8e8b)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both "arc" and "xtensa" are valid Linux architectures, add
them into valid_archs table.
(From OE-Core rev: 20d511cd1b7fe4891f7842be12f13a92da433c46)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible - albeit unlikely - that gdk-pixbuf isn't present in the sysroot
when a recipe inheriting this class is and the sysroot is finalised.
One example would be if the sstate archive has librsvg but not gdk-pixbuf:
librsvg will be extracted from the sstate but gdk-pixbuf will be built to "fill
in the gap". In this situation the setscene completion hook installed by
pixbufcache.bbclass will attempt to execute gdk-pixbuf-query-loaders, but that
binary hasn't been installed by gdk-pixbuf yet.
Also add gdk-pixbuf-native to DEPENDS in native builds to ensure that the
binaries we expect will be present, as it's possible to build loaders without
linking to GdkPixbuf.
[ YOCTO #10420 ]
(From OE-Core rev: 03cdb3366ded46cd760656e4cda0be37c1f82109)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the move to put image deployment under sstate control in
d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically
removed before a new image is deployed (the default behaviour of the
sstate logic).
RM_OLD_IMAGE is therefore no longer required to provide this
behaviour, remove the variable and its users.
(From OE-Core rev: 93631befe8b962bf99524746b49f4ebca336175c)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user modifies files such as CMakeLists.txt in the case of cmake,
we want do_configure to re-run so that those changes can take effect. In
order to accomplish that, have a variable CONFIGURE_FILES which
specifies a list of files that will be put into do_configure's checksum
(either full paths, or just filenames which will be searched for in the
entire source tree). CONFIGURE_FILES then just needs to be set
appropriately depending on what do_configure is doing; for now I've set
this for autotools and cmake which are the most common cases.
Fixes [YOCTO #7617].
(From OE-Core rev: 923fc20c2862a6d75f949082c9f6532ab7e2d2cd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to ignore the return code from the init script 'stop' command in
the preinst and prerm scriptlets. Otherwise package upgrade or
deinstallation (at least when opkg is used) is likely to fail if the
daemon is not running. That is because an init script possibly returns
'1' if you try to stop a service that is not running which, in turn,
causes the scriptlet to fail which, in turn, causes the package
(de-)installation to fail.
[YOCTO #10299]
(From OE-Core rev: daa3c266a7ffa060b52381fa00df518102fceda8)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'arch' QA test currently simply outputs the ELF machine field as a number
which isn't helpful. Display this as a human-readable name to make it clearer
to the user what the problem is.
(From OE-Core rev: 607a2a1de4b77818c3e801a4de7ff0888229e036)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The source archiver was not handling the gcc-source target correctly, since it uses the
work-shared directory, we don't want to unpack and patch it twice, just as the comments
say, but the code was not there to check for the gcc-source target.
[YOCTO #10265]
(From OE-Core rev: bbac0699ceadb7a25a60643fb23dffce8b4d23d0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not uncommon for qemumips[64] builds on the Yocto Project
autobuilder to fail during Sanity Tests after a very long timeout
period. This is due to the MIPS emulation in QEMU being slow and
some of the build tests taking a very long time on MIPS machines.
This patch works around this slowness by disabling the more
complex build tests for QEMU MIPS machines.
[YOCTO #10340]
(From OE-Core rev: 4a1c04c0d509b2cda9b2ccd5a80523c05fa279c6)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check that the init script that is going to be called in the prerm()
script really exists and is executable. There might be a packaging bug
or the script might've been removed already earlier in prerm().
[YOCTO #10299]
(From OE-Core rev: aabb87c9dbd60fe9467ca0354ec05c275a3f1b1a)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Yocto Project Eclipse plugin requires that runqemu and unfsd are
accessible within the SDK, and indeed the standard SDK has these. This
turns out to be fairly easy to do - we just need to add unfsd and symlink
it, runqemu and a few other scripts into the SDK's bin directory.
Fixes [YOCTO #10214].
(From OE-Core rev: 9007e0e3fce7e09b043fead54b17f69c1661d162)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class allow the extlinux.conf generation for U-Boot use.
The U-Boot support for it is given to allow the Generic Distribution
Configuration specification use by OpenEmbedded-based products.
This class can be inherited by u-boot recipes to create extlinux.conf
and boot using menu options.
U-boot with extlinux support is machine dependent, so to use this class
you need to set UBOOT_EXTLINUX to 1 in machine configuration file and
also set root= kernel cmdline UBOOT_EXTLINUX_ROOT. This variable is used
to pass root kernel cmdline, e.g:
UBOOT_EXTLINUX_ROOT = "root=/dev/mmcblk2p2"
(From OE-Core rev: 7c18abeb2a6ef8b7bb53aa92a9ee76bd465fada2)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #10389]
Use a glob (*) to match all mips (not previously matched). This will ensure
that the linuxloader is properly returned for mips, mipsel, mips64,
mips64el and their n32 variants.
See: https://sourceware.org/glibc/wiki/ABIList#mips for the official list
of loaders.
(From OE-Core rev: b90d68fda3d14b4d19b7ffcb5b80ed28563a616d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for MIPS Release 6 ISA
(From OE-Core rev: fcb67508be00cdd22181d6c9e4c3d29dfa578b45)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for MIPS Release 6 ISA. The loader is located at a
new place for multiarch.
For more details, check https://wiki.debian.org/Multiarch
and https://sourceware.org/glibc/wiki/ABIList#mips
(From OE-Core rev: 27537d146f3f143b06819102c348c8914287ec8e)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for MIPS Release 6 ISA
(From OE-Core rev: 8e098ddb656d39c56427ad45e0fa429b8f0153f5)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for MIPS Release 6 ISA
(From OE-Core rev: aecb57f2fd65a1bfbc2e9a23fba4984d44055c4c)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for MIPS release 6 of the ISA
(From OE-Core rev: 6613ee0155de1e0afd30cd8d8290eda3f7486337)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If attempting to patch a git repo without a proper git config setup,
an error will occur saying user.name/user.email are needed by git
am/apply. After some code was removed from kernel-yocto, it was
simple enough to reproduce this error by creating a kernel patch and
using a container to build.
This patch abstracts out functionality that existed in buildhistory
for use in other classes. It also adds a call to this functionality
to the kernel-yocto class.
Fixes [YOCTO #10346]
introduced in OE-core revision
0f698dfd1c8bbc0d53ae7977e26685a7a3df52a3
(From OE-Core rev: 25b43cb05c645e43f96bc18906441b8fdc272228)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* otherwise there is a lot of warnings about missing close on file descriptor
(From OE-Core rev: 629ff6eb58ddad2d533cbcc8b1a4594d3c8fd441)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The checkstatus function fires an event to notify bitbake UI about
the progress of the task, this function is implemented using ThreadPool
and is causing event lose when multiple threads tries to fire an event
(writes over socket/fd).
[YOCTO #10330]
(From OE-Core rev: 6e0bb9d141438c0051c32b0d3a247915b71ccb82)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 5f8eb6726a492d259bfe25b0bbce2333c9505504)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: de45a7e302fe5a2a08baf26c91e2c788d7285263)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 8443b6f3f25181f5ac49bc25a1387cd05b814376)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 5369bb7fa6238cc85f0b5263519974c1a2d9eea8)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 086240468265dc15c5b4cdb2594d5aa7c3114dda)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 20e669f56489b2c8a9bc6a0e6f3eac81ef35445a)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 33611b69c221cf875eba1c7cb599c256825ae470)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 21969c3d1397e0a11a8cb9dad8ce3469ee655f57)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 11a2f932073635f9680470cd69216cecf7ed0c37)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 8e956d66087b9c41591b8e4e817ed6c9e42f5981)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 8e9255763674703ea16651da64fe794e5359f16e)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: a77b4e543407eee133fbd38ac9b69e90bea541e0)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: f7c82acbac583c7838550175796a7aa697a5c7e0)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: c61d7a01c89f0d25d069191cc47d6768bee2ce48)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: cca772ecf0adafbd767974add27ada125aae5269)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 48c4faa1d7117732974e51428f7ed2f62ad7e7bf)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: e507cb978fd52164beb28324933cb3d5e368c3ab)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: f0561ba205723fd7f05c28d501c2c517034b326c)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 5a074e8a26d27ea9c4f31e2b75b2b14f6e0641d3)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 01e3ac73860a24710852383a15bb5d01db13de57)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sets a good example and avoids unnecessarily contributing to
perceived complexity and cargo culting.
Motivating quote below:
< kergoth> the *original* intent was for the function/task to error via
whatever appropriate means, bb.fatal, whatever, and
funcfailed was what you'd catch if you were calling
exec_func/exec_task. that is, it's what those functions
raise, not what metadata functions should be raising
< kergoth> it didn't end up being used that way
< kergoth> but there's really never a reason to raise it yourself
FuncFailed.__init__ takes a 'name' argument rather than a 'msg'
argument, which also shows that the original purpose got lost.
(From OE-Core rev: 9635af9785509a39c1ac2509740d46276119a0ca)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is used by libtool to know what paths are on the default loader
search path. As we have modified loader paths, native.bbclass can tell libtool
that both the sysroot libdir and the host library paths are searched, so no
RPATHs for those will be generated.
(From OE-Core rev: 2d0a1b029447842a6f97f72ae636c9020c4206a9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is used by libtool to know what paths are on the default loader
search path. As we have modified loader paths, cross.bbclass can tell libtool
that both the sysroot libdir and the host library paths are searched, so no
RPATHs for those will be generated.
(From OE-Core rev: 5b61324fa76b27bb6ce13e78b17e767eed2f8f57)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When changing multilibs, allarch recipes should not be rebuilding. This
adds enough variable exclusions to make this work properly. Future
regressions will be prevented with new testing.
(From OE-Core rev: ce1e7fcc60276040477c1d5e3129e029bb9f204b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package_write_rpm references the MULTILIBS variable and the checksums
of nativesdk recipes were changing as a result of this.
We don't need/want MULTILIBS values for nativesdk so disable this.
(From OE-Core rev: 738ff6bc72533bbdeb58425b20b0bfbeff280a04)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This begins moving away from the deprecated subprocess calls in an
effort to eventually move to some more global abstraction using the run
convenience method provided in python 3.5.
[ YOCTO #9342 ]
(From OE-Core rev: 0d6b7276003f1afabc6de683f663540327d52bdc)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a space between the root and append parameter, similar to
syslinux.bbclass, in creating the final grub.cfg.
Without this, the final kernel boot parameters will concatenate into
strings like root=/dev/ram0console=ttyS0...
(From OE-Core rev: a3b271ec8e1b2758e1e619e76646d22fd5777ce3)
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Much as with -native recipes, as addressed in commit
b15730caf0, arch specific variables
like MIPSPKGSFX_ABI were affecting -nativesdk sstate checksums for
recipes like nativesdk-glibc-initial.
Disable multilib_header for nativesdk as we don't use multilibs in
this scenario.
[YOCTO #10320]
(From OE-Core rev: f1c7b4f16dc9a7e5155108641fed8b3d98c931f3)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The last line in the generated /etc/build doesn't end
with a newline anymore, restore it.
(From OE-Core rev: afbd3917061212558ccacda129eff516b735e5b1)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Arm is unusual in that we force it to "linux-gnueabi" and "linux" doesn't
build. This was causing problems for multilib configurations which were assuming
"linux" was the default compiler rather than linux-gnueabi.
This change does two things, ensures symlinks are generated for linux-gnueabi
and also adapts the libgcc code to account for the difference on arm.
It still needs to immediately expand/save TARGET_VENDOR but we defer
deciding what TARGET_OS should be until we know TARGET_ARCH (which the
multilib code may change).
[YOCTO #8642]
Note that sanity tests of a 32 bit arm multilib still break due to issues
with the kernel headers on a mixed bit system. This looks to be a general
headers issue for the platform though and a different type of bug.
(From OE-Core rev: bcddc3e7eff138add031bc9c9728be5a42fa62ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* in some cases we might set QB_DEFAULT_KERNEL to the real filename
instead of symlink and then this whole readlink work around actually
breaks the build, because os.readlink fails on normal files:
>>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86-master-20160927084848.bin')
'bzImage-linux-yocto-qemux86.bin'
>>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin')
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OSError: [Errno 22] Invalid argument: '/jenkins/mjansa/build-starfish-master-mcf/BUILD/deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin'
(From OE-Core rev: a11d0d8641b7dfb05c78645cf21f2c04a08c4822)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function never worked because the SDK_OUTPUT and SDKPATH vars are
written bash-style in a python function. The only reason it never failed
a build is because the function bails out the start because of the flag
CHECK_SDK_SYSROOTS.
And I guess nobody tested with CHECK_SDK_SYSROOTS enabled until now.
(From OE-Core rev: 9f60dfdaaa74b90ebcfcdd9f3817c62a56243e92)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed parted-native dependency from do_image_wic as it's
already mentioned in IMAGE_DEPENDS_wic variable.
Thanks to Christopher Larson for pointing out to this.
(From OE-Core rev: 82353471ccaae59967df7f14de0b4065cbc8169a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder.
Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS
result in conflicts. Eventually we hit the error:
ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist.
The build has stopped as continuing in this scenario WILL break things
This patchset addresses the problem by SDK_SYS as the recipe name suffix instead
of SDK_ARCH.
[YOCTO #9281]
(From OE-Core rev: d2eccccb70e809d482c493922f23aef4409cfd82)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a recipe uses more than one source which isn't a plain file (for
example, multiple git repos), then do_ar_original created the source
archives using the same filename and thus only archived one source.
The "name" parameter is used as file suffix to create unique names for
each source, leading to archives following this pattern:
deploy/${TARGET_SYS}/${PF}/${PF}[-<name>].tar.gz.
The ${PF} part is a bit redundant, which may or may not be
desirable. The patch is more localized this way (no need to modify
create_tarball()).
For example, meta-oic's iotivity_1.1.1.bb uses:
url_iotivity = "git://github.com/iotivity/iotivity.git"
branch_iotivity = "1.1-rel"
SRC_URI = "${url_iotivity};destsuffix=${S};branch=${branch_iotivity};protocol=http;"
url_tinycbor = "git://github.com/01org/tinycbor.git"
SRC_URI += "${url_tinycbor};name=tinycbor;destsuffix=${S}/extlibs/tinycbor/tinycbor;protocol=http"
url_hippomocks = "git://github.com/dascandy/hippomocks.git"
SRC_URI += "${url_hippomocks};name=hippomocks;destsuffix=${S}/extlibs/hippomocks-master;protocol=http"
SRC_URI += "file://hippomocks_mips_patch"
url_gtest = "http://pkgs.fedoraproject.org/repo/pkgs/gtest/gtest-1.7.0.zip/2d6ec8ccdf5c46b05ba54a9fd1d130d7/gtest-1.7.0.zip"
SRC_URI += "${url_gtest};name=gtest;subdir=${BP}/extlibs/gtest"
url_sqlite = "http://www.sqlite.org/2015/sqlite-amalgamation-3081101.zip"
SRC_URI += "${url_sqlite};name=sqlite3;subdir=${BP}/extlibs/sqlite3;unpack=false"
These now get archived in deploy/sources/*/iotivity-1.1.1-r2/ as:
gtest-1.7.0.zip iotivity-1.1.1-r2-recipe.tar.gz sqlite-amalgamation-3081101.zip
hippomocks_mips_patch iotivity-1.1.1-r2.tar.gz
iotivity-1.1.1-r2-hippomocks.tar.gz iotivity-1.1.1-r2-tinycbor.tar.gz
(From OE-Core rev: 5c63ffc706c0fff8cfb797a238f4f0e73ee2813d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support for absolute paths in the "subdir" parameter was recently
added (bitbake rev: c3873346c6fa). The git fetcher has supported
absolute paths in "destsuffix" already before.
When the path is absolute as in destsuffix=${S}/foobar, the tmpdir
used by do_ar_original gets ignored, which breaks:
- source code archiving (tmpdir is empty)
- compilation due to race conditions (for example, ${S} getting
modified by do_ar_original while do_compile runs)
To solve this, these parameters get removed from URLs before
instantiating the fetcher for them.
This is done unconditionally also for relative paths, because these
paths are not useful when archiving the original source (upstream
source does not have them, they only get used by the recipe during
compilation).
(From OE-Core rev: c27c464e267db3f4b08cbd966412d19b0e756d28)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to be able to query a list of variables to obtain the values
in each multilib context. This adds such a function which works even
if called in the non-default recipe context.
(From OE-Core rev: 4202a09dece07c0d3f654c2b1ae504a031b4ee90)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are architectures which support running in 32 and 64 bit
flavours however the simulation is provided in a specific QEMU
setting, requiring us to use a different binary. This patch allow this
to be done using, for example:
QEMU_TARGET_BINARY_ppce5500 = "qemu-ppc64abi32"
(From OE-Core rev: 9b6d414fd27932ed1325de54e8e867c75b340e3d)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes:
* During install all files were recompiled -> redurced build time
* For some recipes we found lot of links to build host image path
(From OE-Core rev: 3d1d287785c388bebba2ba1f2d8f843a5c6a2417)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The feature to install packages in the target requires to
build the package manager. It would fail, with very obtuse
errors, if a test requires to install something and the
package manager hasn't been build. This will add the package
manager as dependency for testimage.
[YOCTO #10260]
(From OE-Core rev: cf548fd85297585cc5688eda45ee332200bbd4b7)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We use toolchain_create_sdk_version() in buildtools-tarball but
don't want the extra classes toolchain-scripts pulls in, therefore
split out a separate base class for this function which both
toolchain-scripts and the buildtools-tarball can inherit.
(From OE-Core rev: a398dfa654dc035c404fc12279fac9edf6403e11)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${D} is listed in cleandirs so no need to list it in dirs as well.
The default directory is ${B} so this is a cleanup which should have
no changes to the execution.
[YOCTO #10017]
(From OE-Core rev: 7e0f95bf359bc3b5bb1578024a993e184de155cd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As things stand there are multiple races in the CONFIG_SITE handling
where checksums can change depending on whether site directories
exist or not when parsing happens. This is bad.
Secondly, there is a build race that occurs if you build virtuals
in parallel with the "main" recipe, since the main recipe is parsed
when the virtual is (since it sets variables like BBCLASSEXTEND)
and with the current code, it may look for files and directories
which could be created/destroyed which the loop is executing. This
is also bad.
The aclocal-copy directory should only ever be accessed by the call
from autotools.bbclass. This changes the parameter name to make it
clear and ensures all callers have the right usage, neatly avoiding
all the problems above. Also added better comments.
(From OE-Core rev: 3207244004c612c1a0e13921251003e5e635d1b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel being built should match what the recipe claims it is
building. This function ensures that happens by comparing the version
information in the kernel's Makefile to the PV the recipe is using.
v2 changes:
* Match against PV instead of LINUX_VERSION
* Match against EXTRAVERSION as well (e.g., -rc4)
* Cleaned up version string building
Fixes [YOCTO #6767].
(From OE-Core rev: ec467cfaea5c8cf22c61daa8845c2e4e96449512)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include SDKMACHINE in the tasks stamp information and the name of
the sstate-inputdirs so that changing SDKMACHINE doesn't result in
valid output of the task being deleted when SDKMACHINE is changed.
Without this patch changing SDKMACHINE and building an SDK resulted
in toolchain installers for other SDKMACHINE's being deleted from
the deploy directoy.
[YOCTO #10275]
(From OE-Core rev: d7a06b53af0066bd12f5f42e10e82b307fd069ce)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As parted is always used by wic it makes sense to make do_image_wic
dependent on parted-native:do_populate_sysroot. This should help
to avoid adding it to all wic image recipes.
(From OE-Core rev: c687c9fcc010947f52e1cd153ea74ae5f6343ca4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the very first build, the DEPLOY_DIR_IMAGE
directory might not have been created yet, causing
the creation of the qemuboot.conf config file to
fail.
This is because write_qemuboot_conf() runs at
rootfs creation time, i.e. before deploy.
So let's create the directory if necessary before
trying to write the config file.
(From OE-Core rev: ee4697350a553a36ca17b9376911e56eee43a465)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make sure changes to any source files are detected when externalsrc
is used, it sets BB_DONT_CACHE to force the recipe to be reparsed
every time. Previously, this was done conditionally based on whether
EXTERNALSRC was set. This worked fine for building the base recipe.
But if one tried to build, e.g., a native version of it (provided via
BBCLASSEXTEND), the recipe would not be reparsed as expected.
To solve the above problem, BB_DONT_CACHE is now set for the base
recipe if EXTERNALSRC is set for it or any of it derivatives.
(From OE-Core rev: 449a0b21255d895e8620383ce76a9d7ea41b5cc6)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default values for KERNEL_IMAGE_BASE_NAME and MODULE_IMAGE_BASE_NAME
are already assigned using ?= and anyone wanting to over-ride one is
likely to want to over-ride them all. Make the three consistent with
each other.
(From OE-Core rev: e30c6c93bb70d17244c90c2be12229148f8f6314)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow runqemu to fall back to trying the link name when
a file matching the full name can't be found.
(From OE-Core rev: 3ccbaaad75f0a53d8bcf6a5c748ec80c96a383bd)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KERNEL_IMAGETYPE gives the filename of a symlink to the kernel,
which may not be available i.e. if the user downloads some build
artefacts to run on a local machine. It's also possible that the
link will point to a newer kernel than was intended for use with
the rootfs in the qemuboot.conf.
It's much more reliable to read the name of the file
KERNEL_IMAGETYPE is linking to and assign the full filename to
QB_DEFAULT_KERNEL.
[YOCTO #10285]
(From OE-Core rev: d57bdacab13605ada4cd9e9159c18fdcd6eeacbc)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split out the functionality doing configuration re-parse check into a
separate event handler that is hooked into ConfigParsed event. This will
make config re-parsing actually work. Re-parsing in bitbake is triggered
by setting BB_INVALIDCONF whose value is checked after configuration has
been parsed (after ConfigParsed event). However, previously
BB_INVALIDCONF was set in SanityCheck event handler which caused
re-parsing never to happen.
[YOCTO #10188]
(From OE-Core rev: 8fda70bb74f7c63d393d5424436d034d2cc6c05e)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if the gshadow file did not exist in the sysroot when
perform_groupmems() was run, it would be temporarily created and
removed again afterwards. This was supposedly due to groupmems failing
if it does not exist.
However, based on empirical testing and examination of the source code
for groupmems, it should not fail if the gshadow file does not exist
when groupmems is started. But it WILL fail if the file is removed
sometime after its existence has been check at the beginning of the
execution, but before it needs to be modified. And this is exactly
what the previous code in perform_groupmems() could cause if multiple
tasks simultaneously modified users or groups. It could cause any of
the useradd, groupadd and groupmems commands to fail as long as at
least one other recipe invoked perform_groupmems().
(From OE-Core rev: 4fcaa484a2e8046cf3277b5d14933cdaa94a4c3f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class adds a new task for all the recipes to use
cve-check-tool in order to look for public CVEs affecting
the packages generated.
It is possible to use this class when building an image,
building a recipe, or using the "world" or "universe" cases.
In order to use this class it must be inherited and it will
add the task automatically to every recipe.
[YOCTO #7515]
Co-authored by Ross Burton & Mariano Lopez
(From OE-Core rev: d98338075ec3a66acb8828e74711550d53b4d91b)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous work to clean up the license QA code (oe-core fbdf977) had the side
effect that failing the license sanity check (bad or missing LIC_FILES_CHKSUM)
would emit an error message but wouldn't actually abort the build.
Solve this by changing populate_lic_qa_checksum() so that it tracks if the
message class was in ERROR_QA and if so, aborts the function.
[ YOCTO #10280 ]
(From OE-Core rev: 5ba1a7505b904a4aa2118fa9614d76df97597af8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some issues in sstate which can't be handled by file removal
alone. Currently there is no way to execute a command against sstate and
doing so is potentially problematic for things like dependencies. This
patch adds a mechanism where any "postrm" script is executed if its present
allowing some openjade/sgml issues to be resolved.
[YOCTO #8273]
(From OE-Core rev: 2268efd0cd3ddb40870c4c424d10444ba86d2849)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are both referenced by
_create_devfs, therefore ensure that rootfs is rebuilt if changes
are made to either variable.
(From OE-Core rev: 06092cee0dc8c7cd2408ddfa9e9dc43fd9dfea2e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After we run the build system within the eSDK internally as part of the
sstate filtering that happens during do_populate_sdk_ext, we need to
ensure that the TMPDIR created during that process gets deleted. However
we were using the TMPDIR path for the build producing the eSDK which may
not be the same (since that value would typically be filtered out) thus
if the user had set TMPDIR to something other than the default, the
temporary TMPDIR would not be deleted which not only led to extraneous
junk entering the SDK but also failures during install because the
TMPDIR path was different. In order to fix this, force TMPDIR to a known
value during the sstate filtering run so we know what to delete
afterwards.
Fixes [YOCTO #10210].
(From OE-Core rev: 038d9db66e69c9de12eb8581acb28a8facd726b6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently when you run builds from sstate, you can see warnings like:
WARNING: systemd-1_230+gitAUTOINC+3a74d4fc90-r0 do_configure: /data/poky-master/tmp-glibc/sstate-control/manifest-intel-corei7-64-glibc-initial.populate_sysroot not found
WARNING: systemd-1_230+gitAUTOINC+3a74d4fc90-r0 do_configure: /data/poky-master/tmp-glibc/sstate-control/manifest-intel-corei7-64-libgcc-initial.populate_sysroot not found
This is due to co_configure wanting to copy a limited number of m4 macros,
only listed in a recipes DEPENDS but that set is still larger than the set of
recipes which get restored from sstate.
For build determinism and to avoid these warnings, we need to make this
function match what the sstate code does. We really don't want to duplicate
the functionality since keeping things in sync would be hard so we create
a data structure which can be passed into the same underlying function,
setscene_depvalid().
[YOCTO #10030]
(From OE-Core rev: 37ffb1f7d812e40d6fa23b44782eaa8436d9ab76)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various recipes depend on the kernel's do_shared_workdir
task, a quick grep suggests all external kernel modules
(via module.bbclass), but also perf, and potentially any
additional headers as outlined in linux-libc-headers.inc
are affected.
Having do_shared_workdir in SRCTREECOVEREDTASKS means this
task is removed when externalsrc is enabled, making all
those recipes fail as the task they depend on,
virtual/kernel:do_shared_workdir, doesn't exist.
Remove do_shared_workdir from SRCTREECOVEREDTASKS so that
all those recipes work even if externalsrc is activated.
According to the comment in here, the reason for
do_shared_workdir to be removed as a task is because it
modifies the source tree, but that doesn't seem to be
case.
(From OE-Core rev: 29e99d7a57803e450920600b5d35c5b4e58a0ede)
Signed-off-by: Andre Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When IMAGE_GEN_DEBUGFS is enabled, and IMAGE_FSTYPES_DEBUGFS is left
at its default (as suggested by local.conf.sample.extended),
recipe parsing fails:
bitbake kern-tools-native # or anything else for that matter
ERROR: <poky.git>/meta/recipes-core/images/build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'debugfs_vmdk' - possibly invalid type name or missing support class
ERROR: Failed to parse recipe: <poky.git>/meta/recipes-core/images/build-appliance-image_15.0.0.bb
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
i.e. bitbake doesn't even finish parsing...
Since IMAGE_FSTYPES_DEBUGFS is based on IMAGE_FSTYPES, and
since the build-appliance-image is setting IMAGE_FSTYPES
to vmdk, image.bbclass/image_types.bbclass will be trying
to build a debugfs_vmdk, causing the error, as this is not
implemented.
One solution to solving this problem could be as simple as
adding a line
IMAGE_FSTYPES_DEBUGFS_remove = "vmdk"
to the build-appliance-image recipe, but that is very
specific to the error encountered and carries the risk of
the error being reintroduced in another recipe.
Another solution could be to add 'debugfs_vmdk' to
IMAGE_TYPES_MASKED in image-vm.bbclass, but again, this
approach doesn't seem generic enough.
None of the live and vm type images have an implementation
for building a debugfs version, it doesn't seem to make
sense to build debugfs versions of any of them anyway, and
given IMAGE_TYPES_MASKED appears to be intended for those
image types exclusively, it seems the right approach is to
unconditionally also mask all debugfs_ flavours from
IMAGE_TYPES_MASKED to achieve a generic solution.
Do that so.
(From OE-Core rev: 9bd682c4f1c19d68c573c11822888ee799809272)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The debugfs is supposed to be used in addition to the
normal image for debugging purposes, it doesn't make
sense to artificially limit its maximum size.
(From OE-Core rev: 7cdf3b2444df8cd322d9eff1bdbdc5adddcaf22a)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this a whitelisted path containing /../ breaks the test for a file
allowed to be provided by more than one recipe.
Noticed when local.conf contains:
DEPLOY_DIR = "${TOPDIR}/../deploy"
|ERROR: core-image-minimal-1.0-r0 do_image_complete: The recipe
| core-image-minimal is trying to install files into a shared area when those
| files already exist. Those files and their manifest location are:
| .../poky/deploy/images/qemux86/README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
| Matched in b'manifest-qemux86-linux-yocto.deploy'
(From OE-Core rev: d82acf20541463b14a811788d28fb1db3539885b)
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tasks for image recipes cannot be locked and should be excluded from eSDK
generated locked-sigs.inc. get_sdk_install_targets() was not returning right
image targets to be excluded incase of 'minimal' sdk. This change fixes the issue.
(From OE-Core rev: 46401034f017d234833997d2fb3122190f9029bf)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By letting a recipe assign GI_DATA_ENABLED trivially there is a simple and clear
way to disable gobject-introspection for specific build configurations.
(From OE-Core rev: 75a5297369c7b04cef098e2a76f7f8f4781764aa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By letting a recipe assign GTKDOC_ENABLED trivially there is a simple and clear
way to disable gtk-doc for specific build configurations.
(From OE-Core rev: 201e069625e3623ff71864f969664c6d5d3b1801)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 33b0d940b09a5ce1462476614213a58d3d62e80d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 79fe476be233015c1c90e9c3fb4572267b5551d1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The smart tests need createrepo to be in the native sysroot. It needs
to be one of the depends for testimage.
(From OE-Core rev: 2f1a44d33d9ecceef69d11ef92c5369314cb3bf5)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KConfig infrastructure needs to build HOST binaries in order to
provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP
variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler
is used when compiling host binaries
(From OE-Core rev: c710401a2af6488b38565e8ef32b48ed1cd0aa69)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cross-compilers are native recipes that need to be compiled by the host's
compiler. However they do not use native.bbclass
As a consequence, the various CC, CXX etc environment variables are not
correctly set and they will not honor the host compiler name provided
by the BUILD_* variables.
(From OE-Core rev: 110cc22614f92e848bbba9ecaa5e6f089f9a2749)
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If two recipes both create the same users and groups, the
second recipe can delete items created by the first causing
things like "chown" to fail for the first recipe.
(From OE-Core rev: 936150306cb13022edcadf862947c357932e80ee)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that gtk-doc-native works correctly, the gtk-doc class doesn't need to
depend on target gtk-doc.
(From OE-Core rev: 8dc4a45cc06fda29618f9f2379ed743dc0c536e3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is done similarly to gobject-introspection, but with much
less delicate hacking around the upstream way of working.
(From OE-Core rev: 1b5b429f63c323fcd46b7419a531689717a73b91)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It saves vars in ${DEPLOY_DIR_IMAGE}/<image>.qemuboot.conf, and runqemu
will read it.
The bsp which can be boot by runqemu will inherit it.
(From OE-Core rev: 1675e9b89e00b875d0da13411a2a939aa4ba5298)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10146]
(From OE-Core rev: cd5d532bd2a3f409b9470591c8d6f6b21e5995dd)
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 1868db95819b45961cd7e8499ecace403e6bc91d)
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the recent changes, executing depmod is not needed
anymore.
This simplifies and removes a lot of unnecessary code.
(From OE-Core rev: 8296e258b36a6238605e068e13c1982b1d12fe53)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The information retrieved via depmod is incomplete with
regards to kernel modules that are dependencies, in
particular where two kernel modules are built from
different source trees / recipes, which leads to incomplete
dependency information for packages created.
So far, our packages created didn't contain dependencies on
packages created by other recipes, as we solely use depmod
for that, and depmod can only work well after *all* kernel
modules have been copied into one place - it doesn't work
well in a staged approach.
Now that all .ko have correct dependency information at packaging
time, we can use that information to properly track dependencies
across recipies, and can combine the information from the
.modinfo elf section with the information from depmod.
(From OE-Core rev: e4af1fa3aee7f1cf00ca27944b10b886f41f2fda)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When compiling multiple external kernel modules, where one
depends on the other, there are two problems at the
moment:
1) we get compile time warnings from the kernel build
system due to missing symbols (from modpost).
2) Any modules generated are missing dependency
information (in the .modinfo elf section) for any
dependencies outside the current source tree and
outside the kernel itself.
This is expected, but the kernel build system has a way to
deal with this - the dependent module is expected to
specify KBUILD_EXTRA_SYMBOLS (as a space-separated list)
to point to any and all Module.symvers of kernel modules
that are dependencies.
While 1) by itself is not really a big issue, 2) prevents
the packaging process from generating cross-source tree
package dependencies.
As a first step to solve the missing dependencies in
packages created, we:
1) install Module.symvers of all external kernel module
builds (into a location that is automatically packaged
into the -dev package)
2) make use of KBUILD_EXTRA_SYMBOLS and pass the location
of all Module.symvers of all kernel-module-* packages
we depend on
This solves both problems mentioned above.
(From OE-Core rev: 88f1bc77c22091fccb00e80839adfdf34534187f)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously merge_config.sh was wrapped by the configme script, configme
took the different KCONFIG_MODES as options, and used --allnoconfig
or --alldefconfig.
With the switch to merge_config.sh no longer being wrapped, the new
processing wasn't matching the existing values and only supported
allnoconfig or alldefconfig.
To avoid breaking existing layers, and also keep any working that
have already switched, we can make the case statement match both.
(From OE-Core rev: 614227f28a023fe148307e0d85a5e9b8d9b74372)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before the kernel tools were simplified and streamlined, there was code
which not only migrated a patch/cfg/scc to the kernel build tree, it
also migrated any subdirectories of those patches.
The effect of this data migration was that any other meta data in
a patch's directory structure would be available for processing.
While we don't want to do this migration anymore, it is possible to
check the path of any SRC_URI patches, and if they include a "kernel-meta"
subdirectory add it to the search path.
This restores the functionality without the old complexity.
(From OE-Core rev: 7ef7af5c03bad28faf380986f792f7f3d4d5944d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have your own node.js application you may not publish it (or at
least not immediately) in an npm registry - it might just be in a
repository on github or on your local machine. Add support to recipetool
create for creating recipes to build such applications - extract their
dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI,
and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For
example, you can now run:
recipetool create https://github.com/diversario/node-ssdp
(I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to
implement this functionality; this should be refactored out but now
isn't the time to do that refactoring.)
Part of the fix for [YOCTO #9537].
(From OE-Core rev: 4fb8b399c05a1b66986fc76e13525f6c5e0d9b58)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CMake sets all imported headers as system headers. This causes trouble for c++
projects [1].
Thanks to Jack Mitchell for pointing to the setting [2]. Build tested upon
meta-qt5-extra-world which had lots of fallout before.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70129
[2] http://lists.openembedded.org/pipermail/openembedded-core/2016-September/126067.html
(From OE-Core rev: a5bf690e27a32c5470a4e110ab58ed0a92b9d039)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_kernel_configme calls merge_config.sh (installed in the sysroot by
the kern-tools-native recipe) which may invoke the compiler to complete
the configuration process.
Depending on the build (and dependencies), this may error due to sysroot poisoning [1].
The errors are similar to:
make[1]: Entering directory '4.1+gitAUTOINC+a7e53ecc27-r0/linux-x64-standard-build' HOSTCC scripts/basic/fixdep
work-shared/x64/kernel-source/scripts/basic/fixdep.c:106:23: fatal error: sys/types.h: No such file or directory
compilation terminated.
make[2]: *** [work-shared/x64/kernel-source/scripts/basic/Makefile:22: scripts/basic/x86_64-nilrt-linux-fixdep] Error 1
Adding $TOOLCHAIN_OPTIONS to $CFLAGS before calling merge_configs.sh
fixes the error because $TOOLCHAIN_OPTIONS defines the sysroot and make
uses it to correctly compile & fill all missing kernel config options.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2014-October/098253.html
(From OE-Core rev: 4b770d62472d1b1a26366de0a1742db240aa5239)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the updated kernel tools, we generate a list of sccs, patches,
configs and BSP definitions as part of the meta data generation.
It is valid if there aren't any of these artifacts found (i.e. you
are just building a branch and a default config), but invoking the
tools with no inputs isn't a good idea.
To avoid this issue, we generate a string based on the artifacts
and skip calling the tools if there's nothing to do.
(From OE-Core rev: 58715183493de1deb90f2ab075048462b4bf6c73)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fire TaskArtifact MetaData event for deployment tasks when task
either completed or skipped. Event contains full task id
(recipe+task) and list of deployment artifacts from sstate
manifest.
This should allow Toaster to always get notified about deployment
artifacts produced by the build.
[YOCTO #9869]
(From OE-Core rev: 9b08503eabf78bc1b114416523b41dcce3449f58)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding populate_sdk task to SSTATE_TASKS should make sstate machinery
to generate manifest for deployed ext sdk artifacts and do final deployment
to SDK_DEPLOY.
This is done in a similar way to do_populate_sdk in a previous patch.
(From OE-Core rev: ea3587e626a184c53dc0f484d1a0299b2b00641d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding populate_sdk task to SSTATE_TASKS should make sstate machinery
to generate manifest for deployed sdk artifacts and do final deployment
to SDK_DEPLOY.
Set stamp-extra-info flag for do_populate_sdk task. This flag is used
in the name of sstate manifest. Setting it to predetermined value for
populate_sdk task should help to get correct manifest filenames when
processing runQueueTask events.
The do_populate_sdk function is also executed by do_populate_sdk_ext
so in order to avoid conflicts with the sstate postfuncs, split
the main code into a separate function.
We also need to set SDKDEPLOYDIR as do_populate_sdk_ext expects
it in order not to break ESDK generation.
(From OE-Core rev: 8361376b8ef0147276c9ee31349e904d86900593)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding image_complete task should make sstate machinery
to generate manifest for deployed images and do final
deployment to DEPLOY_DIR_IMAGE.
Made sure IMGDEPLOYDIR doesn't contain images from past deployments
to prevent them to be included into sstate manifests.
Set stamp-extra-info flag for do_image_complete task. This flag
is used in the name of sstate manifest. Setting it to predetermined
value for image_complete should help to get correct manifest
filenames when processing runQueueTask events.
(From OE-Core rev: d54339d4b1a7e884de636f6325ca60409ebd95ff)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed deployment directory from DEPLOY_DIR_IMAGE to
SDKDEPLOYDIR to make sstate machinery to do final deployment and
generate manifest.
(From OE-Core rev: 1c8c8d8a0e2c73b3bb8a9a222bf5e8aa9927e526)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed deployment directory from DEPLOY_DIR_IMAGE to
IMGDEPLOYDIR to make sstate machinery to do final deployment and
generate manifest.
Renamed variable deploy_dir to deploy_dir_image in selftest code
to avoid confusion with DEPLOYDIR variable.
Updated the code of rootfs.py:Rootfs class to use IMGDEPLOYDIR variable
as it's now used as a new deployment destination.
(From OE-Core rev: 6d969bacc718e21a5246d4da9bf9639dcae29b02)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation for changing deployment directory for image
and populate_sdk targets.
Introduced new variables, IMGDEPLOYDIR and SDKDEPLOYDIR. Set it to current
image/sdk deployment locations.
(From OE-Core rev: 8969b885044eb46dba3dbf62a0243aef673443d3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The absence of signing_key.* in $kerneldir made signing of
out-of-tree kernel modules fail (silently). Add copying of these
files during the shared_workdir task.
(From OE-Core rev: 7aadc91b5ef86a89a827d59bd19e7b8272a5dd66)
Signed-off-by: Mattias Waldo <mattias.waldo@saabgroup.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a similar manner to diffconfig, tell the bitbake user where the
defconfig will be saved to.
(From OE-Core rev: 8e4cefb093e0df9660e2a6215cfe21c6c779c23f)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SSTATE_SKIP_CREATION variable will be used to skip creation of
sstate .tgz files. It makes sense for image creation tasks as
tarring images and keeping them in sstate would consume a lot of
disk space.
(From OE-Core rev: 7e821ccd221916ae8482b9113df2de704f4a99a4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
(From OE-Core rev: 765a9017eaf77ea3204fb10afb8181629680bd82)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: de720a8b10de17e613a8fb20d8df2af0b84507d7)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: 641ab36095eb72898ec808e655014bbc5900eb95)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: 4fca6c95895d7d17cdfb637d383b28ee939fbd99)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes which don't inherit autotools or cmake bbclass and want to
use the configure options from PACKAGECONFIG need to handle
PACKAGECONFIG_CONFARGS themselves.
(From OE-Core rev: c98fb5f5129e71829ffab4449b3d28082bc95ab4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To complete the transition/renaming to chained image type CONVERSION
while maintaining bacwards compatibility to COMPRESS(ION), make sure also
COMPRESS_DEPENDS is checked. Without this, the dependencies for legacy
COMPRESSIONTYPES do not get built.
(From OE-Core rev: 12a8ee44f05e21d5814e31cb9e13c9eab236b836)
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current style might be a leftover from when _class-target did not
exist.
Also change the assignment to SSTATECLEANFUNCS to an append, which makes
more sense. useradd.bbclass is the only user of SSTATECLEANFUNCS as of
writing, so it won't make any functional difference.
(From OE-Core rev: 79dd6be736211a722538a1234337ca16fefd5540)
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that the binary to be searched for contains whitespace which will
cause the search to fail, so strip any whitespace before looking.
(From OE-Core rev: 9e920abdb0f3dcfd1a94a90461ec1ddfb2729d83)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recent renaming of COMPRESSIONTYPES variable can break recipes that
still use it. Including value of COMPRESSIONTYPES variable into
CONVERSIONTYPES should prevent this.
(From OE-Core rev: 5b00d9bf5ebf2350e4a4d09b436193efba80a85c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENSE should be a superset of all LICENSE_<pkg> values. That is,
LICENSE should contain all licenses and LICENSE_<pkg> can be used to
"filter" this on a per-package basis. LICENSE_<pkg> shouldn't contain
anything that isn't specified in LICENSE.
This patch implements simple checking of LICENSE_<pkg> values. It does
do not do advanced parsing/matching of license expressions, but,
checks that all licenses mentioned in LICENSE_<pkg> are also specified in
LICENSE. A warning is printed if problems are found.
(From OE-Core rev: 0f4163a12ea431d0ba6265880ee1e557333d3211)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The loop iterating over LICENSE_pn variables has never worked. In
addition, the LICENSE variable is supposed to contain all licenses
defined in LICENSE_pn variables. Thus, it is simpler just to use LICENSE
as the data we get is essentially the same.
[YOCTO #9499]
(From OE-Core rev: d7229489c7dfd35164fd107d7944f3c273776118)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CMake wants a relative path for CMAKE_INSTALL_*DIR, an absolute path
breaks cross-compilation. This fact is documented in the following
ticket: https://cmake.org/Bug/view.php?id=14367
$sysconfdir and $localstatedir are not relative to $prefix, so they are
still set as absolute paths. With his change ${PROJECT}Targets.cmake
that are generated by cmakes "export" function will contain relative
paths instead of absolute ones.
(From OE-Core rev: c03b32bd71dbe04f2f239556fea0b53215e403d7)
Signed-off-by: Thomas Witt <Thomas.Witt@bmw.de>
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now, useradd dollar sign requires three prepending backslash characters to
avoid unintended expansion. It used to be just one prepending backslash
character before Krogoth. Restore that behaviour.
[YOCTO #10062]
(From OE-Core rev: 9e43a73c7ad576666d53c8c9e0283bc6bb9087a8)
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of just removing TMPDIR from the path for display, optionally allow a
package to be passed and remove PKGDEST/package too.
This means that messages that specify a package name can pass that name and the
resulting path will be absolute inside that package.
(From OE-Core rev: 55061a43926baf6ff0e17aed02efd299ebba3c24)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path in startup.nsh for iso image is corrupted as follows:
fs0:\EFI\BOOT^Hootx64.efi
Using printf will emit correct path which is:
fs0:\EFI\BOOT\bootx64.efi
This happens because of echo command. Switching to printf
like the one used in efi_populate() function.
(From OE-Core rev: 7540b9e68d56e7779b478d2bc09fbbedcf28976b)
Signed-off-by: Pranav Tipnis <pranav.tipnis@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"bitbake recipe -ccleansstate" should remove binary pkgs from deploy dir
as normal cleansstate does without packagefeed-stability.bbclass.
(From OE-Core rev: 0865a5b8b8fbf478fb4b2310f808bcffff84a091)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #10164]
(From OE-Core rev: 3762b42233651832c5909d7a3e873365fc0a9756)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
build_syslinux_cfg function creates syslinux configuration file.
The code assumes that the output directory exists, which is not
always the case. For example rm_work task removes rootfs directory
structure and causes build_syslinux_cfg to fail with this error:
Unable to open ../<image>-<version>/syslinux_vm.cfg
Made build_syslinux_cfg depend on output directory to ensure that
directory is created before running the function.
[YOCTO #10159]
(From OE-Core rev: c39b072fa7e96f385da338a727c67e607308d637)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This likely used to work when we expanded python functions and broke when
we stopped. Since it defaults to "", it never caused an issue but
is incorrect usage so fix it.
(From OE-Core rev: bfb395fdea642b306f110b4b8f1046f1992c622c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the enhanced functionality, the term "compression" is no longer
accurate, because the mechanism also gets used for conversion
operations that do not actually compress data.
It is possible to remove this naming problem in a backward-compatible
manner by including COMPRESSIONTYPES in CONVERSIONTYPES and checking for
the old COMPRESS_CMD/DEPENDS as fallbacks.
[YOCTO #9346]
(From OE-Core rev: 9d68c024790850cab72ead1e3372a5fcec4ef7b0)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been running with a set of kern-tools that were designed to work
with build systems that knew nothing about git, trees, commits, etc.
As such, there's been a set of shims/wrappers in place to work with
within bitbake/oe-core. These were the *me scripts: createme, updateme,
patchme and configme.
With this commit, we strip that legacy code and use the tools directly.
This means less complexity, fewer corner cases .. and no surprises
when the tools are arunning. As another benefit, the tools consume
much less time during a typical build and have no noticeable impact
on the overall build time.
Existing .scc files, features, and processing are not impacted as
these tools are compatible with existing feature descriptions and
kerne configuration fragments.
The audit of kernel configuration fragments is now detached
from the linux-yocto build structure and process. This means that
they can eventually be tweaked to offer kernel audit to any type of
kernel build and configuration process.
Additionally, the kernel symbol audit phase can now resolve symbol
dependencies and offer guidance when a symbol is missing:
WARNING: linux-yocto-4.4.15+gitAUTOINC+b030d96c7b_f5e2c49d58-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
---------- CONFIG_BT_6LOWPAN -----------------
Config: CONFIG_BT_6LOWPAN
From: /home/bruce/poky/build/tmp/work-shared/qemux86-64/kernel-source/.kernel-meta/configs/standard/features/bluetooth/bluetooth.cfg
Requested value: CONFIG_BT_6LOWPAN=y
Actual value:
Config 'BT_6LOWPAN' has the following conditionals:
BT_LE && 6LOWPAN (value: "n")
Dependency values are:
BT_LE [y] 6LOWPAN [n]
(From OE-Core rev: 0f698dfd1c8bbc0d53ae7977e26685a7a3df52a3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We expect that any package that uses the npm bbclass
will have a runtime dependency on node.js
(From OE-Core rev: 769fae0b74d7c7992aa593907f446fab98ef5128)
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preparation script itself prints out an error on failure, and we
aren't redirecting its output anymore, so we no longer need to print out
a message here when it fails. At the same time, make the message printed
out by the script a little clearer - we're just writing the log out to
the file, we shouldn't give the user an expectation that there will be
extra details in there (other than the output produced by
oe-init-build-env there won't be).
(From OE-Core rev: 80dfaf40e087b34d6360188df372c1c3805a00bd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check a number of things as early as possible in the eSDK installer
script so that the user gets an error up front rather than waiting for
the build system to be extracted and then have the error produced:
* Check for missing utilities specified in SANITY_REQUIRED_UTILITIES
(along with gcc and g++), taking into account that some of these are
satisfied by buildtools which ships as part of the SDK. We use the
newly added capability to list an SDK's contents to allow us to see
exactly which binaries are inside the buildtools installer.
* Check that Python is available (since the buildtools installer's
relocate script is written in Python).
* Check that locale value set by the script is actually available
* Check that the install path is not on NFS
This does duplicate some of the checks in sanity.bbclass but it's
difficult to avoid that given that here they have to be written in shell
and there they are written in Python, as well as the fact that we only
need to run some of the checks here and not all (i.e. the ones that
relate to the host system or install path, and not those that check the
configuration or metadata). Given those issues and the fact that the
amount of code is fairly small I elected to just re-implement the checks
here.
Fixes [YOCTO #8657].
(From OE-Core rev: 6e6999a920b913ad9fdd2751100219c07cd14e54)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Determine the name of the current buildtools installer ahead of time,
set it in a variable and use that variable rather than the wildcarded
version everywhere, since it's much tidier.
(From OE-Core rev: d5a601db41ba3c561aced7f5a38689f6b4c9a87c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the buildtools installation failed, we were using a subshell instead
of a compound command and thus the subshell exited but the script
continued on, which is really not what we want to happen. Additionally
log the buildtools installer output to a file and cat it if it fails so
that you can actually see what went wrong, as well as amending the
environment setup script to print a warning as we do when the
preparation fails.
(From OE-Core rev: 8fb8adf309823660c3943df973c216621a71850d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple of fixes for the recent sstate filtering implemented in OE-Core
revision 4b7b48fcb9b39fccf8222650c2608325df2a4507:
* We shouldn't be deleting the downloads directory here, since it
contains the uninative tarball that we will need
* TMPDIR might not be named "tmp" - in OE-Core the default is tmp-glibc
so use the actual name of TMPDIR here instead.
(From OE-Core rev: 71ecd3bea680ef8c589257844512a14b65e979d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the build in which the eSDK is being built isn't using uninative,
this will have an effect on NATIVELSBSTRING, which will mean that the
eSDK installer won't be able to find any of the native sstate packages.
To keep things simple, under this scenario just disable uninative
temporarily while we run the SDK installer to help us check the presence
of the sstate artifacts we need. Ideally I'd rather not have things like
this that are artificial in this verification step, but on the other
hand this was the least ugly way to solve the problem.
(From OE-Core rev: 9f39deea7c4af5244dbfa824a52e11590a1d4df6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were relying on uninative being enabled in the build in which the
eSDK was being produced, which is not the case for example for OE-Core's
default configuration. Move the code that copies the uninative tarball
and writes the checksum to copy_buildsystem so that it happens early
enough for that part of the configuration to be set up when we do the
filtering (which requires running bitbake).
(From OE-Core rev: 7bc95253098aca2ff195b159b34d9ac041806c75)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the ccache directory as part of do_clean is unnecessarily
conservative and defeats many of the benefits of ccache.
The original justification for this behaviour was to avoid confusion
in the corner case that the ccache directory becomes corrupted.
However the standard approach for dealing with such highly unlikely
corner cases (ie manually removing tmp) would also recover from
corruption of the ccache directories, without the negative impact of
defeating ccache during normal development.
(From OE-Core rev: 6ae6680ad8d51eff756dcb6500fca2530e3e3e73)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If /bin/sh is a regular file (and not a symlink), we assume it's a
reasonable shell and allow it.
(From OE-Core rev: eaa0dc21a5f058a39bd7867bd3cafdb3407abe36)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default the system will expand the extra os entries for uclibc and musl
even if they are not enabled in the build. There was no way to prevent this
behavior while still getting the expansion for things like x32 or spe.
The change adds a new setting which a distribution creator can override
easily, setting the base set of canadianextraos components. The other
expansions are then based on this setting.
(From OE-Core rev: ea24d69fdf7ebbd7f2d9811cff8a77bffc19a75c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the code gives tracebacks if there are no recipes to be built in a
BuildStarted event. Parse the list into a string rather than just taking the
first item. There is nothing special about the first time.
(From OE-Core rev: 684a3d56ef393b56f38d3272f8865f6225a282ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
This allows us to reduce the time that the rpm.lock is held to only the
time needed to hardlink the RPMs, allowing the majority of the rootfs
operation to run in parallel.
Also, this fixes the smart tests by generating an index for all packages
at the time of the test, rather than using the one provided by the
rootfs process.
Original credit for the enhancement should go to Steven Walter
stevenrwalter@gmail.com.
(From OE-Core rev: a92c196449c516fe51786d429078bbb1213bb029)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prior to running oe_runmake make sure $B is the cwd. This is required
due to bitbake commit 67a7b8b021badc17d8fdf447c250e79d291e75f7
"build: don't use $B as the default cwd for functions".
Without this change, do_concat_dtb fails with:
| ERROR: oe_runmake failed
| make: *** No targets specified and no makefile found. Stop.
(From OE-Core rev: 6dca3dee34b587157d0d49c590a177ff1dabb374)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle u-boot.rom signing (U-Boot as x86 BIOS replacement) the same way
that u-boot.img signing is handled.
(From OE-Core rev: 94e3f427bbeb005d8443e9d822c3182f280df470)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For x86, bzImage must be built instead of zImage.
Include setup.bin (which is required to boot the kernel) in the fitimage
and always use a load/boot address of 0x00090000.
For details see:
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/uImage.FIT/x86-fit-boot.txt
(From OE-Core rev: 1a65d11d4b8f056fdf22c31a92d1e58dec6d89f6)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If INITRAMFS_IMAGE is set, build an additional fitImage containing the
initramfs. Copy the additional fitImage and the source (*.its) file, used
to create it to DEPLOYDIR. The fitImage containing the initramfs must be
built before do_deploy and after do_install to avoid circular dependencies.
UBOOT_RD_LOADADDRESS - Specifies the load address used by u-boot for the
initramfs.
UBOOT_RD_ENTRYPOINT - Specifies the entry point used by u-boot for the
initramfs.
(From OE-Core rev: b406a89935f148779569fa3770776e009dd51f13)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Prior to assembling the fitimage, ensure that $B is the cwd due to
bitbake commit 67a7b8b021badc17d8fdf447c250e79d291e75f7 "build: don't
use $B as the default cwd for functions".
Without this change, do_assemble_fitimage() fails like:
Log data follows:
| DEBUG: Executing shell function do_assemble_fitimage
| arm-ka-linux-gnueabi-objcopy: 'vmlinux': No such file
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_assemble_fitimage
(From OE-Core rev: 42d50e8f5f3a98e50a0f50473ebc83dc6347b634)
Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix multilib + rpm since its multilib package name is special.
* Update SSTATE_DUPWHITELIST to avoid shared location conflicted error.
* Fix message when "not copying", now the messages are:
Copying packages for recipe <foo>
Not copying packages for recipe <foo>
(From OE-Core rev: 647fc7913c3d1f98efe36f01fd4e0edf2366e1a6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a non-functional change, which intends to correct element
names of a tuple returned by Popen.communicate().
Both in python2 and python3 subprocess.Popen.communicate() method
returns a tuple (stdoutdata, stderrdata), thus old assignments and
collateral comments are incorrect from human's point of view, however
formally there is no error in the code.
The change is desired to have to avoid copy-paste errors in future.
(From OE-Core rev: cdd9bae381deb15ac84e11a39f9d72f2757c1583)
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a non-functional change, which intends to correct element
names of a tuple returned by Popen.communicate().
Both in python2 and python3 subprocess.Popen.communicate() method
returns a tuple (stdoutdata, stderrdata), thus old assignments and
collateral comments are incorrect from human's point of view, however
formally there is no error in the code.
The change is desired to have to avoid copy-paste errors in future.
(From OE-Core rev: f8c21df86bae5a85e221b69b91b347aeba6be4c3)
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, find_license_files() in license.bbclass just blindly assumed
that all different licenses specified in LIC_FILES_CHKSUM have unique
filenames. As a consequence, only the last one of these similarly named
license files was copied and the rest were "lost". This patch changes
the behavior so that all license files get copied. However, if multiple
identically named files are found, they are renamed to <file>.0,
<file>.1 etc.
The patch also changes the handling of NO_GENERIC_LICENSE slightly.
Previously, only basenames of NO_GENERIC_LICENSE and LIC_FILES_CHKSUM
were compared when searching for the correct license file. After this
patch NO_GENERIC_LICENSE must have the full path, matching what is
specified in LIC_FILES_CHKSUM. This is required in order to be able
to handle identical filenames (basenames) consistently. For example, if
you have:
LICENSE = "my-custom-license"
LIC_FILES_CHKSUM = "file://src/LICENCE;md5=d41d8cd98f00b204e9800998ecf8427e"
you must specify:
NO_GENERIC_LICENSE[my-custom-license] = "src/LICENCE"
[YOCTO #9663]
(From OE-Core rev: d5e1375884e509ec745bac43f1f7f7950f62f280)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code was outputting variables by iterating a dictionary. In Py2 this
always results in the same iteration order but with Py3 the order changes every
execution, which resulted in buildhistory having to store diffs where fields
were simply re-ordered.
(From OE-Core rev: f9faa8df85317d12743134a44576b4882a9fb22a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example in a directory structure like this
.
├── symlink -> foo/bar
└── foo
└── bar
└── file
'file' could be referenced by specifying e.g. 'foo/bar/file' or
'symlink/file'. In cases like this populate_packages() might crash if
the file was referenced (in FILES) via the symlinked directory. The
outcome depends on how the user defined FILES_pn. This patch should
make the function behave more consistently. It looks for files which are
referenced via symlinked directories and handles them separately,
failing if their parent directory is a non-existent path. For example,
defining FILES_{PN} = "symlink/file" causes a build failure because
symlinks target 'foo/bar' is not included at all.
[YOCTO #9827]
(From OE-Core rev: 29d1738329ddf4e63844a9ad1158a1d41e2ee343)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The mode and owner info are saved in inode, hardlink won't change them,
so remove unneeded chmod() and chown().
* This can avoid the problem that when do_package re-run, the file's mode
maybe different if it is 0444 (changed to 0644 when re-run), this is
caused by pseudo adds 'w' on real file, and doesn't track linked source
when hard link, Peter and Mark may fix pseudo, but the removed code is not
needed, which can avoid the problem.
* To reproduce the problem, for example, version.c from gzip's ${B}:
1) bitbake gzip
2) Edit rpm-native or package.bbclass to make do_package re-run.
3) bitbake gzip
After the first build, build/version.c in gzip-dbg is 0444, but after
the second build, it will be 0644, this because do_package does:
$ ln ${B}/version.c gzip-dbg/version.c,
$ chmod 0444 gzip-dbg/version.c (it runs chmod 0644 on the real filesystem)
And in the second build, the gzip-dbg/version.c will be removed and
created again, so that stat() can't get 0444 but 0644 since
${B}/version.c is not tracked by pseudo.
(From OE-Core rev: 26ab4b431da0c00010e8d399f890c5fbf0b03c94)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the initramfs image is type lzo, then a native lzop is needed.
(From OE-Core rev: ee0640cb0c32b959ffaaac6752d582ed1d76e313)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to ensure that builds use our intltool.m4 as there is a bug in
upstream's macros when the host doesn't have XML::Parser installed.
So generalise the m4 pruning logic that we already have from gettext and add
intltool.m4.
(From OE-Core rev: 342fa2b8407552a962e7c78d0e4de7b2d0b30041)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To save time move the temporary copy of the autoconf macros, aclocal-copy, from
${B} to ${WORKDIR}. This ensures that it can't conflict with anything in ${S}
and means the pruning code doesn't need to know about it.
(From OE-Core rev: d7249c5cce6fbc7875c46f2452ca8cd045773898)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 6a8b9599945f3f57bd86a205bc107b8490518d29)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure that we have a pristine source tree after do_unpack.
[YOCTO #9064]
(From OE-Core rev: eccae514b71394ffaed8fc45dea7942152a334a1)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently packages that contains symlinks can't be extracted
and exported. This allows to export extracted such packages.
A nice side effect is improved readability.
[YOCTO #9932]
(From OE-Core rev: 0338f66c0d246c3b8d94ac68d60fbc4c314e500b)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
newval is not defined in all cases. Set to None and check if it is set.
File
"/local/foo/builds/x86/layers/openembedded-core/meta/classes/multilib_global.bbclass",
line 90, in preferred_ml_updates(d=<bb.data_smart.DataSmart object at
0xf6fd528c>):
if not d.getVar(newname, False):
> d.setVar(newname, localdata.expand(newval))
# Avoid future variable key expansion
UnboundLocalError: local variable 'newval' referenced before assignment
(From OE-Core rev: 25ebd3bbc1f9f4b1b6147d98dd43690c3bf03ee7)
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tasks relied upon [dirs] being ${B} by default. As the functions are not
simple, add back [dirs] so they work again.
[ YOCTO #10027 ]
(From OE-Core rev: 614d976ee97d6386c37afb54add5b83741ca401e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CFLAGS/CXXFLAGS in the SDK environment script adds debug-prefix mappings
that include staging area/work directories. Remove them since the SDK
shouldn't be aware of them.
(From OE-Core rev: 7918e73e9c5fe8c8c1c1d341eaa42f2f7d3ddb69)
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This addresses (among others) the following problem:
- USERADD_ERROR_DYNAMIC=error causes a recipe to get skipped
because a static ID entry is missing
- the entry gets added to the file
- using the recipe still fails with the same error as before
because the recipe gets loaded from the cache instead
of re-parsing it with the new table content
(From OE-Core rev: 799c93592a9aac571d6dc05529437c0eec7b08b8)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to get more information about systemd boot process to
be able to debug random failures due to high I/O.
[YOCTO #9299]
(From OE-Core rev: a0bb64973e767c3b8e0bae18ee84ed92693922f0)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently when a recipe adds more than one user/group, the
cleansstate task will delete only the first user/group. This
will solve this behavior and delete all users/groups.
[YOCTO #9943]
(From OE-Core rev: da191d5c139a6b400d1b8fe246912b081dd18176)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I got fed up with seeing items dance around in sstate-package-sizes.txt
in the buildhistory git repo simply because they have the same size.
Let's sort the list first by size and then also by name to ensure items
with the same size are deterministically sorted.
(From OE-Core rev: 7340c1ea677731d21351d47d935d9de7d7e2eda5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SDK_INCLUDE_PKGDATA and SDK_INCLUDE_TOOLCHAIN to the variables that
we put into sdk-info.txt
(From OE-Core rev: 4bf5be6a1fc39f367bbb59e1787cb55e7b5835ae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SDK_EXT_TYPE is set to "full" then we really ought to be shipping
everything that is expected to be in the SDK, and that includes gdb
(it's already referred to by the environment setup script if nothing
else). This is implemented by using the SDK_INCLUDE_TOOLCHAIN
functionality I just added, since the only material thing that adds on
top of a full SDK is gdb and we should always have the rest of it in a
full SDK anyway.
Fixes [YOCTO #9850].
(From OE-Core rev: 9872dcc25c5cdfb99bda197db08476085f8c7ecc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new oe-check-sstate to filter the sstate artifacts shipped with
the extensible SDK by effectively running bitbake within the produced
eSDK and and getting it to tell us which tasks it will restore from
sstate. This has several benefits:
1) We drop the *-initial artifacts from the minimal + toolchain eSDK.
This still leaves us with a reasonably large SDK for this
configuration, however it does pave the way for future reductions
since we are actually filtering by what will be expected to be there
on install rather than hoping that whatever cuts we make will match.
2) We verify bitbake's basic operation within the eSDK, i.e. that
we haven't messed up the configuration
3) We verify that the sstate artifacts we expect to be present are
present (at least in the sstate cache for the build producing the
eSDK). Outside deletion of sstate artifacts has been a problem up to
now, and this should at least catch that earlier i.e. during the
build rather than when someone tries to install the eSDK.
This does add a couple of minutes to the do_populate_sdk_ext time, but
it seems like the most appropriate way to handle this.
Should mostly address [YOCTO #9083] and [YOCTO #9626].
(From OE-Core rev: 4b7b48fcb9b39fccf8222650c2608325df2a4507)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're to completely replace the standard SDK with the extensible SDK,
we need to be able to provide the standard toolchain on install without
doing anything other than installing it, so that you can install the SDK
and then point your IDE at it. This is particularly applicable to the
minimal SDK which normally installs nothing by default.
NOTE: enabling this option currently adds ~280MB to the size of the
minimal eSDK installer. If we need to reduce this further we would have
to look at adjusting the dependencies and/or the sstate_depvalid()
function in sstate.bbclass which eliminates dependencies, or look at
reducing the size of the artifacts themselves.
Implements [YOCTO #9751].
(From OE-Core rev: ed0d8ed72370df694f720cc13897493478dc1de9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a meta-recipe to bring the toolchain into the extensible SDK. This
was modelled on meta-ide-support but some adjustments were needed to the
dependency validation function in sstate.bbclass to ensure that all of
the toolchain gets installed into the sysroot. With this, after
installing a minimal eSDK you only need to run the following after
sourcing the environment setup script to get the toolchain:
devtool sdk-install meta-extsdk-toolchain
Addresses [YOCTO #9257].
(From OE-Core rev: 8110806b1b5534ae830a4fdd1a5293c86a712d0b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't absolutely need this - it doesn't change the default
behaviour, but it seems to me we have a convention to set default values
so we should add one here.
(From OE-Core rev: 4c734df1df3c19b0dabb9da5b4dc86b966a0d71c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake rev 67a7b8b02 "build: don't use $B as the default cwd for
functions" (included in current bitbake master) breaks the assumption
that do_bundle_initramfs runs inside the build directory.
This causes kernel_do_compile() as called from within
do_bundle_initramfs() to fail, as the former is not being executed
from the correct directory anymore. (Note that kernel_do_compile()
as called from bitbake directly doesn't suffer from that problem,
as it inherits the workdir from base_do_compile() in that case.)
Set workdir explicitly.
(From OE-Core rev: 4455da22a151c2ac006af63cbd39779b21b12580)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The replace() method of the python string class doesn't replace
in-place, then the var KERNEL_IMAGETYPE_FOR_MAKE doesn't be updated as
design.
(From OE-Core rev: 392fc3cd276d5029314c7158245bc65dd82279cd)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only check that ${S} actually exists if there was something in ${SRC_URI} to
fetch, the argument being that if SRC_URI is empty the the recipe won't be using
${S} at all.
In general recipes that have no sources can remove the unpack task, but
expecting all recipes to do this relatively advanced operation isn't realistic.
(From OE-Core rev: 8cba511ab6ea557fab9f7838dfe1fc8284bbdd68)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recipes can generate several rpms such as a.rpm, a-dev.rpm, a-dbg.rpm,
when update one of them in the repo, we'd better update all of them,
otherwise, there might be a-dev.r0.1.rpm and a-dbg.r0.3.rpm in the repo,
which looks strange.
(From OE-Core rev: 2a7f203dbe4fda5dba9137503e93669392719aba)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fix for python3
iteritems() -> items()
* Return immediately for native and cross.
* Remove the usage of __BBDELTASKS, there is no such var in bitbake.
(From OE-Core rev: ccfc13adedd97f57024420639053080e047529dc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a dependency causes a recipe to effectively be rebuilt, its output
may in fact not change; but new packages (with an increased PR value, if
using the PR server) will be generated nonetheless. There's no practical
way for us to predict whether or not this is going to be the case based
solely on the inputs, but we can compare the package output and see if
that is materially different and based upon that decide to replace the
old package with the new one.
This class effectively intercepts packages as they are written out by
do_package_write_*, causing them to be written into a different
directory where we can compare them to whatever older packages might
be in the "real" package feed directory, and avoid copying the new
package to the feed if it has not materially changed. We use
build-compare to do the package comparison.
(From OE-Core rev: cc8b1a93912f830e605e6249c446b3764e550863)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dict.fromkeys() creates a dict without order, there might be a
problem when build the same recipe again, for example:
- First build of make:
Provides: es-translation, make-locale
- Second build of acl:
Provides: make-locale, es-translation
They are exactly the same Provides, but tools like "diff" doesn't think
so. Sort RPROVIDES will fix the problem.
(From OE-Core rev: 3506172d7d9f8d92362b6ebb75582b7c3e662dae)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't modify an OrderedDict while walking its keys.
(From OE-Core rev: eb7f08c4c01313afc8350200eeb63daefde8a6f6)
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the extensible SDK installation process the final step is to
prepare the internal copy of the build system. This can take some time,
especially if you have SDK_EXT_TYPE set to "minimal" (downloading
sstate artifacts) and SDK_INCLUDE_PKGDATA set to "1" (restoring
pkgdata for world). To make this a bit less painful, use BitBake's new
quiet mode to display status during this operation so you have some idea
of how it's progressing; instead of redirecting the output to
preparing_build_system.log we grab the last console log and append it
instead.
One result of this change is that you get the errors printed on the
console during normal output rather than this going to the
preparing_build_system.log file first. In OE-Core revision
227d2cbf9e0b8c35fa6644e3d72e0699db9607fa, we changed to always print the
contents of preparing_build_system.log on failure, but now at least the
error contents of that log is duplicated. Besides, I intentionally
didn't print out the contents of that log during normal usage because
it's quite verbose - the bug that we were attempting to fix was about
not getting this information when seeing failures in the automated
tests, thus I've moved printing the log to the test handling code
instead.
Part of the implementation for [YOCTO #9613].
(From OE-Core rev: 0f7cb880c934b7871f3b8432f4f02603300f6129)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to add a new architecture or sub-architecture to OE, you currently
need to tweak the table in siteinfo.bbclass. This adds a mechanism so this
can be done from a BSP layer. It needs a function definition which needs
a class file but can then be done with something like:
def rp_testfunc2(archinfo, osinfo, targetinfo, d):
archinfo['testarch'] = "little-endian bit-32"
osinfo['testos'] = "common-linux"
targetinfo['mymach-linux'] = "mymach-linux-common"
return archinfo, osinfo, targetinfo
SITEINFO_EXTRA_DATAFUNCS = "rp_testfunc2"
[YOCTO #8554]
(From OE-Core rev: 2718bb9f2eabc15e3ef7cb5d67f4331de4f751d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to add a new architecture or sub-architecture to OE, you currently
need to tweak the table in insane.bbclass. This adds a mechanism so this
can be done from a BSP layer. It needs a function definition which needs
a class file but can then be done with something like:
def my_testfunc(machdata, d):
machdata["testmachine"] = {
"test64": ( 8, 0, 0, False, 32),
"testel": ( 8, 0, 0, True, 32),
}
return machdata
PACKAGEQA_EXTRA_MACHDEFFUNCS = "my_testfunc"
[YOCTO #8554]
(From OE-Core rev: c57550c9cca598315ba4408e44b138cecc22b8a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the functionality checks for the "u" and "g" flags to create users and
groups, but not the "m" flag to add users to groups. This change first checks to
be sure that the users and groups are created, creates them if necessary, then
adds the user to the group.
(From OE-Core rev: f0a77bee3d092cf79b7e584b943a623eddd6e13d)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This task runs all functions in IMAGE_QA_COMMANDS after the image
construction has completed in order to validate the resulting image.
Image sanity checks should either be Python functions which raise
bb.build.FuncFailed on failure or shell functions with return a
non-zero exit code.
Python functions may instead raise an oe.utils.ImageQAFailed
Exception which takes an extra argument, a description of the
failure.
python image_check_python_ok () {
if True:
raise bb.build.FuncFailed('This check always fails')
else:
bb.note("Nothing to see here")
}
image_check_shell_ok () {
if true
exit 1
else
exit 0
fi
}
[YOCTO #9448]
(From OE-Core rev: c9bef2ecf1a30159d11781184829f41844a58c13)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to set these as the restore from sstate will create the
directories as required.
(From OE-Core rev: 3ab3ebc06d22f0776091e39237235ea50c4503b2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use IMAGE_CLASSES which is only seen by image recipe.
(From OE-Core rev: 7be8f1a9dad4512c3a979ad744e223edb38fccc6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To remove potentially personal information and reduce irrelevant noise when
searching for similar reports the error reporting class removes ${TOPDIR} from
the logs. Whilst this is valid intention, the replacement of ' ' results in
potentially confusing logs as it appears that builds are happening in /tmp, or
whitespace can appear in places where it isn't allowed which can look like a
bug.
Solve both of these by replacing the value of TOPDIR with the literal string
TOPDIR.
Also replace TMPDIR after TOPDIR, as it's not uncommon to have TMPDIR somewhere
other than directly under TOPDIR.
(From OE-Core rev: 95794e261628f83ddab0aa7b8bafb6409cc9deb5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently PV is defined in meta/conf/bitbake.conf as a python
expression: "${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE',
False),d)[1] or '1.0'}". As FILE is whitelisted it causes PV to
not depend on it. This causes sstate code to not detect that
PV changes when recipe filename changes.
Making PV to explicitly depend on PV variable value overrides default
behaviour. Instead of depending on python expression bitbake depends
on evaluated value of PV variable, which should fix the above
mentioned issue.
[YOCTO #9806]
(From OE-Core rev: 918646ca803d56004fb0ab7c21e86cc9cb14513d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These files are treated as the contents of a bitbake variable, so usual
bitbake variable references are supported. I considered using another
templating mechanism, for example the one used by yocto-layer, but then we'd
end up largely mapping metadata variables to template fields anyway, which is
a pointless indirection. Let bitbake expand the variables directly instead.
This feature lets us, for example, reference ${APPEND} in --append, and avoid
hardcoding the serial console tty in the wks file, and let the user's changes
to APPEND affect wic the way they do the other image construction mechanisms.
The template is read in and set in a variable at parse time, so changes to the
variables referenced by the template will result in rebuilding the image.
(From OE-Core rev: 51cb21fe5f050874d52f5b05a8a1de79ea4ebf2f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a bit nicer to work with, and easier to override.
(From OE-Core rev: 44f1d3cc613563b8d5be61a2648d0cd336fea728)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also delete the removal of suduko for qemumips, as galculator builds fine on
that hardware now.
(From OE-Core rev: 4a81b3f669073455c9b2ee1514c43b96df9f7faa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can reach the method in toaster.bbclass which tries to read from
the files-in-image.txt file via a build which doesn't create that
file (e.g. "bitbake core-image-minimal -c rootfs"). This causes
the build to fail with an exception.
Check that this file exists before trying to read from it.
[YOCTO #9784]
(From OE-Core rev: 8b369cdd73ab17cdf834a591b97b25840caeb740)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
toaster.bbclass does a scan of the image deploy and SDK directories
when a build finishes. However, this brings no benefit and could be
better managed and made easier to modify if moved to toasterui and
carried out when the BuildCompleted event occurs.
Remove the image scan code from toaster.bbclass, prior to moving it
to toasterui and buildinfohelper.
Also remove the license manifest update code, as this can also be
done from toasterui.
The postfuncs for do_populate_sdk are retained, but no longer
do the directory scan for SDK artifacts. Instead, they fire
an event with the value of the TOOLCHAIN_OUTPUTNAME variable,
as this is only accessible at the point when the do_populate_sdk
and do_populate_sdk_ext tasks are run. The value of this can then
be used by buildinfohelper to find the SDK artifacts produced by a
target.
[YOCTO #9002]
(From OE-Core rev: 67ebb5406c0fcdd1b28bf446249aa6fe34a741a8)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang
Paul Eggleton
Khem Raj
Linus Wallgren
Richard Purdie
Markus Lehtonen
André Draszik
Alexander Kanavin
Ross Burton
Christopher Larson
Robert P. J. Day
George McCollister
Nathan Rossi
Mikko Ylinen
Vesa Jääskeläinen
Saul Wold
Martin Jansa
Ed Bartosh
Juro Bystricky
Joshua Lock
Fabio Berton
Mark Hatle
Zubair Lutfullah Kakakhel
Stephano Cetola
Peter Kjellerstedt
Aníbal Limón
Ulf Magnusson
Raymond Tan
André Draszik
Ioan-Adrian Ratiu
Patrick Ohly
Otavio Salvador
Andreas Müller
Mariano Lopez
California Sullivan
Andre McCurdy
Max Krummenacher
Amarnath Valluri
bavery
Jérémy Rosen
Joe Slater
Henry Bruce
Bruce Ashfield
Mattias Waldo
Stefan Müller-Klieser
Thomas Witt
Maxin B. John
Pranav Tipnis
Jonathan Liu
Olof Johansson
Andrew Bradford
Vladimir Zapolskiy
Trevor Woerner
Jeremy Puhlman
Jacob Kroon
Kai Kang
Matt Madison
Elliot Smith