Paul Eggleton reviewed the section.
(From yocto-docs rev: 82d9750b4349b3c54f73118ec7d65f0bb96e3f7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the "Customizing an Image Hostname" section from Ross.
Updated the last paragraph to not imply incorrect information.
Fixes [YOCTO #7417]
(From yocto-docs rev: 8997be297077ee0052a5afbe50b9864cdef14058)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7417]
New section to address how the user can change the devalt image
hostname written out to /etc/hostname.
(From yocto-docs rev: 4ac6bc05947e56106aafcc6f9aef93bd93293fba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently, copying HTML displayed commands that have a
double dash created through "‐‐" in the docbook source
causes some issues in the shell. I have scrubbed the manual set
to replace any "‐‐" strings with "--".
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e88b813b71d7d6d8acd8a8638f2db71265145b64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These kernels are unsupported for the 1.8 release. They will still
show up in the YP source repos but the recipes are removed from the
poky area. Updated all references appropriately.
(From yocto-docs rev: a9adc071409fd31dabc3affec12350c300312600)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording to be more accurate.
(From yocto-docs rev: 1acb7ce94a4f4b02cc50d1e098f04a77d9a53ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the last paragraph example as it is not a good example.
Unfortunately, there is not a good example so I replaced it with
a minor suggestive work-around at the end of the first paragraph.
Also, used some <replaceable></replaceable> formatting for the
first paragraph.
(From yocto-docs rev: 6c3989fd4fe41a6434d70208d59747060e62a366)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7256]
In the "Serial Console Connection" section there was a link to
TEST_POWERCONTROL_CMD when it should have been to the
TEST_SERIALCONTROL_CMD variable.
(From yocto-docs rev: 9ec64c86bd4171a017898daa332d2a98fea0358a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for "tc" was described as "the called text context..."
rather than "the called test context...". Updated the description.
Fixes [YOCTO #7269]
(From yocto-docs rev: 0da4437c26225ce0302f10f7ba3c012f1f990c74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed draft of the new devtool material. This commit affects
some linking and figures across the YP doc set.
* Added the build-workspace-directory.png file to both the
dev-manual and the mega-manual.
* Updated the Makefile to include the new figure in the TARFILE
for dev-manual and mega-manual.
* Re-did the section organization to pull the quilt and finding
source file out of the "Modifying Source Files" section.
(From yocto-docs rev: 4585b9fbb1636ae3c65e2e3ad2d1d6baca636e59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This start to the script is not really necessary and is in fact
the rare case. I have removed two occurrences of it in the
"Post-Installation Scripts" section where it was used in code
as the best form to create a script.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f7c1a1e135e8a9d76005bb6ae7b9cc2810f0af90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on "Handling a Package Name Alias" was confusing and
wrong. We decided to eliminate it. The section was removed from
the dev-manual. The corresponding variable DISTRO_PN_ALIAS
remains for now but without the cross-reference link to the
now missing section.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 9938cdcc8488baffa4252288bf45243055e76fed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrubbed out the occurrences of eglibc and replaced them with
glibc.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 868ceda79b1c738349e512e523c850b24f9232ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example was out of date. Updated accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b95535fca149abbbe4fee7e74ebc13d2bb376c27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated some text to indicate that you should put patch files
in $BP, $BPN, or "files." Also, added more on how the patch
files suffix is (i.e. accounting for compressed suffix names
like diff.bz).
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: d9e23da24e9d86ec5e2b9d4067667478f3e56ba1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch files can end with compressed suffixes such as
diff.gz and patch.bz2.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 69993710d1466dddc804c33c1d76f46d0982d28f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Fetching Code" section, some loose description of how the
build system reacts to the two checksums in a recipe existed.
Robert asked some questions about how the behavior would be if
just a single, correct checksum existed and if the two existed but
only one proved correct. Turns out, if you supply a single one then
the build will not throw an error or warning. If you supply two
but one is incorrect, then the build will throw an error or
warning. I updated the text to be technically correct without
going into huge details.
(From yocto-docs rev: f49a744821d9326314803d5003158bd402e74e0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to the original patch. These edits were caught by
Robert P. J. Day.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b50a2e44eccd50166351611f17c643cbbc60f8b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was modified to fit in with the style of the book.
(From yocto-docs rev: 7c6c7ac573f92bfc844977e0d7a97ca4aac9bc70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bob Cochran pointed out that the skeleton recipe shown in the
example is not really what is created by newbb.vim. I updated the
example to match.
(From yocto-docs rev: 2dfa712522aec5204b9e739b6060109090280011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was a bit confusing on the use of "_prepend" as associated
with the FILESEXTRAPATHS statement. Especially in the final note
where it indicated you don't need "_prepend" if your append file
is not adding any new files. I updated the note to be more specific.
Another small change I made was to replace the Crown Bay BSP referenced
in the section with the Emenlow BSP, which has a longer life span than
CB.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 35bdc8031bc4ecf1ea321b0cafade97eeaa56513)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Customizing Images Using Custom IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES" needed a bit more clarification on
the image features. The text pretty much passed off image
features as all mapping into package groups, which is not true.
Some, like "debug-tweaks for example, are more like general
configurations. I updated the section accordingly.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 7dd55ff0bd6f7923e22695ed7323df5cfe17d1d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was pointing to a poor example in meta. I substituted
in a better example and rewrote the section to flow better around
that example and the final fabricated one.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c7f07a2993d5c1b8e0c8b7da0e9d4c28242a5e26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
Per Martin Jansa, added some information in the bullet item that
talks about the tools and the cases that can cause issues when
tuning things by machine or architecture.
(From yocto-docs rev: e8e47828df65abdc18bbd681c47719a7df77b00f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
I applied some review edits to this section as suggested by
Richard Purdie.
(From yocto-docs rev: a1898cf65537e732e0e42605bb28d636077e7f56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5400]
This is the first draft of a new section on multi-machine builds.
(From yocto-docs rev: a47fd17295d943bff482a0747f3b2e69831aa985)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section to account for some new variables and
several more ways to run tests against expanded targets. Also
added power control section.
(From yocto-docs rev: a0f08466c00ae51a99d790fa6c9dccef2e0f1518)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5482]
Added a cross-reference to the meta-selinux layer in the section
that describes how to make images more secure.
(From yocto-docs rev: 0c96273ee857808046c5a76517c1eda4aa703c81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a short note after the example that shows how to set up
the EXTERNALSRC variables stating that the externalsrc class
needs to be either globally or locally inherited.
(From yocto-docs rev: db935135c0b060e06f6a63530df995d286002598)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new example on how to set this from the recipe or the
recipe's bbappend file.
(From yocto-docs rev: bc0d9de3378f3462729301e74419b7dede17558b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another occurrance of where I needed to add a <replaceable>
tag set in an example.
(From yocto-docs rev: 586e5a590bb5382a28fde4670fdcd6cbb75f6c32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I missed a <replaceable> tag set on the example. Adding it
clears up confusion for how to use the variable.
(From yocto-docs rev: 8bbf2a012e580d82aaf9c9a98ad5dab1aea64f7b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Found and fixed several areas with issues.
* Scrubbed for user-supplied input to make it use the
<replaceable></replaceable> tags.
(From yocto-docs rev: 0e1c7ad31921ee7d4ee0d7d4ece01303a25a5d60)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6621]
Applied a few review edits for this fix.
(From yocto-docs rev: 99511bbcfa1de2f7bf691da1a002913f3a7f6034)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6620]
I altered the path name of the .gdbinit file in the text to prepend
~/ to it to reinforce what file the user must modify. I also removed
the /home/jzhang string in favor of ~ to make it more general.
(From yocto-docs rev: ff09d3a5666c97598adf385f63dee4b30b0f1792)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits from Paul to better word this section.
(From yocto-docs rev: 51425ab506050ee5ba30d5c3c10639d5a1b8cc8e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These catches are from Robert P. J. Day and applied as a
patch.
(From yocto-docs rev: b805795e9bf68286aa5b79a94792e2fefd293b92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Claudius Heine
Robert P. J. Day
Pascal Bach