* Fixed:
The netmap has been blacklisted in
meta-networking/recipes-kernel/netmap/netmap_git.bb, but lib32-netmap still can
be built (suppose it doesn't depend on another broken recipe netmap-modules, it
is a little complicated, will talk below):
$ bitbake lib32-netmap
This is because of the old code masks on bb.event.ConfigParsed which can only
handle global blacklist, netmap sets blacklist in the recipe, so it can't be
handled, and lib32-netmap can be built. which was incorrect:
blacklist_multilib_eventhandler[eventmask] = "bb.event.ConfigParsed"
Move multilib code into multilib.bbclass can fix the problem easily:
$ bitbake lib32-netmap
ERROR: Nothing PROVIDES 'lib32-netmap'
ERROR: lib32-netmap was skipped: Recipe is blacklisted: BROKEN: <foo>
* Not fixed
Another problem is netmap-modules has also been blacklisted in the recipe, and
the recipe inherits module.bbclass, so multilib.bbclass doesn't handle it as the
code shows:
# There should only be one kernel in multilib configs
# We also skip multilib setup for module packages.
provides = (e.data.getVar("PROVIDES") or "").split()
if "virtual/kernel" in provides or bb.data.inherits_class('module-base', e.data):
raise bb.parse.SkipPackage("We shouldn't have multilib variants for the kernel")
And netmap-modules provides lib32-netmap-modules which is handled in
multilib_global.bbclass, so bitbake lib32-netmap-modules can't show
the blacklist message:
$ bitbake netmap-modules
ERROR: Nothing PROVIDES 'netmap-modules'
ERROR: netmap-modules was skipped: Recipe is blacklisted: BROKEN: <foo>
ERROR: netmap-modules was skipped: We shouldn't have multilib variants for the kernel
$ bitbake lib32-netmap-modules
ERROR: Nothing PROVIDES 'lib32-netmap-modules'. Close matches:
netmap-modules
netmap-modules
lib32-fbset-modes
Note the different messages between netmap-modules and lib32-netmap-modules.
This is because multilib.bbclass doesn't handle the "module" recipe so
there is no PN called lib32-netmap-modules, therefore blacklist.bbclass can't
handle it.
Note, there are two "netmap-modules" which needs to be fixed later.
(From OE-Core rev: c8749ed1edcbb544f6656ee5da80f2cf647c405a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10995]
I applied some revisions to the related sections for incrementing
a binary package version and revision sections. Mainly clarified
terminology and pulled the sections into one single section head.
I also cleaned up referencing to all these sections throughout the
YP manual set (i.e. the ref-manual).
(From yocto-docs rev: 7deda18dd496cc383c5de71a10f2b11b1ca0688f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10995]
For the dev-manual, I added a new section on incrementing package
revision numbers that explains how the build system uses various
variables to create linearly numbered revisions for packages.
For the ref-manual, I cross-referenced into the new section from the
AUTOSRC and SRCREV variables.
(From yocto-docs rev: 53c3092e0f0293f4db0a88659abb4cf1c93f208c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8596]
Added a new section to describe the right way to use headers to
interface to a device or custom Linux kernel API. Too often a
user wants to modify the libc header file, which absolutely wrong.
This new section provides some guidance.
(From yocto-docs rev: 960c49bf6446398a9efb2d018d09d63b49e97196)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11274]
When a post-installation or pre-installation script uses tools that
have dependencies, you need to specify the tools using the new
PACKAGE_WRITE_DEPS variable. I added this information at the end
of the "Post Installtion Scripts" section in the dev-manual.
I also added a new variable entry for the PACKAGE_WRITE_DEPS variable
in the glossary.
(From yocto-docs rev: 4d130b63cba5ebabd4af52b62421d387a4b54353)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10887]
I placed a small paragraph at the end of the introduction to the
"Performing Automated Runtime Testing" section that points into the
new section on QA and testing infrastructure in the ref-manual.
(From yocto-docs rev: 493051e1770e07b89c19a1f235f1dd226610c77a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10887]
There needed to be an overview of the test and QA infrastructure
used by the YP development team for releases and that is visible
to the developer. I added a new section for this information into
the existing section on YP release processes.
(From yocto-docs rev: 17b3d6898b37bdbfbd23a333a4d659a9746696d0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10596]
No information existed for the version 1.0 YP Compatibility Program
for layers. Additionally, the version 2.0 flavor is adding a script
as part of the application process. I put in a new section on the
whole topic. Also, integrated the information into relevant sections
with some cross-referencing.
(From yocto-docs rev: 6341705d4c08901b2657c489f4e995968db00d85)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is common for *ash shells to have 'command' available as a built-in
function. POSIX 2008 also documents the availability of this command.
Additionally the /etc/profile of base-files requires this command to be
available as of commit e77cdb7611 ("base-files: profile: Do not assume
that the tty command exists"). If it is not available the following
message is output during login on a image using busybox.
-sh: command: not found
It however should be noted that tcsh and csh do not provide 'command'
(built-in or otherwise).
(From OE-Core rev: e41c90b852167bbcb434da57b84280e855acae33)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes/variables that raise a SkipRecipe exception are intentionally
skipped, and should not generate warnings.
[YOCTO #11319]
(Bitbake rev: edf6e6094a9f7ad4b2ba06eef8fd34756edbedce)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We clear append/prepend on newly set variables, we should also clear
remove operations. If we don't do this, there is no way we can actually
delete a remove operation. Bitbake internally uses parsing=True to avoid
these side effects when making its own internal calls.
Also add a testcase to bitbake-selftest to ensure we remain consistent going
forward from here.
(Bitbake rev: 3a319f079d699c870d8531e051ab65e6278d1fa5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed dependency to core-image-minimal rootfs from the
recipe and .wks file. This was a bad idea as recipes are
not allowed to use other recipe's rootfs or anything else
from workdir.
This should also fix test_qemu test case when rm_work is
enabled.
(From OE-Core rev: 0f1879982ab6006f14ac2c9f5546a7b1f79460cd)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new --addditional-layers parameter takes a list of layer
directories and adds them to the build configuration before starting
testing. The resulting base configuration then more closely matches
a full distro.
This is relevant in two cases:
1. some layers like meta-freescale dynamically enable more recipes
in their layer.conf depending on which other layers are active,
so testing only against OE-core might miss problems which occur
only when also some other layers are active
2. BSP layers might be fine in combination with machines from
OE-core, but might break in combination with some other machines
As before, test_signatures only warns about signature changes
introduced by the layer which is under testing, and not those changes
introduced by the additional layers.
(From OE-Core rev: 0e8528f7c6201e8a5d2799123241c0e1b85081ce)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
locked-sigs.inc groups tasks according to their tune flags (allarch,
i586, etc.). Also retrieve that information while getting signatures,
it will be needed to determine when setting a machine changes tasks
that aren't machine-specific.
(From OE-Core rev: 67f9a8759f47680dbf349797801b2a1e8d149377)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After filtering out potential false positives, it becomes feasible to
include the output of bitbake-diffsigs for those tasks which
definitely have a change.
Depends on bitbake-diffsigs with the "--signature" parameter.
Enhanced output now is:
AssertionError: False is not true : Layer meta-xxxx changed 120 signatures, initial differences (first hash without, second with layer):
gstreamer1.0-plugins-base:do_fetch: 76973f19f2e30d282152bdd7e4efe5bb -> e6e7c6fa9f2bd59d7d8d107f7c6ca1ac
Task dependencies changed from:
['PV', 'SRCREV', 'SRC_URI', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]', 'base_do_fetch']
to:
['GST_IMX_PATCHES_TO_APPEND', 'PV', 'SRCREV', 'SRC_URI', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]', 'base_do_fetch']
basehash changed from d679d30bd1ea41c56e57419b57587f3c to 090a79b45f5fa26d10f9d34e2ed7a1e6
List of dependencies for variable SRC_URI changed from '{'PV', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]'}' to '{'GST_IMX_PATCHES_TO_APPEND', 'PV', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]'}'
changed items: {'GST_IMX_PATCHES_TO_APPEND'}
Dependency on variable GST_IMX_PATCHES_TO_APPEND was added
Variable SRC_URI value changed:
" http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-${PV}.tar.xz file://get-caps-from-src-pad-when-query-caps.patch file://0003-ssaparse-enhance-SSA-text-lines-parsing.patch file://0004-subparse-set-need_segment-after-sink-pad-received-GS.patch file://encodebin-Need-more-buffers-in-output-queue-for-bett.patch file://make-gio_unix_2_0-dependency-configurable.patch file://0001-introspection.m4-prefix-pkgconfig-paths-with-PKG_CON.patch file://0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch file://0002-Makefile.am-prefix-calls-to-pkg-config-with-PKG_CONF.patch file://0003-riff-add-missing-include-directories-when-calling-in.patch file://0004-rtsp-drop-incorrect-reference-to-gstreamer-sdp-in-Ma.patch [--] {+${GST_IMX_PATCHES_TO_APPEND}+}"
pulseaudio:do_install: 6bb6fe23e11a6d5fef9c3a25e73e4f9c -> 3f54ea75673a792e307197cfa6ef2694
basehash changed from ac4efcfa783bd04a5a98a2c38719aedd to 37679d99623a37c8df955da3a01415a5
Variable do_install value changed:
@@ -1,3 +1,7 @@
autotools_do_install
install -d ${D}${sysconfdir}/default/volatiles
install -m 0644 ${WORKDIR}/volatiles.04_pulse ${D}${sysconfdir}/default/volatiles/volatiles.04_pulse
+ if [ -e "${WORKDIR}/daemon.conf" ] && [ -e "${WORKDIR}/default.pa" ]; then
+ install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
+ install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
+ fi
[YOCTO #11161]
(From OE-Core rev: 312edd42b6cc553de4d476c76e8e36a882e11cdd)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"yocto-compat-layer.py --machines" showed that shared packages like
gcc-cross-powerpc64 have a sstate signature that depends on
TUNEFLAGS. As a result, there are unnecessary rebuilds and potential
conflicts in a multiconfig.
That's due to the way how TARGET_ARCH is set. Richard Purdie suggested
setting TARGET_ARCH[vardepvalue] as fix, which works. It would be
shorter to do that in cross.bbclass instead of repeating the relevant
line in different recipes, but Richard was concerned about potential
side-effects in other usages of cross.bbclass.
TARGET_GOARM as used in go.inc is still causing signature differences
for go-cross-powerpc64 and machines b4420qds-64b and p5020ds-64b. This
needs further investigation.
(From OE-Core rev: 39bfa0dd3237cbca47e7fca1075d521f9d073f25)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gdb-cross used to be specific to the tune flags, but isn't
anymore. Therefore it is enough to use TARGET_SYS instead of
TUNE_PKGARCH to create a unique path.
Fixes a sstate signature difference that was found via
yocto-compat-layer.py's test_machine_signatures check. In practice it
probably showed up as unnecessarily rebuilding gdb-cross when
switching between machines like intel-corei7-64 and qemux86-64.
(From OE-Core rev: f346473a4868563db7fb63665e808c3fe25a8b58)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libgcc gets compiled differently depending on the tune flags for the
target. That dependency would make go-cross also tune specific and
prevent sharing it between different machines using the same
architecture.
For example, MACHINE=intel-corei7-64 and MACHINE=qemux86-64 shared the
same go-cross-x86_64, but compiled libgcc differently.
The libgcc dependency gets inherited from go.inc, but does not seem to
be necessary for go-cross (compiling go-helloworld still succeeds).
The dependency is left in go.inc conditionally, just in case that it
really is relevant for the various on-target recipes which inherit
that.
Because go-cross*.bb includes go*.bb, moving the DEPENDS into a .inc
file that only gets included for the target recipes doesn't
work. Reshuffling the content of three .bb files seems too intrusive
at this point.
(From OE-Core rev: 58149a7be4172074349951aaf5af95fa40fd4bdb)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream has removed the 1.14.1 release from ftp.gnu.org and
moved to the latest 1.14.2. Since we don't want to upgrade at
this point of time, temporarily move the SRC_URI to yoctoproject
mirror.
(From OE-Core rev: a2f1026b3d8c9f9810cb4389a8a93fabb04e15a4)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There seems to be little advantage to letting distro features affect
native builds. There is a significant disadvantage: a change to
DISTRO_FEATURES will trigger a lot of unnecessary native tasks. In a
test like this:
$ bitbake core-image-minimal
# append " systemd" to DISTRO_FEATURES
$ bitbake core-image-minimal
The latter build takes 44 minutes (28%) of cpu-time less with this
patch (skipping 135 native tasks). Sadly wall clock time was not
affected as glibc remains the bottleneck.
Set native distro features to DISTRO_FEATURES_NATIVE appended with
an intersection of DISTRO_FEATURES and DISTRO_FEATURES_FILTER_NATIVE.
Current default values (baitbake.conf) are
* DISTRO_FEATURES_FILTER_NATIVE ?= "api-documentation" (as gtk-doc-native
has much less dependencies when built without it)
* DISTRO_FEATURES_NATIVE ?= "x11" (to enable native UIs even if target
does not containe them)
Do the variable setting in native_virtclass_handler() because otherwise
it could still be overridden by appends and the feature backfilling.
Shuffle the early returns so DISTRO_FEATURES gets set as long as
the packagename ends with "-native".
Add similar variables for nativesdk.
To make nativesdk work we need to enable the locale options so
nativesdk-glibc-locales can build and to avoid the init manager check
in the nativesdk case so add those fixes.
(From OE-Core rev: 731744d5538e315702be828e6f2bd556309dee07)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds repo_name as the name, which is the same as the
repo ID and hence a bit pointless, but it stops dnf from
complaining that the repo doesn't have a configured name.
(From OE-Core rev: c92cff23893e87cfb7ef9f77b16761310104543a)
Signed-off-by: Ian.Arkver <ian.arkver.dev@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, runqemu grep root=/dev/sd or root=/dev/hd on the image, and
would use vda if no grep result, now we have set QB_DRIVE_TYPE to
"/dev/sd" by default, and the device will be /dev/sda, so use sda to
replace vda in the test case.
(From OE-Core rev: a722016df3f452f7a870157a99a1abb7d97d8280)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new parameter 'api' to sparse_copy function to specify
underlying filemap API to use. By default sparse_copy will
try both available APIs.
Added test case for sparse_copy to wic test suite.
(From OE-Core rev: 88701cef6ba399e82f96ed1b0eef9a44ed8c1687)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, runqemu grep root=/dev/sd or root=/dev/hd on the image, and
would use vda if no grep result, now we have set QB_DRIVE_TYPE to
"/dev/sd" by default, and the device will be /dev/sda, so use sda to
replace vda in the test case.
(From OE-Core rev: 3f1f42984021d87ac43aaa16f38b706c2c965e02)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can use self.rootfs as self.nfs_dir when self.fstype is nfs, this can
reduce the code's complexity and we can re-use the code of checking
ROOTFS conflictions.
(From OE-Core rev: 1aafa13ae6faf620acac7338c42a8838e75da6b9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, runqemu grep root=/dev/sd or root=/dev/hd on the image, and
would use vda if no grep result, now we have set QB_DRIVE_TYPE to
"/dev/sd" by default, and the device will be /dev/sda, so use sda to
replace vda in the test case.
(From OE-Core rev: aa8df7e17bb4bb0a92938cbc36cd8b22bcf14cfa)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when the image is large and not enough memory:
grep: memory exhausted
Aborted
[YOCTO #11073]
(From OE-Core rev: a99deb30a0138594147ae28aab016fe4b74b8959)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we can get MACHINE and others from env vars and "bitbake -e",
"runqemu" can work without any arguments.
(From OE-Core rev: 9ebcb2b6f41420ae3686afad03bb26a68cfacf95)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use self.env_vars to support get vars from environment explicity. The
MACHINE, ROOTFS and KERNEL was supported by shell based runqemu, and
the help text says support them from env vars, so add them back.
[YOCTO #11141]
(From OE-Core rev: 20008d0bfe2cacecba77e11b0a0faf3d959eaf1e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To fix a problem when print ERROR after a ptest timeout, this
causes the user confusion about if a test ends or not.
[YOCTO #10842]
(From OE-Core rev: 210c518ba8f8d6ec6e9d34e0df8b963a3b2e0593)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch ensures videometa is added to mem2mem decoder output in case
the output frames have padding rows/columns
(From OE-Core rev: ef94ffee8f11db57ecea398af76dc22576c2068a)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 5acad7f33aebfac4c5a3a68778f5860f954904fe)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dependencies on svn:// urls were failing as the cleandirs on do_fetch was destroying
any sysroot setup by the extend_recipe_sysroot function.
Add code so that if the task do_fetch, we move the cleandirs to a separate function before
the extend_recipe_sysroot prefunc else we'd wipe out the sysroot we just created.
This allows fetcher do_populate_sysroot dependencies to work correctly again.
I did try various other approaches and a seperate function with cleandirs was the
cleanest way to add this without code duplication or too much complexity.
(From OE-Core rev: b32fbfc85b14059f0bfdeeffe2c52f8d3c20f276)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport upstream commit to address vulnerabilities:
CVE: CVE-2017-6965
[BZ 21137] -- https://sourceware.org/bugzilla/show_bug.cgi?id=21137
Fix readelf writing to illegal addresses whilst processing corrupt input
files containing symbol-difference relocations.
PR binutils/21137
* readelf.c (target_specific_reloc_handling): Add end parameter.
Check for buffer overflow before writing relocated values.
(apply_relocations): Pass end to target_specific_reloc_handling.
CVE: CVE-2017-6966
[BZ 21139] -- https://sourceware.org/bugzilla/show_bug.cgi?id=21139
Fix read-after-free error in readelf when processing multiple, relocated
sections in an MSP430 binary.
PR binutils/21139
* readelf.c (target_specific_reloc_handling): Add num_syms
parameter. Check for symbol table overflow before accessing
symbol value. If reloc pointer is NULL, discard all saved state.
(apply_relocations): Pass num_syms to target_specific_reloc_handling.
Call target_specific_reloc_handling with a NULL reloc pointer
after processing all of the relocs.
(From OE-Core rev: 8c52a530ba2beb438aa47956bcec3777a1eafe5f)
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, they were previously squashed into a single patch; restore
the original two-patch arrangement.
As requested here:
http://lists.openembedded.org/pipermail/openembedded-core/2017-April/135460.html
(From OE-Core rev: 378b333fb09d106fb04901f5a4362fc0eb076e82)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move config/Makefile in libdir from core package to dev package for
python, because it is only needed in development process.
(From OE-Core rev: 8b55d055f046677c18eeaefe3ca18869eedeb14d)
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was causing a couple of ptest failures.
[YOCTO #10840]
(From OE-Core rev: 2e8e72790d3cc3236b6a785f3e04702e71e1ac3f)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All build project test cases will try to copy the requested source
artefacts from DL_DIR before fetching. This testcase is referencing bzipped
tarball whereas the recipe fetches a gzipped tarball.
Switch to fetching the gzipped tarball in the test case so that we're able
to use a cached tarball from DL_DIR
(From OE-Core rev: 27a5883e8ae01e69f5425efe8b035bea7087b2f9)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the TaskArtifacts event to scan the SDK and ESDK manifests
to cleanly collect the respective artifact files.
The previous method was broken when the SDK file deployment moved
from the do_populate_sdk[_ext] tasks to their sstate tasks. That
method is disabled (but not yet removed) in preparation for the
rest of refactor work for the parent #10283 work.
[YOCTO #10850]
(From OE-Core rev: a6ec56d372f833be50f57bcb79b6ebe78bb93be0)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Save a file per task listing sha256sums for each file staged, i.e.
the output of the task. Some caveats:
1) This only covers sstate tasks since it uses SSTATEPOSTUNPACKFUNCS,
however those are generally the most interesting in terms of output
anyway.
2) The signature is taken before applying any relocations, so any
relocated files will actually have different signatures, but that's
churn that you probably won't want to see here.
3) At the moment if you run the same build twice without sstate you will
very likely see changes in the output for certain tasks due to things
like timestamps being present in the binary output. Fixing that is
a general Linux ecosystem problem - see this page for our efforts to
resolve it on our side:
https://wiki.yoctoproject.org/wiki/Reproducible_Builds
NOTE: you need to set your BUILDHISTORY_FEATURES value to include
"task" to enable collection of these signatures as it is is disabled by
default.
(From OE-Core rev: ca5d1273432e20059ab66d721a9eb314a54e81e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Append to the value with appendVarFlag() instead of setting it outright,
so that we can also append to it in other places. Accordingly, this
varflag is pipe-separated (since we want to be able to exclude any
string fragment, in this case including the leading space), thus put a
leading pipe character to play nicely with any existing value.
(From OE-Core rev: a147838c3dfd4c53084a19b052b8d4e183293412)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the code underpinning bitbake-diffsigs to add an option to
buildhistory-diff to determine and display the differences between the
actual signature inputs, with a twist - we collapse identical
changes across different tasks, showing only the most recent task to
have that difference, meaning that there's less noise to wade through
when you just want to know what changed in order to cause some
rebuilding you're seeing.
(From OE-Core rev: 86cb4b01f2020553902554e512c02147eb4e0f51)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having added writing out of the task signature list to buildhistory
(when BUILDHISTORY_FEATURES includes "task"), we now need a way to
compare the list. This just shows which tasks have been added / changed
signature / removed.
(From OE-Core rev: 63bd7e9f780a98dda458d612877495756bcc5463)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want to determine what changed since the last build, one angle
from which to look at it is to check the signatures. However, if we
don't actually have the signatures from the last build we don't have
anywhere to start. Save the signatures on each build in order to give us
the starting point.
NOTE: you need to set your BUILDHISTORY_FEATURES value to include
"task" to enable collection of these signatures as it is is disabled by
default.
(From OE-Core rev: 11f68f65c46c5bc26ddeeade3021e83b3a7f895a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the cwd is named "buildhistory" and the user hasn't specified an
alternative path on the command line, then assume that the current
directory is the buildhistory directory. This makes it easier to run
buildhistory-diff and also interact with the buildhistory git repository
as you no longer have to jump into the buildhistory directory and up to
the parent again when doing so.
(From OE-Core rev: e4ccec2e4c2f521a2bb473083b42aefd494eea23)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* 54807d47 aarch64: add single instruction math functions
* b6e1fe0d fix strptime output for %C without %y
* 834ef7af fix processing of strptime %p format
* 85dfab7e fix off-by-one in strptime %j
* 9571c531 regex: fix newline matching with negated brackets
* e6917ece increase limit on locale name length from 15 to 23 bytes
* e4fc9ad7 search locale name variants for gettext translations
* 16319a5d make setlocale return a single name for LC_ALL if all categories match
* 0c53178e fix dlopen/dlsym regression opening libs already loaded at startup
* dbff2bb8 fix POSIX-format TZ dst transition times for southern hemisphere
* 74bca42e s390x: fix fpreg_t and remove unused per_struct
* a393d5cc precalculate gnu hash rather than doing it lazily in find_sym inner loop
* 8cba1dc4 fix threshold constants in j0f, y0f, j1f, y1f
(From OE-Core rev: 340b3fa6be034bf6a4cd9b2d1ad4788668fabb5b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fedorahosted.org was retired on March 1st, 2017. This is to
update the SRC_URI to point to github.com.
Update the ${PN} to ${BPN} in order to pass the autobuilder
mulitlib enable configuration.
[YOCTO #11226]
(From OE-Core rev: 73a358bdef99771b493fefb5114a936138cb78ce)
Signed-off-by: Choong YinThong <yin.thong.choong@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Yang
Scott Rifenbark
Nathan Rossi
Richard Purdie
Ed Bartosh
Patrick Ohly
Maxin B. John
Jussi Kukkonen
Ian.Arkver
Aníbal Limón
Carlos Rafael Giani
Yuanjie Huang
Alexander Kanavin
Li Zhou
Joshua Lock
David Reyna
Andre McCurdy
Paul Eggleton
Khem Raj
Choong YinThong