Also fix DEPENDS on gettext for native casea -- this is to fix the
following failure(that occasionally occurs in my local tests):
configure.in:44: warning: AM_NLS is m4_require'd but not m4_defun'd
| aclocal.m4:1826: IT_PROG_INTLTOOL is expanded from...
| configure.in:44: the top level
| configure:3327: error: possibly undefined macro: AM_NLS
Also remove a trailing space char in LIC_FILES_CHKSUM.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Also apply four patches from Koen to fix four issus:
- The tv-out gets added last and the driver tries to reconfigure dvi to TV resolutions, which fails
- The new DSS mode breaks XV, so force plain mode
- Picture is garbled after switching resolutions
- Virtual size too big
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Yu Ke <ke.yu@intel.com>
This is an intial commit for the license reporting system. A few notes:
The LICENSE fields needs to be standardized throughout poky. As it
stands, we throw a warning if the license file is not found (either
because it does not exist or because LICENSE_FILE_CHKSUM is munged)
in the generic license directory. This should eventually become an
error.
I've seen a few places where Apache-v2.0 is written differently and
I'm sure this will throw the above warning. This does not put the
license data on the rootfs. Also, I provide both the actual license
text and a link to the best guess of the generic_license. That guessing
is not very robust and I'm loath to get into a bunch of pattern matching
rather than standardize LICENSE.
This adds one new param to poky.conf and one new to license.bbclass:
LICENSE_DIR: the base directory we copy all the license results to (set
in license.bbclass)
COMMON_LICENSE_DIR: this is the directory that holds all the common
generic license files. currently meta/files/common-licenses (set in
poky.conf)
TODO:
- We should verify the common-licenses. I stripped these from my Ubuntu
10.10 system.
- We should allow the capability of licenses on the rootfs, although the
resulting image created would be a lot larger.
- More common-licenses. I don't include bzip, zlib, ICS.... I should,
but that means tracking down a lot of licenses.
- General cleanup of licensing and standardization of names. We should
standardize on a naming convention. What's in licenses.conf should
match up with what is in the recipes which should match with what is
in common-licenses. Outside the scope of this though. See:
http://bugzilla.pokylinux.org/show_bug.cgi?id=650
these two are useful in the development environment, and also required
by two LTP test cases (ld and ldd).
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
though bash is included in LSB profile, it doesn't use update-alternative
to take effect and thus it's still busybox behaving as /bin/sh.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
now the PATH for root user defined in a problematic way
PATH=$PATH:/usr/local/sbin:/usr/sbin:/sbin:
from eglibc:
/* Two adjacent colons, or a colon at the beginning or the end
of `PATH' means to search the current directory. */
that means current directory is always searched as the last path,
which could generate undesired behavior.
One example is found in LTP cron_deny01 test, which always complains
"sh: cron_deny01 not found"
cron_deny01 is a shell script which setups the initial test preparation
and then invokes itself for real test under a different user:
su $TEST_USER1 -c "$0"
'su' doesn't inherit PATH into the sub-shell, and thus $0 has to
be an absolute path to have right script found.
ltp appends the path of cron_deny01 to $PATH before running the test:
export PATH="${PATH}:${LTPROOT}/testcases/bin"
In ideal way "${LTPROOT}/testcases/bin/cron_deny01" is found and becomes
$0, which works well.
However due to the ending colon in original PATH:
PATH=/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin::${LTPROOT}/testcases/bin
$0 becomes 'cron_deny01' w/o leading path which makes sub-shell under 'su'
failed to locate cron_deny01.
remove ending colon then fixes this problem.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
The server UI was reading 1024 bytes, then sleeping for 0.25 seconds. Since
most new LogRecord events are larger than this it leads to a build up of data
which is only processed slowly, leading to a bottleneck and a slow down of
all bitbake processes.
Thanks to Dongxiao Xu <dongxiao.xu@intel.com> for the great work in debugging
this. A large value has been left in for the read() command just to ensure some
fairness amongst process handling if a task tries to log truly huge amounts of
data to the server, or goes crazy and ensures the main loop doesn't stall.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest version of Berkley DB (5.1.19) is required by RPM. This version
is backwards compatible with the 4.2 version that was enabled previously.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Remove disable-gio-png-sniff-test.diff as it alreay in upstream. gdk-pixbuf in
gtk+ is separated as another stand-alone package, so remove it.
In future need only pick up stable version(even number like 2.20.x, 2.22.x).
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
The judgement on ${MACHINE} is meaningless, remove it in order to avoid
being rebuild on second machine.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
We need to manipulate the stamps when removing WORKDIR to indicte that
tasks like compile or install can't just rerun. The most effective method
to do this is to convert the layout to match that which would have been the
case had the system been build from sstate packages.
For example, we'd task stamps like:
xxx-1.4.7-r3.do_compile
xxx-1.4.7-r3.do_configure
xxx-1.4.7-r3.do_fetch
xxx-1.4.7-r3.do_generate_toolchain_file
xxx-1.4.7-r3.do_install
xxx-1.4.7-r3.do_package.emenlow
xxx-1.4.7-r3.do_package_write
xxx-1.4.7-r3.do_package_write_ipk
xxx-1.4.7-r3.do_package_write_rpm
xxx-1.4.7-r3.do_patch
xxx-1.4.7-r3.do_populate_sysroot.emenlow
xxx-1.4.7-r3.do_setscene
xxx-1.4.7-r3.do_unpack
and after rm_work, we'd have stamps of:
xxx-1.4.7-r3.do_package_setscene.emenlow
xxx-1.4.7-r3.do_package_write_ipk_setscene
xxx-1.4.7-r3.do_package_write_rpm_setscene
xxx-1.4.7-r3.do_populate_sysroot_setscene.emenlow
We also need to handle stamps in the form xxx-1.4.7-r3.do_package.MACHINE.TASKHASH
as used by some signature generators.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 94629f2521 removes the FROM header when
sending via sendmail to avoid sending mail as the original change committer (as
opposed to the local user). This resulted in mail going out without any FROM
header, which some mailing lists correct by adding the *bounce address as the
FROM.
Correct this by reading FROM from the environment, from a new -f argument, or
from the git user.name and user.email config settings, in that order of
preference. Also display the FROM that will be used prior to the send
confirmation.
This has no effect if the -g (send via git) argument is specified, other than
printing the git sendemail.from config setting.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Reported-by: Saul Wold <saul.wold@intel.com>
As the first of several changes to the kern-tools coupled to
the branch management in the yocto kernels the repository
is being renamed to it proper name. This change switches us to
that newly created repo.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Depending on the architecture you are booting and the profile of the
filesystem image QEMU might come up in a new shell, and existing shell,
have a GUI, or be in command-line mode. I added a note indicating this
behavior.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The value for the 64-bit architecture was "x86-64" and not "x86_64".
Changed it to be correct.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The section that introduces the using a pre-built binary section needed
more items in the list. I added text for setting up the environment
and for starting QEMU.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The pre-built image section was one long section that naturally
broke into several areas. I inserted some sub-sections for better
organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added the exact architecture strings for each of the five supported
architectures as part of the /opt/poky/environment-setup.... commands
resulting from installing the toolchain tarballs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Updating SRCREVs to reflect:
perf: hard-code NO_LIBPERL/NO_LIBPYTHON
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Dexuan Cui
Yu Ke
Beth Flanagan
Kevin Tian
Zhai Edwin
Richard Purdie
Mark Hatle
Saul Wold
Joshua Lock
Dongxiao Xu
Darren Hart
Bruce Ashfield
Scott Rifenbark