Applied review comments from Paul Eggleton to the section on
migrating to the 1.6 version of YP.
(From yocto-docs rev: ffd224a16cef4d643cc2c527ad8dc5e15d715faa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some links to the arichiver class. Also updated the example
to use the new ARCHIVER_MODE variable.
(From yocto-docs rev: 0774ddd2f83586c61f71f1b251fd559ccca45f50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The set of archive* classes has been removed leaving only the
archiver.bbclass.
(From yocto-docs rev: 1660896b47ff5d21ae73d383505063f1c7c1a3b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the referencing to adjust to the emergence of the
archiver.bbclass and disappearance of the archive* classes.
(From yocto-docs rev: 903e9b7c534e65e1be3eb0dc57378e120c7a0e3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out that the user does not set these variables.
(From yocto-docs rev: b016906dad7e3d7856935e83e5c9b09cfa399caa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to CONFFILES should change the sstate checksum. To make that happen,
it needs to be listed in the list of package specific variables, therefore
add it.
(From OE-Core rev: 9db71fa03b9d5f5307b2d09e7aa89f46f622aa09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Relaced the key with the join between path and file name.
[YOCTO #6090]
(From OE-Core rev: 85ffc93becb31772107a5a63b09fd3c16160f3ca)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path for "recipes/images/" was not added in BBFILES when Hob had
to search for an image recipe. Therefore, it could not find it and an
error occurred.
This path needs to be added when Hob is launched.
[HOB #6086]
(Bitbake rev: 35c67281775b08925957c32663d587d486944e0e)
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if a file listed in SRC_URI was missing at the time of
parsing, and then was added and bitbake run again, it would not be
picked up because the recipe was cached without it. If we allow the file
to be added to the list of files to checksum, then it will be checked
for and found on the second run.
Fixes [YOCTO #4790].
(Bitbake rev: 71da822762cb298261cccdfa54b9c0fea02c3c5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a while its been puzzling me why connman-gnome rebuilds as often as it
does. It turns out you can trigger this with a new checkout of the metadata.
The SRC_URI that is causing the problems is:
SRC_URI = "file://images/*"
and rather oddly the results in checksums for a file "." being added to
the tree, e.g.:
('.', 'ab48a68186f0e0f277c21ef4cb390b4b')
The problem is that when iterating files lists, the checksum variable can
become set yet we don't break the out from the for loop, which leads to
odd (and non-deterministic) entries being added into the file checksum list.
The exact item added probably depends on the order of items on the disk.
Before this change, bitbake-diffsigs on connman-gnome:do_fetch would report:
This task depends on the checksums of files: [
('connman-signal-03.png', 'f6c16aee57b37b73793a2f1dea433ffa'),
('connman-signal-02.png', 'ad0cd22710c097d8174121fc1023c3be'),
('connman-signal-01.png', '8842bd83d2fa9ba56480df34c727c629'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('connman-signal-05.png', '808589e7e8d502b44c7b007e9e68d48c'),
('connman-signal-04.png', 'ab48a68186f0e0f277c21ef4cb390b4b'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('.', 'ab48a68186f0e0f277c21ef4cb390b4b')]
Afterwards:
This task depends on the checksums of files: [
('connman-signal-03.png', 'f6c16aee57b37b73793a2f1dea433ffa'),
('connman-signal-02.png', 'ad0cd22710c097d8174121fc1023c3be'),
('connman-signal-01.png', '8842bd83d2fa9ba56480df34c727c629'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('connman-signal-05.png', '808589e7e8d502b44c7b007e9e68d48c'),
('connman-signal-04.png', 'ab48a68186f0e0f277c21ef4cb390b4b'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85')]
which is correct and deterministic without the "." entry.
(Bitbake rev: f9416e76e272ba3249abff099f6f3a47fe82e03e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* newer bitbake is printing some messages to stderr, we want to log
them as well
(From OE-Core rev: f442c15aaeb8c0641093e92f2b832dfaa2d9a486)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This moves the systemtap recipe to the current HEAD commit, in order
to get users past some bugs affecting ppc and arm.
Fixes [YOCTO #6016]
(From OE-Core rev: efac179f243459c53d0431fbcce92a3561b40956)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix the bootlogd init script header, to make chkconfig be able to work
on bootlogd
(From OE-Core rev: d1a7e5dbaa1217b692b46e2756c318e5aaa34f9d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that linking to the built-in.a file uses the 'nostlib'
option. Submitted to busybox mailing list here:
http://lists.busybox.net/pipermail/busybox/2014-March/080730.html
This has been accepted into upstream busybox so it will not be needed
for future versions.
(From OE-Core rev: fdfff57304e6641ef5a8db0fb456bfd46bf1e2dd)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the CCLD variable to ensure proper tuning parameters.
Notably when building on a x86-64 host with an i686 toolchain
there is an error building built-in.o because it is trying to
link 32-bit and 64-bit object files:
i686-pc-linux-gnu-ld --sysroot=/work/dmoseley/Mentor/amd-2014.05/build.genericx86-64-external/tmp/sysroots/genericx86-64 -r -o applets/built-in.o applets/ap
i686-pc-linux-gnu-ld: Relocatable linking with relocations from format elf64-x86-64 (applets/applets.o) to format elf32-i386 (applets/built-in.o) is not support
make[1]: *** [applets/built-in.o] Error 1
(From OE-Core rev: 088d2f0185da6648305b4719ee9cb0d2f2b37c6f)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, it would sleep 1 second when fail to add the user, this maybe
not enough when we use the sstate cache, as my test shows below, nearly
all the useradd actions are doing in the same minute when mirror from
ssate cache, and it would fail when the load is high, I got these time
by adding strace before the useradd for debugging:
2014-03-31 14:48:22.978079781 +0800 /tmp/log/pulseaudio.4.c
2014-03-31 14:48:22.028079813 +0800 /tmp/log/pulseaudio.1.c
2014-03-31 14:48:21.949079816 +0800 /tmp/log/pulseaudio.3.c
2014-03-31 14:48:20.903079852 +0800 /tmp/log/pulseaudio.2.c
2014-03-31 14:48:20.006079883 +0800 /tmp/log/nfs-utils.9.c
2014-03-31 14:48:18.876079923 +0800 /tmp/log/xuser-account.9.c
2014-03-31 14:48:18.824079924 +0800 /tmp/log/pulseaudio.0.c
2014-03-31 14:48:17.826079959 +0800 /tmp/log/xuser-account.8.c
2014-03-31 14:48:17.766079961 +0800 /tmp/log/nfs-utils.8.c
2014-03-31 14:48:16.794079995 +0800 /tmp/log/xuser-account.7.c
2014-03-31 14:48:16.735079997 +0800 /tmp/log/nfs-utils.7.c
2014-03-31 14:48:14.719080066 +0800 /tmp/log/xuser-account.5.c
2014-03-31 14:48:14.677080068 +0800 /tmp/log/nfs-utils.5.c
2014-03-31 14:48:12.621080139 +0800 /tmp/log/nfs-utils.3.c
2014-03-31 14:48:11.589080175 +0800 /tmp/log/nfs-utils.2.c
2014-03-31 14:48:10.242080221 +0800 /tmp/log/builder.0.c
2014-03-31 14:48:09.523080246 +0800 /tmp/log/nfs-utils.0.c
2014-03-31 14:48:09.488080248 +0800 /tmp/log/openssh.0.c
2014-03-31 14:48:09.485080248 +0800 /tmp/log/rpcbind.1.c
2014-03-31 14:48:07.590080313 +0800 /tmp/log/rpcbind.0.c
2014-03-31 14:28:15.437121590 +0800 /tmp/log/avahi.0.c
2014-03-31 14:18:19.067142238 +0800 /tmp/log/dbus.0.c
The nfs-utils and xuser-account are failed to add the user.
The useradd command needs two locks, passwd.lock and group.lock, it may
get one, but can't get another one if we look into these .c files, sleep
1 second is not enough, it needs more seconds, the reason is that, if
succeed, it doesn't have any side effects, if failed, we need wait for
more seconds rather than make it more crowding.
I've tried to use "sleep 5", but it didn't make much better since they
would sleep and wake up nearly at the same time, I also tried to use
"sleep <RANDOM seconds between 1 and 10>", that didn't make much better
,either.
I think that a better ways is sleep more and more seconds (up to 10
seconds) when failed, this can't fix the problem that they may do the
actions at the same time, but the logic is: if it is not crowding, sleep
less time should be OK, otherwise sleep more and more time.
Here is the testing result which seems much better:
2014-04-03 14:09:56.605185284 +0800 dbus.0.c
2014-04-03 14:09:39.899185862 +0800 rpcbind.5.c
2014-04-03 14:09:38.400185914 +0800 distcc.4.c
2014-04-03 14:09:35.206186025 +0800 pulseaudio.1.c
2014-04-03 14:09:33.979186067 +0800 rpcbind.4.c
2014-04-03 14:09:33.364186089 +0800 pulseaudio.0.c
2014-04-03 14:09:33.360186089 +0800 distcc.3.c
2014-04-03 14:09:30.996186171 +0800 avahi-ui.0.c
2014-04-03 14:09:30.298186195 +0800 distcc.2.c
2014-04-03 14:09:29.905186208 +0800 rpcbind.3.c
2014-04-03 14:09:29.410186226 +0800 avahi-ui.2.c
2014-04-03 14:09:28.239186266 +0800 distcc.1.c
2014-04-03 14:09:27.298186299 +0800 xuser-account.0.c
2014-04-03 14:09:27.032186308 +0800 distcc.0.c
2014-04-03 14:09:26.836186315 +0800 rpcbind.2.c
2014-04-03 14:09:25.846186349 +0800 nfs-utils.1.c
2014-04-03 14:09:25.752186352 +0800 avahi-ui.1.c
2014-04-03 14:09:24.779186386 +0800 builder.0.c
2014-04-03 14:09:24.746186387 +0800 rpcbind.1.c
2014-04-03 14:09:23.916186416 +0800 openssh.1.c
2014-04-03 14:09:23.848186418 +0800 nfs-utils.0.c
2014-04-03 14:09:23.594186427 +0800 rpcbind.0.c
2014-04-03 14:09:22.609186461 +0800 ppp-dialin.0.c
2014-04-03 14:09:21.817186488 +0800 openssh.0.c
[YOCTO #6085]
(From OE-Core rev: 9cedc786ba132935748bdca8bc33b56c366b531e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
if a task has a 'covered' indication, the list of tasks that
covered the task are computed and displayed. amended to add tooltip.
[YOCTO #5925]
(Bitbake rev: bb05ee13f53f10988579b6238802327732041d0c)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package count was incorrect because it was counting anonymous
packages. the full path of the image files was shortened to just
the filename.
[YOCTO 6087]
[YOCTO 6091]
(Bitbake rev: 06b190b2c23799bd2c9749be28e11bf5d59ed4fc)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add "on" before the date in the build status
* Get rid of the extra space before the "and" in the
build status
* Make the errors and warnings links in the build
status show the message content
* Make sure that the "Images" section in the left navigation
appears only for successful builds
* Link the number of packages installed to the "Packages
included" tab in the image information page
* Remove unnecessary inline styles in the dashboard
template
* Make sure target names in the h1 are listed in
alphabetical order
(Bitbake rev: 644a38e9a90728af52ebda9846d2037dd6831b41)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a known layout issue with Bootstrap tables in
Chrome. This change applies a css fix for it, and changes
the span classes in the variables table to improve
formatting.
(Bitbake rev: a7fee015b1cc34351d5ad8b854fc6bf368416400)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove a tag in all capitals
* Remove an unnecessary div
* Fix a typo
(Bitbake rev: 1ca139ca157d62cee9c48b22063e77614fa34325)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Link the number of errors to the #errors section in the
build dashboard
* Link the number of warnigns to the #warnings section in
the build dashboard
* Link the build time to the build time page
* Move some javascript that applies only to builddashboard.html
to that template from main.js
(Bitbake rev: 94c61d0d9ff24e0c781ea0a8e4bfea4c4ac94d4e)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the get_dict_value filter, there is the edge case where halted
builds can lead to IndexError errors in dictionary lookups, so we
need to catch those.
[YOCTO #6067]
(Bitbake rev: f6fcce974ce3b145bc472cd4e9721d56191828a4)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All help text strings have been reviewed by the
technical writer, and some of them by Paul Eggleton.
This patch implements their suggested changes.
(Bitbake rev: ce89530b178be2f3202d45523ef1340e00df05be)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the duplicated class attribute and the name
attribute.
Also, make sure that the row blue highlight works
without the name attribute when you land on the
tasks table after clicking the order link in a
task details page.
The commit also fixes a typo in default.css.
[YOCTO #6033]
(Bitbake rev: 471234f1ab1dbcd736a892720e99a305363db5ff)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some warnings and errors may come from a non-build context,
and they were not saved, even if they were counted for the current
build.
This patch saves these messages in memory until we have the
entire build context available.
[YOCTO #5642]
(Bitbake rev: fc7a74e7961775b5d7ff25298abed10138d24dc9)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We rename a local variable in as to prevent a conflict with
a similary named function parameter.
(Bitbake rev: f4e57f794651c4894600445e843ca9d5e104cd84)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure the REST API includes the latest changes
to the database schema.
(Bitbake rev: fb3d1d189f010488a8726872b01313857697751b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When linking from a task order number to the All Tasks
page, automatically display the correct page for that link
anchor.
[YOCTO #5933]
(Bitbake rev: e5b6681432b627eb73bfa766d3154162206f374e)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some time ago, the sstate name field was dropped. This code wouldn't have
worked since then. Makes me wonder if we really need it.
Anyhow, my last patch properly breaks it. This fixes the naming so
it works as designed again.
(From OE-Core rev: d282b276aa5e58d306be1c8ef9a985f2267a612b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A while ago we stopped supporting sstate names which were different from the
taskname. This patch finishes cleaning up some code remnants from that
which were causing data duplication and confusion.
(From OE-Core rev: 5a19863e389d28d8db4a86e409c1daa3c6b46eff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looking at the code, its clear 'task' is meant not to have the do_ prefix,
however its also clear it can be left in through some code paths.
One result of this can be files not being cleaned from the sysroot correctly.
Fix this.
(From OE-Core rev: 3c912102fd9ea6b360f1af209da21e8f27b845c0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* You need a rollover cable for the serial port
* Some minor grammar / typo / formatting fixes
(From meta-yocto rev: 79f01604e672ce0eb7af787c27ec561063222796)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been moved to meta-yocto-bsp-old; edgerouter replaces it as the
MIPS reference platform going forward.
(From meta-yocto rev: 74ae863b27878555445955337b19118968fabf6d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
In the dev-manual, I located instances where a note about using
VIRTURAL-RUNTIME_initscripts = "" in the local.conf file would
be appropriate. Three areas updated.
In the ref-manual, I located the note in the systemd.bbclass
section and the variable descriptions for SYSTEM_AUTO_ENABLE,
SYSTEM_PACKAGES, and SYSTEMD_SERVICE.
(From yocto-docs rev: 57b0acf2f3f8159b635b42dcffa129f7d945eb81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3686]
In the dev-manual, I created a new section called
"Making Images More Secure." The section explains in general
how to enable the security flags.
In the ref-manual, I updated the CFLAGS variable to point to the
new section.
(From yocto-docs rev: 3ed91a46eaf5c1fdf84369ea69951775d87a42da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5861]
Added a note to the SDKMACHINE glossary variable stating that you
can't set the variable in the distribution configuration file and if
you do, it won't get recognized.
(From yocto-docs rev: 8cdc14e553586f6a754dfc3a91cc9741eb1784ee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Text was written with release 1.5 in mind.
(From yocto-docs rev: de4906d9c49a9846e1907c1bd53070bf1d5ce991)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6045]
Added a sentence to the end of the variable's description indicating
how to enable building an ISO.
(From yocto-docs rev: 2806518155fdbb42b392a64b57a67c9259640f79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6064]
The directory name for the conf/distro/<distro>.conf file was
wrong. It was conf/<distro>.conf. I have corrected it.
(From yocto-docs rev: c8ae4fb23e76a45bbbd4e673311b3ec74980644d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is really only 1/2 of the section (the final half).
I put in the first half in a previous commit and pushed it before
realizing those changes were in that commit. The commit that
the first half of the migration changes are in is
88a075e6306349e5f8c0d53b5288ef1e64956cd3.
(From yocto-docs rev: 8f94391f86ee9643256979332fa06541fb8b16f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Richard Purdie
Cristiana Voicu
Matthieu Crapet
Irina Patru
Paul Eggleton
Martin Jansa
Tom Zanussi
Roy Li
Drew Moseley
Robert Yang
Farrell Wymore
Belen Barros Pena
David Reyna
Alexandru DAMIAN